Spin-Momentum Locking Induced Anisotropic Magnetoresistance in Monolayer WTe2.

Monolayer WTe2 is predicted to be a quantum spin Hall insulator (QSHI), and its quantized edge transport has recently been demonstrated. However, one of the essential properties of a QSHI, spin-momentum locking of the helical edge states, has yet to be experimentally validated. Here, we measure and observe gate-controlled anisotropic magnetoresistance (AMR) in monolayer WTe2 devices. Electrically tuning the Fermi energy into the band gap, a large in-plane AMR is observed and the minimum of the in-plane AMR occurs when the applied magnetic field is perpendicular to the current direction. In line with the experimental observations, the theoretical predictions based on the band structure of monolayer WTe2 demonstrate that the AMR effect originates from spin-momentum locking in the helical edge states of monolayer WTe2. Our findings reveal that the spin quantization axis of the helical edge states in monolayer WTe2 can be precisely determined from AMR measurements.

Gate-Controlled Magnetic Phase Transition in a van der Waals Magnet Fe5GeTe2.

Magnetic van der Waals (vdW) materials are poised to enable all-electrical control of magnetism in the two-dimensional limit. However, tuning the magnetic ground state in vdW itinerant ferromagnets by voltage-induced charge doping remains a significant challenge, due to the extremely large carrier densities in these materials. Here, by cleaving the vdW itinerant ferromagnet Fe5GeTe2 (F5GT) into 5.4 nm (around two unit cells), we find that the ferromagnetism (FM) in F5GT can be substantially tuned by the thickness. Moreover, by utilizing a solid protonic gate, an electron doping concentration of above 1021 cm-3 has been exhibited in F5GT nanosheets. Such a high carrier accumulation exceeds that possible in widely used electric double-layer transistors (EDLTs) and surpasses the intrinsic carrier density of F5GT. Importantly, it is accompanied by a magnetic phase transition from FM to antiferromagnetism (AFM). The realization of an antiferromagnetic phase in nanosheet F5GT suggests the promise of applications in high-temperature antiferromagnetic vdW devices and heterostructures.

Structure-Relaxivity Mechanism of an Ultrasmall Ferrite Nanoparticle T1 MR Contrast Agent: The Impact of Dopants Controlled Crystalline Core and Surface Disordered Shell.

Ultrasmall ferrite nanoparticles (UFNPs) have emerged as powerful magnetic resonance imaging (MRI) T1 nanoprobe for noninvasive visualization of biological events. However, the structure-relaxivity relationship and regulatory mechanism of UFNPs remain elusive. Herein, we developed chemically engineered 3.8 nm ZnxFe3-xO4@ZnxMnyFe3-x-yO4 (denoted as ZnxF@ZnxMnyF) nanoparticles with precise dopants control in both crystalline core and disordered shell as a model system to assess the impact of dopants on the relaxometric properties of UFNPs. It is determined that the core-shell dopant architecture allows the optimal tuning of r1 relaxivity for Zn0.4F@Zn0.4Mn0.2F up to 20.22 mM-1 s-1, which is 5.2-fold and 6.5-fold larger than that of the original UFNPs and the clinically used Gd-DTPA. Moreover, the high-performing UFNPs nanoprobe, when conjugated with a targeting moiety AMD3100, enables the in vivo MRI detection of small lung metastasis with greatly enhanced sensitivity. Our results pave the way toward the chemical design of ultrasensitive T1 nanoprobe for advanced molecular imaging.

Carbon Nanoflakes and Nanotubes from Halloysite Nanoclays and their Superior Performance in CO2 Capture and Energy Storage.

Nanoporous carbon (HNC) with a flake and nanotubular morphology and a high specific surface area is prepared by using natural halloysite nanotubes (HNTs), a low-cost and naturally available clay material with a mixture of flaky and tubular morphology. A controlled pore-filling technique is used to selectively control the porosity, morphology, and the specific surface area of the HNC. Activated nanoporous carbon (AHNC) with a high specific surface area is also prepared by using HNT together with the activation process with zinc chloride (ZnCl2). HNC exhibits flakes and tubular morphologies, which offer a high specific surface area (837 m2/g). The specific surface area of AHNC is 1646 m2/g, 74 times greater than the specific surface area of pure HNT (22.5 m2/g). These data revealed that the single-step activation combined with the nanotemplating results in creating a huge impact on the specific surface area of the HNC. Both HNC and AHNC are employed as adsorbents for CO2 adsorption at different pressures and adsorption temperatures. The CO2 adsorption capacity of AHNC is 25.7 mmol/g at 0 °C, which is found to be significantly higher than that of activated carbon (AC), mesoporous carbon (CMK-3), mesoporous carbon nitride (MCN-1), and multiwalled carbon nanotube (MWCNT). AHNC is also tested as an electroactive material and demonstrates good supercapacitance, cyclic stability, and high capacitance retention. Specific capacitance of AHNC in the aqueous electrolyte is 197 F/g at 0.3 A/g, which is higher than that of AC, MWCNT, and CMK-3. The technique adopted for the preparation of both HNC and AHNC is quite unique and simple, has the potential to replace the existing highly expensive and sophisticated mesoporous silica-based nanotemplating strategy, and could also be applied for the fabrication of series of advanced nanostructures with unique functionalities.

Confinement-Induced Giant Spin-Orbit-Coupled Magnetic Moment of Co Nanoclusters in TiO2 Films.

High magnetization materials are in great demand for the fabrication of advanced multifunctional magnetic devices. Notwithstanding this demand, the development of new materials with these attributes has been relatively slow. In this work, we propose a new strategy to achieve high magnetic moments above room temperature. Our material engineering approach invoked the embedding of magnetic nanoclusters in an oxide matrix. By precisely controlling pulsed laser deposition parameters, Co nanoclusters are formed in a 5 at % Co-TiO2 film. The presence of these nanoclusters was confirmed using transmission electron microscopy, energy-dispersive X-ray spectroscopy, and X-ray absorption fine structure. The film exhibits a very high saturation magnetization of 99 emu/cm3. Detailed studies using X-ray magnetic circular dichroism confirm that Co has an enhanced magnetic moment of 3.5 µB/atom, while the Ti and O also contribute to the magnetic moments. First-principles calculations supported our hypothesis that the metallic Co nanoclusters surrounded by a TiO2 matrix can exhibit both large spin and orbital moments. Moreover, a quantum confinement effect results in a high Curie temperature for the embedded Co nanoclusters. These findings reveal that 1-2 nm nanoclusters that are quantum confined can exhibit very large magnetic moments above room temperature, representing a promising advance for the design of new high magnetization materials.

Intrinsic or Interface Clustering-Induced Ferromagnetism in Fe-Doped In2O3-Diluted Magnetic Semiconductors.

Five percent Fe-doped In2O3 films were deposited using a pulsed laser deposition system. X-ray diffraction and transmission electron microscopy analysis show that the films deposited under oxygen partial pressures of 10-3 and 10-5 Torr are uniform without clusters or secondary phases. However, the film deposited under 10-7 Torr has a Fe-rich phase at the interface. Magnetic measurements demonstrate that the magnetization of the films increases with decreasing oxygen partial pressure. Muon spin relaxation (µSR) analysis indicates that the volume fractions of the ferromagnetic phases in PO2 = 10-3, 10-5, and 10-7 Torr-deposited samples are 23, 49, and 68%, respectively, suggesting that clusters or secondary phases may not be the origin of the ferromagnetism and that the ferromagnetism is not carrier-mediated. We propose that the formation of magnetic bound polarons is the origin of the ferromagnetism. In addition, both µSR and polarized neutron scattering demonstrate that the Fe-rich phase at the interface has a lower magnetization compared to the uniformly distributed phases.

Ultrasmall Ferrite Nanoparticles Synthesized via Dynamic Simultaneous Thermal Decomposition for High-Performance and Multifunctional T1 Magnetic Resonance Imaging Contrast Agent.

Large-scale synthesis of monodisperse ultrasmall metal ferrite nanoparticles as well as understanding the correlations between chemical composition and MR signal enhancement is critical for developing next-generation, ultrasensitive T1 magnetic resonance imaging (MRI) nanoprobes. Herein, taking ultrasmall MnFe2O4 nanoparticles (UMFNPs) as a model system, we report a general dynamic simultaneous thermal decomposition (DSTD) strategy for controllable synthesis of monodisperse ultrasmall metal ferrite nanoparticles with sizes smaller than 4 nm. The comparison study revealed that the DSTD using the iron-eruciate paired with a metal-oleate precursor enabled a nucleation-doping process, which is crucial for particle size and distribution control of ultrasmall metal ferrite nanoparticles. The principle of DSTD synthesis has been further confirmed by synthesizing NiFe2O4 and CoFe2O4 nanoparticles with well-controlled sizes of ∼3 nm. More significantly, the success in DSTD synthesis allows us to tune both MR and biochemical properties of magnetic iron oxide nanoprobes by adjusting their chemical composition. Beneficial from the Mn2+ dopant, the synthesized UMFNPs exhibited the highest r1 relaxivity (up to 8.43 mM-1 s-1) among the ferrite nanoparticles with similar sizes reported so far and demonstrated a multifunctional T1 MR nanoprobe for in vivo high-resolution blood pool and liver-specific MRI simultaneously. Our study provides a general strategy to synthesize ultrasmall multicomponent magnetic nanoparticles, which offers possibilities for the chemical design of a highly sensitive ultrasmall magnetic nanoparticle based T1 MRI probe for various clinical diagnosis applications.

Synthesis of Ferromagnetic Fe0.6 Mn0.4 O Nanoflowers as a New Class of Magnetic Theranostic Platform for In Vivo T1 -T2 Dual-Mode Magnetic Resonance Imaging and Magnetic Hyperthermia Therapy.

Uniform wüstite Fe0.6 Mn0.4 O nanoflowers have been successfully developed as an innovative theranostic agent with T1 -T2 dual-mode magnetic resonance imaging (MRI), for diagnostic applications and therapeutic interventions via magnetic hyperthermia. Unlike their antiferromagnetic bulk counterpart, the obtained Fe0.6 Mn0.4 O nanoflowers show unique room-temperature ferromagnetic behavior, probably due to the presence of an exchange coupling effect. Combined with the flower-like morphology, ferromagnetic Fe0.6 Mn0.4 O nanoflowers are demonstrated to possess dual-modal MRI sensitivity, with longitudinal relaxivity r1 and transverse relaxivity r2 as high as 4.9 and 61.2 mm(-1) s(-1) [Fe]+[Mn], respectively. Further in vivo MRI carried out on the mouse orthotopic glioma model revealed gliomas are clearly delineated in both T1 - and T2 -weighted MR images, after administration of the Fe0.6 Mn0.4 O nanoflowers. In addition, the Fe0.6 Mn0.4 O nanoflowers also exhibit excellent magnetic induction heating effects. Both in vitro and in vivo magnetic hyperthermia experimentation has demonstrated that magnetic hyperthermia by using the innovative Fe0.6 Mn0.4 O nanoflowers can induce MCF-7 breast cancer cell apoptosis and a complete tumor regression without appreciable side effects. The results have demonstrated that the innovative Fe0.6 Mn0.4 O nanoflowers can be a new magnetic theranostic platform for in vivo T1 -T2 dual-mode MRI and magnetic thermotherapy, thereby achieving a one-stop diagnosis cum effective therapeutic modality in cancer management.

Quantum dot capped magnetite nanorings as high performance nanoprobe for multiphoton fluorescence and magnetic resonance imaging.

In the present study, quantum dot (QD) capped magnetite nanorings (NRs) with a high luminescence and magnetic vortex core have been successfully developed as a new class of magnetic-fluorescent nanoprobe. Through electrostatic interaction, cationic polyethylenimine (PEI) capped QD have been firmly graft into negatively charged magnetite NRs modified with citric acid on the surface. The obtained biocompatible multicolor QD capped magnetite NRs exhibit a much stronger magnetic resonance (MR) T2* effect where the r2* relaxivity and r2*/r1 ratio are 4 times and 110 times respectively larger than those of a commercial superparamagnetic iron oxide. The multiphoton fluorescence imaging and cell uptake of QD capped magnetite NRs are also demonstrated using MGH bladder cancer cells. In particular, these QD capped magnetite NRs can escape from endosomes and be released into the cytoplasm. The obtained results from these exploratory experiments suggest that the cell-penetrating QD capped magnetite NRs could be an excellent dual-modality nanoprobe for intracellular imaging and therapeutic applications. This work has shown great potential of the magnetic vortex core based multifunctional nanoparticle as a high performance nanoprobe for biomedical applications.

Thiol-capped ZnO nanowire/nanotube arrays with tunable magnetic properties at room temperature.

The present study reports room-temperature ferromagnetic behaviors in three-dimensional (3D)-aligned thiol-capped single-crystalline ZnO nanowire (NW) and nanotube (NT) arrays as well as polycrystalline ZnO NT arrays. Besides the observation of height-dependent saturation magnetization, a much higher M(s) of 166 microemu cm(-2) has been found in NTs compared to NWs (36 microemu cm(-2)) due to larger surface area in ZnO NTs, indicating morphology-dependent magnetic properties in ZnO NW/NT systems. Density functional calculations have revealed that the origin of ferromagnetism is mainly attributed to spin-polarized 3p electrons in S sites and, therefore, has a strong correlation with Zn-S bond anisotropy. The preferential magnetization direction of both single-crystalline NTs and NWs lies perpendicular to the tube/wire axis due to the aligned high anisotropy orientation of the Zn-S bonds on the lateral (100) face of ZnO NWs and NTs. Polycrystalline ZnO NTs, however, exhibit a preferential magnetization direction parallel to the tube axis which is ascribed to shape anisotropy dominating the magnetic response. Our results demonstrate the interplay of morphology, dimensions, and crystallinity on spin alignment and magnetic anisotropy in a 3D semiconductor nanosystem with interfacial magnetism.

Single-crystalline MFe(2)O(4) nanotubes/nanorings synthesized by thermal transformation process for biological applications.

We report a general thermal transformation approach to synthesize single-crystalline magnetic transition metal oxides nanotubes/nanorings including magnetite Fe(3)O(4), maghematite gamma-Fe(2)O(3), and ferrites MFe(2)O(4) (M = Co, Mn, Ni, Cu) using hematite alpha-Fe(2)O(3) nanotubes/nanorings template. While the straightforward reduction or reduction-oxides process was employed to produce Fe(3)O(4) and gamma-Fe(2)O(3), the alpha-Fe(2)O(3)/M(OH)(2) core/shell nanostructure was used as precursor to prepare MFe(2)O(4) nanotubes via MFe(2)O(4-x) (0 < x < 1) intermediate. The transformed ferrites nanocrystals retain the hollow structure and single-crystalline nature of the original templates. However, the crystallographic orientation-relationships of cubic spinel ferrites and trigonal hematite show strong correlation with their morpologies. The hollow-structured MFe(2)O(4) nanocrystals with tunable size, shape, and composition have exhibited unique magnetic properties. Moreover, they have been demonstrated as a highly effective peroxidase mimic catalysts for laboratory immunoassays or as a universal nanocapsules hybridized with luminescent QDs for magnetic separation and optical probe of lung cancer cells, suggesting that these biocompatible magnetic nanotubes/nanorings have great potential in biomedicine and biomagnetic applications.