Synthesis: Molecular Structure, Thermal-Calorimetric and Computational Analyses, of Three New Amine Borane Adducts.

Cyclopropylamine borane C3H5NH2BH3 (C3AB), 2-ethyl-1-hexylamine borane CH3(CH2)3CH(C2H5)CH2NH2BH3 (C2C6AB) and didodecylamine borane (C12H25)2NHBH3 ((C12)2AB) are three new amine borane adducts (ABAs). They are synthesized by reaction of the corresponding amines with a borane complex, the reaction being exothermic as shown by Calvet calorimetry. The successful synthesis of each has been demonstrated by FTIR, Raman and NMR. For instance, the 11B NMR spectra show the presence of signals typical of the NBH3 environment, thereby implying the formation of B-N bonds. The occurrence of dihydrogen bonds (DHBs) for each of the ABAs has been highlighted by DSC and FTIR, and supported by DFT calculations (via the Mulliken charges for example). When heated, the three ABAs behave differently: C3AB and C2C6AB decompose from 68 to 100 °C whereas (C12)2AB is relatively stable up to 173 °C. That means that these ABAs are not appropriate as hydrogen carriers, but the 'most' stable (C12)2AB could open perspectives for the synthesis of advanced materials.

Structural Insight of MOFs under Combined Mechanical and Adsorption Stimuli.

External control over the pore size of flexible metal-organic frameworks (MOFs) has recently emerged as an intriguing concept, with possible applications to gas storage and separation. In this work we present a new pressure cell capable for the first time of monitoring through in situ X-ray powder diffraction an adsorbent powder under combined uniaxial applied mechanical stress (up to 1 GPa) and gas pressure (up to 20 bar). The combined stress-pressure clamp (CSPC) cell was successfully exploited to follow the evolution of the CO2 breathing behaviour of the prototypical complex breathing MIL-53(Al) system under mechanical compression obtaining structural evidence that this MOF can be maintained in its closed pore state upon compression, precluding its re-opening at high gas pressure (>7 bar). This novel setup shows potential for the in-operando exploration of flexible systems, in equilibrium and flow configurations.

Synthesis, Characterization, and Encapsulation Properties of Rigid and Flexible Porphyrin Cages Assembled from N-Heterocyclic Carbene-Metal Bonds.

Four porphyrins equipped with imidazolium rings on the para positions of their meso aryl groups were prepared and used as tetrakis(N-heterocyclic carbene) (NHC) precursors for the synthesis of porphyrin cages assembled from eight NHC-M bonds (M = Ag+ or Au+). The conformation of the obtained porphyrin cages in solution and their encapsulation properties strongly depend on the structure of the spacer -(CH2)n- (n = 0 or 1) between meso aryl groups and peripheral NHC ligands. In the absence of methylene groups (n = 0), porphyrin cages are rather rigid and the short porphyrin-porphyrin distance prevents the encapsulation of guest molecules like 1,4-diazabicyclo[2.2.2]octane (DABCO). By contrast, the presence of methylene functions (n = 1) between meso aryl groups and peripheral NHCs offers additional flexibility to the system, allowing the inner space between the two porphyrins to expand enough to encapsulate guest molecules like water molecules or DABCO. The peripheral NHC-wingtip groups also play a significant role in the encapsulation properties of the porphyrin cages.

Crystals springing into action: metal-organic framework CUK-1 as a pressure-driven molecular spring.

Mercury porosimetry and in situ high pressure single crystal X-ray diffraction revealed the wine-rack CUK-1 MOF as a unique crystalline material capable of a fully reversible mechanical pressure-triggered structural contraction. The near-absence of hysteresis upon cycling exhibited by this robust MOF, akin to an ideal molecular spring, is associated with a constant work energy storage capacity of 40 J g-1. Molecular simulations were further deployed to uncover the free-energy landscape behind this unprecedented pressure-responsive phenomenon in the area of compliant hybrid porous materials. This discovery is of utmost importance from the perspective of instant energy storage and delivery.

Influence of Thermal and Mechanical Stimuli on the Behavior of Al-CAU-13 Metal-Organic Framework.

The response of the metal-organic framework aluminum-1,4-cyclohexanedicarboxylate or Al-CAU-13 (CAU: Christian Albrecht University) to the application of thermal and mechanical stimuli was investigated using synchrotron powder X-ray diffraction (SPXRD). Variable temperature in situ SPXRD data, over the range 80-500 K, revealed a complex evolution of the structure of the water guest containing Al-CAU-13H2O, the dehydration process from ca. 310 to 370 K, and also the evolution of the guest free Al-CAU-13 structure between ca. 370 and 500 K. Rietveld refinement allowed this complexity to be rationalized in the different regions of heating. The Berman thermal Equation of State was determined for the two structures (Al-CAU-13H2O and Al-CAU-13). Diamond anvil cell studies at elevated pressure (from ambient to up to ca. 11 GPa) revealed similarities in the structural responses on application of pressure and temperature. The ability of the pressure medium to penetrate the framework was also found to be important: non-penetrating silicone oil caused pressure induced amorphization, whereas penetrating helium showed no plastic deformation of the structure. Third-order Vinet equations of state were calculated and show Al-CAU-13H2O is a hard compound for a metal-organic framework material. The mechanical response of Al-CAU-13, with tetramethylpyrazine guests replacing water, was also investigated. Although the connectivity of the structure is the same, all the linkers have a linear e,e-conformation and the structure adopts a more open, wine-rack-like arrangement, which demonstrates negative linear compressibility (NLC) similar to Al-MIL-53 and a significantly softer mechanical response. The origin of this variation in behavior is attributed to the different linker conformation, demonstrating the influence of the S-shaped a,a-conformation on the response of the framework to external stimuli.

Charting the Metal-Dependent High-Pressure Stability of Bimetallic UiO-66 Materials.

In theory, bimetallic UiO-66(Zr:Ce) and UiO-66(Zr:Hf) metal-organic frameworks (MOFs) are extremely versatile and attractive nanoporous materials as they combine the high catalytic activity of UiO-66(Ce) or UiO-66(Hf) with the outstanding stability of UiO-66(Zr). Using in situ high-pressure powder X-ray diffraction, however, we observe that this expected mechanical stability is not achieved when incorporating cerium or hafnium in UiO-66(Zr). This observation is akin to the earlier observed reduced thermal stability of UiO-66(Zr:Ce) compounds. To elucidate the atomic origin of this phenomenon, we chart the loss-of-crystallinity pressures of 22 monometallic and bimetallic UiO-66 materials and systematically isolate their intrinsic mechanical stability from their defect-induced weakening. This complementary experimental/computational approach reveals that the intrinsic mechanical stability of these bimetallic MOFs decreases nonlinearly upon cerium incorporation but remains unaffected by the zirconium: hafnium ratio. Additionally, all experimental samples suffer from defect-induced weakening, a synthesis-controlled effect that is observed to be independent of their intrinsic stability.

Solvent Impact on the Properties of Benchmark Metal-Organic Frameworks: Acetonitrile-Based Synthesis of CAU-10, Ce-UiO-66, and Al-MIL-53.

Herein is reported the utilization of acetonitrile as a new solvent for the synthesis of the three significantly different benchmark metal-organic frameworks (MOFs) CAU-10, Ce-UiO-66, and Al-MIL-53 of idealized composition [Al(OH)(ISO)], [Ce6 O4 (OH)4 (BDC)6 ], and [Al(OH)(BDC)], respectively (ISO2- : isophthalate, BDC2- : terephthalate). Its use allowed the synthesis of Ce-UiO-66 on a gram scale. While CAU-10 and Ce-UiO-66 exhibit properties similar to those reported elsewhere for these two materials, the obtained Al-MIL-53 shows no structural flexibility upon adsorption of hydrophilic or hydrophobic guest molecules such as water and xenon and is stabilized in its large-pore form over a broad temperature range (130-450 K). The stabilization of the large-pore form of Al-MIL-53 was attributed to a high percentage of noncoordinating -COOH groups as determined by solid-state NMR spectroscopy. The defective material shows an unusually high water uptake of 310 mg g-1 within the range of 0.45 to 0.65 p/p°. In spite of showing no breathing effect upon water adsorption it exhibits distinct mechanical properties. Thus, mercury intrusion porosimetry studies revealed that the solid can be reversibly forced to breathe by applying moderate pressures (≈60 MPa).

Engineering micromechanics of soft porous crystals for negative gas adsorption.

Framework materials at the molecular level, such as metal-organic frameworks (MOF), were recently found to exhibit exotic and counterintuitive micromechanical properties. Stimulated by host-guest interactions, these so-called soft porous crystals can display counterintuitive adsorption phenomena such as negative gas adsorption (NGA). NGA materials are bistable frameworks where the occurrence of a metastable overloaded state leads to pressure amplification upon a sudden framework contraction. How can we control activation barriers and energetics via functionalization of the molecular building blocks that dictate the frameworks' mechanical response? In this work we tune the elastic and inelastic properties of building blocks at the molecular level and analyze the mechanical response of the resulting frameworks. From a set of 11 frameworks, we demonstrate that widening of the backbone increases stiffness, while elongation of the building blocks results in a decrease in critical yield stress of buckling. We further functionalize the backbone by incorporation of sp3 hybridized carbon atoms to soften the molecular building blocks, or stiffen them with sp2 and sp carbons. Computational modeling shows how these modifications of the building blocks tune the activation barriers within the energy landscape of the guest-free bistable frameworks. Only frameworks with free energy barriers in the range of 800 to 1100 kJ mol-1 per unit cell, and moderate yield stress of 0.6 to 1.2 nN for single ligand buckling, exhibit adsorption-induced contraction and negative gas adsorption. Advanced experimental in situ methodologies give detailed insights into the structural transitions and the adsorption behavior. The new framework DUT-160 shows the highest magnitude of NGA ever observed for nitrogen adsorption at 77 K. Our computational and experimental analysis of the energetics and mechanical response functions of porous frameworks is an important step towards tuning activation barriers in dynamic framework materials and provides critical design principles for molecular building blocks leading to pressure amplifying materials.

Towards general network architecture design criteria for negative gas adsorption transitions in ultraporous frameworks.

Switchable metal-organic frameworks (MOFs) have been proposed for various energy-related storage and separation applications, but the mechanistic understanding of adsorption-induced switching transitions is still at an early stage. Here we report critical design criteria for negative gas adsorption (NGA), a counterintuitive feature of pressure amplifying materials, hitherto uniquely observed in a highly porous framework compound (DUT-49). These criteria are derived by analysing the physical effects of micromechanics, pore size, interpenetration, adsorption enthalpies, and the pore filling mechanism using advanced in situ X-ray and neutron diffraction, NMR spectroscopy, and calorimetric techniques parallelised to adsorption for a series of six isoreticular networks. Aided by computational modelling, we identify DUT-50 as a new pressure amplifying material featuring distinct NGA transitions upon methane and argon adsorption. In situ neutron diffraction analysis of the methane (CD4) adsorption sites at 111 K supported by grand canonical Monte Carlo simulations reveals a sudden population of the largest mesopore to be the critical filling step initiating structural contraction and NGA. In contrast, interpenetration leads to framework stiffening and specific pore volume reduction, both factors effectively suppressing NGA transitions.

Guest-Assisted Proton Conduction in the Sulfonic Mesoporous MIL-101 MOF.

Post-synthesis modification of MIL-101(Cr)-NO2 was explored in order to decorate the organic backbone by propyl-sulfonic groups, with the aim to incorporate mobile and acidic protons for solid-state proton electrolyte applications. The resulting solid switched from insulating towards proton superconductive behavior under humidity, while the conductivity recorded at 363 K and 95 % relative humidity reached 4.8×10-3  S cm-1 . Propitiously, the impregnation of the material by strong acidic molecules (H2 SO4 ) further boosted the proton conductivity performances up to the remarkable σ value of 1.3×10-1  S cm-1 at 363 K/95 % RH, which reaches the performances of the best proton conductive MOF reported so far.

Modulation of the mechanical energy storage performance of the MIL-47(VIV) metal organic framework by ligand functionalization.

The functionalization of the metal-organic framework MIL-47(VIV) with ligands bearing bulky functional groups (-Br or -CF3) has been envisaged as a possible route to enhance the mechanical energy storage performances of this family of hybrid porous materials. This exploratory work was carried out by coupling advanced experimental techniques (mercury intrusion and X-ray powder diffraction) supported by density functional theory calculations. MIL-47(VIV)-BDC-CF3 was demonstrated to be one of the most promising porous materials for mechanical energy-related applications with performance in terms of work energy which surpasses that of any porous solids reported so far.

A robust monolithic metal-organic framework with hierarchical porosity.

Hierarchical porous UiO-66-NH2 cm-monolithic xero- and aero-gels with a controlled shape and mechanical robustness were successfully produced from ethanolic gels. Their remarkable controlled hierarchical porosity was effectively assessed using N2 sorption, Hg intrusion porosimetry and focused ion beam-scanning electron microscopy methods.

Unraveling the mechanical behaviour of hydrazine borane (NH2-NH2-BH3).

Crystalline B-N-H compounds of low molecular weight have been intensively investigated over the past two decades owing to their promises for chemical hydrogen storage. Hydrazine borane NH2-NH2-BH3 is one of the most recent examples of this family of materials. In the present work, we explored its structural behaviour under mechanical stimulus by synchrotron high pressure X-ray diffraction. It has been evidenced that hydrazine borane shows a gradual pressure-induced decrease of its unit cell dimension and the process is reversible when the applied pressure is released. The compressibility of this material was established to be relatively low (high bulk modulus) and highly anisotropic. As revealed by molecular simulations based on Density Functional Theory calculations, the mechanical behaviour of NH2-NH2-BH3 was correlated to the pressure-induced changes of its crystal structure in terms of intra- and intermolecular bond lengths and angles parameters.

Chemical vapor deposition growth of boron-carbon-nitrogen layers from methylamine borane thermolysis products.

This work investigates the growth of B-C-N layers by chemical vapor deposition using methylamine borane (MeAB) as the single-source precursor. MeAB has been synthesized and characterized, paying particular attention to the analysis of its thermolysis products, which are the gaseous precursors for B-C-N growth. Samples have been grown on Cu foils and transferred onto different substrates for their morphological, structural, chemical, electronic and optical characterizations. The results of these characterizations indicate a segregation of h-BN and graphene-like (Gr) domains. However, there is an important presence of B and N interactions with C at the Gr borders, and of C interacting at the h-BN-edges, respectively, in the obtained nano-layers. In particular, there is a significant presence of C-N bonds, at Gr/h-BN borders and in the form of N doping of Gr domains. The overall B:C:N contents in the layers is close to 1:3:1.5. A careful analysis of the optical bandgap determination of the obtained B-C-N layers is presented, discussed and compared with previous seminal works with samples of similar composition.

Adsorption Contraction Mechanics: Understanding Breathing Energetics in Isoreticular Metal-Organic Frameworks.

A highly porous metal-organic framework DUT-48, isoreticular to DUT-49, is reported with a high surface area of 4560 m2·g-1 and methane storage capacity up to 0.27 g·g-1 (164 cm3·cm-3) at 6.5 MPa and 298 K. The flexibility of DUT-48 and DUT-49 under external and internal (adsorption-induced) pressure is analyzed and rationalized using a combination of advanced experimental and computational techniques. While both networks undergo a contraction by mechanical pressure, only DUT-49 shows adsorption-induced structural transitions and negative gas adsorption of n-butane and nitrogen. This adsorption behavior was analyzed by microcalorimetry measurements and molecular simulations to provide an explanation for the lack of adsorption-induced breathing in DUT-48. It was revealed that for DUT-48, a significantly lower adsorption enthalpy difference and a higher framework stiffness prevent adsorption-induced structural transitions and negative gas adsorption. The mechanical behavior of both DUT-48 and DUT-49 was further analyzed by mercury porosimetry experiments and molecular simulations. Both materials exhibit large volume changes under hydrostatic compression, demonstrating noteworthy potential as shock absorbers with unprecedented high work energies.

Lithium Hydrazinidoborane Ammoniate LiN2H3BH3·0.25NH3, a Derivative of Hydrazine Borane.

Boron- and nitrogen-based materials have shown to be attractive for solid-state chemical hydrogen storage owing to gravimetric hydrogen densities higher than 10 wt% H. Herein, we report a new derivative of hydrazine borane N2H4BH3, namely lithium hydrazinidoborane ammoniate LiN2H3BH3·0.25NH3. It is easily obtained in ambient conditions by ball-milling N2H4BH3 and lithium amide LiNH2 taken in equimolar amounts. Both compounds react without loss of any H atoms. The molecular and crystallographic structures of our new compound have been confirmed by NMR/FTIR spectroscopy and powder X-ray diffraction. The complexation of the entity LiN2H3BH3 by some NH3 has been also established by thermogravimetric and calorimetric analyses. In our conditions, LiN2H3BH3·0.25NH3 has been shown to be able to release H2 at temperatures lower than the parent N2H4BH3 or the counterpart LiN2H3BH3. It also liberates non-negligible amounts of NH3 at temperatures lower than 100 °C. This is actually quite detrimental for chemical H storage, but alternatively LiN2H3BH3·0.25NH3 might be seen as a potential NH3 carrier.

Exploration of the mechanical behavior of metal organic frameworks UiO-66(Zr) and MIL-125(Ti) and their NH2 functionalized versions.

The structural behaviour under mechanical stimuli of two metal organic frameworks, UiO-66(Zr) and MIL-125(Ti) and their amino-functionalized derivatives has been investigated by high-pressure powder X-ray diffraction up to 3.5 GPa. All these solids showed a gradual pressure-induced reversible decrease of their crystallinity and UiO-66(Zr)_NH2 material has been revealed as one of the most resilient MOFs reported so far corresponding to a very high bulk modulus. The mechanical behaviors of these MOFs have been correlated to their chemical and geometric features including the metal-oxygen coordination number, the nature of the organic linker, the porosity as well as their crystal density.

Mechanical energy storage performance of an aluminum fumarate metal-organic framework.

The aluminum fumarate MOF A520 or MIL-53-FA is revealed to be a promising material for mechanical energy-related applications with performances in terms of work and heat energies which surpass those of any porous solids reported so far. Complementary experimental and computational tools are deployed to finely characterize and understand the pressure-induced structural transition at the origin of these unprecedented levels of performance.

Key study on the potential of hydrazine bisborane for solid- and liquid-state chemical hydrogen storage.

Hydrazine bisborane N2H4(BH3)2 (HBB; 16.8 wt %) recently re-emerged as a potential hydrogen storage material. However, such potential is controversial: HBB was seen as a hazardous compound up to 2010, but now it would be suitable for hydrogen storage. In this context, we focused on fundamentals of HBB because they are missing in the literature and should help to shed light on its effective potential while taking into consideration any risk. Experimental/computational methods were used to get a complete characterization data sheet, including, e.g., XRD, NMR, FTIR, Raman, TGA, and DSC. From the reported results and discussion, it is concluded that HBB has potential in the field of chemical hydrogen storage given that both thermolytic and hydrolytic dehydrogenations were analyzed. In solid-state chemical hydrogen storage, it cannot be used in the pristine state (risk of explosion during dehydrogenation) but can be used for the synthesis of derivatives with improved dehydrogenation properties. In liquid-state chemical hydrogen storage, it can be studied for room-temperature dehydrogenation, but this requires the development of an active and selective metal-based catalyst. HBB is a thus a candidate for chemical hydrogen storage.

Metal-organic frameworks as potential shock absorbers: the case of the highly flexible MIL-53(Al).

The mechanical energy absorption ability of the highly flexible MIL-53(Al) MOF material was explored using a combination of experiments and molecular simulations. A pressure-induced transition between the large pore and the closed pore forms of this solid was revealed to be irreversible and associated with a relatively large energy absorption capacity. Both features make MIL-53(Al) the first potential MOF candidate for further use as a shock absorber.