Synthesis of sulfur-containing benzo[b]pyrrolo[2,1-c][1,4]oxazine-3,9-diones: blue light promoted radical cyclization process.

The selective and controllable construction of spio-tricyclic skeletons through visible light promoted radical cyclization still remains challenging. Herein, a general and convenient protocol for the blue light-promoted radical-mediated cascade spiro-cyclization/Michael addition of N-arylpropiolamides with thiophenols under metal-free conditions was developed. In this protocol, commercially available hydrochloric acid was employed as the cheap promoter and air as the sustainable oxidant. In addition, many functional groups tolerate the reaction conditions and produce a series of sulfur-containing benzo[b]pyrrolo[2,1-c][1,4]oxazine-3,9-diones.

Extraction of Corn Bract Cellulose by the Ammonia-Coordinated Bio-Enzymatic Method.

This study explored a green and efficient method for cellulose extraction from corn bract. The cellulose extraction by the CHB (CH3COOH/H2O2/Bio-enzyme) method and the N-CHB (NH3·H2O-CH3COOH/H2O2/Bio-enzyme) method were compared and analyzed. The effect of ammonia pretreatment on cellulose extraction by bio-enzymatic methods was discussed. The results showed that ammonia promoted the subsequent bio-enzymatic reaction and had a positive effect on the extraction of cellulose. Sample microstructure images (SEM) showed that the cellulose extracted by this method was in the form of fibrous bundles with smooth surfaces. The effect of different pretreatment times of ammonia on cellulose was further explored, and cellulose was characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD) and thermogravimetric (TG) analysis. The results showed that the N3h-CHB (NH3·H2O 50 °C 3 h, CH3COOH/H2O2 70 °C 11 h, Bio-enzyme 50 °C 4 h) method was the best way to extract cellulose in this study. FTIR showed that most of the lignin and hemicellulose were removed. XRD showed that all the cellulose extracted in this study was type I cellulose. TG analysis showed that the cellulose was significantly more thermally stable, with a maximum degradation temperature of 338.9 °C, close to that of microcrystalline cellulose (MCC). This study provides a reference for the utilization of corn bract and offers a new technical route for cellulose extraction.

Vapor-liquid-solid growth of large-area multilayer hexagonal boron nitride on dielectric substrates.

Multilayer hexagonal boron nitride (h-BN) is highly desirable as a dielectric substrate for the fabrication of two-dimensional (2D) electronic and optoelectronic devices. However, the controllable synthesis of multilayer h-BN in large areas is still limited in terms of crystallinity, thickness and stacking order. Here, we report a vapor-liquid-solid growth (VLSG) method to achieve uniform multilayer h-BN by using a molten Fe82B18 alloy and N2 as reactants. Liquid Fe82B18 not only supplies boron but also continuously dissociates nitrogen atoms from the N2 vapor to support direct h-BN growth on a sapphire substrate; therefore, the VLSG method delivers high-quality h-BN multilayers with a controllable thickness. Further investigation of the phase evolution of the Fe-B-N system reveals that isothermal segregation dominates the growth of the h-BN. The approach herein demonstrates the feasibility for large-area fabrication of van der Waals 2D materials and heterostructures.

Extrinsic Green Photoluminescence from the Edges of 2D Cesium Lead Halides.

Since the first report of the green emission of 2D all-inorganic CsPb2 Br5 , its bandgap and photoluminescence (PL) origin have generated intense debate and remained controversial. After the discovery that PL centers occupy only specific morphological structures in CsPb2 Br5 , a two-step highly sensitive and noninvasive optical technique is employed to resolve the controversy. Same-spot Raman-PL as a static property-structure probe reveals that CsPbBr3 nanocrystals are contributing to the green emission of CsPb2 Br5 ; pressure-dependent Raman-PL with a diamond anvil cell as a dynamic probe further rules out point defects such as Br vacancies as an alternative mechanism. Optical absorption under hydrostatic pressure shows that the bandgap of CsPb2 Br5 is 0.3-0.4 eV higher than previously reported values and remains nearly constant with pressure up to 2 GPa in good agreement with full-fledged density functional theory (DFT) calculations. Using ion exchange of Br with Cl and I, it is further proved that CsPbBr3- x Xx (X = Cl or I) is responsible for the strong visible PL in CsPb2 Br5- x Xx . This experimental approach is applicable to all PL-active materials to distinguish intrinsic defects from extrinsic nanocrystals, and the findings pave the way for new design and development of highly efficient optoelectronic devices based on all-inorganic lead halides.

Epitaxial Growth of 6 in. Single-Crystalline Graphene on a Cu/Ni (111) Film at 750 °C via Chemical Vapor Deposition.

The future electronic application of graphene highly relies on the production of large-area high-quality single-crystal graphene. However, the growth of single-crystal graphene on different substrates via either single nucleation or seamless stitching is carried out at a temperature of 1000 °C or higher. The usage of this high temperature generates a variety of problems, including complexity of operation, higher contamination, metal evaporation, and wrinkles owing to the mismatch of thermal expansion coefficients between the substrate and graphene. Here, a new approach for the fabrication of ultraflat single-crystal graphene using Cu/Ni (111)/sapphire wafers at lower temperature is reported. It is found that the temperature of epitaxial growth of graphene using Cu/Ni (111) can be reduced to 750 °C, much lower than that of earlier reports on catalytic surfaces. Devices made of graphene grown at 750 °C have a carrier mobility up to ≈9700 cm2 V-1 s-1 at room temperature. This work shines light on a way toward a much lower temperature growth of high-quality graphene in single crystallinity, which could benefit future electronic applications.

How Low Nucleation Density of Graphene on CuNi Alloy is Achieved.

CuNi alloy foils are demonstrated to be one of the best substrates for synthesizing large area single-crystalline graphene because a very fast growth rate and low nucleation density can be simultaneously achieved. The fast growth rate is understood to be due the abundance of carbon precursor supply, as a result of the high catalytic activity of Ni atoms. However, a theoretical understanding of the low nucleation density remains controversial because it is known that a high carbon precursor concentration on the surface normally leads to a high nucleation density. Here, the graphene nucleation on the CuNi alloy surfaces is systematically explored and it is revealed that: i) carbon atom dissolution into the CuNi alloy passivates the alloy surface, thereby drastically increasing the graphene nucleation barrier; ii) carbon atom diffusion on the CuNi alloy surface is greatly suppressed by the inhomogeneous atomic structure of the surface; and iii) a prominent increase in the rate of carbon diffusion into the bulk occurs when the Ni composition is higher than the percolation threshold. This study reveals the key mechanism for graphene nucleation on CuNi alloy surfaces and provides a guideline for the catalyst design for the synthesis of graphene and other 2D materials.

Edaravone injection reverses learning and memory deficits in a rat model of vascular dementia.

Edaravone is a novel free radical scavenger that exerts neuroprotective effects by inhibiting endothelial injury and by ameliorating neuronal damage in brain ischemia. Recently, it was reported that edaravone could alleviate the pathology and cognitive deficits of Alzheimer's disease patients. However, its relevance to vascular dementia (VaD) is not clear. In this study, we partially occluded the bilateral carotid arteries of rats surgically to induce chronic cerebral hypoperfusion (CCH), a well-known rat model of VaD. Water maze and step-down inhibitory test were used to evaluate the memory deficit. The activities of superoxide dismutase (SOD) and lactate dehydrogenase (LDH), the content of malondialdehyde (MDA) and total reactive oxygen species were measured to evaluate the oxidative stress level. Western blot analysis was used to evaluate the synaptic protein expression. It was found that treatment with edaravone for a 5-week period was able to reverse both spatial and fear-memory deficits in rats with CCH. Edaravone significantly reduced the level of oxidative stress in the brains of rats with CCH by increasing SOD activity and decreasing the content of MDA, LDH, and total reactive oxygen species. Furthermore, edaravone treatment also restored the levels of multiple synaptic proteins in the hippocampi of rats with CCH. Our data provide direct evidence supporting the neuroprotective effects of edaravone in VaD. We propose that the alleviation of oxidative stress and restoration of synaptic proteins play important roles in neuroprotection.

Minocycline ameliorates D-galactose-induced memory deficits and loss of Arc/Arg3.1 expression.

Dysfunction of learning and memory is widely found in many neurological diseases. Understanding how to preserve the normal function of learning and memory will be extremely beneficial for the treatment of these diseases. However, the possible protective effect of minocycline in memory impairment is unknown. We used the well-established D-galactose rat amnesia model and two behavioral tasks, the Morris water maze and the step-down task, for memory evaluation. Western blot and PCR were used to examine the protein and mRNA levels of Arc/Arg3.1. We report that minocycline supplementation ameliorates both the spatial and fear memory deficits caused by D-galactose. We also found that Arc/Arg3.1, c-fos, and brain-derived neurotrophic factor levels are decreased in the D-galactose animal model, and that minocycline reverses the protein and mRNA levels of Arc in the hippocampus, suggesting the potential role of Arc/Arg3.1 in minocycline's neuroprotective mechanism. Our study strongly suggests that minocycline can be used as a novel treatment for memory impairment in neurological diseases.

Fast growth of inch-sized single-crystalline graphene from a controlled single nucleus on Cu-Ni alloys.

Wafer-scale single-crystalline graphene monolayers are highly sought after as an ideal platform for electronic and other applications. At present, state-of-the-art growth methods based on chemical vapour deposition allow the synthesis of one-centimetre-sized single-crystalline graphene domains in ∼12 h, by suppressing nucleation events on the growth substrate. Here we demonstrate an efficient strategy for achieving large-area single-crystalline graphene by letting a single nucleus evolve into a monolayer at a fast rate. By locally feeding carbon precursors to a desired position of a substrate composed of an optimized Cu-Ni alloy, we synthesized an ∼1.5-inch-large graphene monolayer in 2.5 h. Localized feeding induces the formation of a single nucleus on the entire substrate, and the optimized alloy activates an isothermal segregation mechanism that greatly expedites the growth rate. This approach may also prove effective for the synthesis of wafer-scale single-crystalline monolayers of other two-dimensional materials.

Extreme Light Management in Mesoporous Wood Cellulose Paper for Optoelectronics.

Wood fibers possess natural unique hierarchical and mesoporous structures that enable a variety of new applications beyond their traditional use. We dramatically modulate the propagation of light through random network of wood fibers. A highly transparent and clear paper with transmittance >90% and haze <1.0% applicable for high-definition displays is achieved. By altering the morphology of the same wood fibers that form the paper, highly transparent and hazy paper targeted for other applications such as solar cell and antiglare coating with transmittance >90% and haze >90% is also achieved. A thorough investigation of the relation between the mesoporous structure and the optical properties in transparent paper was conducted, including full-spectrum optical simulations. We demonstrate commercially competitive multitouch touch screen with clear paper as a replacement for plastic substrates, which shows excellent process compatibility and comparable device performance for commercial applications. Transparent cellulose paper with tunable optical properties is an emerging photonic material that will realize a range of much improved flexible electronics, photonics, and optoelectronics.

Underlying Mechanisms of Memory Deficits Induced by Etomidate Anesthesia in Aged Rat Model: Critical Role of Immediate Early Genes.

BACKGROUND: Etomidate (R-1-[1-ethylphenyl] imidazole-5-ethyl ester) is a widely used anesthetic drug that had been reported to contribute to cognitive deficits after general surgery. However, its underlying mechanisms have not been fully elucidated. In this study, we aimed to explore the neurobiological mechanisms of cognitive impairments that caused by etomidate. METHODS: A total of 30 Sprague-Dawley rats were used and divided into two groups randomly to receive a single injection of etomidate or vehicle. Then, the rats' spatial memory ability and neuronal survival were evaluated using the Morris water maze test and Nissl staining, respectively. Furthermore, we analyzed levels of oxidative stress, as well as cyclic adenosine 3',5'-monophosphate response element-binding (CREB) protein phosphorylation and immediate early gene (IEG, including Arc, c-fos, and Egr1) expression levels using Western blot analysis. RESULTS: Compared with vehicle-treated rats, the etomidate-treated rats displayed impaired spatial learning (day 4: 27.26 ± 5.33 s vs. 35.52 ± 3.88 s, t = 2.988, P = 0.0068; day 5: 15.84 ± 4.02 s vs. 30.67 ± 4.23 s, t = 3.013, P = 0.0057; day 6: 9.47 ± 2.35 s vs. 25.66 ± 4.16 s, t = 3.567, P = 0.0036) and memory ability (crossing times: 4.40 ± 1.18 vs. 2.06 ± 0.80, t = 2.896, P = 0.0072; duration: 34.00 ± 4.24 s vs. 18.07 ± 4.79 s, t = 3.023, P = 0.0053; total swimming distance: 40.73 ± 3.45 cm vs. 27.40 ± 6.56 cm, t = 2.798, P = 0.0086) but no neuronal death. Furthermore, etomidate did not cause oxidative stress or deficits in CREB phosphorylation. The levels of multiple IEGs (Arc: vehicle treated rats 100%, etomidate treated rats 86%, t = 2.876, P = 0.0086; c-fos: Vehicle treated rats 100%, etomidate treated rats 72%, t = 2.996, P = 0.0076; Egr1: Vehicle treated rats 100%, etomidate treated rats 58%, t = 3.011, P = 0.0057) were significantly reduced in hippocampi of etomidate-treated rats. CONCLUSION: Our data suggested that etomidate might induce memory impairment in rats via inhibition of IEG expression.

Room-temperature NH3 gas sensors based on Ag-doped γ-Fe2O3/SiO2 composite films with sub-ppm detection ability.

In this report, NH3 gas sensors based on Ag-doped γ-Fe2O3/SiO2 composite films are investigated. The composite films were prepared with a sol-gel process, and the films' electrical resistance responded to the change of NH3 concentration in the environment. The SEM and AFM investigations showed that the films had a porous structure, and the XRD investigation indicated that the size of Ag particles changed with the modification of Ag loading content. Through a comparative gas sensing study among the Ag-doped composite films, undoped composite film, γ-Fe2O3 film, and SiO2 film, the Ag-doped composite films were found to be much more sensitive than the sensors based on the undoped composite film and γ-Fe2O3 film at room temperature, indicating the significant influences of the SiO2 and Ag on the sensing property. Moreover, the sensor based on Ag-doped (4%) γ-Fe2O3/SiO2 composite film was able to detect the NH3 gas at ppb level. Conversely, the responses of the sensor to other test gases (C2H5OH, CO, H2, CH4 and H2S) were all markedly low, suggesting excellent selectivity.

Non-canonical NF-κB Plays a Pivotal Role in Non-Hodgkin's Lymphoma.

This study tried to dissect BAFF/BAFF-R-mediated non-canonical NF-κB signaling in the drug resistance of B-cell non-Hodgkin's lymphoma. FQ-PCR was employ to determine the mRNA expression of BAFF, BAFF-R, Bcl-xL, and RIPK2 in the circulating blood of B-cell non-Hodgkin's lymphoma patients. Further correlation studies were performed with the gene expression in the circulating blood and tumor tissue. MTT assay as used to determine BAFF's role on lymphoma cell proliferation. Western blot was employed to determine protein expression after BAFF stimulation. The mRNA expression of BAFF, BAFF-R, Bcl-xL, and RIPK2 in the circulating blood of the resistant group was higher than that of the non-resistant group, which was statistically significant. The mRNA expression of the target genes was positively correlated. The mRNA expression was positively correlated with disease progression, which was statistically significant. The Bcl-xL mRNA expression in the resistant group was relatively higher than that in the non-resistant group, which was also statistically significant. However, the mRNA expression of other genes only showed increased tendency compared with non-resistant group. There was no significant change between target genes in different tumor tissues. With increased BAFF concentration and prolonged exposure, the proliferation of the tumor cells increased significantly, which was statistically significant. Western blot showed the expression of BAFF, BAFF-R, Bcl-xL, and RIPK2 all increased with increased BAFF concentration, which was also statistically significant. In B-cell, non-Hodgkin's lymphoma, BAFF may activate non-canonical NF-κB signaling to regulate drug resistance.

Broadband infrared photoluminescence in silicon nanowires with high density stacking faults.

Making silicon an efficient light-emitting material is an important goal of silicon photonics. Here we report the observation of broadband sub-bandgap photoluminescence in silicon nanowires with a high density of stacking faults. The photoluminescence becomes stronger and exhibits a blue shift under higher laser powers. The super-linear dependence on excitation intensity indicates a strong competition between radiative and defect-related non-radiative channels, and the spectral blue shift is ascribed to the band filling effect in the heterostructures of wurtzite silicon and cubic silicon created by stacking faults.

Highly sensitive room-temperature surface acoustic wave (SAW) ammonia sensors based on Co3O4/SiO2 composite films.

Surface acoustic wave (SAW) sensors based on Co3O4/SiO2 composite sensing films for ammonia detection were investigated at room temperature. The Co3O4/SiO2 composite films were deposited onto ST-cut quartz SAW resonators by a sol-gel method. SEM and AFM characterizations showed that the films had porous structures. The existence of SiO2 was found to enhance the ammonia sensing property of the sensor significantly. The sensor based on a Co3O4/SiO2 composite film, with 50% Co3O4 loading, which had the highest RMS value (3.72), showed the best sensing property. It exhibited a positive frequency shift of 3500 Hz to 1 ppm ammonia as well as excellent selectivity, stability and reproducibility at room temperature. Moreover, a 37% decrease in the conductance of the composite film as well as a positive frequency shift of 12,500 Hz were observed when the sensor was exposed to 20 ppm ammonia, indicating the positive frequency shift was derived from the decrease in film conductance.

Raman enhancement by graphene-Ga2O3 2D bilayer film.

2D ß-Ga2O3 flakes on a continuous 2D graphene film were prepared by a one-step chemical vapor deposition on liquid gallium surface. The composite was characterized by optical microscopy, scanning electron microscopy, Raman spectroscopy, energy dispersive spectroscopy, and X-ray photoelectron spectroscopy (XPS). The experimental results indicate that Ga2O3 flakes grew on the surface of graphene film during the cooling process. In particular, tenfold enhancement of graphene Raman scattering signal was detected on Ga2O3 flakes, and XPS indicates the C-O bonding between graphene and Ga2O3. The mechanism of Raman enhancement was discussed. The 2D Ga2O3-2D graphene structure may possess potential applications.

Efficient solar water-splitting using a nanocrystalline CoO photocatalyst.

The generation of hydrogen from water using sunlight could potentially form the basis of a clean and renewable source of energy. Various water-splitting methods have been investigated previously, but the use of photocatalysts to split water into stoichiometric amounts of H2 and O2 (overall water splitting) without the use of external bias or sacrificial reagents is of particular interest because of its simplicity and potential low cost of operation. However, despite progress in the past decade, semiconductor water-splitting photocatalysts (such as (Ga1-xZnx)(N1-xOx)) do not exhibit good activity beyond 440 nm (refs 1,2,9) and water-splitting devices that can harvest visible light typically have a low solar-to-hydrogen efficiency of around 0.1%. Here we show that cobalt(II) oxide (CoO) nanoparticles can carry out overall water splitting with a solar-to-hydrogen efficiency of around 5%. The photocatalysts were synthesized from non-active CoO micropowders using two distinct methods (femtosecond laser ablation and mechanical ball milling), and the CoO nanoparticles that result can decompose pure water under visible-light irradiation without any co-catalysts or sacrificial reagents. Using electrochemical impedance spectroscopy, we show that the high photocatalytic activity of the nanoparticles arises from a significant shift in the position of the band edge of the material.

Direct delamination of graphene for high-performance plastic electronics.

Electrochemical delamination is developed to transfer graphene for plastic electronics. The use of a sacrificial support during transfer is eliminated by depositing the target polyimide substrate directly onto graphene. A continuous and residue-free graphene surface with less line disruptions (such as ripples and wrinkles) is obtained on the target polyimide substrate, and good mechanical durability as well as low sheet resistance is obtained. The properties are competitive with conventional transparent conducting films.

Aqueous phase preparation of graphene with low defect density and adjustable layers.

Graphene sheets with an adjustable number of layers and a low defect density were prepared by exfoliation of microwave-assisted expanded graphite in the aqueous phase with the assistance of cetyltrimethylammonium bromide. The graphene sheets exhibit excellent film-formation ability, showing potential applications in optical and electrical device fields.

Nanowire thermometers.

We report the design and demonstration of nanowire temperature reporters. Metal alloys with tunable melting points were used to create nanowires in nanopores of anodic aluminum oxide using mechanical pressure injection. When exposed to temperature above their melting points, nanowires began to break up into disconnected shorter nanorods due to Rayleigh instability. A wide range of temperature can be probed conveniently by measuring electrical resistance of nanowires.