ABSTRACT
The main objective of this study was to prepare functional allopurinol (ALP) incorporated biomaterials using mungbean starch, polyvinyl alcohol, melanin (MEL), and plasticizers. Prepared biomaterials were characterized by FE-SEM and FT-IR analysis. Photothermal conversion efficiencies and ALP release properties of biomaterials were evaluated with NIR laser irradiation. When biomaterials were irradiated with the NIR laser, temperatures increase of MEL-added biomaterials were higher than those of MEL-non-added biomaterials. After NIR laser irradiation, ALP release rates of MEL-added biomaterials were 1.62 times faster than those of MEL-non-added biomaterials. In addition, ALP release using an artificial skin was increased by NIR laser irradiation. ALP release from biomaterials followed Fickian diffusion mechanism, while ALP release using an artificial skin followed a non-Fickian diffusion mechanism. Xanthine oxidase inhibitory (%) for MEL-added biomaterials with/without the addition of GL and XL were 47.5%, 61.7%, and 65.1%, respectively.
Subject(s)
Biocompatible Materials , Starch , Allopurinol/pharmacology , Drug Liberation , Melanins , Spectroscopy, Fourier Transform InfraredABSTRACT
This study focuses on the synthesis of functional allopurinol (ALP) imprinted biomaterials for a transdermal drug delivery using mung bean starch (MBS), polyvinyl alcohol (PVA), sodium benzoate (SB) as a crosslinking agent, and poloxamer (PX) as a thermo-sensitive polymer. Prepared functional biomaterials were characterized and evaluated by SEM, FT-IR analysis, and physical properties. Results of ALP recognition properties indicated that adsorbed amounts (Q) of ALP on functional ALP imprinted biomaterials were 3.8 to 4.9-fold higher than that of non-ALP imprinted biomaterial. Results of ALP release revealed that the ALP release rate for PX added biomaterials was 1.10 (36.5 °C) or 1.30 (45 °C) times faster than that at 25 °C. These results indicate that functional ALP imprinted biomaterials have thermo-sensitive properties due to the addition of PX. Results of ALP release using artificial skin indicated that ALP release was increased at a relatively steady-state rate for 3 h and that the ALP release behavior followed the non-Fickian diffusion mechanism.
Subject(s)
Allopurinol/chemistry , Drug Delivery Systems/methods , Starch/pharmacology , Administration, Cutaneous , Adsorption , Allopurinol/pharmacology , Biocompatible Materials/pharmacology , Diffusion/drug effects , Hydrogels , Polymers/chemistry , Polyvinyl Alcohol/chemistry , Spectroscopy, Fourier Transform Infrared/methods , Transdermal PatchABSTRACT
The main objective of this work was to prepare inulin (INL)/polyvinyl alcohol (PVA) biomaterials imprinted with arbutin (AR) as the target drug. INL from Jerusalem artichoke flour was extracted with hot water extraction method. INL/PVA biomaterials were synthesized with a casting method and a UV curing. The optimal UV curing time and sodium benzoate content were about 10 min and 0.1 wt%, respectively. The biomaterials were characterized by SEM and FT-IR analysis. Mechanical properties of prepared AR imprinted biomaterials were also investigated. AR release was examined with changes of pH at 36.5 °C. The AR release ratio was also investigated using artificial skin. It was found that AR was released constantly for 40 min. Results of drug release mechanism indicated that AR release followed the Fickian diffusion behavior, whereas drug release using artificial skin followed the non-Fickian diffusion behavior. Tyrosinase inhibitory (%) for AR imprinted biomaterials with/without the addition of GL were 58.8% and 79.2%, respectively.
Subject(s)
Arbutin , Drug Delivery Systems , Helianthus/chemistry , Inulin , Polyvinyl Alcohol , Arbutin/chemistry , Arbutin/pharmacokinetics , Inulin/chemistry , Inulin/pharmacokinetics , Polyvinyl Alcohol/chemistry , Polyvinyl Alcohol/pharmacokinetics , SolubilityABSTRACT
In this work, biodegradable biomaterial films for sulindac (SLD) recognition are synthesized from mungbean starch (MBS), PVA, and plasticizers by using UV irradiation process and casting methods. The optimal UV irradiation time for the preparation of SLD imprinted biomaterials films was about 30 min. Mechanical properties, recognition ability, and SLD release property for prepared films were investigated. From the results of recognition ability, we verified that these SLD imprinted biomaterial films have the binding site for SLD. The release properties of SLD was examined with the change of pH and temperature. The results indicate that the SLD release in pH 10.0 was higher than in pH 4.0. SLD release was also evaluated using an artificial skin. Results of the artificial skin test verified that SLD was released constantly for 20 days.
Subject(s)
Biocompatible Materials/chemistry , Starch/chemistry , Sulindac/chemistry , Vigna/chemistry , Drug Delivery Systems/methods , Membranes, Artificial , SolubilityABSTRACT
This paper reports on a method of preparing chitosan-based films to which sulfosuccinic acid (SSA) is added for crosslinking agent with/without UV curing treatment and applications of a coating materials for foods. The physical, thermal, and optical properties of the UV cured chitosan-based films are investigated including their tensile strength (TS), elongation at break (%E), degree of swelling (DS), solubility (S), and water vapor absorption as well as their biodegradability in soil and applicability of the coating on a fruit. We also evaluated the physical properties of the prepared films to which glycerol (GL), xylitol (XL), and sorbitol (SO) are added to be used as plasticizers. The surface and topography of the prepared films are investigated by scanning electronic microscopy (SEM) and atomic force microscopy analysis (AFM). The results indicate that the films UV cured for 20min possess optimal physical and thermal properties compared to that of non-cured films. The mechanical, thermal, and water barrier properties of SO-added film are also found to be superior to other films with added GL and XL. The degree of biodegradability revealed that the films are degraded by about 40-65% after 220days.
Subject(s)
Chitosan/chemistry , Cross-Linking Reagents/chemistry , Food Packaging/methods , Polyvinyl Alcohol/chemistry , Succinates/chemistry , Ultraviolet Rays , Biodegradable Plastics/chemistry , Biodegradable Plastics/radiation effectsABSTRACT
In this study, nanocomposite films were synthesized by chitosan (CH), PVA, ZnS, sulfosuccinic acid, and plasticizers. The nanocomposite films were cross-linked by the heat curing process. ZnS was synthesized by the reaction of Zn(CH3COO)2 and Na2S2O3·5H2O in aqueous solution via a template-free hydrothermal process. The prepared ZnS and CH/PVA nanocomposite films were characterized by X-ray diffraction, Fourier transform IR spectroscopy, and scanning electronic microscopy. The results of this study confirmed the presence of specific peaks of ZnS in the prepared nanocomposite films, and the intensity of these peaks increased with increasing ZnS contents. Tensile strength, elongation at break, water barrier properties, and thermal properties of the prepared nanocomposite films were also investigated, indicating that the addition of ZnS nanoparticles improved the physical and thermal properties. In addition, the photocatalytic degradability of the prepared films containing ZnS nanoparticles was evaluated using 2,4-dichlorophenoxyacetic acid and methyl orange.
Subject(s)
Chitosan/chemistry , Nanocomposites/chemistry , Nanoparticles/chemistry , Sulfides/chemistry , Zinc Compounds/chemistry , 2,4-Dichlorophenoxyacetic Acid/chemistry , Azo Compounds/chemistry , Catalysis , Photochemical Processes , Tensile Strength , Water/chemistryABSTRACT
In this work, ZnS microspheres consisting of nanoblocks were synthesized by a simple, template-free approach employing a hydrothermal reaction at different temperatures, using Zn(CH3COO)2 and Na2S2O3 · 5H2O as starting materials in the aqueous solution. The synthesized samples were characterized using field-emission scanning electron microscopy (FE-SEM), X-ray diffraction (XRD), and Brunauer-Emmett-Teller (BET). The photocatalysts were evaluated using photodecomposition of methylene blue under UV-C light. The photocatalytic degradation rate followed a pseudo-first-order equation. The kinetic constant (k1) of the ZnS microspheres was 5.43 x 10(-2) min(-1).
ABSTRACT
To investigate the calcium phosphate forming ability of ZrO(2) thin film, we prepared ZrO(2)/Si structure by a chemical solution deposition with a zirconium naphthenate as a starting material. Precursor sol was spin-coated onto the cleaned Si substrate and prefired at 500 degrees C for 10 min in air, followed by final annealing at 800 degrees C for 30 min in air. Surface morphology and surface roughness of the annealed layer were characterized by field emission-scanning electron microscope and atomic force microscope. After soaking for 5 days in a simulated body fluid, formation of the calcium phosphate on nanocrystalline ZrO(2) layer annealed at 800 degrees C was observed by energy dispersive X-ray spectrometer. Fourier transform infrared spectroscopy revealed that carbonate was substituted into the calcium phosphate.