ABSTRACT
A new strategy is developed in which cadmium-doped zinc sulfide (CdZnS) is used as the outermost shell to synthesize red, green, and blue (RGB) quantum dots (QDs) with the core/shell structures of CdZnSe/ZnSe/ZnS/CdZnS, CdZnSe/ZnSe/ZnSeS/CdZnS, and CdZnSe/ZnSeS/ZnS/CdZnS, respectively. Firstly, the inner ZnS and ZnSe shells confine the excitons inside the cores of QDs and provide a better lattice matching with respect to the outermost shell, which ensures high photoluminescence quantum yields of QDs. Secondly, the CdZnS shell affords its QDs with shallow valence bands (VBs). Therefore, the CdZnS shell could be used as a springboard, which decreases the energy barrier for hole injection from polymers to QDs to be below 1.0 eV. It makes the holes to be easily injected into the QD EMLs and enables a balanced recombination of charge carriers in quantum dot light-emitting diodes (QLEDs). Thirdly, the RGB QLEDs made by these new QDs exhibit peak external quantum efficiencies (EQEs) of 20.2%, 19.2%, and 8.4%, respectively. In addition, the QLEDs exhibit unexpected luminance values at low applied voltages and therefore high power efficiencies. From these results, it is evident that CdZnS could act as an excellent shell and hole injection springboard to afford high performance QLEDs.
Subject(s)
Quantum Dots , Cadmium , Color , Light , Quantum Dots/chemistry , Sulfides , Zinc/chemistry , Zinc Compounds/chemistryABSTRACT
High performance and super stable all-inorganic full-color quantum dot light-emitting diodes (QLEDs) are constructed by adopting solution-processed Mg-doped NiOx (Mg-NiOx ) nanoparticles as hole transport layer (HTL) and Al-doped ZnO (AZO) as electron transport layer (ETL). Mg-NiOx nanoparticles possess the advantages of low-temperature solution processability, intrinsic stability, and controllable electronic properties. UV-ozone (UVO) treatment is applied to the Mg-NiOx film to modulate its surface composition. By carefully controlling the UVO treating time, favorable energy levels can be achieved to minimize the energy barrier for hole injection. At the cathode side, Al-doping can reduce the conductivity of ZnO ETL and decrease the interface charge transfer, effectively, thus leading to more balanced charge injection and consequent high luminance and efficiency. The maximum luminance and EQE can reach as high as 38 444 cd m-2 and 5.09% for R-QLEDs, 177 825 cd m-2 and 10.1% for G-QLEDs, and 3103 cd m-2 and 2.19% for B-QLEDs. The luminance values are the highest ever reported for all-inorganic QLEDs. Furthermore, the all-inorganic devices show much better resistance to water and oxygen existing in air. The results show that the ion-doped NiOx and AZO nanoparticles would facilitate the design and development of highly efficient and super stable QLEDs.
ABSTRACT
An ideal anti-counterfeiting technique has to be inexpensive, mass-producible, nondestructive, unclonable and convenient for authentication. Although many anti-counterfeiting technologies have been developed, very few of them fulfill all the above requirements. Here we report a non-destructive, inkjet-printable, artificial intelligence (AI)-decodable and unclonable security label. The stochastic pinning points at the three-phase contact line of the ink droplets is crucial for the successful inkjet printing of the unclonable security labels. Upon the solvent evaporation, the three-phase contact lines are pinned around the pinning points, where the quantum dots in the ink droplets deposited on, forming physically unclonable flower-like patterns. By utilizing the RGB emission quantum dots, full-color fluorescence security labels can be produced. A convenient and reliable AI-based authentication strategy is developed, allowing for the fast authentication of the covert, unclonable flower-like dot patterns with different sharpness, brightness, rotations, amplifications and the mixture of these parameters.
ABSTRACT
Nanocrystalline Lu2O3:Eu3+ was prepared by co-precipitation method using ammonium hydrogen carbonate and ammonium oxalic acid as precipitants, respectively. The crystal structure and morphology were analyzed by means of XRD and TEM. The resultant powders were sintered into transparent ceramics in vacuum and then in nitrogen without any additive. The surface morphology of the unpolished sintered specimens was characterized using SEM. The effect of different precipitants on microstructure of the nanopowders and transparency of the ceramics are compared. The excitation and emission spectra of Lu2O3:Eu3+ powders and ceramics were measured at room temperature by using synchrotron radiation as the light source. The fluorescence decay times of all specimens were analyzed. Luminescence of the ceramics decays faster than the corresponding nanopowders.
