Tuning the optoelectronic properties of selenophene-diketopyrrolopyrrole-based non-fullerene acceptor to obtain efficient organic solar cells through end-capped modification.

With the goal of developing a high-performance organic solar cell, nine molecules of A2-D-A1-D-A2 type are originated in the current investigation. The optoelectronic properties of all the proposed compounds are examined by employing the DFT approach and the B3LYP functional with a 6-31G (d, p) basis set. By substituting the terminal moieties of reference molecule with newly proposed acceptor groups, several optoelectronic and photovoltaic characteristics of OSCs have been studied, which are improved to a significant level when compared with reference molecule, i.e., absorption properties, excitation energy, exciton binding energy, band gap, oscillator strength, electrostatic potential, light-harvesting efficiency, transition density matrix, open-circuit voltage, fill factor, density of states and interaction coefficient. All the newly developed molecules (P1-P9) have improved λmax, small band gap, high oscillator strengths, and low excitation energies compared to the reference molecule. Among all the studied compounds, P9 possesses the least binding energy (0.24 eV), P8 has high interaction coefficient (0.70842), P3 has improved electron mobility due to the least electron reorganization energy (λe = 0.009182 eV), and P5 illustrates high light-harvesting efficiency (0.7180). P8 and P9 displayed better Voc results (1.32 eV and 1.33 eV, respectively) and FF (0.9049 and 0.9055, respectively). Likewise, the phenomenon of charge transfer in the PTB7-Th/P1 blend seems to be a marvelous attempt to introduce them in organic photovoltaics. Consequently, the outcomes of these parameters demonstrate that adding new acceptors to reference molecule is substantial for the breakthrough development of organic solar cells (OSCs).

Quantum Chemical Approach of Hexaammine (NH3)6 complexant with alkali and alkaline earth metals for their potential use as NLO materials.

In this study, nine new electron rich compounds are presented, and their electronic, geometrical, and nonlinear optical (NLO) characteristics have been investigated by using the Density functional theory. The basic design principle of these compounds is placing alkaline earth metal (AEM) inside and alkali metal (AM) outside the hexaammine complexant. The properties of nine newly designed compounds are contrasted with the reference molecule (Hexaammine). The effect of this doping on Hexaamine complexant is explored by different analyses such as electron density distribution map (EDDM), frontier molecular orbitals (FMOs), density of states (DOS) absorption maximum (λmax), hyperpolarizabilities, dipole moment, transition density matrix (TDM). Non-covalent interaction (NCI) study assisted with isosurfaces has been accomplished to explore the vibrational frequencies and types of synergy. The doping of hexaammine complexant with AM and AEM significantly improved its characteristics by reducing values of HOMO-LUMO energy gaps from 10.7eV to 3.15eV compared to 10.7 eV of hexaammine. The polarizability and hyperpolarizability (αo and ßo) values inquisitively increase from 72 to 919 au and 4.31 × 10-31 to 2.00 × 10-27esu respectively. The higher values of hyperpolarizability in comparison to hexaammine (taken as a reference molecule) are credited to the presence of additional electrons. The absorption profile of the newly designed molecules clearly illustrates that they are highly accompanied by higher λmax showing maximum absorbance in red and far-red regions ranging from 654.07 nm to 783.94 nm. These newly designed compounds have superior outcomes having effectiveness for using them as proficient NLO materials and have a gateway for advanced investigation of more stable and highly progressive NLO materials.

Novel A-π-D-π-A type non-fullerene acceptors of dithienyl diketopyrropopyrrole derivatives to enhance organic photovoltaic applications: a DFT study.

To boost the photovoltaic attributes of organic photovoltaic cells, seven dithienyl diketopyrropopyrrole (TDPP) donor-based A-π-D-π-A (acceptor-bridge-donor-bridge-acceptor) type molecules (TM1-TM7) were formulated by modifying the electron accepting ends of the reference molecule (TMR). Optical and quantum chemical parameters of seven synthesized molecules were investigated using density functional theory with the MPW1PW91/6-31G(d,p) functional. Several parameters that can be used to measure and improve the efficiency of solar cells have been analyzed and summed up. These parameters include binding energy of exciton, excitation energy of electron, reorganization energies, dipole moment, molecular electrostatic potential, charge mobility, wavelength of maximum absorption, open circuit voltage, short circuit current, fill factor, density of states, transition density matrices, as well as iso-surface and non-covalent interactions. Thus, all of our proposed structures are perceived to be superior to the reference in terms of the maximum possible solar energy yield in solar cells with bulk heterojunctions, as determined by analyses of our designed molecules for the aforementioned parameters.

Effect of a standardized maternal meal on fetal middle cerebral artery Doppler indices: A single-blinded crossover study.

OBJECTIVE: Measures of Doppler blood flow velocity profiles are an integral part of monitoring fetal well-being during pregnancy. These examinations are performed at different times of the day and at different maternal meal states. In uncomplicated pregnancies, we assessed the effect of a standardized maternal meal on middle cerebral artery (MCA) and umbilical artery (UA) Doppler blood flow velocity pulsatility indices (PIs) and MCA peak systolic velocity (PSV). METHODS: In this prospective single-blinded crossover study 25 healthy women were examined at 36 weeks of pregnancy. The first examination was performed in the morning following overnight fast, and repeated after extended fast (state A), and after a standard breakfast meal (state B). RESULTS: Irrespective of maternal prandial status, the MCA-PI values were lower in the 2nd compared to the 1st examination (-0.187; p = 0.071, and -0.113; p = 0.099, state A and B, respectively). Compared to the values in the 1st examination, the UA-PI values, were higher after extended fast (0.014; p = 0.436), and lower post-prandially (-0.036; p = 0.070). The difference (state B minus state A) between the meal states were not significant (0.074; p = 0.487 and -0.050; p = 0.058, for MCA-PI and UA-PI, respectively). Adjusting for the possible influence of fetal heart rate on MCA-PI and UA-PI, the differences between meal states remained non-significant (p = 0.179, p = 0.064, respectively). The MCA-PSV values increased after the meal (6.812; p = 0.035), whereas no increase was observed following extended fast (0.140; p = 0.951). The difference in MCA-PSV values between the two meal states was not significant (6.672; p = 0.055). CONCLUSION: Our results demonstrate possible diurnal variations in MCA-PI and UA-PI, with and without adjustment for fetal heart rate, that seem to be unaffected by maternal meal intake in healthy pregnancies.

Molecular Modeling of Pentacyclic Aromatic Bislactam-Based Small Donor Molecules by Altering Auxiliary End-Capped Acceptors to Elevate the Photovoltaic Attributes of Organic Solar Cells.

Small-molecule (SM)-based organic solar cells (OSCs) have dominated the photovoltaic industry on account of their efficient optical and electronic properties. This quantum mechanical study addresses a DFT study of pentacyclic aromatic bislactam (PCL)-based small molecules for extremely proficient OSCs. Five novel small molecules (PCLM1-PCLM5) retaining the A-π-A-π-D-π-A-π-A arrangement were fabricated from the reference PCLR. At the MPW1PW91/6-31G** level of theory, detailed profiling of these novel molecules was performed by accurately following DFT, along with the time-dependent density functional theory (TD-DFT) hypothetical simulations to analyze the UV-visible absorption (λmax), light-harvesting efficiency (LHE), dipole moment (µ), fill factor (FF), open-circuit voltage (V OC), power conversion efficiency (PCE), frontier molecular orbitals (FMOs), binding energy (E b), density of states (DOS), electrostatic potential (ESP), and transition density matrix (TDM) plots. Alteration of peripheral acceptors in all of the molecular structures drastically modified their charge-transfer properties, such as a strong light-harvesting capability in the range of 0.9993-0.9998, reduced exciton E b (from 0.34 to 0.39 eV), a reduced bandgap (E g) in the range of 1.66-1.99 eV, an elevated λmax (775-959 nm) along with a higher µ in the solvent phase (1.934-7.865 D) when studied in comparison with PCLR, possessing an LHE of 0.9986, an E b of 0.40, an E g 2.27 eV, λmax at 662 nm, and a µ of 0.628 D. The FMO analysis revealed the uniform dispersal of charge density entirely along the highest occupied (HOMO) and lowest unoccupied (LUMO) molecular orbitals in newly constructed moieties. Electron as well as hole mobility rates, V OC, FF, and PCE of all novel molecules (PCLM1-PCLM5) were higher as compared with those of PCLR, ultimately making them exceptional candidates for solar devices. Focusing on the outcomes, terminal acceptor modification was found to be a suitable method for the development of highly tuned OSCs in the future.

Remarkable non-linear optical properties of gold cluster doped graphyne (GY): A DFT study.

The nonlinear optical (NLO) properties of gold (Au) doped graphyne (GY) complexes are the subject of this quantum mechanical investigation. Detailed profiling of GY@Aucenter, GY@Auside, GY@2Auabove,GY@2Auperpendicular, and GY@3Aucenter is accomplished at CAM-B3LYP/LANL2DZ. The differential influence of various GY based complexes on molecular geometry, vertical ionization energy (VIE), interaction energy (Eint), frontier molecular orbitals (FMOs), density of states (DOS), absorption maximum (λmax), molecular electrostatic potential (MEP), electron density distribution map (EDDM), transition density matrix (TDM), dipole moment (µ) and non-linear optical (NLO) properties have been investigated. Non-covalent interaction (NCI) analysis has been done to explore the sort of interactions in designed complexes. The vibrational frequencies are probed via infrared (IR) analysis. Doping tactics in all complexes dramatically changed charge carrier properties, such as shrinking band gap (Eg) and increasing λmax in the range of 3.97-5.58 eV and 288-562 nm respectively, compared to pure GY with 5.78 eV Eg and 265 nm λmax. When compared to GY (αO = 281.54 andßO = 0.21 au), GY@3Aucenter exhibited a significant increase in static mean polarizability (αO = 415 au) and the mean first hyperpolarizability (ßo = 3652 au) attributable to its lowest excitation energy (ΔE). GY doping has been discovered to be advantageous for designing potential nanoscale devices by focusing on the symphony between small Au clusters and GY and their impacts on NLO aspects.

Silver cluster doped graphyne (GY) with outstanding non-linear optical properties.

This research study addresses the computational simulations of optical and nonlinear optical (NLO) characteristics of silver (Ag) cluster doped graphyne (GY) complexes. By precisely following DFT and TD-DFT hypothetical computations, in-depth characterization of GY@Agcenter, GY@Agside, GY@2Agperpendicular, GY@2Agabove, and GY@3Agcenter is accomplished using CAM-B3LYP/LANL2DZ while the CAM-B3LYP/mixed basis set is used for study of 2GY@Agcenter, 2GY@Agside, 2GY@2Agperpendicular, 2GY@2Agabove, and 2GY@3Agcenter. The effects of various graphyne surface based complexes on hyperpolarizabilities, frontier molecular orbitals (FMOs), density of states (DOS), absorption maximum (λ max), binding energy (E b), dipole moment (µ), electron density distribution map (EDDM), transition density matrix (TDM), electrostatic potential (ESP), vertical ionization energy (E VI) and electrical conductivity (σ) have been investigated. Infrared (IR), non-covalent interaction (NCI) analysis accompanied by isosurface are performed to study the vibrational frequencies and type of interaction. Doping strategies in all complexes impressively reformed charge transfer characteristics such as narrowing band gap (E g) in the range of 2.58-4.73 eV and enhanced λ max lying in the range of 368-536 nm as compared to pure GY with 5.78 eV E g and 265 nm λ max for (GY@Agcenter-GY@3Agcenter). In the case of (2GY@Agcenter-2GY@3Agcenter), when compared to 2GY with 5.58 eV E g and 275 nm absorption, maximum doping techniques have more effectively modified λ max in the region of 400-548 nm and E g, which is in the order of 2.55-4.62 eV. GY@3Agcenter and 2GY@3Agcenter reflected a noteworthy increment in linear polarizability α O (436.90 au) and (586 au) and the first hyperpolarizability ß O (5048.77 au) and (17 270 au) because of their lowest excitation energy (ΔE) when studied in comparison with GY (α O = 281.54 and ß O = 0.21 au) and 2GY surface (α O = 416 and ß O = 0.06 au). Focusing on harmony between the tiny Ag clusters and graphyne surface as well as their influences on NLO properties, graphyne doping using its two-unit cells (2GY) is found to be expedient for the development of future nanoscale devices.

Bithieno Thiophene-Based Small Molecules for Application as Donor Materials for Organic Solar Cells and Hole Transport Materials for Perovskite Solar Cells.

This quantum mechanical study focuses on the designing of twelve (MPAM1-MPAM12) bithieno thiophene (BTTI) central core-based small molecules to explore optoelectronic properties as donor candidates for organic solar cells (OSCs) and hole transport materials (HTMs) accompanied by enhanced charge mobility for perovskite solar cells (PSCs). MPAM1-MPAM6 have been designed by the substitution of thiophene-bridged end-capped acceptors on both side terminals of reference (MPAR). MPAM7-MPAM12 are tailored by adopting the same tactic on one side terminal only. MPW1PW91/6-311G (d,p) has been employed for all computational simulations. MPAM12 revealed the highest λmax at 639 nm in dichloromethane (DCM) solvent with the lowest E g of 1.78 eV and dipole moment (20.74 D) in the solvent phase, showing excellent miscibility as compared to the reference. All designed chromophores (MPAM1-MPAM12) demonstrated higher estimated V OC and power conversion efficiency (PCE) when compared to MPAR, suggesting their prominent operational efficiency. Among all, MPAM4 manifested the highest PCE (47.86%). MPAM2 portrayed the highest electron mobility (0.0041573 eV) and MPAM3 exhibited the highest hole mobility (0.0047178 eV). The outcomes highlight the adequacy of the planned strategies, paving a new route for the development of small-molecule HTMs for PSCs and donor contributors for OSCs.

Tuning the optoelectronic properties of triphenylamine (TPA) based small molecules by modifying central core for photovoltaic applications.

Small donor molecules based on fused ring acceptors exhibit encouraging photovoltaic properties and expeditious advancement in organic solar cells. Central core modification of non-fullerene acceptor materials is a favorable methodology to enhance electronic properties and efficiency for OSCs. Herein, four new donor molecules, namely, BDTM1, PYRM2, ANTM3, and NM4 are designed with a strong donor moiety triphenylamine, tetracyanobutadiene as acceptor unit, and thiophene as spacer linked to a modified central core. Geometric parameters, optical, electrical properties, effect of central core modification on tailored molecules BDTM1-NM4 are investigated and compared with reference DPPR. DFT together with TDDFT approaches using MPW1PW91 functional is used to study key parameters like absorption maximum (λmax), frontier molecular approach, ionization potential, electron affinity, the density of states, transition density matrix along with open-circuit voltage (VOC), dipole moment and reorganization energy. Among all these molecules, BDTM1 shows maximum calculated absorption λmax (817 nm) and the lowest band gap (2.54 eV). This bathochromic shift in BDTM1 is due to the presence of 4,8-dimethoxy-2,6-di-2-thienylbenzodithiophene as a strong electron-withdrawing group. Computed reorganization energies (RE) shows that BDTM1 has the highest hole and electron mobility among all designed molecules. Combination of BDTM1 donor and PC61BM acceptor further verifies charge transfer and their interaction. The results illustrate that designed donor molecules (BDTM1-NM4) are better in performance and are recommended for experimentation to develop efficient OSCs. Four new donor molecules, namely, BDTM1, PYRM2, ANTM3, and NM4 are designed with a strong donor moiety triphenylamine, tetracyanobutadiene as acceptor unit and thiophene as spacer linked to a modified central core. Geometric parameters, optical, electrical properties, effect of central core modification on tailored molecules BDTM1-NM4 are investigated and compared with reference DPPR.

The impact of umbilical vein blood flow and glucose concentration on blood flow distribution to the fetal liver and systemic organs in healthy pregnancies.

Glucose is a major energy substrate for the fetus, including liver, heart, and brain metabolism. The umbilical vein (UV) blood flow supplies the fetal liver directly from the placenta, whereas a fraction is shunted via ductus venosus (DV) to the fetal systemic circulation bypassing the fetal liver. We hypothesized UV glucose concentration to be a major regulator of the distribution of glucose supply between the fetal liver and DV, and explored the influence of maternal metabolic status on this distribution. We included 124 healthy women with normal singleton pregnancies, scheduled for elective cesarean section. UV and DV blood flow measurements were performed by Doppler ultrasound immediately before, and blood samples were obtained during surgery. UV blood flow was significantly correlated with DV blood flow, liver blood flow, and the DV shunting fraction, while UV glucose concentration was not. For normal-weight mothers, the maternal-fetal glucose gradient was positively correlated with DV shunting fraction, and negatively with liver blood flow. For the fetuses of the overweight mothers no such correlation was found. This indicates that within the normal physiological range the human fetus makes adaptations of blood flow to ensure individual needs related to the offered maternal energy supply.

Smart injectable self-setting bioceramics for dental applications.

A thermo-responsive injectable bioactive glass (BAG) that has the ability to set at body temperature was prepared using pluronic F127 and hydroxypropyl methylcellulose as the carrier. The injectable composite has the advantage to fill irregular shape implantation sites and quick setting at body temperature. The structural and morphological analysis of injectable BAG before and after setting was done by using Fourier Transform Infrared spectroscopy (FTIR), and Scanning Electron Microscope (SEM). The effect of an ultrasonic scaler for a quick setting of injectable BAG was also investigated. The ultrasonic scaler sets the BAG formulation three-folds faster than at body temperature and homogenized the dispersion. The in vitro bio-adhesion was studied in the bovine tooth in both artificial saliva and deionized water for periodic time intervals, i.e., day 7, 30, 90, and 180, which confirmed the apatite layer formation. The mineral density analysis was used to differentiate the newly formed apatite with tooth apatite. In the MTT assay, the experimental material showed continuous proliferation and cell growth. This indicated that injectable hydrogel promoted cell growth, facilitated proliferation, and had no cytotoxic effect. The SEM and micro-CT results (performed after in vitro bioactivity testing) showed that the injectable BAG had the ability to regenerate dentin, hence this material has the potential to be used for dental and biomedical applications including tooth and bone regeneration in minimally invasive procedures in future.

Tri-layered functionally graded membrane for potential application in periodontal regeneration.

A novel tri-layered, functionally-graded chitosan membrane (FGM) with bioactive glass gradient (50%, 25%, and 0% wt.) was developed by lyophilization. A step-wise grading of chitosan, bioactive glass (BG), and Pluronic F127 was introduced into the membrane in which each layer has separate surface functions that play a role of guided tissue regeneration (GTR) membranes. The lower layer was designed to replicate alveolar bone and contains 50%wt. BG, the middle layer contains 25%wt. BG, while the upper layer was non-porous without BG and it did not support cell growth. Scanning Electron Microscopy (SEM) revealed that the lower FGM surface possessed a porous structure with embedded BG particles, while the upper surface was non-porous with interconnected architecture. The contact angle measurement confirmed that the surface with BG was hydrophilic (≈00), while the opposite surface was hydrophobic (910 ±â€¯3.840). Both osteoblast and fibroblast cells have maximum adhesion at contact angle <80°. Alamar blue assay revealed the biocompatibility of the MC3T3-E1 mouse pre-osteoblasts cells with these membranes in vitro. The cells attachment and proliferation was seen for lower surface, while no cells adhesion was observed for the upper layer. Additionally, the interaction of the tissue with these tri-layered membranes was also investigated in vivo. Hematoxylin and eosin staining revealed the biocompatible nature of these membranes. Altogether, these results indicated that due to the biocompatible nature of these membranes, they will be a good carrier of in vivo implantation.

Bi-layered α-tocopherol acetate loaded membranes for potential wound healing and skin regeneration.

With an increase in the demand for skin regeneration products, there is a noticeable increase in developing materials that encourage, wound healing and skin regeneration. It has been reported that antioxidants play an important role in anti-inflammatory reactions, cellular proliferation and remodeling phase of wound healing. While consideration all these factors, a novel α-tocopherol acetate (vitamin E) (VE) loaded bi-layered electrospun membrane, based on lower polycaprolactone (PCL) layer and upper polylactic acid (PLA) layer, was fabricated through electrospinning. Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), in-vitro degradation studies, swelling studies and VE release studies were performed to evaluate structural, physical and in-vitro behavior of membranes. Biological properties of membranes were evaluated through cell proliferation assay, cell adhesion studies, live/dead cell assay and CAM assay. SEM images showed that the average diameter of nanofibers ranged from 1 to 6 µm, while addition of VE changed the diameter and morphology of fibers. Bi-layered membranes showed significant swelling behavior through water uptake, membranes loaded with 30% VE showed 8.7% and 6.8% degradation in lysozyme and H2O2 respectively. 20% and 30% VE loaded membranes followed Korsmeyer-Peppas and first order drug release kinetics followed by non-fickian drug release kinetics. Membranes showed non-toxic behavior and supported cell proliferation via alamar blue assay, cell adhesion via SEM, cell viability via live/dead assay and wound healing by scratch assay. CAM assay showed that membranes having VE supported angiogenesis and showed significant formation of blood vessels making it suitable for skin regeneration and wound healing. Results showed that large surface area of nanofibers, porous structure and biocompatible nature are suitable for targeted clinical applications.

Fabrication, in vitro and in vivo studies of bilayer composite membrane for periodontal guided tissue regeneration.

Development of a guided occlusive biodegradable membrane with controlled morphology in order to restrict the ingrowth of epithelial cells is still a challenge in dental tissue engineering. A bilayer membrane with a non-porous upper layer (polyurethane) and porous lower layer (polycaprolactone and bioactive glass composite) with thermoelastic properties to sustain surgery treatment was developed by lyophilization. Morphology, porosity, and layers attachment were controlled by using the multi-solvent system. In vitro and in vivo biocompatibility, cell attachment, and cell proliferation were analyzed by immunohistochemistry and histology. The cell proliferation rate and cell attachment results showed good biocompatibility of both surfaces, though cell metabolic activity was better on the polycaprolactone-bioactive glass surface. Furthermore, the cells were viable, adhered, and proliferated well on the lower porous bioactive surface, while non-porous polyurethane surface demonstrated low cell attachment, which was deliberately designed and a pre-requisite for guided tissue regeneration/guided bone regeneration membranes. In addition, in vivo studies performed in a rat model for six weeks revealed good compatibility of membranes. Histological analysis (staining with hematoxylin and eosin) indicated no signs of inflammation or accumulation of host immune cells. These results suggested that the fabricated biocompatible bilayer membrane has the potential for use in periodontal tissue regeneration.

Identification of anti-cancer potential of doxazocin: Loading into chitosan based biodegradable hydrogels for on-site delivery to treat cervical cancer.

In this study, an effective, biocompatible and biodegradable co-polymer comprising of chitosan (CS) and polyvinyl alcohol (PVA) hydrogels, chemically crosslinked and impregnated with doxazocin, is reported. The chemical structural properties of the hydrogels were evaluated by Fourier Transform Infrared spectroscopy (FTIR) and physical properties were analysed by scanning electron microscopy (SEM). The swelling behaviour is an important parameter for drug release mechanism and was investigated to find out the solution absorption capacity of the synthesized hydrogels. MTT assay revealed that doxazocin loaded hydrogels significantly hindered the cell viability. Flow cytometry analysis was performed to analyse the effect of 8CLH and 4CLH on regulation of cell cycle. Moreover, in vivo anti-cancer potential of synthesized hydrogels was assessed by CAM Assay. Results displayed that 8CLH with 1mg/ml of doxazocin had prominently decreased the angiogenesis and significantly increased the number of cells in G1 phase of cell cycle. These results declared that 8CLH will be a good addition among hydrogels used for treatment of cancer by onsite delivery of drug.

Triethyl orthoformate covalently cross-linked chitosan-(poly vinyl) alcohol based biodegradable scaffolds with heparin-binding ability for promoting neovascularisation.

There is a need to develop pro-angiogenic biomaterials to promote wound healing and to assist in regenerative medicine. To this end, various growth factors have been exploited which have the potential to promote angiogenesis. However, these are generally expensive and labile which limits their effectiveness. An alternative approach is to immobilize heparin onto biocompatible degradable hydrogels. The heparin in turn will then bind endogenous proangiogenic growth factors to induce formation of new blood vessels.In this study, we continue our development of hydrogels for wound healing purposes by exploring covalently cross-linking chitosan and polyvinyl alcohol hydrogels using triethyl orthoformate. Two concentrations of triethyl orthoformate (4 and 16%) were compared for their effects on the structure of hydrogels - their swelling, pore size, and rate of degradation and for their ability to support the growth of cells and for their heparin-binding capacity and their effects on angiogenesis in a chick chorioallantoic membrane assay.Hydrogels formed with 4 or 16% both triethyl orthoformate cross-linker were equally cyto-compatible. Hydrogels formed with 4% triethyl orthoformate absorbed slightly more water than those made with 16% triethyl orthoformate and broke down slightly faster than non-cross-linked hydrogels. When soaked in heparin the hydrogel formed with 16% triethyl orthoformate showed more blood vessel formation in the CAM assay than that formed with 4% triethyl orthoformate.

Effect of calcium hydroxide on mechanical strength and biological properties of bioactive glass.

In this manuscript for the first time calcium hydroxide (Ca(OH)2) has been used for preparation of bioactive glass (BG-2) by co-precipitation method and compared with glass prepared using calcium nitrate tetrahydrate Ca(NO3)2·4H2O (BG-1), which is a conventional source of calcium. The new source positively affected physical, biological and mechanical properties of BG-2. The glasses were characterized by Fourier transform infrared (FTIR), X-Ray Diffractometer (XRD), Scanning Electron Microscopy (SEM), Thermogravimetric Analysis/Differential Scanning Calorimetry (TGA-DSC), BET surface area analysis and Knoop hardness. The results showed that BG-2 possessed relatively larger surface properties (100m(2)g(-1) surface area) as compared to BG-1 (78m(2)g(-1)), spherical morphology and crystalline phases (wollastonite and apatite) after sintering at lower than conventional temperature. These properties contribute critical role in both mechanical and biological properties of glasses. The Knoop hardness measurements revealed that BG-2 possessed much better hardness (0.43±0.06GPa at 680°C and 2.16±0.46GPa at 980°C) than BG-1 (0.24±0.01 at 680°C and 0.57±0.07GPA at 980°C) under same conditions. Alamar blue Assay and confocal microscopy revealed that BG-2 exhibited better attachment and proliferation of MG63 cells. Based on the improved biological properties of BG-2 as a consequent of novel calcium source selection, BG-2 is proposed as a bioactive ceramic for hard tissue repair and regeneration applications.