Mild-Temperature Supercritical Water Confined in Hydrophobic Metal-Organic Frameworks.

Fluids under extreme confinement show characteristics significantly different from those of their bulk counterpart. This work focuses on water confined within the complex cavities of highly hydrophobic metal-organic frameworks (MOFs) at high pressures. A combination of high-pressure intrusion-extrusion experiments with molecular dynamic simulations and synchrotron data reveals that supercritical transition for MOF-confined water takes place at a much lower temperature than in bulk water, ∼250 K below the reference values. This large shifting of the critical temperature (Tc) is attributed to the very large density of confined water vapor in the peculiar geometry and chemistry of the cavities of Cu2tebpz (tebpz = 3,3',5,5'-tetraethyl-4,4'-bipyrazolate) hydrophobic MOF. This is the first time the shift of Tc is investigated for water confined within highly hydrophobic nanoporous materials, which explains why such a large reduction of the critical temperature was never reported before, neither experimentally nor computationally.

Improving Activity of New Arylurea Agents against Multidrug-Resistant and Biofilm-Producing Staphylococcus epidermidis.

Multidrug-resistant (MDR) strains of Staphylococcus epidermidis (S. epidermidis), prevalent in hospital environments, contribute to increased morbidity and mortality, especially among newborns, posing a critical concern for neonatal sepsis. In response to the pressing demand for novel antibacterial therapies, we present findings from synthetic chemistry and structure-activity relationship studies focused on arylsulfonamide/arylurea derivatives of aryloxy[1-(thien-2-yl)propyl]piperidines. Through bioisosteric replacement of the sulfonamide fragment with a urea moiety, compound 25 was identified, demonstrating potent bacteriostatic activity against clinical multidrug-resistant S. epidermidis strains (MIC50 and MIC90 = 1.6 and 3.125 µg/mL). Importantly, it showed activity against linezolid-resistant strains and exhibited selectivity over mammalian cells. Compound 25 displayed antibiofilm-forming properties against clinical S. epidermidis strains and demonstrated the capacity to eliminate existing biofilm layers. Additionally, it induced complete depolarization of the bacterial membrane in clinical S. epidermidis strains. In light of these findings, targeting bacterial cell membranes with compound 25 emerges as a promising strategy in the fight against multidrug-resistant S. epidermidis strains.

Exploring the Heat of Water Intrusion into a Metal-Organic Framework by Experiment and Simulation.

Wetting of a solid by a liquid is relevant for a broad range of natural and technological processes. This process is complex and involves the generation of heat, which is still poorly understood especially in nanoconfined systems. In this article, scanning transitiometry was used to measure and evaluate the pressure-driven heat of intrusion of water into solid ZIF-8 powder within the temperature range of 278.15-343.15 K. The conditions examined included the presence and absence of atmospheric gases, basic pH conditions, solid sample origins, and temperature. Simultaneously with these experiments, molecular dynamics simulations were conducted to elucidate the changing behavior of water as it enters into ZIF-8. The results are rationalized within a temperature-dependent thermodynamic cycle. This cycle describes the temperature-dependent process of ZIF-8 filling, heating, emptying, and cooling with respect to the change of internal energy of the cycle from the calculated change in the specific heat capacity of the system. At 298 K the experimental heat of intrusion per gram of ZIF-8 was found to be -10.8 ± 0.8 J·g-1. It increased by 19.2 J·g-1 with rising temperature to 343 K which is in a reasonable match with molecular dynamic simulations that predicted 16.1 J·g-1 rise. From these combined experiments, the role of confined water in heat of intrusion of ZIF-8 is further clarified.

Quality-dependent performance of hydrophobic ZIF-67 upon high-pressure water intrusion-extrusion process.

Zeolitic imidazolate framework (ZIF) microporous materials have already been employed in many fields of energetic and environmental interest since the last decade. The commercial scale production of some of these materials makes them more accessible for their implementation in industrial processes; however, their massive synthesis may entail modifications to the preparation protocols, which may result in a loss in the optimization of this process and a drop in the material's quality. This fact may have implications for the performance of these materials during their lifetime, especially when they are used in applications such as energy dissipation, in which they are subjected to several operating cycles under high pressures. This study focuses on ZIF-67, a material that has demonstrated in the past its ability to dissipate energy through the water intrusion-extrusion process under high pressure. Two ZIF-67 samples were synthesized using different protocols, and 2 batches of different qualities (labelled as high quality (HQ) and low quality (LQ)) were obtained and analysed by water porosimetry to study their performance in the intrusion-extrusion process. Unexpectedly, minor structural differences, which are typically neglected especially under production conditions, had a dramatic effect on their performance. The results presented in this study reiterate the importance of quality control with respect to reproducibility of experimental results. In a broader perspective, they are critical to the technology transfer from academia to industry.

Effect of Crystallite Size on the Flexibility and Negative Compressibility of Hydrophobic Metal-Organic Frameworks.

Flexible nanoporous materials are of great interest for applications in many fields such as sensors, catalysis, material separation, and energy storage. Of these, metal-organic frameworks (MOFs) are the most explored thus far. However, tuning their flexibility for a particular application remains challenging. In this work, we explore the effect of the exogenous property of crystallite size on the flexibility of the ZIF-8 MOF. By subjecting hydrophobic ZIF-8 to hydrostatic compression with water, the flexibility of its empty framework and the giant negative compressibility it experiences during water intrusion were recorded via in operando synchrotron irradiation. It was observed that as the crystallite size is reduced to the nanoscale, both flexibility and the negative compressibility of the framework are reduced by ∼25% and ∼15%, respectively. These results pave the way for exogenous tuning of flexibility in MOFs without altering their chemistries.

Superiority of the Triple-Acting 5-HT6R/5-HT3R Antagonist and MAO-B Reversible Inhibitor PZ-1922 over 5-HT6R Antagonist Intepirdine in Alleviation of Cognitive Deficits in Rats.

The multifactorial origin and neurochemistry of Alzheimer's disease (AD) call for the development of multitarget treatment strategies. We report a first-in-class triple acting compound that targets serotonin type 6 and 3 receptors (5-HT-Rs) and monoamine oxidase type B (MAO-B) as an approach for treating AD. The key structural features required for MAO-B inhibition and 5-HT6R antagonism and interaction with 5-HT3R were determined using molecular dynamic simulations and cryo-electron microscopy, respectively. Bioavailable PZ-1922 reversed scopolamine-induced cognitive deficits in the novel object recognition test. Furthermore, it displayed superior pro-cognitive properties compared to intepirdine (a 5-HT6R antagonist) in the AD model, which involved intracerebroventricular injection of an oligomeric solution of amyloid-ß peptide (oAß) in the T-maze test in rats. PZ-1922, but not intepirdine, restored levels of biomarkers characteristic of the debilitating effects of oAß. These data support the potential of a multitarget approach involving the joint modulation of 5-HT6R/5-HT3R/MAO-B in AD.

Bimetallic Zeolitic Imidazole Frameworks for Improved Stability and Performance of Intrusion-Extrusion Energy Applications.

Hydrophobic flexible zeolitic imidazole frameworks (ZIFs) represent reference microporous materials in the area of mechanical energy storage, conversion, and dissipation via non-wetting liquid intrusion-extrusion cycle. However, some of them exhibit drawbacks such as lack of stability, high intrusion pressure, or low intrusion volume that make them non-ideal materials to consider as candidates for real applications. In this work, we face these limitations by exploiting the hybrid ZIF concept. Concretely, a bimetallic SOD-like ZIF consisting of Co and Zn ions was synthesized and compared with Co-ZIF (ZIF-67) and Zn-ZIF (ZIF-8) showing for the first time that the hybrid ZIF combines the good stability of ZIF-8 with the higher water intrusion volume of ZIF-67. Moreover, it is shown that the hybrid-ZIF approach can be used to tune the intrusion/extrusion pressure, which is crucial for technological applications.

Mechanism of Water Intrusion into Flexible ZIF-8: Liquid Is Not Vapor.

Zeolitic Imidazolate Frameworks (ZIF) find application in storage and dissipation of mechanical energy. Their distinctive properties linked to their (sub)nanometer size and hydrophobicity allow for water intrusion only under high hydrostatic pressure. Here we focus on the popular ZIF-8 material investigating the intrusion mechanism in its nanoscale cages, which is the key to its rational exploitation in target applications. In this work, we used a joint experimental/theoretical approach combining in operando synchrotron experiments during high-pressure intrusion experiments, molecular dynamics simulations, and stochastic models to reveal that water intrusion into ZIF-8 occurs by a cascade filling of connected cages rather than a condensation process as previously assumed. The reported results allowed us to establish structure/function relations in this prototypical microporous material, representing an important step to devise design rules to synthesize porous media.

Optimization of the wetting-drying characteristics of hydrophobic metal organic frameworks via crystallite size: The role of hydrogen bonding between intruded and bulk liquid.

HYPOTHESIS: The behavior of Heterogeneous Lyophobic Systems (HLSs) comprised of a lyophobic porous material and a corresponding non-wetting liquid is affected by a variety of different structural parameters of the porous material. Dependence on exogenic properties such as crystallite size is desirable for system tuning as they are much more facilely modified. We explore the dependence of intrusion pressure and intruded volume on crystallite size, testing the hypothesis that the connection between internal cavities and bulk water facilitates intrusion via hydrogen bonding, a phenomenon that is magnified in smaller crystallites with a larger surface/volume ratio. EXPERIMENTS: Water intrusion/extrusion pressures and intrusion volume were experimentally measured for ZIF-8 samples of various crystallite sizes and compared to previously reported values. Alongside the practical research, molecular dynamics simulations and stochastic modeling were performed to illustrate the effect of crystallite size on the properties of the HLSs and uncover the important role of hydrogen bonding within this phenomenon. FINDINGS: A reduction in crystallite size led to a significant decrease of intrusion and extrusion pressures below 100 nm. Simulations indicate that this behavior is due to a greater number of cages being in proximity to bulk water for smaller crystallites, allowing cross-cage hydrogen bonds to stabilize the intruded state and lower the threshold pressure of intrusion and extrusion. This is accompanied by a reduction in the overall intruded volume. Simulations demonstrate that this phenomenon is linked to ZIF-8 surface half-cages exposed to water being occupied by water due to non-trivial termination of the crystallites, even at atmospheric pressure.

Design and synthesis of novel arylurea derivatives of aryloxy(1-phenylpropyl) alicyclic diamines with antimicrobial activity against multidrug-resistant Gram-positive bacteria.

The alarming increase in the resistance of bacteria to the currently available antibiotics necessitates the development of new effective antimicrobial agents that are active against bacterial pathogens causing major public health problems. For this purpose, our in-house libraries were screened against a wide panel of clinically relevant Gram-positive and Gram-negative bacteria, based on which compound I was selected for further optimization. Synthetic efforts in a group of arylurea derivatives of aryloxy(1-phenylpropyl) alicyclic diamines, followed with an in vitro evaluation of the activity against multidrug-resistant strains identified compound 44 (1-(3-chlorophenyl)-3-(1-{3-phenyl-3-[3-(trifluoromethyl)phenoxy] propyl}piperidin-4-yl)urea). Compound 44 showed antibacterial activity against Gram-positive bacteria including fatal drug-resistant strains i.e., Staphylococcus aureus (methicillin-resistant, MRSA; vancomycin-intermediate, VISA) and Enterococcus faecium (vancomycin-resistant, VREfm) at low concentrations (0.78-3.125 µg/mL) comparable to last resort antibiotics (i.e., vancomycin and linezolid). It is also potent against biofilm-forming S. aureus and Staphylococcus epidermidis (including linezolid-resistant, LRSE) strains, but with no activity against Gram-negative bacteria (Escherichia coli, Klebsiella pneumoniae and Pseudomonas aeruginosa). Compound 44 showed strong bactericidal properties against susceptible and drug-resistant Gram-positive bacteria. Depolarization of the bacterial cytoplasmic membrane induced by compound 44 suggests a dissipation of the bacterial membrane potential as its mechanism of antibacterial action. The high antimicrobial activity of compound 44, along with its selectivity over mammalian cells (lung MCR-5 and skin BJ fibroblast cell lines) and no hemolytic properties toward horse erythrocytes, proposes arylurea derivatives of aryloxy(1-phenylpropyl) alicyclic diamines for development of novel antibacterial agents.

Impact of the Substitution Pattern at the Basic Center and Geometry of the Amine Fragment on 5-HT6 and D3R Affinity in the 1H-Pyrrolo[3,2-c]quinoline Series.

Salt bridge (SB, double-charge-assisted hydrogen bonds) formation is one of the strongest molecular non-covalent interactions in biological systems, including ligand-receptor complexes. In the case of G-protein-coupled receptors, such an interaction is formed by the conserved aspartic acid (D3.32) residue and the basic moiety of the aminergic ligand. This study aims to determine the influence of the substitution pattern at the basic nitrogen atom and the geometry of the amine moiety at position 4 of 1H-pyrrolo[3,2-c]quinoline on the quality of the salt bridge formed in the 5-HT6 receptor and D3 receptor. To reach this goal, we synthetized and biologically evaluated a new series of 1H-pyrrolo[3,2-c]quinoline derivatives modified with various amines. The selected compounds displayed a significantly higher 5-HT6R affinity and more potent 5-HT6R antagonist properties when compared with the previously identified compound PZ-1643, a dual-acting 5-HT6R/D3R antagonist; nevertheless, the proposed modifications did not improve the activity at D3R. As demonstrated by the in silico experiments, including molecular dynamics simulations, the applied structural modifications were highly beneficial for the formation and quality of the SB formation at the 5-HT6R binding site; however, they are unfavorable for such interactions at D3R.

The Constitutive Activity of Spinal 5-HT6 Receptors Contributes to Diabetic Neuropathic Pain in Rats.

Diabetic neuropathy is often associated with chronic pain. Serotonin type 6 (5-HT6) receptor ligands, particularly inverse agonists, have strong analgesic potential and may be new candidates for treating diabetic neuropathic pain and associated co-morbid cognitive deficits. The current study addressed the involvement of 5-HT6 receptor constitutive activity and mTOR signaling in an experimental model of diabetic neuropathic pain induced by streptozocin (STZ) injection in the rat. Here, we show that mechanical hyperalgesia and associated cognitive deficits are suppressed by the administration of 5-HT6 receptor inverse agonists or rapamycin. The 5-HT6 receptor ligands also reduced tactile allodynia in traumatic and toxic neuropathic pain induced by spinal nerve ligation and oxaliplatin injection. Furthermore, both painful and co-morbid cognitive symptoms in diabetic rats are reduced by intrathecal delivery of a cell-penetrating peptide that disrupts 5-HT6 receptor-mTOR physical interaction. These findings demonstrate the deleterious influence of the constitutive activity of spinal 5-HT6 receptors upon painful and cognitive symptoms in diabetic neuropathic pains of different etiologies. They suggest that targeting the constitutive activity of 5-HT6 receptors with inverse agonists or disrupting the 5-HT6 receptor-mTOR interaction might be valuable strategies for the alleviation of diabetic neuropathic pain and cognitive co-morbidities.

Discovery of SI 1/20 and SI 1/22 as Mutual Prodrugs of 5-Fluorouracil and Imidazole-Based Heme Oxygenase 1 Inhibitor with Improved Cytotoxicity in DU145 Prostate Cancer Cells.

In this work, we extend the concept of 5-fluorouracil/heme oxygenase 1 (5-FU/HO-1) inhibitor hybrid as an effective strategy for enhancing 5-FU-based anticancer therapies. For this purpose, we designed and synthesized new mutual prodrugs, named SI 1/20 and SI 1/22, in which the two active parent drugs (i. e., 5-FU and an imidazole-based HO-1 inhibitor) were connected through an easily cleavable succinic linker. Experimental hydrolysis rate, and in silico ADMET predictions were indicative of good drug-likeness and pharmacokinetic properties. Novel hybrids significantly reduced the viability of prostate DU145 cancer cells compared to the parent compounds 5-FU and HO-1 inhibitor administered alone or in combination. Interestingly, both compounds showed statistically significant lower toxicity, than 5-FU at the same dose, against non-tumorigenic human benign prostatic hyperplasia (BPH-1) cell line. Moreover, the newly synthesized mutual prodrugs inhibited the HO-1 activity both in a cell-free model and in vitro, as well as downregulated the HO-1 expression and increased the reactive oxygen species (ROS) levels.

New, Eco-Friendly Method for Synthesis of 3-Chlorophenyl and 1,1'-Biphenyl Piperazinylhexyl Trazodone Analogues with Dual 5-HT1A/5-HT7 Affinity and Its Antidepressant-like Activity.

Serotonin 5-HT1A and 5-HT7 receptors play an important role in the pathogenesis and pharmacotherapy of depression. Previously identified N-hexyl trazodone derivatives, 2-(6-(4-(3-chlorophenyl)piperazin-1-yl)hexyl)-[1,2,4]triazolo[4,3-a]pyridin-3(2H)-one hydrochloride (7a·HCl), with high affinity for 5-HT1AR and 2-(6-(4-([1,1'-biphenyl]-2-yl)piperazin-1-yl)hexyl)-[1,2,4]triazolo[4,3-a]pyridin-3(2H)-one hydrochloride (7b·HCl), a dual-acting 5-HT1A/5-HT7 receptor ligand, were prepared with a new microwave-assisted method. The protocol for the synthesis of 7a and 7b involved reductive alkylation under a mild reducing agent. We produced the final compounds with yield of 56-63% using ethanol or 51-56% in solvent-free conditions in 4 min. We then determined the 5-HT7R binding mode for compounds 7a and 7b using in silico methods and assessed the preliminary ADME and safety properties (hepatotoxicity and CYP3A4 inhibition) using in vitro methods for 7a·HCl and 7b·HCl. Furthermore, we evaluated antidepressant-like activity of the dual antagonist of 5-HT1A/5-HT7 receptors (7b·HCl) in the forced swim test (FST) in mice. The 5-HT1AR ligand (7a·HCl) with a much lower affinity for 5-HT7R compared to that of 7b·HCl was tested comparatively. Both compounds showed antidepressant activity, while 5-HT1A/5-HT7 double antagonist 7b·HCl showed a stronger and more specific response.

Ligand assisted CuAAC labelling and RP-HPLC analysis of zidovudine and Retrovir using propargyl-Fmoc probe.

The extensive application of zidovudine (ZDV) as a stand-alone anti-HIV drug and a component in antiviral combination therapies, has made its analysis important both in the pharmaceutical and environmental context. The azide group in ZDV structure makes it a ready-to-use substrate for copper-catalyzed azide-alkyne cycloaddition (CuAAC), which is an efficient method for "click chemistry" labeling. In this paper, we describe a ligand-assisted CuAAC procedure for the precolumn derivatization of ZDV. We used propargyl-Fmoc fluorescent label and trans-2-(4-((dimethylamino)methyl)-1H-1,2,3-triazol-1-yl)cyclohexan-1-ol (AMTC) as a copper-binding ligand. We tested the applicability of AMTC for precolumn derivatization and developed chromatographic analytical procedures for ZDV and its formulation (50 mg/5 ml oral solution, Retrovir™ syrup). Our research aimed to improve labeling efficiency with a Cu-chelating ligand, using an accessible and affordable fluorescent probe. We also developed a sustainable mechanochemical synthesis procedure for obtaining propargyl-Fmoc in a gram scale and thus boosted the accessibility of this probe. The advantages of the developed derivatization procedure are its simplicity and easy availability of the propargyl-Fmoc probe. Moreover, the high lipophilicity of the propargyl-Fmoc probe enables efficient separation of the analyte from polar matrix components. In addition, the derivatization procedure can be performed directly on a sample solution. We tested its usability for samples in environmental and biological matrices, including tap water, river water, urine, and human serum.

Turning Molecular Springs into Nano-Shock Absorbers: The Effect of Macroscopic Morphology and Crystal Size on the Dynamic Hysteresis of Water Intrusion-Extrusion into-from Hydrophobic Nanopores.

Controlling the pressure at which liquids intrude (wet) and extrude (dry) a nanopore is of paramount importance for a broad range of applications, such as energy conversion, catalysis, chromatography, separation, ionic channels, and many more. To tune these characteristics, one typically acts on the chemical nature of the system or pore size. In this work, we propose an alternative route for controlling both intrusion and extrusion pressures via proper arrangement of the grains of the nanoporous material. To prove the concept, dynamic intrusion-extrusion cycles for powdered and monolithic ZIF-8 metal-organic framework were conducted by means of water porosimetry and in operando neutron scattering. We report a drastic increase in intrusion-extrusion dynamic hysteresis when going from a fine powder to a dense monolith configuration, transforming an intermediate performance of the ZIF-8 + water system (poor molecular spring) into a desirable shock-absorber with more than 1 order of magnitude enhancement of dissipated energy per cycle. The obtained results are supported by MD simulations and pave the way for an alternative methodology of tuning intrusion-extrusion pressure using a macroscopic arrangement of nanoporous material.

New N-aryl-N'-aryl-/(thio)ureido-/sulfamoylamino-derivatives of alkyl/alkylcarbamoyl piperazines: Effect of structural modifications on selectivity over 5-HT1A receptor.

The 5-HT1A receptors are an important biological target in the treatment of CNS diseases. Recently, their importance in the context of non-CNS disease entities has also been postulated. In the light of these reports, we designed a new group of urea derivatives of N-aryl-N'-aryl-/(thio)ureido-/sulfamoylamino-derivatives of alkyl/alkylcarbamoyl piperazines as 5-HT1AR ligands, focusing on increasing receptor selectivity. We made structural modifications in three areas of the molecule. In the course of our research, we obtained a ligand with reduced basicity (6f), which, despite the loss of the protonable nitrogen atom, did not lose its affinity for the 5-HT1AR (Ki = 35 nM) with a simultaneous increase in selectivity. In particular, a decrease in affinity for D2R (Ki = 1940 nM) was observed, which was analyzed using molecular modeling methods, including FMO and molecular dynamics. Basic ADME-Tox parameters were characterized for 6f, confirming its potential applicability in pharmacotherapy.

Overcoming undesirable hERG affinity by incorporating fluorine atoms: A case of MAO-B inhibitors derived from 1 H-pyrrolo-[3,2-c]quinolines.

The incorporation of the fluorine motif is a strategy widely applied in drug design for modulating the activity, physicochemical parameters, and metabolic stability of chemical compounds. In this study, we attempted to reduce the affinity for ether-à-go-go-related gene (hERG) channel by introducing fluorine atoms in a group of 1H-pyrrolo[3,2-c]quinolines that are capable of inhibiting monoamine oxidase type B (MAO-B). A series of structural modifications guided by in vitro evaluation of MAO-B inhibition and antitargeting for hERG channels were performed, which led to the identification of 1-(3-chlorobenzyl)-4-(4,4-difluoropiperidin-1-yl)-1H-pyrrolo[3,2-c]quinoline (26). Compound 26 acted as a reversible MAO-B inhibitor exhibiting selectivity over 45 targets, enzymes, transporters, and ion channels, and showed potent glioprotective properties in cultured astrocytes. In addition, the compound demonstrated good metabolic stability in rat liver microsomes assay, a favorable safety profile, and brain permeability. It also displayed procognitive effects in the novel object recognition test in rats and antidepressant-like activity in forced swim test in mice. The findings of the study suggest that reversible MAO-B inhibitors can have potential therapeutic applications in Alzheimer's disease.

Effects of ketamine optical isomers, psilocybin, psilocin and norpsilocin on time estimation and cognition in rats.

RATIONALE: Ketamine and psilocybin belong to the rapid-acting antidepressants but they also produce psychotomimetic effects including timing distortion. It is currently debatable whether these are essential for their therapeutic actions. As depressed patients report that the "time is dragging," we hypothesized that ketamine and psilocybin-like compounds may produce an opposite effect, i.e., time underestimation, purportedly contributing to their therapeutic properties. OBJECTIVES: Timing was tested following administration of (R)- and (S)-ketamine, and psilocybin, psilocin, and norpsilocin in the discrete-trial temporal discrimination task (TDT) in male rats. Timing related to premature responses, and cognitive and unspecific effects of compounds were tested in the 5-choice serial reaction time task (5-CSRTT) in the standard 1-s, and "easier" 2-s stimulus duration conditions, as well as in the vITI variant promoting impulsive responses. RESULTS: (S)-ketamine (15 but not 3.75 or 7.5 mg/kg) shifted psychometric curve to the right in TDT and reduced premature responses in 5-CSRTT, suggesting expected time underestimation, but it also decreased the accuracy of temporal discrimination and increased response and reward latencies, decreased correct responses, and increased incorrect responses. While (R)-ketamine did not affect timing and produced no unspecific actions, it reduced incorrect responses in TDT and increased accuracy in 5-CSRTT, suggesting pro-cognitive effects. Psilocin and psilocybin produced mainly unspecific effects in both tasks, while norpsilocin showed no effects. CONCLUSIONS: Time underestimation produced by (S)-ketamine could be associated with its antidepressant effects; however, it was accompanied with severe behavioral disruption. We also hypothesize that behavioral disruption produced by psychedelics objectively reflects their psychotomimetic-like actions.