ABSTRACT
BACKGROUND: Information on fracture biomechanics has implications in materials research and clinical practice. The aim of this study was to analyse the influence of non-carious cervical lesion (NCCL) size, restorative status and direction of occlusal loading on the biomechanical behaviour of mandibular premolars, using finite element analysis (FEA), strain gauge tests and fracture resistance tests. METHODS: Ten buccal cusps were loaded on the outer and inner slopes to calculate the strain generated cervically. Data were collected for healthy teeth at baseline and progressively at three lesion depths (0.5 mm, 1.0 mm and 1.5 mm), followed by restoration with resin composite. The magnitude and distribution of von Mises stress and maximum principal stress were simulated at all stages using FEA, and fracture strength was also determined (n = 7 per group). RESULTS: There were significant effects of the lesion size and loading directions on stress, strain and fracture resistance (p < 0.05). Fracture resistance values decreased with increase in lesion size, but returned to baseline with restorations. CONCLUSIONS: Combined assessment of computer-based and experimental techniques provide an holistic approach to characterize the biomechanical behaviour of teeth with both unrestored and restored NCCLs.
Subject(s)
Bicuspid/physiology , Mandible , Tooth Cervix/physiology , Tooth Fractures/surgery , Adult , Biomechanical Phenomena , Composite Resins , Dental Restoration, Permanent/methods , Dental Stress Analysis/methods , Finite Element Analysis , HumansABSTRACT
BACKGROUND: The present study analysed the effects of different occlusal loading on premolars displaying various non-carious cervical lesions morphologies, restored (or not) with composites, by 3D finite element analysis. METHODS: A three-dimensional digital model of a maxillary premolar was generated using CAD software. Three non-carious cervical lesions morphological types were simulated: wedged-shaped, saucer and mixed. All virtual models underwent three loading types (100 N): vertical, buccal and palatal loading. The simulated non-carious cervical lesions morphologies were analysed with and without restorations to consider specific regions, such as the occlusal and gingival walls as well as the depth of the lesions. Data summarizing the stress distribution were obtained in MPa using Maximum Principal Stress. RESULTS: Palatal loads were responsible for providing the highest values of accumulated tensile stress on the buccal wall; 27.66 MPa and 25.76 MPa for mixed and wedged-shaped morphologies, respectively. The highest tensile values found on non-carious cervical lesions morphologies restored with composite resin were 5.9 MPa in the mixed morphology, similar to those found on sound models despite their morphologies and occlusal loading. CONCLUSIONS: The various non-carious cervical lesions morphologies had little effect on stress distribution patterns, whereas the loading type and presence of composite restorations influenced the biomechanical behaviour of the maxillary premolars.
Subject(s)
Bite Force , Composite Resins/chemistry , Dental Restoration, Permanent/methods , Finite Element Analysis , Imaging, Three-Dimensional/methods , Tooth Cervix/physiopathology , Tooth Wear/physiopathology , Bicuspid/physiopathology , Biomechanical Phenomena , Dental Stress Analysis/methods , Elastic Modulus , Humans , Maxilla , Models, Anatomic , Models, Biological , Stress, Mechanical , Tensile Strength , User-Computer InterfaceABSTRACT
The aim of this study was to investigate the biomechanical behaviour of maxillary premolar teeth regarding root morphology and abfraction depth, submitted to axial and oblique occlusal load. The investigation was conducted using 3D finite element analysis and strain gauge test. Sound maxillary premolar single and double root were selected for 3D model generation. The teeth were scanned for external morphology data acquisition. The 3D geometry was stored in *.STL and exported to Bio-CAD software (Rhinoceros-3D) to model generation. Mesh generation, mechanical properties and boundary conditions were performed in finite element software (Femap, Noran Engineering, USA). Twelve models were generated: sound tooth, 1.25 and 2.5 mm abfraction teeth. 100N compressive static load was applied: axially and 45° angle to the long axis on the palatine surface of the buccal cusp. Two strain gauges were bonded on the teeth mounted in a mechanical testing machine. Von Mises criterion showed that the double-root teeth associated with 2.5 mm abfraction and oblique loading presented higher stress values. Axial loading associated with single-root teeth propitiated the lowest stress rates. Double root sound 1.25 and 2.5 mm abfraction teeth associated with oblique loading showed the highest strain values (µS): 692.6, 1043.31 and 1236.14, respectively. Single root sound 1.25 and 2.5 mm abfraction teeth associated with oblique loading showed 467.10, 401.51 and 420.98 strain values, respectively. Axial loading showed lower strain rates, ranging from 136.12 to 366.91. The association of deep lesions, oblique loading and double-root tooth promoted higher stress and strain concentration.
