Diminishing Self-Discharge of High-Loading Li-S Batteries with Oxygen-rich Biomass Carbon Interlayers.

Lithium-sulfur batteries (Li-S) have possessed gratifying development in the past decade due to their high theoretical energy density. However, the severe polysulfide shuttling provokes undesirable self-discharge effect, leading to low energy efficiency in Li-S batteries. Herein, an interlayer composed of oxygen-rich carbon nanosheets (OCN) derived from bagasse is elaborated to suppress the shuttle effect and reduce the resultant self-discharge effect. The OCN interlayer is able to physically block the shuttling behavior of polysulfides and its oxygen-rich functional groups can strongly interact with polysulfides via O-S bonds to chemically immobilize mobile polysulfides. The self-discharge test for seven days further shows that the self-discahrge rate is diminished by impressive 93%. As a result, Li-S batteries with the OCN interlayer achieve an ultrahigh discharge specific capacity of 710 mAh g-1 at a high mass loading of 7.18 mg. The work provides a facile method for designing functional interlayers and opens a new avenue for realizing Li-S batteries with high energy efficiency.

8-hydroxyquinoline-N-oxide copper(II)- and zinc(II)-phenanthroline and bipyridine coordination compounds: Design, synthesis, structures, and antitumor evaluation.

Fourteen novel tumor-targeting copper(II) and zinc(II) complexes, [Cu(ONQ)(QD1)(NO3)]·CH3OH (NQ3), [Cu(ONQ)(QD2)(NO3)] (NQ2), [Cu(NQ)(QD2)Cl] (NQ3), [Cu(ONQ)(QD1)Cl] (NQ4), [Cu(ONQ)(QD3)](NO3) (NQ5), [Cu(ONQ)(QD3)Cl] (NQ6), [Zn(ONQ)(QD4)Cl] (NQ7), [Zn(ONQ)(QD1)Cl] (NQ8), [Zn(ONQ)(QD5)Cl] (NQ9), [Zn(ONQ)(QD2)Cl] (NQ10), [Zn(ONQ)(QD6)Cl] (NQ11), [Zn(ONQ)(QD7)Cl] (NQ12), and [Zn(ONQ)(QD3)Cl] (NQ13) supported on 8-hydroxyquinoline-N-oxide (H-ONQ), 2,2'-dipyridyl (QD1), 5,5'-dimethyl-2,2'-bipyridyl (QD2), 1,10-phenanthroline (QD3), 4,4'-dimethoxy-2,2'-bipyridyl (QD4), 4,4'-dimethyl-2,2'-bipyridyl (QD5), 5-chloro-1,10-phenanthroline (QD6), and bathophenanthroline (QD7), were first synthesized and characterized using various spectroscopic techniques. Furthermore, NQ1-NQ13 exhibited higher antiproliferative activity and selectivity for cisplatin-resistant SK-OV-3/DDP tumor cells (CiSK3) compared to normal HL-7702 cells based on results obtained from the cell counting Kit-8 (CCK-8) assay. The complexation of copper(II) ion with QD2 and ONQ ligands resulted in an evident increase in the antiproliferation of NQ1-NQ6, with NQ6 exhibiting the highest antitumor potency against CiSK3 cells compared to NQ1-NQ5, H-ONQ, QD1-QD7, and NQ7-NQ13 as well as the reference cisplatin drug with an IC50 value of 0.17 ± 0.05 µM. Mechanistic studies revealed that NQ4 and NQ6 induced apoptosis of CiSK3 cells via mitophagy pathway regulation and adenosine triphosphate (ATP) depletion. Further, the differential induction of mitophagy decreased in the order of NQ6 > NQ4, which can be attributed to the major impact of the QD3 ligand with a large planar geometry and the Cl leaving group within the NQ6 complex. In summary, these results confirmed that the newly synthesized H-ONQ copper(II) and zinc(II) coordination metal compounds NQ1-NQ13 exhibit potential as anticancer drugs for cisplatin-resistant ovarian CiSK3 cancer treatment.

Comparative Toxicity, Biodistribution and Excretion of Ultra-Small Gold Nanoclusters with Different Emission Wavelengths.

The exponentially increased use of gold nanoclusters in diagnosis and treatment has raised serious concern about their potential threat to living organisms. However, the mechanisms of toxicity of gold nanoclusters in vitro and in vivo remain poorly understood. In this work, comparative toxicity studies, including biodistribution and excretion, were carried out with mildly and chemically synthesized ultra-small L-histidine-protected and bovine serum albumin (BSA)-protected gold nanoclusters in an all-aqueous process. These nanoclusters did not induce a remarkable impact on cell viability, even at relatively high concentrations (100 µg/mL). The haemolytic assay demonstrated that the gold nanoclusters could not destroy blood cell at 600 µg/mL. After intravenous injection with mice, the biocompatibility, biodistribution, and excretion were determined. Quantitative analysis results showed that accumulation varied in the liver, spleen, kidney, and lung, though primarily in the liver and spleen. They were excreted in urine and faeces, but mainly excreted through urine. In our study, no obvious abnormalities were found in body weight, behavioral changes, blood and serum biochemical indicators, and histopathology. These findings suggested that both gold nanoclusters showed similar effects in vivo and were safe and biocompatible, laying the foundation for safe biomedical application in the future.

Powerful antibacterial activity of graphene/nanoflower-like nickelous hydroxide nanocomposites.

AIM: The development of new and efficient antibacterial agents is urgent to overcome emerging antimicrobial resistance. MATERIALS & METHODS: Herein, we have presented a new type of 3D antibacterial system to prompt bacteria to contact with the any plane of nanocomposites. RESULTS: Comparing the antibacterial activity of graphene oxide, reduced graphene oxide and graphene-loaded nanoflower-like nickelous hydroxide (GN/Ni(OH)2) nanocomposites; the GN/Ni(OH)2 showed stronger bactericidal capability toward Gram-negative/-positive bacteria. Moreover, the GN/Ni(OH)2 with low cytotoxicity can promote it as 'green' antimicrobial agents. And, the GN/Ni(OH)2 presented long-term stable antibacterial effectiveness after 2-month storage. The antibacterial mechanisms of GN/Ni(OH)2 were evidenced as the 3D contact and violent damage to the bacterial structure. CONCLUSION: The GN/Ni(OH)2 provides new insights into the antibacterial properties of 3D nanocomposites for effectively fighting pathogen threats in biomedicine and public health.

Room temperature ionic liquids enhanced the speciation of Cr(VI) and Cr(III) by hollow fiber liquid phase microextraction combined with flame atomic absorption spectrometry.

A new method for the speciation of Cr(VI) and Cr(III) based on enhancement effect of room temperature ionic liquids (RTILs) for hollow fiber liquid phase microextraction (HF-LPME) combined with flame atomic absorption spectrometry (FAAS) was developed. Room temperature ionic liquids (RTILs) and diethyldithiocarbamate (DDTC) were used enhancement reagents and chelating reagent, respectively. The addition of room temperature ionic liquids led to 3.5 times improvement in the determination of Cr(VI). In this method, Cr(VI) reacts with DDTC yielding a hydrophobic complex, which is subsequently extracted into the lumen of hollow fiber, whereas Cr(III) is remained in aqueous solutions. The extraction organic phase was injected into FAAS for the determination of Cr(VI). Total Cr concentration was determined after oxidizing Cr(III) to Cr(VI) in the presence of KMnO(4) and using the extraction procedure mentioned above. Cr(III) was calculated by subtracting of Cr(VI) from the total Cr. Under optimized conditions, a detection limit of 0.7 ng mL(-1) and an enrichment factor of 175 were achieved. The relative standard deviation (RSD) was 4.9% for Cr(VI) (40 ng mL(-1), n=5). The proposed method was successfully applied to the speciation of chromium in natural water samples with satisfactory results.

Synergistic enhancement effect of room temperature ionic liquids for cloud point extraction combined with UV-vis spectrophotometric determination nickel in environmental samples.

A new method based on enhancement effect of room temperature ionic liquids for cloud point extraction trace amounts of nickel combined with UV-vis spectrophotometric determination was developed. Room temperature ionic liquids (RTILs) and diethyldithiocarbamate (DDTC) were used enhancement reagent and chelating reagent, respectively. The addition of room temperature ionic liquids leads to 3.0 times improvement in the determination of nickel. The nonionic surfactant Triton X-100 was used as the extractant. When the temperature of the system was higher than the cloud point of Triton X-100, Ni-DTC complex was extracted into Triton X-100 and separation of the analyte from the matrix was achieved. Some parameters that influenced cloud point extraction and subsequent determination were evaluated in detail, such as the concentrations of RTILs, DDTC and Triton X-100; pH of sample solution, as well as interferences. Under optimized conditions, an enrichment factor of 72 could be obtained, and the detection limit (LOD) for Ni was 0.5ng mL(-1). Relative standard deviations for five replicate determinations of the standard solution containing 50ng mL(-1) Ni was 3.9%. The proposed method was successfully applied to the determination of nickel in certified reference materials with satisfactory results.

[Speciation of iron using capillary electrophoresis inductively coupled plasma atomic emission spectrometry].

The separation of iron species, e. g. Fe2+ -Fe3+, Fe2+ -Fe(phen)3(2+), and Fe2+ -Fe3+, by mixing with complexing reagents of o-phenanthroline and EDTA, and Fe2+ -Fe3+ with o-phenanthroline was developed by capillary electrophoresis inductively coupled plasma atomic emission spectronetry (CE-ICP-AES). The effects of electrophoresis conditions such as voltage, buffer solution pH, and complex concentration on iron species are discussed. Satisfactory separation conditions for iron speciation have been acquired. Cations and anions, containing complexing agents, do not interfere in the separation of iron species. The method has advantage to CE-UV.