Improved Separation in Horizontal Protein SDS-PAGE with Double-Deck Flat Electrodes and a Field Inversion Gel Electrophoresis Module.

The horizontal flatbed electrophoresis method is employed to separate protein samples, providing greater flexibility for various electrophoretic applications and easier sample loading compared to its vertical counterpart. In the currently available equipment setup, cathode and anode electrodes are positioned on top of a gel at each end. Since an electric field enters the gel from the top, its strength gradually weakens from the top to the bottom of the gel. When examining the interior of gels following electrophoretic separation, the uneven electric field causes the protein bands to lie down forward in the direction of migration, leading to an increase in bandwidth. This issue has remained unaddressed for several decades. To address this problem, new clamp-shaped and double-deck electrodes were developed to apply an electric field simultaneously from both the top and bottom of the gel. Both of these new electrodes facilitated the formation of perpendicular protein band shapes and enhanced resolution at a comparable level. Due to their ease of use, double-deck electrodes are recommended. By combining these new electrodes with the field inversion gel electrophoresis (FIGE) technique, the protein bands could be focused and aligned nearly vertically, resulting in the highest level of electrophoretic resolution. Our electrodes are compatible with polyacrylamide gels of varying sizes, buffer systems, and sample well formats. They can be easily manufactured and seamlessly integrated into existing laboratory instruments for practical use.

Juggling with fluorescent proteins: Spectrum and structural changes of the mCardinal2 variants.

mCardinal2 is a red fluorescent protein developed through the designs of mKate, mNeptune and mCardinal. Fluorescence spectrums of mCardinal2 and its five mutants (T143C, T143G, C158A, C158D and M160E) were measured with their quantum yields. C158A and C158D increased brightness with slight changes in fluorescence spectrums while T143C, T143G and M160E decreased brightness with blue shift in fluorescence spectrums, which resulted in green, cyan and green fluorescent proteins respectively. Crystal structures of all six variants were analyzed and compared together with those of mKate, LSS-mKate1, LSS-mKate2 and mCardinal. Around the Cα-Cß bond of Tyr64 in the MYG chromophores, only C158A and C158D were in the trans conformation while all others were mostly in the cis conformation. Blue-shift brightness-decreased variants (T143C, T143G and M160E) showed the diminished hydrogen bonds while large-Stoke-shift brightness-increased variant C158D showed the enhanced hydrogen bonds around the chromophore.

Binding mode of brazzein to the taste receptor based on crystal structure and docking simulation.

Several natural substances including protein produce sweet taste. Brazzein, derived from the plant Pentadipladra brazzeana, is one of the sweet proteins that bind to the taste receptor with stronger sweetness than sugar. Mutations of this protein affect its flavour, yielding higher sweetness in D29K and lower sweetness in R43A. To elucidate its sweet mechanism in the taste receptor, we determined the structures of two variants, D29K and R43A, to a resolution of 1.5 Å and 1.3 Å, respectively. Structures of the brazzein exhibit two α-helix and three ß-sheets connected by four disulfide bonds with a significantly altered electrostatic distribution on the surface. Using the high-resolution structure data and models of the taste receptors T1R2 and T1R3 in the AlphaFold Protein Structure Database, we performed a docking calculation on the receptors and report that brazzein is bound between the two cysteine rich domains (CRDs) of the heterodimer protein complex. Substitution to lysine in D29K resulted in an increased number of hydrogen bonds in the T1R2 receptor, while substitution to alanine in R43A ablated a polar interaction in the T1R3 receptor. The significantly altered interaction of the variants at the interface is consistent with a change of the sweetness. The high-resolution structure and the docking model in this study may provide a structural basis to understand the flavour mechanism induced by the sweet protein.

Acoustofluidic Separation of Proteins Using Aptamer-Functionalized Microparticles.

We propose an acoustofluidic method for the triseparation of proteins conjugated with aptamer-coated microparticles inside a microchannel. Traveling surface acoustic waves (TSAWs) produced from a slanted-finger interdigital transducer (SFIT) are used to separate the protein-loaded microparticles of different sizes via the TSAW-driven acoustic radiation force (ARF). The acoustofluidic device consists of an SFIT deposited onto a piezoelectric lithium niobate substrate and a polydimethylsiloxane (PDMS) microfluidic channel on top of the substrate. The TSAWs propagating on the substrate penetrate into the sample fluid flow, where the human protein-conjugated microparticles are suspended, inside the PDMS microchannel. The microparticles are subjected to the TSAW-driven ARF with varying magnitude depending on their size and thus flow along different streamlines, leading to triseparation of the proteins. In this work, we used two different-sized streptavidin-functionalized polystyrene (PS) microparticles to capture two kinds of aptamers (apt15 and aptD17.4), which were labeled with a respective biotin molecule at one end. The biotin ends of the aptamers were attached to the microparticles through streptavidin-biotin linkage, whereas the free ends of the aptamers were used to capture their target proteins of thrombin (th) and immunoglobulin E (IgE). The resultant PS-apt15-th and PS-aptD17.4-IgE complexes, as well as mCardinal2, were used for experimental demonstration of acoustofluidic triseparation of the human proteins. We achieved simultaneous separation of proteins of three kinds (th, IgE, and mCardinal2) for the first time via the TSAW-driven ARF in the proposed acoustofluidic device.

Spreader-CDR system for efficient, reproducible, and frugal western blot.

Efficient antibody incubation is a vital step for successful western blot. During the incubation, a thin antibody-depleted layer is created around the blotting membrane, which limits antibody binding. Although the conventional batch shaking method is ineffective against it, this layer can be easily disrupted by cyclic draining and replenishing (CDR) of the antibody solution during membrane incubation. Previously, we introduced a closed and rotating cylindrical chamber as a tool to implement CDR for western blots (rCDR). A new open bucket-style chamber was devised for easier operation and the possibility of process automation. Instead of rotation as in rCDR, rocking it back and forth achieved the CDR antibody incubation (R-CDR). The chamber was then equipped with a spreader-rod to facilitate the uniform movement of the antibody solution across the membrane surface. Hence, it was named spreader CDR (S-CDR). Compared to the batch incubation method, both the S-CDR and R-CDR devices produced significantly enhanced signals and developed faster results. There were several additional benefits of using the spreader-rod, which included uniform antibody binding across the membrane, reduced usage of antibodies, and the ability to recover results even from mishandled, creased membranes. The S-CDR device ensures better blots and can be easily implemented in existing western blot protocols.

Lane-Level Map-Matching Method for Vehicle Localization Using GPS and Camera on a High-Definition Map.

Accurate vehicle localization is important for autonomous driving and advanced driver assistance systems. Existing precise localization systems based on the global navigation satellite system cannot always provide lane-level accuracy even in open-sky environments. Map-based localization using high-definition (HD) maps is an interesting method for achieving greater accuracy. We propose a map-based localization method using a single camera. Our method relies on road link information in the HD map to achieve lane-level accuracy. Initially, we process the image-acquired using the camera of a mobile device-via inverse perspective mapping, which shows the entire road at a glance in the driving image. Subsequently, we use the Hough transform to detect the vehicle lines and acquire driving link information regarding the lane on which the vehicle is moving. The vehicle position is estimated by matching the global positioning system (GPS) and reference HD map. We employ iterative closest point-based map-matching to determine and eliminate the disparity between the GPS trajectories and reference map. Finally, we perform experiments by considering the data of a sophisticated GPS/inertial navigation system as the ground truth and demonstrate that the proposed method provides lane-level position accuracy for vehicle localization.

Differential proteomic analyses of green microalga Ettlia sp. at various dehydration levels.

Water deprivation could be a lethal stress for aquatic and aero-terrestrial organisms. Ettlia sp. is a unicellular photosynthetic freshwater microalga. In the present study, proteomic alterations and physiological characteristics of Ettlia sp. were analyzed to comprehend the molecular changes in dehydrated conditions. Varying levels of dehydration were achieved by incubating drained Ettlia sp. in different relative humidity environments for 24  hours. Using a comparative proteomic analysis, 52 differentially expressed protein spots were identified that could be divided into eight functional groups. The PCA analysis of normalized protein expression values demonstrated a clear segregation of protein expression profiles among different dehydration levels. Identified proteins could be grouped into four clusters based on their expression profiles. Proteins relating to photosynthesis comprised the largest group with 25% of the identified proteins that were decreased in dehydrated samples and belonged to cluster I. The photosynthetic activities were measured with rehydrated Ettlia sp. These results revealed that photosynthesis remained inhibited over extended time in response to dehydration. The expressions of reactive oxygen species (ROS) scavenger proteins increased in strong dehydration and were assigned to cluster III. Carbon metabolism proteins were suppressed, which might limit energy consumption, whereas glycolysis was activated at mild dehydration. The accumulation of desiccation-associated late embryogenesis proteins might inhibit the aggregation of housekeeping proteins. DNA protective proteins were expressed higher in the dehydrated state, which might reduce DNA damage, and membrane-stabilizing proteins increased in abundance in desiccation. These findings provide an understanding of Ettlia's adaptation and survival capabilities in a dehydrated state.

Rapid and efficient western blot assay by rotational cyclic draining and replenishing procedure.

Western blot is a principal technique for the detection of specific proteins in various biology disciplines. The antibody incubation is an imperative step in western blot. Antibody incubation by mild shaking on a rocker is generally used to facilitate mixing of antibodies. However, mild shaking is an inefficient process to remove antibody depletion layer on blotting membrane and requires hours of incubation time to achieve antibody binding to target proteins. We propose an alternative method of cyclic draining and replenishing (CDR) incubation of antibody solution using a rotational incubation chamber. The study demonstrated that rotational CDR incubation could shorten antibody incubation time with enhanced sensitivity. Moreover, rotational CDR incubation could achieve a stronger antibody binding with lower antibody concentration when compared with batch incubation. In addition, rotational CDR incubation significantly improved the detection of low abundance proteins. This simple modification in western blot procedure makes it rapid, sensitive, and cost-efficient.

Towards a Meaningful 3D Map Using a 3D Lidar and a Camera.

Semantic 3D maps are required for various applications including robot navigation and surveying, and their importance has significantly increased. Generally, existing studies on semantic mapping were camera-based approaches that could not be operated in large-scale environments owing to their computational burden. Recently, a method of combining a 3D Lidar with a camera was introduced to address this problem, and a 3D Lidar and a camera were also utilized for semantic 3D mapping. In this study, our algorithm consists of semantic mapping and map refinement. In the semantic mapping, a GPS and an IMU are integrated to estimate the odometry of the system, and subsequently, the point clouds measured from a 3D Lidar are registered by using this information. Furthermore, we use the latest CNN-based semantic segmentation to obtain semantic information on the surrounding environment. To integrate the point cloud with semantic information, we developed incremental semantic labeling including coordinate alignment, error minimization, and semantic information fusion. Additionally, to improve the quality of the generated semantic map, the map refinement is processed in a batch. It enhances the spatial distribution of labels and removes traces produced by moving vehicles effectively. We conduct experiments on challenging sequences to demonstrate that our algorithm outperforms state-of-the-art methods in terms of accuracy and intersection over union.

Acoustic Wave-Driven Functionalized Particles for Aptamer-Based Target Biomolecule Separation.

We developed a hybrid microfluidic device that utilized acoustic waves to drive functionalized microparticles inside a continuous flow microchannel and to separate particle-conjugated target proteins from a complex fluid. The acoustofluidic device is composed of an interdigitated transducer that produces high-frequency surface acoustic waves (SAW) and a polydimethylsiloxane (PDMS) microfluidic channel. The SAW interacted with the sample fluid inside the microchannel and deflected particles from their original streamlines to achieve separation. Streptavidin-functionalized polystyrene (PS) microparticles were used to capture aptamer (single-stranded DNA) labeled at one end with a biotin molecule. The free end of the customized aptamer15 (apt15), which was attached to the microparticles via streptavidin-biotin linkage to form the PS-apt15 conjugate, was used to capture the model target protein, thrombin (th), by binding at exosite I to form the PS-apt15-th complex. We demonstrated that the PS-apt15 conjugate selectively captured thrombin molecules in a complex fluid. After the PS-apt15-th complex was formed, the sample fluid was pumped through a PDMS microchannel along with two buffer sheath flows that hydrodynamically focused the sample flow prior to SAW exposure for PS-apt15-th separation from the non-target proteins. We successfully separated thrombin from mCardinal2 and human serum using the proposed acoustofluidic device.

Autosomal dominant transmission of complicated hereditary spastic paraplegia due to a dominant negative mutation of KIF1A, SPG30 gene.

KIF1A is a brain-specific anterograde motor protein that transports cargoes towards the plus-ends of microtubules. Many variants of the KIF1A gene have been associated with neurodegenerative diseases and developmental delay. Homozygous mutations of KIF1A have been identified in a recessive subtype of hereditary spastic paraplegia (HSP), SPG30. In addition, KIF1A mutations have been found in pure HSP with autosomal dominant inheritance. Here we report the first case of familial complicated HSP with a KIF1A mutation transmitted in autosomal dominant inheritance. A heterozygous p.T258M mutation in KIF1A was found in a Korean family through targeted exome sequencing. They displayed phenotypes of mild intellectual disability with language delay, epilepsy, optic nerve atrophy, thinning of corpus callosum, periventricular white matter lesion, and microcephaly. A structural modeling revealed that the p.T258M mutation disrupted the binding of KIF1A motor domain to microtubules and its movement along microtubules. Assays of peripheral accumulation and proximal distribution of KIF1A motor indicated that the KIF1A motor domain with p.T258M mutation has reduced motor activity and exerts a dominant negative effect on wild-type KIF1A. These results suggest that the p.T258M mutation suppresses KIF1A motor activity and induces complicated HSP accompanying intellectual disability transmitted in autosomal dominant inheritance.

Crystal structure of the cyan fluorescent protein Cerulean-S175G.

Enhanced cyan fluorescent protein (ECFP) was derived from Aequorea victoria green fluorescent protein (avGFP), notably with S65T/Y66W mutations. Its chromophore consists of a tripeptide comprised of Thr65, Trp66 and Gly67 (TWG) residues, while that of avGFP consists of a Ser65, Tyr66 and Gly67 (SYG) tripeptide. Cerulean and SCFP3A were derived from ECFP-S72A/H148D (a double mutation) with additional Y145A and S175G mutations, respectively, while Cerulean-S175G has both mutations (Y145A and S175G). The crystal structures of these ECFP variants at neutral pH were reported to adopt two distinct major conformations called ECFP and Cerulean. In this study, Cerulean-S175G was revealed to adopt only the Cerulean conformation, while Cerulean has been reported to adopt both the ECFP and the Cerulean conformations in its crystal structures. Sharing the same S175G mutation with SCFP3A, Cerulean-S175G showed a slightly increased quantum yield, like SCFP3A, but did not adopt the ECFP conformation adopted by SCFP3A. Detailed comparison of Cerulean-S175G and other ECFP variants revealed that the notable conformational changes in ECFP variants can be understood mainly in terms of the interaction between the Trp66 residue of the chromophore and residues 145-148 of ß-strand 7.

Structural and biochemical characterization of the cytosolic wheat cyclophilin TaCypA-1.

Cyclophilins belong to a family of proteins that bind to the immunosuppressive drug cyclosporin A (CsA). Several members of this protein family catalyze the cis-trans isomerization of peptide bonds preceding prolyl residues. The present study describes the biochemical and structural characteristics of a cytosolic cyclophilin (TaCypA-1) cloned from wheat (Triticum aestivum L.). Purified TaCypA-1 expressed in Escherichia coli showed peptidyl-prolyl cis-trans isomerase activity, which was inhibited by CsA with an inhibition constant of 78.3 nM. The specific activity and catalytic efficiency (kcat/Km) of the purified TaCypA-1 were 99.06 ± 0.13 nmol s(-1) mg(-1) and 2.32 × 10(5) M(-1) s(-1), respectively. The structures of apo TaCypA-1 and the TaCypA-1-CsA complex were determined at 1.25 and 1.20 Šresolution, respectively, using X-ray diffraction. Binding of CsA to the active site of TaCypA-1 did not result in any significant conformational change in the apo TaCypA-1 structure. This is consistent with the crystal structure of the human cyclophilin D-CsA complex reported at 0.96 Å resolution. The TaCypA-1 structure revealed the presence of a divergent loop of seven amino acids (48)KSGKPLH(54) which is a characteristic feature of plant cyclophilins. This study is the first to elucidate the structure of an enzymatically active plant cyclophilin which shows peptidyl-prolyl cis-trans isomerase activity and the presence of a divergent loop.

Structure-based virtual screening approach to the discovery of novel PTPMT1 phosphatase inhibitors.

Dual-specificity protein tyrosine phosphatase localized to mitochondrion 1 (PTPMT1) has recently proved to be a promising therapeutic target for the treatment of type II diabetes. Herein we report the first example for a successful application of the structure-based virtual screening to identify the novel inhibitors of human PTPMT1. These inhibitors were computationally screened for having desirable physicochemical properties as a drug candidate and reveal a high potency with IC(50) values ranging from 0.7 to 17.3µM. Therefore, they deserve consideration for further development by structure-activity relationship studies to optimize the antidiabetic activities. Structural features relevant to the stabilization of the newly identified inhibitors in the active site of PTPMT1 are addressed in detail.

Exploring binding sites other than the catalytic core in the crystal structure of the catalytic domain of MKP-4.

Map kinase phosphatase 4 (MKP-4), which has been implicated in signalling pathways that negatively regulate glucose uptake, belongs to the dual-specificity phosphatase (DUSP) family. An inherent property of MKPs is an ability to undergo structural rearrangement, transitioning from a partially active to a fully active conformation. Here, a 2.7 Šresolution crystal structure of the catalytic domain of MKP-4 (MKP-4C) is presented. It was determined that the MKP-4C structure seriously deviates from canonical conformations of DUSPs and this characteristic feature results in significant gaps between the catalytic core and several surrounding loops which are unique compared with other MKP counterparts that adopt an active conformation. Using virtual library screening, it was found that inhibitors bind to MKP-4C with high affinity near these gaps. Inhibitors that target other binding sites instead of the active site can be utilized to prevent transition to a fully active conformation. Compounds that are able to make contacts with these sites in MKP-4 would not only provide a beneficial increase in affinity but may also permit greater specificity relative to other protein tyrosine phosphatases.

Proteomic analysis of oxidative stress-induced neuronal cell death by using two-dimensional fluorescence difference gel electrophoresis.

Oxidative stress has been implicated in a number of neurological disorders, including cerebral ischemia and neuro-degenerative diseases. Comprehensive proteomic studies were carried out using an immortalized mouse hippocampal cell line, HT22, exhibiting oxidative stress-mediated cell death upon glutamate treatment. Two-dimensional fluorescence difference gel electrophoresis (2D DIGE) of subcellular organelle fractions revealed that significant numbers of proteins showed quantitative changes during HT22 cell death, among which a total of 51 proteins were identified by mass spectrometry. The identified proteins indicate that HT22 cell death occurs through perturbations in mitochondrial function, changes in translational elongation machinery, and translocation of proteins across subcellular organelles. This list of proteins may shed light on oxidative stress-mediated neuronal cell death.

Discovery of novel Cdc25 phosphatase inhibitors with micromolar activity based on the structure-based virtual screening.

Cdc25 phosphatases have been considered as attractive drug targets for anticancer therapy because of the correlation of their overexpression with a wide variety of cancers. We have been able to identify five novel Cdc25 phosphatase inhibitors with micromolar activity by means of a computer-aided drug design protocol involving the homology modeling of Cdc25A and the virtual screening with the automated AutoDock program implementing the effects of ligand solvation in the scoring function. Because the newly discovered inhibitors are structurally diverse and reveal a significant potency with IC 50 values lower than 10 microM, they can be considered for further development by structure-activity relationship studies or de novo design methods. The differences in binding modes of the identified inhibitors in the active sites of Cdc25A and B are discussed in detail.

Identification of proteins binding to decursinol by chemical proteomics.

Decursinol, found in the roots of Angelica gigas Nakai, has been traditionally used to treat anemia and other various diseases. Recently, numerous biological activities such as cytotoxic effect on leukemia cells, and antitumor, neuroprotection, and antibacterial activities have been reported for this compound. Although a number of proteins including protein kinase C, androgen receptor, and acetylcholinesterase were proposed as molecular targets responsible for the activities of decursinol, they are not enough to explain such a diverse biological activity mentioned above. In this study, we employed a chemical proteomic approach, leading to identification of seven proteins as potential proteins interacting with decursinol. Most of the proteins contain a defined ATP or nucleic acid binding domain and have been implied to be involved in the pathogenesis and progression of various human diseases including cancer, autoimmune disorders, or neurodegenerative diseases. The present results may provide clues to understand the molecular mechanism of the biological activities shown by decursinol, an anticancer natural product.

Phosphoproteomic analysis of AML14.3D10 cell line as a model system of eosinophilia.

Eosinophils act as effectors in the inflammatory reactions of allergic diseases including atopic dermatitis. Atopic dermatitis patients and others with allergic disorders suffer from eosinophilia, an accumulation of eosinophils due to increased survival or decreased apoptosis of eosinophils. In this study, a differential phosphoproteome analysis of AML14.3D10 eosinophil cell line after treatment with IL-5 or dexamethasone was conducted in an effort to identify the phosphoproteins involved in the proliferation or apoptosis of eosinophils. Proteins were separated by 2-DE and alterations in phosphoproteins were then detected by Pro-Q Diamond staining. The significant quantitative changes were shown in nineteen phosphoproteins including retinoblastoma binding protein 7, MTHSP75, and lymphocyte cytosolic protein 1. In addition, seven phosphoproteins including galactokinase I, and proapolipoprotein, were appeared after treatment with IL-5 or dexamethasone. Especially, the phospho-APOE protein was down-regulated in IL-5 treated AML14.3D10, while the more heavily phosphorylated APOE form was induced after dexamethasone treatment. These phosphoproteome data for the AML14.3D10 cell line may provide clues to understand the mechanism of eosinophilia as well as allergic disorders including atopic dermatitis.