Vertically Oriented Quasi-2D Perovskite Grown In-Situ by Carbonyl Array-Synergized Crystallization for Direct X-Ray Detectors.

Quasi-2D perovskite quantum wells are increasingly recognized as promising candidates for direct-conversion X-ray detection. However, the fabrication of oriented and uniformly thick quasi-2D perovskite films, crucial for effective high-energy X-ray detection, is hindered by the inherent challenges of preferential crystallization at the gas-liquid interface, resulting in poor film quality. In addressing this limitation, a carbonyl array-synergized crystallization (CSC) strategy is employed for the fabrication of thick films of a quasi-2D Ruddlesden-Popper (RP) phase perovskite, specifically PEA2MA4Pb5I16. The CSC strategy involves incorporating two forms of carbonyls in the perovskite precursor, generating large and dense intermediates. This design reduces the nucleation rate at the gas-liquid interface, enhances the binding energies of Pb2+ at (202) and (111) planes, and passivates ion vacancy defects. Consequently, the construction of high-quality thick films of PEA2MA4Pb5I16 RP perovskite quantum wells is achieved and characterized by vertical orientation and a pure well-width distribution. The corresponding PEA2MA4Pb5I16 RP perovskite X-ray detectors exhibit multi-dimensional advantages in performance compared to previous approaches and commercially available a-Se detectors. This CSC strategy promotes 2D perovskites as a candidate for next-generation large-area flat-panel X-ray detection systems.

Multilevel Information Encryption Based on Thermochromic Perovskite Microcapsules via Orthogonal Photic and Thermal Stimuli Responses.

Increasing modal variations of stimulus-responsive materials ensure the high capacity and confidentiality of information storage and encryption systems that are crucial to information security. Herein, thermochromic perovskite microcapsules (TPMs) with dual-variable and quadruple-modal reversible properties are designed and prepared on the original oil-in-fluorine (O/F) emulsion system. The TPMs respond to the orthogonal variations of external UV and thermal stimuli in four reversible switchable modes and exhibit excellent thermal, air, and water stability due to the protection of perovskites by the core-shell structure. Benefiting from the high-density information storage TPMs, multiple information encryptions and decryptions are demonstrated. Moreover, a set of devices are assembled for a multilevel information encryption system. By taking advantage of TPMs as a "private key" for decryption, the signal can be identified as the corresponding binary ASCII code and converted to the real message. The results demonstrate a breakthrough in high-density information storage materials as well as a multilevel information encryption system based on switchable quadruple-modal TPMs.

Fabrication of Single-Crystal Violet Phosphorus Flakes For Ultrasensitive Photodetection.

Violet phosphorus (VP) has attracted a lot of attention for its unique physicochemical properties and emerging potential in photoelectronic applications. Although VP has a van der Waals (vdW) structure similar to that of other 2D semiconductors, direct synthesis of VP on a substrate is still challenging. Moreover, optoelectronic devices composed of transfer-free VP flakes have not been demonstrated. Herein, a bismuth-assisted vapor phase transport technique is designed to grow uniform single-crystal VP flakes on the SiO2 /Si substrate directly. The size of the crystalline VP flakes is an order of magnitude larger than that of previous liquid-exfoliated samples. The photodetector fabricated with the VP flakes shows a high responsivity of 12.5 A W-1 and response/recovery time of 3.82/3.03 ms upon exposure to 532 nm light. Furthermore, the photodetector shows a small dark current (<1 pA) that is beneficial to high-sensitivity photodetection. As a result, the detectivity is 1.38 × 1013 Jones that is comparable with that of the vdW p-n heterojunction detector. The results reveal the great potential of VP in optoelectronic devices as well as the CVT technique for the growth of single-crystal semiconductor thin films.

Platelet Concentrates Preconditioning of Mesenchymal Stem Cells and Combined Therapies: Integrating Regenerative Strategies for Enhanced Clinical Applications.

This article presents a comprehensive review of the factors influencing the efficacy of mesenchymal stem cells (MSCs) transplantation and its association with platelet concentrates (PCs). It focuses on investigating the impact of PCs' composition, the age and health status of platelet donors, application methods, and environmental factors on the outcomes of relevant treatments. In addition, it delves into the strategies and mechanisms for optimizing MSCs transplantation with PCs, encompassing preconditioning and combined therapies. Furthermore, it provides an in-depth exploration of the signaling pathways and proteomic characteristics associated with preconditioning and emphasizes the efficacy and specific effects of combined therapy. The article also introduces the latest advancements in the application of biomaterials for optimizing regenerative medical strategies, stimulating scholarly discourse on this subject. Through this comprehensive review, the primary goal is to facilitate a more profound comprehension of the factors influencing treatment outcomes, as well as the strategies and mechanisms for optimizing MSCs transplantation and the application of biomaterials in regenerative medicine, offering theoretical guidance and practical references for related research and clinical practice.

Dynamic X-ray imaging with screen-printed perovskite CMOS array.

High performance X-ray detector with ultra-high spatial and temporal resolution are crucial for biomedical imaging. This study reports a dynamic direct-conversion CMOS X-ray detector assembled with screen-printed CsPbBr3, whose mobility-lifetime product is 5.2 × 10-4 cm2 V-1 and X-ray sensitivity is 1.6 × 104 µC Gyair-1 cm-2. Samples larger than 5 cm[Formula: see text]10 cm can be rapidly imaged by scanning this detector at a speed of 300 frames per second along the vertical and horizontal directions. In comparison to traditional indirect-conversion CMOS X-ray detector, this perovskite CMOS detector offers high spatial resolution (5.0 lp mm-1) X-ray radiographic imaging capability at low radiation dose (260 nGy). Moreover, 3D tomographic images of a biological specimen are also successfully reconstructed. These results highlight the perovskite CMOS detector's potential in high-resolution, large-area, low-dose dynamic biomedical X-ray and CT imaging, as well as in non-destructive X-ray testing and security scanning.

Data-Driven Controlled Synthesis of Oriented Quasi-Spherical CsPbBr3 Perovskite Materials.

Controlled synthesis of lead-halide perovskite crystals is challenging yet attractive because of the pivotal role played by the crystal structure and growth conditions in regulating their properties. This study introduces data-driven strategies for the controlled synthesis of oriented quasi-spherical CsPbBr3, alongside an investigation into the synthesis mechanism. High-throughput rapid characterization of absorption spectra and color under ultraviolet illumination was conducted using 23 possible ligands for the synthesis of CsPbBr3 crystals. The links between the absorption spectra slope (difference in the absorbance at 400 nm and 450 nm divided by a wavelength interval of 50 nm) and crystal size were determined through statistical analysis of more than 100 related publications. Big data analysis and machine learning were employed to investigate a total of 688 absorption spectra and 652 color values, revealing correlations between synthesis parameters and properties. Ex situ characterization confirmed successful synthesis of oriented quasi-spherical CsPbBr3 perovskites using polyvinylpyrrolidone and Acacia. Density functional theory calculations highlighted strong adsorption of Acacia on the (110) facet of CsPbBr3. Optical properties of the oriented quasi-spherical perovskites prepared with these data-driven strategies were significantly improved. This study demonstrates that data-driven controlled synthesis facilitates morphology-controlled perovskites with excellent optical properties.

Human amniotic mesenchymal stromal cell-derived exosomes promote neuronal function by inhibiting excessive apoptosis in a hypoxia/ischemia-induced cerebral palsy model: A preclinical study.

BACKGROUND: Cerebral palsy (CP) is a condition resulting from perinatal brain injury and can lead to physical disabilities. Exosomes derived from human amniotic mesenchymal stromal cells (hAMSC-Exos) hold promise as potential therapeutic options. OBJECTIVE: This study aimed to investigate the impact of hAMSC-Exos on neuronal cells and their role in regulating apoptosis both in vitro and in vivo. METHODS: hAMSC-Exos were isolated via ultracentrifugation and characterized via transmission electron microscopy, particle size analysis, and flow cytometry. In vitro, neuronal damage was induced by lipopolysaccharide (LPS). CP rat models were established via left common carotid artery ligation. Apoptosis levels in cells and CP rats were assessed using flow cytometry, quantitative reverse transcription polymerase chain reaction (RT-qPCR), Western blotting, and TUNEL analysis. RESULTS: The results demonstrated successful isolation of hAMSC-Exos via ultracentrifugation, as the isolated cells were positive for CD9 (79.7%) and CD63 (80.2%). Treatment with hAMSC-Exos significantly mitigated the reduction in cell viability induced by LPS. Flow cytometry revealed that LPS-induced damage promoted apoptosis, but this effect was attenuated by treatment with hAMSC-Exos. Additionally, the expression of caspase-3 and caspase-9 and the Bcl-2/Bax ratio indicated that excessive apoptosis could be attenuated by treatment with hAMSC-Exos. Furthermore, tail vein injection of hAMSC-Exos improved the neurobehavioral function of CP rats. Histological analysis via HE and TUNEL staining showed that apoptosis-related damage was attenuated following hAMSC-Exo treatment. CONCLUSIONS: In conclusion, hAMSC-Exos effectively promote neuronal cell survival by regulating apoptosis, indicating their potential as a promising therapeutic option for CP that merits further investigation.

BiTiS3 bio-transducer with explosive on-demand generation of NO gas for synergetic cancer therapy.

Combined photothermal therapy and nitric oxide (NO)-mediated gas therapy has shown great potential as a cancer treatment. However, the on-demand release of NO at a high concentration presents a challenge owing to the lack of an ideal bio-transducer with a high loading capacity of NO donors and sufficient energy to induce NO release. Here, we present a new 2D BiTiS3 nanosheet that is synthesized, loaded with the NO donor (BNN6), and conjugated with PEG-iRGD to produce a multifunctional bio-transducer (BNN6-BiTiS3-iRGD) for the on-demand production of NO. The BiTiS3 nanosheets not only have a high loading capacity of NO donors (750%), but also exhibit a high photothermal conversion efficiency (59.5%) after irradiation by a 1064-nm laser at 0.5 W/cm2. As a result of the above advantages, the temporal-controllable generation of NO within a large dynamic range (from 0 to 344 µM) is achieved by adjusting power densities, which is among the highest efficiency values reported for NO generators so far. Moreover, the targeted accumulation of BNN6-BiTiS3-iRGD at tumor sites leads to spatial-controllable NO release. In vitro and in vivo assessments demonstrate synergistic NO gas therapy with mild photothermal therapy based on BNN6-BiTiS3-iRGD. Our work provides insights into the design and application of other 2D nanomaterial-based therapeutic platforms.

Transformation of Black Phosphorus through Lattice Reconstruction for NIR-II-Responsive Cancer Therapy.

The photothermal performance of black phosphorus (BP) in the near infrared (NIR)-II bio-window (1000-1500 nm) is low, which limits its biomedical applications. Herein, ultrasmall nickel phosphide quantum dots (Ni2 P QDs) are synthesized with BP quantum dots (BPQDs) as the template by topochemical transformation. The size of Ni2 P QDs is ≈3.5 nm, similar to that of BPQDs, whereas the absorption and photothermal conversion efficiency of Ni2 P QDs at 1064 nm (43.5%) are significantly improved compared with those of BPQDs. To facilitate in vivo applications, an Ni2 P QDs-based liposomal nano-platform (Ni2 P-DOX@Lipo-cRGD) is designed by incorporation of Ni2 P QDs and doxorubicin (DOX) into liposomal bilayers and the interior, respectively. The encapsulated DOX is responsively released from liposomes upon 1064-nm laser irradiation owing to the photothermal effect of Ni2 P QDs, and the drug release rate and amount are controlled by the light intensity and exposure time. In vivo, experiments show that Ni2 P-DOX@Lipo-cRGD has excellent tumor target capability and biocompatibility, as well as complete tumor ablation through the combination of photothermal therapy and chemotherapy. The work provides a new paradigm for the NIR-II transformation of nano-materials and may shed light on the construction of multifunctional nano-platforms for cancer treatment.

Selectively Confined Black Phosphorus Nanowires in Carbon Nanotubes.

Nanoconfinement of low-dimensional materials opens up a new territory for tailoring material hybridization to produce novel geometric structures for applications in electronics, catalysis, and photonics. Despite the progress made in the encapsulation of 2D materials, exploration of their definite crystal structures into lower-dimensional nanomaterials is still largely unexplored. Herein, one-dimensional black phosphorus (BP) nanowires with an aspect ratio of over 100 produced by confining BP into the CNT (conf-BP@CNT) are reported. Notably, the unique structure and dimensions of BP were determined by confinement within the CNT and were accurately characterized by crystallography. During the spatially confined growth, the defects and capillarity effect of the CNT promote nucleation and growth of BP within the CNT. conf-BP@CNT shows surface charge localization of conf-BP and protection rendered by the CNT shell, giving rise to more efficient and stable photocatalytic rhodamine B (RhB) degradation than the bare exfoliated BP nanosheets. These results demonstrate the effectiveness of nanoconfinement in producing nanomaterials with controllable dimensions, precise spatial arrangement, and unique structures.

Bu-Fei Yi-Shen Granules Reduce Acute Exacerbations in Patients with GOLD 3-4 COPD: A Randomized Controlled Trial.

Purpose: Chronic obstructive pulmonary disease (COPD) is a disease characterized by frequent acute exacerbations (AEs), especially in severe and very severe cases. We aimed to evaluate the efficacy and safety of Bu-fei Yi-shen granules (BYGs) for COPD. Patients and Methods: We conducted a multicenter, randomized, double-blinded, placebo-controlled trial of 348 COPD patients with GOLD 3-4 COPD. The patients were randomly assigned into experimental or control groups in a 1:1 ratio. Patients in the experimental group were prescribed BYG, while those in the control group were administered a placebo, orally, twice daily, with 5 days on and 2 days off per week for 52 weeks. The outcomes included AEs, pulmonary function, clinical signs and symptoms, dyspnea scores (mMRC), quality of life scores, and a 6-minute walk test (6MWT). Results: A total of 280 patients completed the trial, including 135 patients in the experimental group and 145 in the control group. Compared to the control group, significant differences were observed in frequencies of AEs (mean difference: -0.35; 95% CI: -0.61, -0.10; P = 0.006) and AE-related hospitalizations (-0.18; 95% CI: -0.36, -0.01; P = 0.04), 6MWD (40.93 m; 95% CI: 32.03, 49.83; P < 0.001), mMRC (-0.57; 95% CI: -0.76, -0.37; P < 0.001), total symptoms (-2.18; 95% CI: -2.84, -1.53; P < 0.001), SF-36 (11.60; 95% CI: 8.23, 14.97; P < 0.001), and mCOPD-PRO (-0.45; 95% CI: -0.57, -0.33; P < 0.001) after treatment. However, there were no significant differences in mortality, pulmonary function, and mESQ-PRO scores (P > 0.05). No obvious adverse events were observed. Conclusion: BYG, as compared to a placebo, could significantly reduce the frequencies of AEs and AE-related hospitalizations for GOLD 3-4 COPD patients. Clinical symptoms, treatment satisfaction, quality of life, and exercise capacity improved. There was no significant improvement in mortality and pulmonary function.

Selective oxidation of p-phenylenediamine for blood glucose detection enabled by Se-vacancy-rich TiSe2-x@Au nanozyme.

Nanozymes with enzyme-like characteristics have drawn wide interest but the catalytic activity and substrate selectivity of nanozymes still need improvement. Herein, Se-vacancy-rich TiSe2-x@Au nanocomposites are designed and demonstrated as nanozymes. The TiSe2-x@Au nanocomposites show excellent peroxidase-like activity and the chromogenic substrate p-phenylenediamine (PPD) can be selectively oxidized to compounds that exhibit an absorption peak at 413 nm that differs from that of self-oxidation or generally oxidized species, suggesting high catalytic activity and strong substrate selectivity. Theoretical calculations reveal that the PPD adsorption geometry at Se vacancies with an adsorption energy of -3.00 eV shows a unique spatial configuration and charge distribution, thereby inhibiting the free reaction and promoting both the activity and selectivity in PPD oxidation. The TiSe2-x@Au colorimetric system exhibits a wide linear range of 0.015 mM-0.6 mM and a low detection limit of 0.0037 mM in the detection of glucose. The blood glucose detection performance for human serum samples is comparable to that of a commercial glucose meter in the hospital (relative standard deviation < 6%). Our findings demonstrate a new strategy for rapid and accurate detection of blood glucose and our results provide insights into the future design of nanozymes.

Synthesis of germanium/germanium phosphide in-plane heterostructure with efficient photothermal and enhanced photodynamic effects in the second near-infrared biowindow.

Inspired by the bifunctional phototherapy agents (PTAs), constructing compact PTAs with efficient photothermal therapy (PTT) and photodynamic therapy (PDT) effects in the near-infrared (NIR-II) biowindow is crucial for high therapeutic efficacy. Herein, none-layered germanium (Ge) is transformed to layered Ge/germanium phosphide (Ge/GeP) structure, and a novel two-dimensional sheet-like compact S-scheme Ge/GeP in-plane heterostructure with a large extinction coefficient of 15.66 L/g cm-1 at 1,064 nm is designed and demonstrated. In addition to the outstanding photothermal effects, biocompatibility and degradability, type I and type II PDT effects are activated by a single laser. Furthermore, enhanced reactive oxygen species generation under longer wavelength NIR laser irradiation is achieved, and production of singlet oxygen and superoxide radical upon 1,064 nm laser irradiation is more than double that under 660 nm laser irradiation. The S-scheme charge transfer mechanism between Ge and GeP, is demonstrated by photo-irradiated Kelvin probe force microscopy and electron spin resonance analysis. Thus, the obtained S-scheme Ge/GeP in-plane heterostructure shows synergistic therapeutic effects of PTT/PDT both in vitro and in vivo in the NIR-II biowindow and the novel nanoplatform with excellent properties has large clinical potential.

Colorimetric immunosensing using liposome encapsulated MnO2 nanozymes for SARS-CoV-2 antigen detection.

Development of specific signal reporters with signal amplification effect are highly needed for sensitive and accurate detection of pathogen. Herein, we design a colorimetric immunosensing nanosystem based on liposome encapsulated quantum dots-sized MnO2 nanozyme (MnO2QDs@Lip) as a signal reporter for ultrasensitive and fast detection of SARS-CoV-2 antigen. The pathogenic antigens captured and separated by antibody-conjugated magnetic beads (MBs) are further connected with antibody-modified MnO2QDs@Lip to form a sandwich-like immunocomplex structure. After triggered release, MnO2 QDs efficiently catalyze colorless 3,3',5,5'-tetramethylbenzidine (TMB) to blue oxidized TMB, which can be qualitatively observed by naked eyes and quantitatively analyzed by UV-Vis spectra or smartphone platforms. By taking advantages of immuno-magnetic separation, excellent peroxidase-like catalytic activity of MnO2 QDs, and high encapsulation efficiency of MnO2QDs@Lip, ultrasensitive detection of SARS-CoV-2 antigen ranging from 0.1 pg/mL to 100 ng/mL is achieved within 20 min. The limit of detection (LOD) is calculated to be 65 fg/mL in PBS buffer. Furthermore, real clinical samples of SARS-CoV-2 antigens can be effectively identified by this immunosensing nanosystem with excellent accuracy. This proposed detection nanosystem provides a strategy for simple, rapid and ultrasensitive detection of pathogens and may shed light on the development of new POCT detection platforms for early diagnosis of pathogens and surveillance in public health.

Regulation of Osteoimmune Microenvironment and Osteogenesis by 3D-Printed PLAG/black Phosphorus Scaffolds for Bone Regeneration.

The treatment of bone defects remains a significant challenge to be solved clinically. Immunomodulatory properties of orthopedic biomaterials have significance in regulating osteoimmune microenvironment for osteogenesis. A lactic acid-co-glycolic acid (PLGA) scaffold incorporates black phosphorus (BP) fabricated by 3D printing technology to investigate the effect of BP on osteoimmunomodulation and osteogenesis in site. The PLGA/BP scaffold exhibits suitable biocompatibility, biodegradability, and mechanical properties as an excellent microenvironment to support new bone formation. The studies' result also demonstrate that the PLGA/BP scaffolds are able to recruit and stimulate macrophages M2 polarization, inhibit inflammation, and promote human bone marrow mesenchymal stem cells (hBMSCs) proliferation and differentiation, which in turn promotes bone regeneration in the distal femoral defect region of steroid-associated osteonecrosis (SAON) rat model. Moreover, it is screened and demonstrated that PLGA/BP scaffolds can promote osteogenic differentiation by transcriptomic analysis, and PLGA/BP scaffolds promote osteogenic differentiation and mineralization by activating PI3K-AKT signaling pathway in hBMSC cells. In this study, it is shown that the innovative PLGA/BP scaffolds are extremely effective in stimulating bone regeneration by regulating macrophage M2 polarization and a new strategy for the development of biomaterials that can be used to repair bone defects is offered.

Biodegradable FePS3 nanoplatform for efficient treatment of osteosarcoma by combination of gene and NIR-II photothermal therapy.

As a common tumor with high incidence, osteosarcoma possesses extremely poor prognosis and high mortality. Improving the survival of osteosarcoma patients is still a great challenge due to the precipice of advancement in treatment. In this study, a combination strategy of gene therapy and photothermal therapy (PTT) is developed for efficient treatment of osteosarcoma. Two-dimensional (2D) FePS3 nanosheets are synthesized and functionalized by poly-L-lysine-PEG-folic acid (PPF) to fabricate a multifunctional nanoplatform (FePS@PPF) for further loading microRNAs inhibitor, miR-19a inhibitor (anti-miR-19a). The photothermal conversion efficiency of FePS@PPF is up to 47.1% under irradiation by 1064 nm laser. In vitro study shows that anti-miR-19a can be efficiently internalized into osteosarcoma cells through the protection and delivery of FePS@PPF nanaocarrier, which induces up-regulation of PTEN protein and down-regulation p-AKT protein. After intravenous injection, the FePS@PPF nanoplatform specifically accumulates to tumor site of osteosarcoma-bearing mice. The in vitro and in vivo investigations reveal that the combined PTT-gene therapy displays most significant tumor ablation compared with monotherapy. More importantly, the good biodegradability promotes FePS@PPF to be cleared from body avoiding potential toxicity of long-term retention. Our work not only develops a combined strategy of NIR-II PTT and gene therapy mediated by anti-miR-19a/FePS@PPF but also provides insights into the design and applications of other nanotherapeutic platforms.

LILRB2/PirB mediates macrophage recruitment in fibrogenesis of nonalcoholic steatohepatitis.

Inhibition of immunocyte infiltration and activation has been suggested to effectively ameliorate nonalcoholic steatohepatitis (NASH). Paired immunoglobulin-like receptor B (PirB) and its human ortholog receptor, leukocyte immunoglobulin-like receptor B (LILRB2), are immune-inhibitory receptors. However, their role in NASH pathogenesis is still unclear. Here, we demonstrate that PirB/LILRB2 regulates the migration of macrophages during NASH by binding with its ligand angiopoietin-like protein 8 (ANGPTL8). Hepatocyte-specific ANGPTL8 knockout reduces MDM infiltration and resolves lipid accumulation and fibrosis progression in the livers of NASH mice. In addition, PirB-/- bone marrow (BM) chimeras abrogate ANGPTL8-induced MDM migration to the liver. And yet, PirB ectodomain protein could ameliorate NASH by sequestering ANGPTL8. Furthermore, LILRB2-ANGPTL8 binding-promoted MDM migration and inflammatory activation are also observed in human peripheral blood monocytes. Taken together, our findings reveal the role of PirB/LILRB2 in NASH pathogenesis and identify PirB/LILRB2-ANGPTL8 signaling as a potential target for the management or treatment of NASH.

Interfacial Engineering Enables Perovskite Heteroepitaxial Growth on Black Phosphorus for Flexible X-ray Detectors.

2D materials with atomic-scale thickness and mechanical robustness are required for flexible devices. The superior optoelectronic properties and high-Z atoms in metal halide perovskites render them desirable for X-ray detection, but the intrinsic brittleness is an obstacle hampering the applications in flexible detectors. Herein, an interfacial engineering strategy is demonstrated for the epitaxial growth of methylammonium lead bromide (MAPbBr3 ) on black phosphorus (BP) for flexible X-ray detectors. The mechanically robust, high-quality heterostructure consisting of a Pb transition layer is synthesized for the two-way bridging of BP and MAPbBr3 . Excellent optoelectronic properties such as a high X-ray sensitivity of 1,609 ± 122 µC Gy-1  cm-2 (80 times higher than that of the commercial amorphous Se), a fast response time of 40 ± 5 ms, as well as a low detection limit of 3 µGys-1 (about a fifteenth of the medical chest X-ray dose rate) are achieved from the simple and planar direct X-ray detector fabricated on an organic filter membrane. More importantly, these flat and simple devices are bendable and mechanically durable by exhibiting only 10% photocurrent degradation after 200 bending cycles. The novel heterostructure has great potential in large-area, flexible, and sensitive X-ray detection applications.

Renaissance of elemental phosphorus materials: properties, synthesis, and applications in sustainable energy and environment.

The polymorphism of phosphorus-based materials has garnered much research interest, and the variable chemical bonding structures give rise to a variety of micro and nanostructures. Among the different types of materials containing phosphorus, elemental phosphorus materials (EPMs) constitute the foundation for the synthesis of related compounds. EPMs are experiencing a renaissance in the post-graphene era, thanks to recent advancements in the scaling-down of black phosphorus, amorphous red phosphorus, violet phosphorus, and fibrous phosphorus and consequently, diverse classes of low-dimensional sheets, ribbons, and dots of EPMs with intriguing properties have been produced. The nanostructured EPMs featuring tunable bandgaps, moderate carrier mobility, and excellent optical absorption have shown great potential in energy conversion, energy storage, and environmental remediation. It is thus important to have a good understanding of the differences and interrelationships among diverse EPMs, their intrinsic physical and chemical properties, the synthesis of specific structures, and the selection of suitable nanostructures of EPMs for particular applications. In this comprehensive review, we aim to provide an in-depth analysis and discussion of the fundamental physicochemical properties, synthesis, and applications of EPMs in the areas of energy conversion, energy storage, and environmental remediation. Our evaluations are based on recent literature on well-established phosphorus allotropes and theoretical predictions of new EPMs. The objective of this review is to enhance our comprehension of the characteristics of EPMs, keep abreast of recent advances, and provide guidance for future research of EPMs in the fields of chemistry and materials science.

CsPbBr3-DMSO merged perovskite micro-bricks for efficient X-ray detection.

Inorganic perovskite wafers with good stability and adjustable sizes are promising in X-ray detection but the high synthetic temperature is a hindrance. Herein, dimethyl sulfoxide (DMSO) is used to prepare the CsPbBr3 micro-bricks powder at room temperature. The CsPbBr3 powder has a cubic shape with few crystal defects, small charge trap density, and high crystallinity. A trace amount of DMSO attaches to the surface of the CsPbBr3 micro-bricks via Pb-O bonding, forming the CsPbBr3-DMSO adduct. During hot isostatic processing, the released DMSO vapor merges the CsPbBr3 micro-bricks, producing a compact and dense CsPbBr3 wafer with minimized grain boundaries and excellent charge transport properties. The CsPbBr3 wafer shows a large mobility-lifetime (µτ) product of 5.16 × 10-4 cm2·V-1, high sensitivity of 14,430 µC·Gyair-1·cm-2, low detection limit of 564 nGyair·s-1, as well as robust stability in X-ray detection. The results reveal a novel strategy with immense practical potential pertaining to high-contrast X-ray detection. Electronic Supplementary Material: Supplementary material (further details of the characterization, SEM images, AFM images, KPFM images, schematic illustration, XRD patterns, XPS spectra, FTIR spectra, UPS spectra, and stability tests) is available in the online version of this article at 10.1007/s12274-023-5487-3.