Natural approach of using nisin and its nanoform as food bio-preservatives against methicillin resistant Staphylococcus aureus and E.coli O157:H7 in yoghurt.

BACKGROUND: Natural antimicrobial agents such as nisin were used to control the growth of foodborne pathogens in dairy products. The current study aimed to examine the inhibitory effect of pure nisin and nisin nanoparticles (nisin NPs) against methicillin resistant Staphylococcus aureus (MRSA) and E.coli O157:H7 during the manufacturing and storage of yoghurt. Nisin NPs were prepared using new, natural, and safe nano-precipitation method by acetic acid. The prepared NPs were characterized using zeta-sizer and transmission electron microscopy (TEM). In addition, the cytotoxicity of nisin NPs on vero cells was assessed using the 3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay. The minimum inhibitory concentrations (MICs) of nisin and its nanoparticles were determined using agar well-diffusion method. Further, fresh buffalo's milk was inoculated with MRSA or E.coli O157:H7 (1 × 106 CFU/ml) with the addition of either nisin or nisin NPs, and then the inoculated milk was used for yoghurt making. The organoleptic properties, pH and bacterial load of the obtained yoghurt were evaluated during storage in comparison to control group. RESULTS: The obtained results showed a strong antibacterial activity of nisin NPs (0.125 mg/mL) against MRSA and E.coli O157:H7 in comparison with control and pure nisin groups. Notably, complete eradication of MRSA and E.coli O157:H7 was observed in yoghurt formulated with nisin NPs after 24 h and 5th day of storage, respectively. The shelf life of yoghurt inoculated with nisin nanoparticles was extended than those manufactured without addition of such nanoparticles. CONCLUSIONS: Overall, the present study indicated that the addition of nisin NPs during processing of yoghurt could be a useful tool for food preservation against MRSA and E.coli O157:H7 in dairy industry.

Antimicrobial activity of chitosan- edible films containing a combination of carvacrol and rosemary nano-emulsion against Salmonella enterica serovar Typhimurium and Listeria monocytogenes for ground meat.

This research aimed to assess the potential of active food packaging as an innovative approach to enhance the quality of fresh food products. Specifically, our focus was on developing chitosan edible films combined with rosemary nanoemulsion (Ch-RNE) and carvacrol nano-emulsion (Ch-CNE) as effective antibacterial food packaging solutions. The efficacy of these films against artificially inoculated L. monocytogenes (NCTC 13372\ ATCC® 7644) as a Gram-positive bacterium, and S. enterica serovar Typhimurium (ATCC 14028) as a Gram-negative bacterium, in ground meat was investigated. The size of the prepared nano-emulsions was characterized using zeta sizer, FTIR and HRTEM. The MIC of both nano-emulsions against both pathogens was found to be 0.78 % and 1.56 %. Filmogenic mixtures were casted using these concentrations, which were then dried and evaluated for their physical and mechanical properties.

Colon-specific tablets containing 5-fluorouracil microsponges for colon cancer targeting.

Most anticancer medications undergo major first-pass metabolism in the intestinal wall, the liver, or both. 5-fluorouracil (5-FU) is known to have erratic oral bioavailability due to first-pass metabolism. The present study aimed to develop 5-FU-loaded microsponges (MS) compressed in enteric-coated tablets as a new colon targeting to colorectal cancer. MS was prepared as a controlled release system for 5-FU and characterized for drug encapsulation efficiency, and surface morphology. Further, hydroxypropyl methylcellulose (HPMC) was mixed with pectin and characterized for their flow as a tablet coat enclosing the core tablets of 5-FU-MS. Moreover, in vitro drug release behavior was studied in different pH media, while the X-ray imaging was used to monitor the in vivo movement of prepared tablets containing 5-FU-MS throughout the GI system. The results showed that MS were spherical in shape and have several pores on their surfaces. The encapsulation efficiency was from 71.80 ± 1.62% - 101.3 ± 2.60%, while the particle size was from 53.11 ± 41.03 - 118.12 ± 48.21 nm. The formulated tablets were fulfilling all official and other specifications and exhibited sustained release of 5-FU only inside the colon. The in vivo human volunteer study of X-ray has shown that the tablets ultimately reached the colon without disturbing in the upper GI system. The obtained carrier formulation is considered as a novel system to deliver 5-FU to the colon tumor with 100% targeting without any drug release in the upper GIT or first-pass metabolism.

Design and synthesis of novel pyrazolo[3,4-d]pyrimidin-4-one bearing quinoline scaffold as potent dual PDE5 inhibitors and apoptotic inducers for cancer therapy.

PDE5 targeting represents a new and promising strategy for apoptosis induction and inhibition of tumor cell growth due to its over-expression in diverse types of human carcinomas. Accordingly, we report the synthesis of series of pyrazolo[3,4-d]pyrimidin-4-one carrying quinoline moiety (11a-r) with potential dual PDE5 inhibition and apoptotic induction for cancer treatment. These hybrids were structurally elucidated and characterized with variant spectroscopic techniques as 1H NMR, 13C NMR and elemental analysis. The assessment of their anticancer activities has been declared. All the rationalized compounds 11a-r have been selected for their cytotoxic activity screening by NCI against 60 cell lines. Compounds 11a, 11b, 11j and 11k were the most active hybrids. Among all, compound 11j was further selected for five dose tesing and it displayed outstanding activity with strong antitumor activity against the nine tumor subpanels tested with selectivity ratios ranging from 0.019 to 8.3 at the GI50 level. Further, the most active targets 11a, b, j and k were screened for their PDE5 inhibitory activity, compound 11j (with IC50 1.57 nM) exhibited the most potent PDE5 inhibitory activity. Moreover, compound 11j is also showed moderate EGFR inhibition with IC50 of 5.827 ± 0.46 µM, but significantly inhibited the Wnt/ß-catenin pathway with IC501286.96 ± 12.37 ng/mL. In addition, compound 11j induced the intrinsic apoptotic mitochondrial pathway in HepG2 cells as evidenced by the lower expression levels of the anti-apoptotic Bcl-2 protein, and the higher expression of the pro-apoptotic protein Bax, p53, cytochrome c and the up-regulated active caspase-9 and caspase-3 levels. All results confirmed by western blotting assay. Compound 11j exhibit pre G1 apoptosis and cell cycle arrest at G2/M phase. In conclusion, hybridization of quinoline moiety with the privileged pyrazolo[3,4-d]pyrimidinon-4-one structure resulted in highly potent anticancer agent, 11j, which deserves more study, in particular, in vivo and clinical investiagtions, and it is expected that these results would be applied for more drug discovery process.

In vitro and in vivo characterization of domperidone-loaded fast dissolving buccal films.

The delivery of drugs via fast dissolving films is an effective alternative for drugs with low bioavailability when administered by other routes. This is the case of domperidone (DMP) an anti-emetic drug with low water solubility and vulnerable to extensive first-pass effect. To overcome these limitations, in this work, we designed and produced fast dissolving muco-adhesive buccal films of domperidone using varying amount polyvinylpyrrolidone (PVP K-90) using the solvent casting method. Films loaded with more than 10% of drug were not homogenous and opaque as indicated by white patches of drug in the film matrix. Formulation of DMP in the film form resulted in conversion of the drug from crystalline state to the semi-crystalline state as indicated by X-ray powder diffraction analysis. Moreover, about 40% of drug loaded within the films was released during the first five minutes compared to only about only 6.5% of pure drug in drug dissolution assays in vitro. In vivo pharmacokinetics analysis revealed that the DMP-loaded film had higher maximum plasma concentration (Cmax) and shorter time to reach Cmax (Tmax) than a commercially available tablet formulation. In conclusion, the produced DMP buccal film formulation showed high absorption rate, rapid onset of action, and improved bioavailability compared with the conventional tablet. Our findings may support the development of novel dosage forms for the transmucosal delivery of DMP for convenient, rapid, and effective treatment of nausea and vomiting.

Utilizing mixer torque rheometer in the prediction of optimal wet massing parameters for pellet formulation by extrusion/spheronization.

In this study, we aimed to optimize theophylline pellet formulations using a two-factor three-level full-factorial design (32) by monitoring the concentration of two pellet excipients, polyvinyl pyrrolidone K30 (PVP) binder solution (X1) and the hydrophilic excipient mannitol (X2). Their impact on pellet characteristics (responses) were evaluated. Increasing PVP concentration in the binder solution resulted in an increase in the wet mass torque value. The effect of mannitol, however, was antagonistic. Moreover, the pellet particle size was significantly influenced by the level of mannitol, PVP solution, and quadratic effect of mannitol. Mannitol significantly antagonized the pellet particle size. Furthermore, increased mannitol concentrations significantly enhanced drug dissolution rate from the pellets, whereas PVP concentration in the binder solution significantly reduced the drug dissolution rate. In conclusion, wet granulations can be controlled by monitoring the composition of the binder solution and pellet composition.

Chitosan-Gelatin Hydrogel Crosslinked With Oxidized Sucrose for the Ocular Delivery of Timolol Maleate.

Ocular hypertension due to increased intraocular pressure is a major risk factor for the development of glaucoma. Rapid clearance and low ocular bioavailability are drawbacks of conventional ocular treatments. This requires frequent and long-term application of antiglaucoma drugs which in turn cause local side effects and are a major cause of therapeutic failure due to loss of persistence in using glaucoma therapy. In this study, a semisynthetic, biocompatible, oxidized sucrose crosslinker was developed and used in the formulation of chitosan-gelatin hydrogel for the sustained release of timolol to control ocular hypertension. The swelling properties of the hydrogel showed a strong relationship with the oxidized sucrose concentration. Mucoadhesive properties of the hydrogel were studied and the in vitro release profiles demonstrated that crosslinking with oxidized sucrose reduced the release rate of the entrapped timolol. The results of both in vitro and in vivo studies supported that the formulated hydrogel maintained the release and in turn the efficacy of timolol for a longer period of time compared to the conventional eye drops. This is expected to reduce the frequency of drug application onto the eye surface and in turn enhances patients' convenience. In conclusion, the developed formulation represents a promising platform for an effective and compliant treatment of ocular hypertension.

Pimpinella anisum essential oil nanoemulsions against Tribolium castaneum-insecticidal activity and mode of action.

The red flour beetle, Tribolium castaneum Herbst (Coleoptera: Tenebrionidae), is an economically important pest of stored products. As possible alternative to conventional insecticides for its management, plant essential oils have gained interest owing to their effectiveness and eco-friendly features. However, they also show some drawbacks, such as low stability, poor water solubility and diffusion, and limited persistence in the environment. A good strategy to overcome these disadvantages is represented by green nanotechnologies. Herein, we developed a nanoemulsion based on the essential oil from Pimpinella anisum L. (Apiaceae) containing 81.2% of (E)-anethole and evaluated its toxicity on T. castaneum adults and F1 progeny, as well as its morphological and histological impact. The aniseed oil nanoemulsion was characterized by the formation of a semi-solid interphase between oil and water; mean drop size was 198.9 nm, PDI was 0.303, zeta potential was - 25.4 ± 4.47 mV, and conductivity was 0.029 mS/cm. The nanoemulsion showed toxicity on T. castaneum (LC50 = 9.3% v/v), with a significant impact on its progeny. Morphological and histological damages triggered by feeding and exposure to the aniseed nanoemulsion were analyzed by scanning electron microscopy (SEM) and light microscopy. Overall, our findings showed that the development of nanoemulsions allows to improve the stability of P. anisum essential oil enhancing its efficacy against stored grain pests and contributing to reduce the use of harmful synthetic insecticides.

Effect of Chemical Binding of Doxorubicin Hydrochloride to Gold Nanoparticles, Versus Electrostatic Adsorption, on the In Vitro Drug Release and Cytotoxicity to Breast Cancer Cells.

PURPOSE: The selective delivery of chemotherapeutic agent to the affected area is mainly dependent on the mode of drug loading within the delivery system. This study aims to compare the physical method to the chemical method on the efficiency of loading DOX.HCl to GNPs and the specific release of the loaded drug at certain tissue. METHOD: Bifunctional polyethylene glycol with two different functionalities, the alkanethiol and the carboxyl group terminals, was synthesized. Then, DOX·HCl was covalently linked via hydrazone bond, a pH sensitive bond, to the carboxyl functional group and the produced polymer was used to prepare drug functionalized nanoparticles. Another group of GNPs was coated with carboxyl containing polymer; loading the drug into this system by the means of electrostatic adsorption. Finally, the prepared system were characterized with respect to size, shape and drug release in acetate buffer pH 5 and PBS pH 7.4 Also, the effect of DOX.HCl loaded systems on cell viability was assessed using MCF-7 breast cancer cell line. RESULTS: The prepared nanoparticles were spherical in shape, small in size and monodisperse. The release rate of the chemically bound drug in the acidic pH was higher than the electrostatically adsorbed one. Moreover, both systems show little release at pH 7.4. Finally, cytotoxicity profiles against human breast adenocarcinoma cell line (MCF-7) exhibited greater cytotoxicity of the chemically bound drug over the electrostatically adsorbed one. CONCLUSION: Chemical binding of DOX·HCl to the carboxyl group of PEG coating GNPs selectively delivers high amount of drug to tumour-affected tissue which leads to reducing the unwanted effects of the drug in the non-affected ones.

Mucosal co-delivery of ketorolac and lidocaine using polymeric wafers for dental application.

The current study aimed to investigate the effectiveness of a developed sodium alginate and polyvinylpyrrolidone K-25 (PVP K-25) polymeric wafer for the co-delivery of ketorolac and lidocaine to soft tissues for healing and pain control following gingivectomy. Nine ketorolac/lidocaine lyophilized wafers were formulated and assessed for their hydration capacity, mucoadhesion ability and in vitro release profile to select the optimum system for further clinical investigation. Wafer F6 containing 2:1 sodium alginate to PVP K-25 and 10% glycerol showed optimum properties and was selected for the clinical study. Twenty patients were included in the study and the ketorolac/lidocaine wafer was assessed versus a market product. Visual pain analog was evaluated daily for the first week and wound healing index was evaluated for one week, two weeks and one month following the procedure. The developed ketorolac/lidocaine polymeric wafer proved to be an effective method of reducing pain and discomfort together with enhancing wound healing following gingivectomy.

Heterobifunctional poly(ethylene glycol) derivatives for the surface modification of gold nanoparticles toward bone mineral targeting.

Heterobifunctional poly(ethylene glycol)s can be used for many biomedical applications ranging from solubility enhancement of hardly soluble compounds to surface modification of medical devices. In order to modify gold nanoparticles as model particles for drug targeting applications, PEG derivatives are synthesized that possess a high affinity for gold surfaces, namely a thioalkyl function, known to form stable monolayers on gold. Additionally a bisphosphonate function is introduced in the PEG molecule to allow targeting of hydroxyapatite rich tissues, like bone. Gold nanoparticles are modified using the synthesized bifunctional PEG and investigated for their stability in biological fluids and their ability to bind to hydroxyapatite granules in these fluids.