Indium Tin Oxide Induced Internal Positive Feedback and Indium Ion Transport in Perovskite Solar Cells.

Stability is the most pressing challenge hindering the commercialization of perovskite solar cells (PSCs), and previous efforts focused more on enhancing the resistance of PSCs to external stimulus. Here, we found that the indium tin oxide (ITO) will deteriorate the photovoltaic performance of PSCs through positive feedback cycles. Specifically, the perovskite degradation products will cross the electron transport layer to chemically etch the electrode ITO to generate In3+, which will migrate upwards into the perovskite film. Then, the reaction that corrodes ITO consumes the decomposition products of perovskite and shifts the balance of the perovskite decomposition reaction, further promoting the degradation and thus falling into a positive feedback cycle. Moreover, the In3+ in the perovskite film was found to accumulate at the upper surface, which would lead to n-type doping of perovskite film to form the energy barrier for interface carrier extraction. Subsequently, the chelating molecule ethylenediaminetetraacetic acid disodium salt (EDTA-2Na) was introduced onto ITO to firmly chelate the In3+ and prevent it from migrating upward, thus breaking this internal positive feedback cycle and significantly enhancing the efficiency and stability of PSCs. This work provides new perspectives for understanding the mechanism of photovoltaic performance loss and ionic transport in PSCs.

Colloidal CsBr Nanocrystals Triggered Inorganic Cation and Anion Exchange Enables High-Performance Perovskite Solar Cells.

Achieving longitudinal doping of specific ions by surface treatment remains a challenge for perovskite solar cells, which are often limited by dopant and solvent compatibility. Here, with the flowing environment created by CsBr colloidal nanocrystals, ion exchange is induced on the surface of the perovskite film to enable the homogeneous distribution of Cs+ and gradient distribution of Br- simultaneously at whole depth of the film. Meanwhile, assisted by long-chain organic ligands, the excess PbI2 on the surface of perovskite film is converted to a more stable quasi-2D perovskite, which realizes effective passivation of defects on the surface. As a result, the unfavorable n-type doping on the top surface is suppressed, so that the energy level alignment between perovskite and hole transport layer is optimized. On the basis of co-modification of the surface and the bulk, the PCE of champion device reaches 23.22% with enhanced VOC of 1.12 V. Device maintains 97.12% of the initial PCE in dark ambient air at 1% RH after 1056 h without encapsulation, and 91.56% of the initial PCE under light illumination of 1 sun in N2 atmosphere for more than 200 h. The approach demonstrated here provides an effective strategy for the nondestructive introduction of inorganic ions in perovskite film.