Statistical Design and Optimization of Cr (VI) Adsorption onto Native and HNO3/NaOH Activated Cedar Sawdust Using AAS and a Response Surface Methodology (RSM).

The removal of heavy metals from wastewater has become the subject of considerable interest at present. Thus, the use of novel adsorbents that are highly efficient is of critical importance for the removal of Cr (VI) ions from aqueous media. The adsorption of Cr (VI) ions from aqueous solutions by a new adsorbent, cedar wood sawdust, and the optimization of its adsorption parameters, were investigated in this study. Cedar wood sawdust was used in its native and HNO3/NaOH chemically modified forms as new low-cost sorbents to remove Cr (VI) ions from aqueous solutions in a batch system. The adsorption conditions were analyzed via response surface methodology. The RSM results showed that the optimal adsorption conditions yielding the best response were an adsorbent mass of 2 g for native Cedar and 1.125 g for its activated form, a metal concentration of 150 mg/L for native Cedar and 250 mg/L for activated, a temperature of 50 °C, a pH of 1, and a contact time of 67.5 min. At optimum adsorption conditions, the maximum adsorption capacities and the adsorption yields were 23.64 mg/g and 84% for native Cedar and 48.31 mg/g and 99% for activated Cedar, respectively.

Lignocellulosic Nanocrystals from Sawmill Waste as Biotemplates for Free-Surfactant Synthesis of Photocatalytically Active Porous Silica.

This work presents a new approach for more effective valorization of sawmill wastes (Beech and Cedar sawdusts), which were used as new sources for the extraction of lignin-containing and lignin-free cellulose II nanocrystals (L-CNCs and CNCs). It was shown that the properties of the extracted nanocrystals depend on the nature of the used sawdust (softwood or hardwood sawdusts). L-CNCs and CNCs derived from Beech fibers were long and thin and also had a higher crystallinity, compared with those obtained from Cedar fibers. Thanks to their interesting characteristics and their high crystallinity, these nanocrystals have been used without changing their surfaces as template cores for nanostructured hollow silica-free-surfactant synthesis for photocatalysis to degrade methylene blue (MB) dye. The synthesis was performed with a simple and efficient sol-gel method using tetraethyl orthosilicate as the silica precursor followed by calcination at 650 °C. The obtained materials were denoted as B/L-CNC/nanoSiO2, B/CNC/nanoSiO2, C/L-CNC/nanoSiO2, and C/CNC/nanoSiO2, when the used L-CNC and CNC cores are from Beech and Cedar, respectively. By comprehensive analysis, it was demonstrated that the nanostructured silica were quite uniform and had a similar morphology as the templates. Also, the pore sizes were closely related to the dimensions of L-CNC and CNC templates, with high specific surface areas. The photocatalytic degradation of MB dye was about 94, 98, 74, and 81% for B/L-CNC/nanoSiO2, B/CNC/nanoSiO2, C/L-CNC/nanoSiO2, and C/CNC/nanoSiO2, respectively. This study provides a simple route to extract L-CNCs and CNCs as organic templates to prepare nanostructured silica. The different silica structures showed excellent photodegradation of MB.

Evaluation of softwood and hardwood sawmill wastes impact on the common carp "Cyprinus carpio" and its aquatic environment: An oxidative stress study.

The aquatic pollution due to sawmill wood wastes constitutes a major threat to hydro-chemical and fauna characteristics of the aquatic ecosystems. When this kind of organics wastes enter aquatic environment it can be taken up by aquatic organisms through respiration and/or through their diet. This could concurrently result in oxidative stress and later having adverse effect on physiological and biochemical function. The importance of fish in the society cannot be over emphasized, hence there is the need to know the influence of sawmill wood wastes on the water quality and fish. Therefore, this work aims to study the impact of five species of wood wastes on a type of fish named common carp (Cyprinus carpio) known as the most widely cultured fish species in the world and on its aquatic environment. The monitoring of water parameters showed deterioration in water quality. The activities of superoxide dismutase (SOD), Catalase (CAT), glutathione peroxidase (GPx) and lipid peroxidation (MDA) were investigated to evaluate the degree of oxidative stress. According to t-student, there was a significant difference compared to control (P < 0.05) in the level of SOD, CAT, GPx and MDA activities in fish exposed to 5 g·l-1 of each sawdust except for GPx, a non-significant difference (p > 0.05) was noted in the case of Beech and Dibetou. When the dispersed amount was about 0.375 g·l-1 we noted a significant difference in the level of SOD and GPx, except for GPx a non-significant difference was detected in the case of Cedar. The level of CAT was significantly difference just in the case of Cedar and Dibetou and that of MDA was significantly difference just in the case of Beech and Mahogany. We conclude therefore that sawmill wood waste not only impact the water quality adversely but also alters the levels of different enzymes activities in Cyprinus Carpio fish by the inhibition of SOD, CAT and GPx activities and by the production of MDA, which reflects response to oxidative stress. This study provides a rational use of these enzymes as suitable biomarkers with different degrees of specificity and as important tool for environmental monitoring.