Arthroscopic lasso-loop technique for subscapularis repair with anterolateral viewing portal yields better clinical outcomes for Lafosse grade 3 and 4 tears: a prospective study with minimum 2 years of follow-up.

Background: Contracted subscapularis tears, especially Lafosse grade 3 and 4, pose a significant challenge in surgical repair due to the need for extensive release of retracted tendon and the risk of cut-through due to poor tissue quality. The posterior viewing portal may hinder adequate visualization and extensive release of retracted tendons, particularly in addressing the bursal surface of the tears. Tension-free robust repair is critical to prevent retears and for achieving successful outcomes for these massive and complex retracted tears. This study investigates the clinical outcomes of the Lasso-Loop technique with an anterolateral viewing portal, aiming to enhance tendon release, improve footprint fixation, and optimize tissue grip, particularly in cases of chronic retracted Lafosse 3 and 4 tears. This innovation also eliminates the need for arthroscope switching and serves as a crucial measure for averting axillary nerve injuries during the procedure. Methods: The study included 40 patients with isolated subscapularis or combined anterosuperior rotator cuff tears (Lafosse grade 3 and 4) that underwent arthroscopic subscapularis repair using a Lasso-Loop technique through an anterolateral viewing portal. Evaluations were conducted both preoperatively and at predefined postoperative intervals: 6 weeks, 3 months, 6 months, 1 year, and 2 years. The evaluations in this study encompassed a comprehensive range of clinical assessments, which included a complete range of movements, specialized tests for subscapularis muscle functionality (specifically the lift-off test and belly press test), the utilization of the University of California at Los Angeles and Oxford shoulder scoring systems, and a postoperative ultrasonography conducted at the 6-month mark to assess the presence of any retear. Clinical outcomes were compared with that of the opposite normal shoulder. Results: There was considerable improvement in the active painless range of motion postoperatively. During the 2-year follow-up, the positive belly press test decreased from 50% (n = 20) to 2.5% (n = 1), while the positive lift-off test decreased from 100% (n = 40) to 5% (n = 2). The modified University of California at Los Angeles score increased significantly from 10.15 preoperatively to 30.17 at 2 years postoperatively (P value = .001). Oxford's Shoulder Score increased significantly from 15.6 preoperatively to 40.64 at 2 years postoperatively (P value = .001). Conclusion: This technique has produced positive functional outcomes, in cases categorized as massive subscapularis tears and chronic tears indicating the superiority over other conventional techniques of subscapularis repair described in the literature.

Arthroscopic double row partial articular supraspinatus tendon avulsion bridge repair technique for shoulder: A transtendinous approach.

Partial articular supraspinatus tendon avulsion (PASTA) lesions, a subset of partial rotator cuff tears, pose a surgical challenge, disrupting the integrity of the supraspinatus tendon. Transtendinous repair is the preferred choice in young individuals for limiting tear progression and preserving intact, high-quality cuff tissue, thus preventing tendon shortening, as compared to the tear completion and repair technique. Our approach leverages these advantages, specifically those indicated for Ellman's Grade 3 tears and cases where conservative treatments have failed. In our technique, we employ progressive dilation, anchor drill sleeve insertion to facilitate medial row anchor placement, followed by percutaneous spinal needles for suture shuttling, and finally locking sliding knots for compressive medial row repair, followed by lateral row fixation for additional stability. This method accelerates rehabilitation and restores optimal shoulder function.

Teres minor denervation and pathologies resulting in shoulder joint instability and rotator cuff tears: A retrospective cross-sectional MRI study.

Teres minor denervation (TMD) has gained increasing attention in recent years, particularly with the advent of magnetic resonance imaging (MRI). The potential association between TMD and shoulder instability or rotator cuff tear remains a subject of interest in the orthopedic community. In this retrospective and cross-sectional study, authors aim to investigate the potential association between TMD and shoulder instability or rotator cuff tears. Authors retrospectively analyzed MRI findings from 105 patients with TMD, focusing on rotator cuff pathologies, posterior labrocapsular complex (PLCC) tears, and posteroinferior glenohumeral joint capsule alterations. Authors assessed the association between TMD and rotator cuff and PLCC tears. For the multivariate analysis, partial proportional odds models were constructed for subscapularis (SSC) and SSP tears. Rotator cuff tears were present in 82.9% of subjects, with subscapularis (SSC) tears being the most frequent (77.1%). A significant association was observed between TMD and rotator cuff pathology (P = .002). PLCC tears were found in 82.3% of patients, and humeral position relative to the osseous glenoid was noted in 60% of patients with TMD. A significant association was identified between TMD and shoulder instability or labral/capsular abnormalities (P < .001). More than half of the cases exhibited a long tethering appearance toward the axillary neurovascular bundle on T1-weighted sagittal images. Our findings suggest that TMD is significantly associated with rotator cuff tears and shoulder instability. This study highlights the importance of identifying and treating PLCC tears in patients with TMD to address shoulder instability. Further research is needed to elucidate the role of TMD in the pathogenesis of shoulder instability and rotator cuff pathology.

Arthroscopic Subscapularis Tendon Repair Using the Lasso-Loop Technique Through Anterolateral Viewing Portal.

The subscapularis is the strongest muscle among the rotator cuff muscles, and it provides a coupled balanced force across the glenohumeral joint by resisting the infraspinatus in axial plane and the shearing force of deltoid in the coronal plane. It is important to repair subscapularis tears to maintain the coupled balanced force. Subscapularis tendon tears are difficult to diagnose and treat. Only a small portion of the subscapularis tendon is visualized during routine arthroscopy, as it is largely covered by the middle and inferior glenohumeral ligaments. Various repair techniques have been described in the literature. Here, we describe the anterolateral viewing portal for better visualization of subscapularis and our preferred technique, the lasso-loop technique, which provides better tissue grip and improved functional outcome.

Does the Suprascapular Nerve Move within the Suprascapular Notch? Biomechanical Perspective Using the Finite Element Method.

PURPOSE: We aimed to analyze changes in suprascapular nerve (SSN) position within the suprascapular notch during in vivo shoulder abduction. MATERIALS AND METHODS: Three-dimensional models of the shoulder complex were constructed based on magnetic resonance imaging of the brachial plexus (BP-MR) in a patient diagnosed with SSN dysfunction but normal scapular movement. Using BP-MR in neutral position and computed tomography data on shoulder abduction, shoulder abduction was simulated as the transition between two positions of the shoulder complex with overlapping of a neutral and abducted scapula. SSN movement during abduction was evaluated using the finite element method. Contact stress on the SSN was measured in the presence and absence of the transverse scapular ligament (TSL). RESULTS: In the neutral position, the SSN ran almost parallel to the front of the TSL until entering the suprascapular notch and slightly contacted the anterior-inferior border of the TSL. As shoulder abduction progressed, contact stress decreased due to gradual loss of contact with the TSL. In the TSL-free scapula, there was no contact stress on the SSN in the neutral position. Towards the end of shoulder abduction, contact stress increased again as the SSN began to contact the base of the suprascapular notch in both TSL conditions. CONCLUSION: We identified changes in the position of the SSN path within the suprascapular notch during shoulder abduction. The SSN starts in contact with the TSL and moves toward the base of the suprascapular notch with secondary contact. These findings may provide rationale for TSL release in SSN entrapment.

Glenoid Orientation and Profile in Atraumatic or Microtraumatic Posterior Shoulder Instability: Morphological Analysis Using Computed Tomography Arthrogram.

BACKGROUND: Posterior shoulder instability (PSI) is a relatively uncommon condition that occurs in about 10% of patients with shoulder instability. PSI is usually associated with dislocations due to acute trauma and multidirectional instability, but it can also occur with or without recognizable recurrent microtrauma. The infrequency of atraumatic or microtraumatic PSI and the lack of a full understanding of the pathoanatomy and the knowledge of management can lead to misdiagnosis or delayed diagnosis. PURPOSE: To evaluate the morphologic factors of the glenoid that are associated with atraumatic or microtraumatic PSI. STUDY DESIGN: Cross-sectional study; Level of evidence, 3. METHODS: Enrolled in this study were patients who underwent arthroscopic posterior labral repair between January 2013 and March 2017 and were diagnosed with posterior glenohumeral instability by means of preoperative computed tomography arthrography (CTA) (n = 39; PSI group). These patients did not have any significant dislocation or subluxation episodes. The morphologic factors of the glenoid as revealed using CTA were compared with the CTA images from a sex-matched control group (n = 117) of patients without PSI who had been diagnosed with adhesive capsulitis in an outpatient clinic. The glenoid version and shape were evaluated between the 2 groups using the CTA findings, and the degree of centricity of the humeral head to the glenoid was assessed in the PSI group. Multivariate logistic regression analysis was performed to identify factors associated with PSI. RESULTS: The results of the multivariate logistic regression analysis indicated no statistically significant difference between the PSI and control groups regarding glenoid version or a flat-shaped glenoid. However, statistically significant between-group differences were found regarding convex glenoid shape, with an odds ratio of 5.39 (95% CI, 1.31-23.35; P = .0207). The proportion of eccentricity was significantly higher in the PSI group (21/39; 54%) versus the control group (47/117; 40%) (P = .031). CONCLUSION: The presence of convex glenoid shape was significantly associated with atraumatic or microtraumatic PSI. Humeral head eccentricity accounted for a high percentage of convex glenoid shape. However, there was no significant correlation between PSI and glenoid retroversion.

Calcific tendinitis of the shoulder in the Korean population: demographics and its relation with coexisting rotator cuff tear.

BACKGROUND: To evaluate the demographics, clinical and radiographic features of calcific tendinitis of the shoulder in the Korean population, specifically focusing on the incidence of coexisting rotator cuff tear. METHODS: Between October 2014 and January 2015, we performed a prospective multicenter study with 506 patients from 11 training hospitals in Korea. We collected data of demographics and radiographic analysis based on simple radiographs, clinical assessments based on visual analog scale (VAS) and the American Shoulder Elbow Surgeons (ASES) score, and treatment modalities that are used currently. We also evaluated coexisting rotator cuff tear by ultrasonography (US) or magnetic resonance imaging (MRI) images. RESULTS: There were 402 female patients (79%) with mean age of 55 years (range, 31-87 years). Mean duration of symptoms was 16 months. Mean size of calcific materials was 11.4 mm (range, 0-35 mm). Mean value of VAS and ASES scores were 6.5 (range, 1-10) and 47 (range, 8-95), respectively. Of 383 patients (76%), 59 (15%) had rotator cuff tear including 15 full-thickness tears on US or MRI. Patients with rotator cuff tears were significantly associated with older age, recurrent symptoms, menstrual disorders in females, and having undergone calcification removal surgery and rotator cuff repair (all p<0.05). CONCLUSIONS: This study reported demographic, radiographic, and clinical features of calcific tendinitis of the shoulder in Korean population, which were not different from those of Western population. Coexisting rotator cuff tear was found with 15% incidence in this large series, suggesting that further radiographic study to evaluate rotator cuff tear might be needed in some calcific tendinitis patients of older age and presenting with recurrent symptoms.

Comparison of Hook Plate Fixation Versus Arthroscopic Coracoclavicular Fixation Using Multiple Soft Anchor Knots for the Treatment of Acute High-Grade Acromioclavicular Joint Dislocations.

PURPOSE: To compare the clinical and radiologic outcomes of arthroscopically assisted coracoclavicular (CC) fixation using multiple soft anchor knots versus hook plate fixation in patients with acute high-grade Rockwood type III and V acromioclavicular (AC) joint dislocations. METHODS: This retrospective study included 22 patients with acute Rockwood type III and V AC joint dislocations who underwent arthroscopic fixation or hook plate fixation surgery between February 2016 and March 2018. Patients were categorized into 2 groups: arthroscopically assisted CC fixation using multiple soft anchor knots group (AR, n = 12) and hook plate fixation group (HO, n = 10). We measured the CC distances (CCDs) and CCD ratio at 6 months, 1 year, and last follow-up postoperatively to compare the radiologic results between the groups. Clinical outcomes were assessed at 1 year postoperatively and at the last follow-up using the Visual Analog Scale, American Shoulder and Elbow Surgeons (ASES) scores, and Shoulder Pain and Disability Index (SPADI) scores, and the Disabilities of the Arm, Shoulder, and Hand (DASH) questionnaire. Magnetic resonance imaging after hook plate removal was used to evaluate the healing ligaments and tendon-bone interface. RESULTS: The patients in the AR group had better ASES, SPADI, and Quick DASH scores than the patients in the HO group at 1 year postoperatively and at last follow-up. The CCD and CCD ratio were significantly better in the AR group than in the HO group at the last follow-up period (P = .007/0.029). Magnetic resonance imaging findings showed grade I in 60% of patients in the AR group and grade III in 60% of patients in the HO group. AC joint arthritic change was observed in 40% of the HO group. CONCLUSIONS: The CC fixation method using multiple soft anchor knots showed satisfactory results and had superior CC ligament healing ability and maintenance of CCD than hook fixation. LEVEL OF EVIDENCE: Level III, retrospective therapeutic comparative investigation.

Arthroscopic Iliac Bone Block Augmentation for Glenoid Reconstruction: Transglenoid Fixation Technique Using an All-Suture Anchor.

Arthroscopic Bankart repair of anterior instability has shown relatively good results, but its effectiveness is unclear in cases wherein there is a bone defect in the glenoid bone. The surgical management of recurrent anterior shoulder instability with severe glenoid bone loss has been challenging until now. Therefore the Latarjet procedure was introduced as an alternative that provided good results in cases of full instability with a bone defect. In cases of recurrent anterior shoulder instability, bone defects are often present within the glenoid. To restore glenohumeral stability, a bone augmentation procedure is required, and the Latarjet procedure to use bony transfer from the coracoid is the most popular technique. However, resorption of the bone graft with metal screw protrusion is a serious concern, whereas the relative contribution of the dynamic sling effect of the Latarjet procedure remains controversial. The Latarjet procedure also destroys the normal kinematics, resulting in side effects such as scapular dyskinesia. Here we introduce an arthroscopic anterior bone block procedure for reconstructing anterior glenoid bone defects using an autologous iliac crest graft. This technique enables precise bone block placement and fixation using one all-suture anchor instead of screw fixation.

Effect of suprascapular nerve injury on rotator cuff enthesis.

BACKGROUND: Numerous reports have shown that retracted rotator cuff tears may cause suprascapular nerve injury, and nerve injury causes atrophy and fat accumulation in the rotator cuff muscles. However, the effect of suprascapular nerve injury on rotator cuff enthesis has not been directly defined. This study aimed to investigate the effect of suprascapular nerve injury on rotator cuff enthesis. METHODS: Twenty-four Wistar albino rats underwent bilateral transection of the suprascapular nerve. Additional 6 rats were used as the sham group. Bilateral supraspinatus and infraspinatus entheses were examined after 1, 4, 8, and 12 weeks of nerve transection. Histomorphometric analyses were performed for each zone of enthesis. RESULTS: Compared with normal enthesis, significant and consistent decrease in cellularity were observed in the tendon and bone at all time points (P < .001). Collagen bundle diameter in the tendon also decreased in a similar manner (P < .001). Apart from the tendon and bone zones, fibrocartilage and calcified fibrocartilage zones showed similar response, and significant decrease in cellularity was observed 8 weeks after nerve transection (P < .001). CONCLUSION: This study identifies suprascapular nerve injury as an underlying mechanism leading to compromise of the rotator cuff enthesis structure. Suprascapular nerve injury may be considered as an etiologic factor for the impaired healing after repair of a massive tear.

Arthroscopic Coracoclavicular Fixation Technique Using Multiple All-Suture Anchors.

Acromioclavicular (AC) joint dislocation is a common injury, particularly among active young individuals. Numerous surgical procedures for treating acute, high-grade AC joint dislocation have been reported. However, no standard surgical procedure that restores the normal kinematics of the AC joint is available. Among the available coracoclavicular (CC) fixation techniques, cortical button fixation was recently introduced, and it has had successful outcomes. Moreover, it is advantageous because it can be used in arthroscopic procedures. However, because of the limited number of fixation tools, a fundamental problem in terms of horizontal instability and gradual subsidence of cortical buttons has been observed, eventually leading to a threat to vertical stability. Therefore, we developed a unique CC fixation technique with multiple small tunnels using all-suture anchors, which may overcome potential complications caused by cortical buttons that require bone tunnels with relatively large diameters. This arthroscopic CC fixation technique was designed to achieve the ideal horizontal and vertical stability that may restore native AC kinematics.

Analysis of impingement-free range of motion of the glenohumeral joint after reverse total shoulder arthroplasty using three different implant models.

BACKGROUND: This study aimed to investigate impingement-free range of motion (ROM) of the glenohumeral joint following reverse total shoulder arthroplasty (RTSA) with three types of implant models using computational motion analysis. METHODS: Three-dimensional (3D) scapulohumeral models were created from preoperative computed tomography (CT) images of seven patients by using visualization and computer-aided design software. Three types of implant designs, namely, typical medialization, in between, and lateralization implants, were used for the reconstruction of 3D model; each design was designated as group I, II, and III, respectively. All possible combinations of virtual surgeries were evaluated for impingement-free ROM in all three groups. Maximal ROMs were compared. The effect of implant positions on ROM of the shoulder joints were investigated in each group. RESULTS: The all lateralization group (group III) showed significantly greatest maximal adduction, abduction and external rotation (ER). Adduction and abduction were significantly increased by the glenoid component inferior translation in all three groups. (In group I, p < 0.001 for adduction, p = 0.002 for abduction, respectively; in group II, p = 0.025, p < 0.001, respectively; in group III, p = 0.038, p = 0.011, respectively). Increasing humerus retroversion might have some effect on increasing abduction. In group II and III, internal rotation (IR) and ER were significantly affected by the humerus retroversion (in group II, p = 0.033 for IR, p = 0.007 for ER, respectively; in group III, p = 0.004, p < 0.001, respectively). In group III, ER was also significantly affected by the glenoid component inferior translation (p = 0.003). CONCLUSIONS: Lateralization design model showed greatest ROM of the shoulder joint. The effects of implant positions on impingement-free ROM exhibited different tendencies between medialization and lateralization implant models. Humerus retroversion affected both IR and ER, especially in lateralization design. Increasing glenoid inferior translation increases both adduction and abduction regardless of implant designs.

Arthroscopic Coracoclavicular Fixation Using Multiple Low-Profile Devices in Acute Acromioclavicular Joint Dislocation.

PURPOSE: To introduce an arthroscopically assisted coracoclavicular (CC) fixation technique using multiple low-profile devices to evaluate the clinical and radiologic outcomes in patients with acute high-grade acromioclavicular (AC) joint dislocation. METHODS: Between July 2014 and September 2015, cases of AC joint dislocation that were treated with arthroscopic CC fixation using multiple low-profile devices with a minimum follow-up of 24 months were included. We measured the vertical coracoclavicular distance (CCD) on the anteroposterior view and the horizontal acromioclavicular distance on 3-dimensional computed tomography images to evaluate the changes in radiologic outcomes before and after surgery. We compared final radiologic outcomes between initial AC reduction groups based on hierarchical clustering. Clinical outcomes were evaluated using the Constant-Murley score. RESULTS: We enrolled 27 patients in total, and the mean follow-up period was 27.2 months. The mean CCD of the injured shoulder was 13.68 ± 3.98 mm preoperatively and decreased to 5.72 ± 1.68 mm immediately postoperatively but increased to 7.32 ± 2.29 mm at last follow-up (P = .07). Horizontal displacement of the distal clavicle was 1.1 ± 1.0 mm immediately postoperatively but decreased to 0.9 ± 0.6 mm at last follow-up (P < .05). In particular, in the 2 groups that were determined using the hierarchical cluster analysis, patients with excellent recovery of the initial CCD (20 patients) showed less of an increase in the CCD at last follow-up than did those in the other group (7 patients) (P < .001). The Constant-Murley score was 93.5 ± 2.7 points on the injured side at last follow-up (P = .074). CONCLUSIONS: Our CC fixation technique with multiple low-profile devices exhibited satisfactory clinical and radiologic outcomes. In particular, ensuring good initial recovery of the CCD and the precise placement and location of the AC joints was important in maintaining the proper AC position at the final follow-up. LEVEL OF EVIDENCE: Level IV, case series.

Arthroscopically Assisted Coracoclavicular Fixation Using a Single Flip Button Device Technique: What Are the Main Factors Affecting the Maintenance of Reduction?

BACKGROUND: Among coracoclavicular (CC) fixation techniques, the use of flip button device was demonstrated to have successful outcomes with the advantage of being able to accommodate an arthroscopic procedure. PURPOSE: This study was conducted to investigate the factors associated with loss of fixation after arthroscopically assisted CC fixation using a single flip button device for acromioclavicular (AC) joint dislocations. MATERIALS AND METHODS: We enrolled a total of 47 patients (35 men and 12 women). Plain radiography was performed at a mean of 24 months postoperatively to evaluate the final radiological outcome. The primary outcome measure was a long-term reduction of the AC joint for at least 24 months. RESULTS: We found that 29 patients had a high quality reduction (61.7%) and 18 patients had a low quality reduction (38.3%) in initial postoperative CT findings. Our study showed that the duration (5 days) from injury to treatment and the quality of initial postoperative reduction were significantly associated with the maintenance of reduction at final follow-up. CONCLUSION: Our study showed that maintaining stable reduction after arthroscopically assisted CC fixation using a single flip button device technique is difficult especially in patients who received delayed treatment or whose initial reduction quality was poor.

Arthroscopic Intra-articular Spinoglenoid Cyst Resection Following SLAP Repair.

Spinoglenoid cyst (SGC) is a ganglion arising in the spinoglenoid notch and is thought to be related to SLAP lesion. This cyst often compresses the suprascapular nerve in the spinoglenoid notch. Symptomatic cysts require surgical treatment when conservative treatment fails. In particular, arthroscopic decompression through the torn labral tissue when the cyst is extending into the joint cavity is easy and convenient. However, if the cyst is confined to the spinoglenoid notch, arthroscopic approach through the torn labral tissue is challenging. Thus, we present our preferred technique of addressing the SGC through an additional superior capsular window after completing SLAP repair. We believe that our technique is easy, reproducible, and reasonable.

A Comparison between Clinical Results of Selective Bundle and Double Bundle Anterior Cruciate Ligament Reconstruction.

PURPOSE: The purpose of this study was to compare the clinical outcomes of arthroscopic anatomical double bundle (DB) anterior cruciate ligament (ACL) reconstruction with either selective anteromedial (AM) or posterolateral (PL) bundle reconstruction while preserving a relatively healthy ACL bundle. MATERIALS AND METHODS: The authors evaluated 98 patients with a mean follow-up of 30.8±4.0 months who had undergone DB or selective bundle ACL reconstructions. Of these, 34 cases underwent DB ACL reconstruction (group A), 34 underwent selective AM bundle reconstruction (group B), and 30 underwent selective PL bundle reconstructions (group C). These groups were compared with respect to Lysholm and International Knee Documentation Committee (IKDC) score, side-to-side differences of anterior laxity measured by KT-2000 arthrometer at 30 lbs, and stress radiography and Lachman and pivot shift test results. Pre- and post-operative data were objectively evaluated using a statistical approach. RESULTS: The preoperative anterior instability measured by manual stress radiography at 90° of knee flexion in group A was significantly greater than that in groups B and C (all p<0.001). At last follow-up, mean side-to-side instrumented laxities measured by the KT-2000 and manual stress radiography were significantly improved from preoperative data in all groups (all p<0.001). There were no significant differences between the three groups in anterior instability measured by KT-2000 arthrometer, pivot shift, or functional scores. CONCLUSION: Selective bundle reconstruction in partial ACL tears offers comparable clinical results to DB reconstruction in complete ACL tears.

Shoulder Stiffness: Current Concepts and Concerns.

UNLABELLED: Shoulder stiffness can be caused by various etiologies such as immobilization, trauma, or surgical interventions. The Upper Extremity Committee of ISAKOS defined the term "frozen shoulder" as idiopathic stiff shoulder, that is, without a known cause. Secondary stiff shoulder is a term that should be used to describe shoulder stiffness with a known cause. The pathophysiology of frozen shoulder is capsular fibrosis and inflammation with chondrogenesis, but the cause is still unknown. Conservative treatment is the primary choice. Pain control by oral medication, intra-articular injections with or without joint distension, and physical therapy are commonly used. In cases with refractory stiffness, manipulation under anesthesia or arthroscopic capsular release may be indicated. Because of various potential risks of complications with manipulations, arthroscopic capsular release is preferred. After the capsular release, stepwise rehabilitation is mandatory to achieve satisfactory outcome. LEVEL OF EVIDENCE: Level V, evidence-based review.

Which Is Better for Arthroscopic Tenodesis of the Long Head of the Biceps: Soft Tissue or Bony Interference Fixation?

PURPOSE: To compare the outcome between arthroscopic soft tissue tenodesis (STT) at the rotator interval and bony interference fixation tenodesis (BIFT) at the distal bicipital groove for the long head of the biceps (LHB). METHODS: Twenty-five shoulders that underwent arthroscopic STT of the LHB were compared with 28 shoulders that underwent arthroscopic BIFT using a 5.5-mm Bio-Tenodesis screw (Arthrex, Naples, FL). American Shoulder and Elbow Surgeons scores, Constant score, and elbow flexion strength index (EFSI) were checked preoperatively, postoperative 1 year and 2 years. Ultrasound imaging evaluation took place at 1 year and 2 years postoperatively as well. RESULTS: The overall functional outcomes improved after surgery in both groups. The BIFT group showed a significant increase in EFSI (preop: 0.54, postoperative 2 years: 0.94) compared with that of the STT group (preop: 0.52, postoperative 2 years: 0.74) at postoperative 2 years (P = .006). However, no significant difference was seen in the increase of American Shoulder and Elbow Surgeons scores and Constant scores between the two groups. At postoperative 2 years, ultrasound showed seven empty grooves in the STT group, but only two empty grooves in the BIFT group (P = .046). CONCLUSIONS: Arthroscopic BIFT for the LHB showed better improvement in EFSI than arthroscopic STT. In addition, the STT group showed a higher failure rate than the BIFT group. LEVEL OF EVIDENCE: Level III, retrospective comparative study.

Locked bucket-handle type bony Bankart lesion resulting from manipulation.

A patient who underwent manipulation for stiffness accompanying a rotator cuff tear experienced a complication consisting of a bony Bankart lesion connected to the superior and inferior labrum. This lesion was displaced posteriorly, locked behind the humeral head and blocking the reduction. Attachment of the labrum to this fragment made reduction and fixation easier. This bony Bankart lesion was fixed successfully by arthroscopic placement of knotless suture anchors. Level of evidence Case report, Level IV.

Stress Distribution in Superior Labral Complex and Rotator Cuff During In Vivo Shoulder Motion: A Finite Element Analysis.

PURPOSE: To quantitatively and qualitatively evaluate the impingement behavior between structures within the glenohumeral joint under simulated abduction-external rotation (ABER) motion using finite element analysis. METHODS: Computed tomography (CT) scanning of 1 shoulder in a volunteer was performed at 0° and 120° of shoulder abduction with external rotation (ABER position), followed by magnetic resonance imaging at 0° of abduction. The CT and magnetic resonance images were then imported into a customized software program to undergo 3-dimensional reconstruction followed by finite element modeling of the bone and soft tissue including the upper part of the rotator cuff and glenohumeral labral complex. Glenohumeral motion from 0° to the ABER position was simulated by CT images in 2 different humeral positions. On the basis of simulated humeral motion with respect to the scapula, we measured the stress value on the biceps-labral complex and upper part of the rotator cuff as a consequence of their structural deformation. In addition, we intended to design 2 types of labra--a normal stable labrum and an unstable posterosuperior labrum--to evaluate the geometric alteration and resulting stress change on the posterosuperior labrum against a compressive force from the humeral head and rotator cuff. RESULTS: In the ABER position, the posterosuperior labrum was deformed by the humeral head and interposed posterior part of the rotator cuff. When viewed from the rotator cuff, the posterior part of the rotator cuff came into contact with the posterosuperior labrum as external rotation increased. The measured peak contact stress values were 19.7 MPa and 23.5 MPa for the posterosuperior labrum and the upper rotator cuff, respectively. The stress values for both structures decreased to 5.8 MPa and 18.1 MPa, respectively, in the simulated SLAP model. The root of the long head of the biceps became compressed halfway through the range of motion by the humeral head, especially from the part involving horizontal extension and external rotation, resulting in a high stress of 22.4 MPa. CONCLUSIONS: In this simulated SLAP model, the posterosuperior labrum was medially displaced by the humeral head and upper rotator cuff in the ABER position, causing a functional loss of the spacer effect. CLINICAL RELEVANCE: In SLAP lesions, the posterosuperior labrum loses its ability to function as a spacer in certain positions (especially ABER) and may decrease the important spacer effect between the humerus and the rotator cuff; this may lead to posterosuperior subluxation of the humeral head or rotator cuff abnormalities and tears during repetitive ABER tasks.