Dissolution Mechanisms of Amorphous Solid Dispersions: Application of Ternary Phase Diagrams To Explain Release Behavior.

The use of amorphous solid dispersions (ASDs) in commercial drug products has increased in recent years due to the large number of poorly soluble drugs in the pharmaceutical pipeline. However, the release behavior of ASDs is complex and remains not well understood. Often, the drug release from ASDs is rapid and complete at lower drug loadings (DLs) but becomes slow and incomplete at higher DLs. The DL where release becomes hindered is termed the limit of congruency (LoC). Currently, there are no approaches to predict the LoC. However, recent findings show that one potential cause leading to the LoC is a change in phase morphology after water-induced phase separation at the ASD/solution interface. In this study, the phase behavior of ASDs in contact with aqueous solutions was described thermodynamically by constructing experimental and computational ternary phase diagrams, and these were used to predict morphology changes and ultimately the LoC. Experimental ternary phase diagrams were obtained by equilibrating ASD/water mixtures over time. Computational ternary phase diagrams were obtained by Perturbed Chain Statistical Associating Fluid Theory (PC-SAFT). The morphology of the hydrophobic phase was studied with fluorescence confocal microscopy. It was demonstrated that critical point (plait point) composition approximately corresponded to the ASD DL, where the hydrophobic phase, formed during phase separation, became interconnected and hindered ASD release. This work provides mechanistic insights into the ASD release behavior and highlights the potential of in silico ASD design using phase diagrams.

Drug Release from Surfactant-Containing Amorphous Solid Dispersions: Mechanism and Role of Surfactant in Release Enhancement.

PURPOSE: To understand how surfactants affect drug release from ternary amorphous solid dispersions (ASDs), and to investigate different mechanisms of release enhancement. METHODS: Ternary ASDs containing ritonavir (RTV), polyvinylpyrrolidone/vinyl acetate (PVPVA) and a surfactant (sodium dodecyl sulfate (SDS), Tween 80, Span 20 or Span 85) were prepared with rotary evaporation. Release profiles of ternary ASDs were measured with surface normalized dissolution. Phase separation morphologies of ASD compacts during hydration/dissolution were examined in real-time with a newly developed confocal fluorescence microscopy method. The water ingress rate of different formulations was measured with dynamic vapor sorption. Microscopy was employed to check for matrix crystallization during release studies. RESULTS: All surfactants improved drug release at 30% DL, while only SDS and Tween 80 improved drug release at higher DLs, although SDS promoted matrix crystallization. The dissolution rate of neat polymer increased when SDS and Tween 80 were present. The water ingress rate also increased in the presence of all surfactants. Surfactant-incorporation affected both the kinetic and thermodynamics factors governing phase separation of RTV-PVPVA-water system, modifying the phase morphology during ASD dissolution. Importantly, SDS increased the miscibility of RTV-PVPVA-water system, whereas other surfactants mainly affected the phase separation kinetics/drug-rich barrier persistence. CONCLUSION: Incorporation of surfactants enhanced drug release from RTV-PVPVA ASDs compared to the binary system. Increased drug-polymer-water miscibility and disruption of the drug-rich barrier at the gel-solvent interface via plasticization are highlighted as two key mechanisms underlying surfactant impacts based on direct visualization of the phase separation process upon hydration and release.

Release Enhancement by Plasticizer Inclusion for Amorphous Solid Dispersions Containing High Tg Drugs.

PURPOSE: Plasticizers are commonly used in the preparation of amorphous solid dispersions (ASDs) with the main goal of aiding processability; however, to the best of our knowledge, the impact of plasticizers on drug release has not been explored. The goal of this study was to evaluate diverse plasticizers, including glycerol and citrate derivatives, as additives to increase the drug loading where good drug release could be achieved from copovidone (PVPVA)-based dispersions, focusing on high glass transition (Tg) drugs, atazanavir (ATZ) and ledipasvir (LED). METHODS: ASDs were prepared using the high Tg compounds, atazanavir (ATZ) and ledipasvir (LED), as model drugs. Release was evaluated using surface normalized dissolution testing. Differential scanning calorimetry was used to measure glass transition temperature and water vapor sorption was performed on select samples. RESULTS: The presence of a plasticizer at 5% w/w for ATZ and 10% w/w for LED ASDs, led to improved drug release. For ATZ ASDs, in the absence of plasticizer, release was very poor at drug loadings of 10% w/w and above. Good release was obtained for plasticized ASDs up to a drug loading of 25%. The corresponding improvement for LED was from 5 to 20% DL. Interestingly, for a low Tg compound, ritonavir, relatively smaller improvements in release as a function of drug loading were achieved through plasticizer incorporation. CONCLUSIONS: The use of plasticizers represents a potential new strategy to increase drug loading in ASDs for high Tg compounds with a low tendency to crystallize and may help improve a major limitation of ASD formulations, namely the high excipient burden.

Dissolution Mechanisms of Amorphous Solid Dispersions: A Close Look at the Dissolution Interface.

Despite the recent success of amorphous solid dispersions (ASDs) at enabling the delivery of poorly soluble small molecule drugs, ASD-based dosage forms are limited by low drug loading. This is partially due to a sharp decline in drug release from the ASD at drug loadings surpassing the 'limit of congruency' (LoC). In some cases, the LoC is as low as 5% drug loading, significantly increasing the risk of pill burden. Despite efforts to understand the mechanism responsible for the LoC, a clear picture of the molecular processes occurring at the ASD/solution interface remains elusive. In this study, the ASD/solution interface was studied for two model compounds formulated as ASDs with copovidone. The evolution of a gel layer and its phase behavior was captured in situ with fluorescence confocal microscopy, where fluorescent probes were added to label the hydrophobic and hydrophilic phases. Phase separation was detected in the gel layer for most of the ASDs. The morphology of the hydrophobic phase was found to correlate with the release behavior, where a discrete phase resulted in good release and a continuous phase formed a barrier leading to poor release. The continuous phase formed at a lower drug loading for the system with stronger drug-polymer interactions. This was due to incorporation of the polymer into the hydrophobic phase. The study highlights the complex molecular and phase behavior at the ASD/solution interface of copovidone-based ASDs and provides a thermodynamic argument for qualitatively predicting the release behavior based on drug-polymer interactions.

Impact of Crystal Nuclei on Dissolution of Amorphous Drugs.

Amorphous drugs are used to improve bioavailability of poorly water-soluble drugs. Crystallization must be managed to take full advantage of this formulation strategy. Crystallization of amorphous drugs proceeds in a sequence of crystal nucleation and growth, with different kinetics. At low temperatures, crystal nucleation is fast, but crystal growth is slow. Therefore, amorphous drugs may generate dense but nanoscale crystal nuclei. Such tiny nuclei cannot be detected using routine powder X-ray diffraction (PXRD) and polarized light microscopy (PLM). However, they may negate the dissolution advantage of amorphous drugs. In this work, for the first time, the impact of crystal nuclei on dissolution of amorphous drugs was studied by monitoring the real-time dissolution from amorphous drug films, with and without crystal nuclei, and the evolving crystallinity in the films. Three model drugs (ritonavir/RTV, posaconazole/POS, and nifedipine/NIF) were chosen to represent different crystallization tendencies in the supercooled liquid state, namely, slow-nucleation-and-slow-growth (SN-SG), fast-nucleation-and-slow-growth (FN-SG), and fast-nucleation-and-fast-growth (FN-FG), respectively. We find that although the amorphous films containing nuclei do not show obvious differences from the nuclei-free films under PLM and PXRD before dissolution, they have inferior dissolution performance relative to the nuclei-free amorphous films. For SN-SG drug RTV, crystal nuclei have negligible impact on the crystallization of amorphous films, dissolution rate, and supersaturation achieved. However, they cause earlier de-supersaturation by inducing crystallization in solution as heterogeneous seeds. For FN-SG drug POS and FN-FG drug NIF, crystal nuclei accelerate crystallization in the amorphous films leading to lower supersaturation achieved with POS, and elimination of any supersaturation with NIF. Dissolution profiles of amorphous films can be further analyzed using a derivative function of the apparent dissolution rate, which yields amorphous solubility, initial intrinsic dissolution rate, and onset of crystallization in the amorphous films. This study highlights that although crystal nuclei are undetectable with routine analytical methods, they can significantly negate, or even eliminate, the dissolution advantage of amorphous drugs. Hence, understanding crystal nucleation process and developing approaches to prevent it are necessary to fully realize the benefits of amorphous solids.

Inhibiting Sublimation of Thymol by Cocrystallization.

A thymol:4,4'-dipyridyl (2:1) cocrystal (Form I) is reported to suppress thymol sublimation. The cocrystal was prepared via solution-mediated phase transformation and its structure is sustained by O-H (phenol) ··· N (pyridyl) hydrogen bonds between two individual components. A cocrystal polymorph (Form II) was formed via solid state transformation or via vapor phase upon heating. Using gravimetry analysis, it was demonstrated that cocrystal Form I decreased the sublimation rate of thymol by 38-fold. This study demonstrates that cocrystallization is an effective approach to reduce vapor pressure and sublimation of solids, thus achieving odor-masking.

Release Mechanisms of Amorphous Solid Dispersions: Role of Drug-Polymer Phase Separation and Morphology.

Formulating poorly soluble molecules as amorphous solid dispersions (ASDs) is an effective strategy to improve drug release. However, drug release rate and extent tend to rapidly diminish with increasing drug loading (DL). The poor release at high DLs has been postulated to be linked to the process of amorphous-amorphous phase separation (AAPS), although the exact connection between phase separation and release properties remains somewhat unclear. Herein, release profiles of ASDs formulated with ritonavir (RTV) and polyvinylpyrrolidone/vinyl acetate (PVPVA) at different DLs were determined using surface normalized dissolution. Surface morphologies of partially dissolved ASD compacts were evaluated with confocal fluorescence microscopy, using Nile red and Alexa Fluor 488 as fluorescence markers to track the hydrophobic and hydrophilic phases respectively. ASD phase behavior during hydration and release of components were also visualized in real time using a newly developed in situ confocal fluorescence microscopy method. RTV-PVPVA ASDs showed complete and rapid drug release below 30% DL, partial drug release at 30% DL and no drug release above 30% DL. It was observed that formation of discrete drug-rich droplets at lower DLs led to rapid and congruent release of both drug and polymer, whereas formation of continuous drug-rich phase at the ASD matrix-solution interface was the cause of poor release above certain DLs. Thus, the domain size and interconnectivity of phase separated drug-rich domains appear to be critical factors impacting drug release from RTV-PVPVPA ASDs.

Detecting Crystallinity in Amorphous Solid Dispersions Using Dissolution Testing: Considerations on Properties of Drug Substance, Drug Product, and Selection of Dissolution Media.

Dissolution testing has long been used to monitor product quality. Its role in quality control of amorphous solid dispersion (ASD) formulations is relatively new. In the presence of the crystalline phase, the dissolution of ASDs is determined by the dynamics between the dissolution rate of the amorphous solids and the rate of crystal growth. The detection of crystalline phase by dissolution test has not been well understood in the context of drug properties, formulation characteristics and dissolution test variables. This study systematically evaluated the impact of key parameters such as intrinsic crystallization tendency of the API, drug loading, extent of dissolution sink conditions and level of crystallinity on the ASD dissolution behavior. The results indicated diverse dissolution behaviors due to the differences in the intrinsic crystallization propensity of the drug, the drug loading, the ASD polymers and the dissolution sink index. Each of the complex dissolution profiles were interpreted based on visual observations during dissolution, the appropriate sink index based on the amorphous solubility, and the competition between drug dissolution versus crystallization. The findings of this study provide insights towards the various considerations that should be taken into account towards rationally developing a discriminatory dissolution method.

Dissolution Mechanisms of Amorphous Solid Dispersions: Role of Drug Load and Molecular Interactions.

High drug load amorphous solid dispersions (ASDs) have been a challenge to formulate partially because drug release is inhibited at high drug loads. The maximum drug load prior to inhibition of release has been termed the limit of congruency (LoC) and has been most widely studied for copovidone (PVPVA)-based ASDs. The terminology was derived from the observation that below LoC, the polymer controlled the kinetics and the drug and the polymer released congruently, while above LoC, the release rates diverged and were impaired. Recent studies show a correlation between the LoC value and drug-polymer interaction strength, where a lower LoC was observed for systems with stronger interactions. The aim of this study was to investigate the causality between drug-PVPVA interaction strength and LoC. Four chemical analogues with diverse abilities to interact with PVPVA were used as model drugs. The distribution of the polymer between the dilute aqueous phase and the insoluble nanoparticles containing drug was studied with solution nuclear magnetic resonance spectroscopy and traditional separation techniques to understand the thermodynamics of the systems in a dilute environment. Polymer diffusion to and from ASD particles suspended in aqueous solution was monitored for drug loads above the LoC to investigate the thermodynamic driving force for polymer release. The surface composition of ASD compacts before and after exposure to buffer was studied with Fourier transform infrared spectroscopy to capture potential kinetic barriers to release. It was found that ASD compacts with drug loads above the LoC formed an insoluble barrier on the surface that was in pseudo-equilibrium with the aqueous phase and prevented further release of drugs and polymers during dissolution. The insoluble barrier contained a substantial amount of the polymer for the strongly interacting drug-polymer systems. In contrast, a negligible amount was found for the weakly interacting systems. This observation provides an explanation for the ability of strongly interacting systems to form an insoluble barrier at lower drug loads. The study highlights the importance of thermodynamic and kinetic factors on the dissolution behavior of ASDs and provides a potential framework for maximizing the drug load in ASDs.

Professor Raj Suryanarayanan: Scientist, Educator, Mentor, Family Man and Giant in Pharmaceutical Research.

This special edition of the Journal of Pharmaceutical Sciences is dedicated to Professor Raj Suryanarayanan (Professor and William & Mildred Peters Endowed Chair, University of Minnesota, School of Pharmacy) and honors his extensive and distinguished career as a scientist, educator and mentor. The goal of this commentary is to provide an overview of Professor Suryanarayanan's noteworthy career path and summarize his key research contributions. The commentary concludes with the personal summaries by guest editors.

Ritonavir Form III: A New Polymorph After 24 Years.

Polymorphism occurs widely in pharmaceutical solids, and must be thoroughly studied during product development. Twenty-four years after ritonavir (RTV) Form II materialized, we report a new polymorph, Form III, discovered via melt crystallization. Form III has a unique PXRD pattern, Raman spectrum, lower melting point and heat of fusion, compared to the known polymorphs, Form I and Form II. It is the least stable form, monotropically, among the three polymorphs. Form III differs from Form I and Form II in molecular conformation and hydrogen bonding motifs in crystal lattice. Nucleation from RTV supercooled liquid is slow, and selected Form III exclusively. The discovery of RTV Form III demonstrates the importance of crystal nucleation studies. Crystallization from supercooled liquids should be incorporated as part of polymorph screening workflow.

Surface-enhanced crystal nucleation and polymorph selection in amorphous posaconazole.

Molecules at a liquid/vapor interface have different organizations and mobilities from those in the bulk. These differences potentially influence the rate of crystal nucleation, but the effect remains imperfectly understood. We have measured the crystal nucleation rates at the surface and in the bulk of amorphous poscaconazole, a rod-like molecule known to have a preferred interfacial orientation. We find that surface nucleation is vastly enhanced over bulk nucleation, by ∼9 orders of magnitude, and selects a different polymorph (II) from bulk nucleation (I). This phenomenon mirrors the recently reported case of D-arabitol and stems from the similarity of anisotropic surface molecular packing to the structure of the surface-nucleating polymorph. In contrast to these two systems, the surface enhancement of nucleation is weaker (though still significant) in acetaminophen and in water and does not select a different polymorph. Together, the systems investigated to date all feature surface enhancement, not suppression, of crystal nucleation, and those showing a polymorphic change feature (1) structural reconstruction at the surface relative to the bulk and (2) existence of a different polymorph that can take advantage of the surface environment to nucleate. These results help predict the effect of a liquid/vapor interface on crystal nucleation and polymorph selection, especially in systems with a large surface/volume ratio, such as atmospheric water and amorphous particles.

Role of surfactants in improving release from higher drug loading amorphous solid dispersions.

Amorphous solid dispersion formulations (ASD) are increasingly being used as a formulation strategy to improve bioavailability of poorly soluble drugs. One of the limitations of ASDs, in particular for high glass transition temperature (Tg) compounds, is the drug loading threshold (termed the limit of congruency, LoC) below which rapid, complete and congruent release of drug and polymer is achieved. In this study, several ionic and non-ionic surfactants were added to atazanavir-copovidone ASDs with the main goal of increasing the limit of congruency. Atazanavir (ATZ) is a relatively high Tg compound with a LoC of 5 % drug loading (DL). Surface normalized dissolution studies revealed that addition of 5 % w/w of surfactant, sodium dodecyl sulfate (SDS) or cetrimonium bromide (CTAB), to the binary copovidone-based ASD doubled the LoC (from 5 to 10 % DL), resulting in a more than 30-fold increase in total release compared to the corresponding binary ASD. Moreover, addition of 5 % of Span®80 increased the LoC to 15 % DL. ASD Tg was found to decrease upon addition of surfactants and water sorption extent was found to increase. We speculate that surfactants act as plasticizers, which may facilitate polymer release from ASDs containing a high Tg drug, providing a possible explanation for the observed enhancement in drug release from ternary ASDs and the increase in LoC.

Anisotropic Molecular Organization at a Liquid/Vapor Interface Promotes Crystal Nucleation with Polymorph Selection.

The molecules at the surface of a liquid have different organization and dynamics from those in the bulk, potentially altering the rate of crystal nucleation and polymorphic selection, but this effect remains poorly understood. Here we demonstrate that nucleation at the surface of a pure liquid, d-arabitol, is vastly enhanced, by 12 orders of magnitude, and selects a different polymorph. The surface effect intensifies with cooling and can be inhibited by a dilute, surface-active second component. This phenomenon arises from the anisotropic molecular packing at the interface and its similarity to the surface-nucleating polymorph. Our finding is relevant for controlling the crystallization and polymorphism in any system with a significant interface such as nanodroplets and atmospheric water.

Phase separation in surfactant-containing amorphous solid dispersions: Orthogonal analytical methods to probe the effects of surfactants on morphology and phase composition.

Amorphous-amorphous phase separation (AAPS) is an important phase transition process for amorphous solid dispersion (ASD) performance both in terms of drug release as well as physical and chemical stability during storage. Addition of surfactants to ASD systems can impact both of these processes. One possible mechanism through which surfactants affect ASD performance is via their impact on AAPS. Unfortunately, despite their increasing usage in ASD formulations, the effect of surfactant on AAPS is still poorly understood, and there are limited analytical techniques that provide microstructural and composition information about phase separated ASDs. In this study, the impact of four surfactants (sodium dodecyl sulfate, Tween 80, Span 20 and Span 85) on water-induced phase separation in ASDs formulated with ritonavir and polyvinylpyrrolidone/vinyl acetate (PVPVA) was investigated using a variety of orthogonal analytical methods. Transparent films of ASDs with different compositions were prepared by spin coating. Fluorescence confocal microscopy in combination with an in situ humidity chamber was used to monitor the kinetics and morphology of phase separation following exposure to high relative humidity. Optical photothermal IR analysis of phase separated films enabled characterization of domain composition and surfactant distribution. Liquid-liquid phase separation concentration, zeta potential and solution nuclear magnetic resonance spectroscopy measurements enabled interpretation of interaction with and partition of surfactants into the drug-rich phase. It was found that phase separation kinetics and morphology were notably changed by the surfactants. Further, the surfactants showed different affinities for the drug-rich versus the aqueous/polymer-rich phases. The employed analytical techniques were found to be complementary in providing insight into surfactant location in phase separated systems. This study highlights the complexity of phase separation, especially in the presence of surfactants, and provides a foundation to understand the impact of AAPS on ASD performance.

Polymorphic selectivity in crystal nucleation.

Crystal nucleation rates have been measured in the supercooled melts of two richly polymorphic glass-forming liquids: ROY and nifedipine (NIF). ROY or 5-methyl-2-[(2-nitrophenyl)amino]-3-thiophenecarbonitrile is known for its crystals of red, orange, and yellow colors and many polymorphs of solved structures (12). Of the many polymorphs, ON (orange needles) nucleates the fastest with the runner up (Y04) trailing by a factor of 103 when compared under the same mobility-limited condition, while the other unobserved polymorphs are slower yet by at least 5 orders of magnitude. Similarly, of the six polymorphs of NIF, γ' nucleates the fastest, ß' is slower by a factor of 10, and the rest are slower yet by at least 5 decades. In both systems, the faster-nucleating polymorphs are not built from the lowest-energy conformers, while they tend to have higher energies and lower densities and thus greater similarity to the liquid phase by these measures. The temperature ranges of this study covered the glass transition temperature Tg of each system, and we find no evidence that the nucleation rate is sensitive to the passage of Tg. At the lowest temperatures investigated, the rates of nucleation and growth are proportional to each other, indicating that a similar kinetic barrier controls both processes. The classical nucleation theory provides an accurate description of the observed nucleation rates if the crystal growth rate is used to describe the kinetic barrier for nucleation. The quantitative rates of both nucleation and growth for the competing polymorphs enable prediction of the overall rate of crystallization and its polymorphic outcome.

Surfactants Accelerate Crystallization of Amorphous Nifedipine by Similar Enhancement of Nucleation and Growth Independent of Hydrophilic-Lipophilic Balance.

Amorphous formulations, increasingly employed to deliver poorly soluble drugs, generally contain surfactants to improve wetting and dissolution. These surfactants are often liquids and can potentially increase the mobility of the drug and reduce its stability, but little is known about this effect. Here we investigate the effect of four common nonionic surfactants (Tween 80, Span 80, Triton X-100, and Poloxamer 407) on the crystallization of amorphous nifedipine (NIF). We find that the surfactants significantly enhance the rates of crystal nucleation and growth even at low concentrations, by up to 2 orders of magnitude at 10 wt %. The surfactants tested show similar enhancement effects independent of their structural details and hydrophilic-lipophilic balance (HLB), suggesting that surfactant adsorption at solid/liquid interfaces does not play a major role in crystal nucleation and growth. Importantly, the surfactants accelerate crystal nucleation and growth by a similar factor. This result mirrors the previous finding that a polymer dopant in a molecular glass-former causes similar slowdown of nucleation and growth. These results indicate that nucleation and growth in a deeply supercooled liquid are both mobility-limited, and a dopant mainly functions as a mobility modifier (enhancer or suppressor depending on the dopant). The common surfactants tested are all mobility enhancers and destabilize the amorphous drug, and this negative effect must be managed using stabilizers such as polymers. The effect of surfactants on nucleation can be predicted from the effect on crystal growth and the crystallization kinetics of the pure system, using the same principle previously established for drug-polymer systems. We show how the independently measured nucleation and growth rates enable predictions of the overall crystallization rates.

Overcoming Bioavailability Challenges of Dasabuvir and Enabling a Triple-Combination Direct-Acting Antiviral HCV Regimen through a Salt of Very Weak Acid for Oral Delivery.

Dasabuvir is a non-nucleoside polymerase inhibitor for the treatment of hepatitis C virus (HCV) infection. It is an extremely weak diacidic drug (pKa = 8.2 and 9.2) and a prolific solvate former. Due to its exceedingly low aqueous solubility (≤0.127 µg/mL at pH 1-6.8, dose number of 1.31 × 104), crystalline dasabuvir free acid exhibited poor oral bioavailability in initial animal pharmacokinetic (PK) assessment. This necessitated the development of enabling formulation for human clinical studies to achieve the required therapeutic in vivo concentration of dasabuvir. While salt formation has been widely used to enhance the solubility and dissolution rate of solids, this approach has rarely been applied to develop oral solid dosage forms for acidic drugs as weak as dasabuvir due to concerns of rapid disproportionation and crystallization of its free acid. In this contribution, we detail our efforts in identifying dasabuvir monosodium monohydrate as a drug substance that is stable, manufacturable, and, most importantly, significantly enhances the dissolution and oral absorption of this poorly soluble drug. The oral delivery of dasabuvir through the salt approach has enabled the commercialization of the triple-combination direct-acting antiviral HCV regimen, Viekira Pak. The methodologies and solutions identified in targeted studies to overcome technical challenges encountered along the way (i.e., incorporation of polymers to inhibit crystallization and disproportionation and species mapping to enable salt manufacturing process, etc.) can be applied to other insoluble compounds.

Role of Surfactants on Release Performance of Amorphous Solid Dispersions of Ritonavir and Copovidone.

PURPOSE: To understand the role of different surfactants, incorporated into amorphous solid dispersions (ASDs) of ritonavir and copovidone, in terms of their impact on release, phase behavior and stabilization of amorphous precipitates formed following drug release. METHODS: Ternary ASDs with ritonavir, copovidone and surfactants (30:70:5 w/w/w) were prepared by rotary evaporation. ASD release performance was tested using Wood's intrinsic dissolution rate apparatus and compared to the binary drug-polymer ASD with 30% drug loading. Size measurement of amorphous droplets was performed using dynamic light scattering. Solid state characterization was performed using attenuated total reflectance-infrared spectroscopy, differential scanning calorimetry and scanning electron microscopy. RESULTS: All surfactant-containing ASDs showed improvement over the binary ASD. Span 85 and D-α-tocopheryl polyethylene glycol succinate (TPGS) showed complete release with no evidence of AAPS or crystallization whereas Span 20 and Tween 80 showed < 50% release with amorphous amorphous phase separation (AAPS). Span 20 also induced solution crystallization. Sodium dodecyl sulfate (SDS) showed very rapid, albeit incomplete (~ 80%) release. AAPS was not observed with SDS. However, crystallization on the dissolving solid surface was noted. Span 20 and TPGS formed the smallest and most size-stable droplets with ~ 1 µm size whereas coalescence was noted with other surfactants. CONCLUSIONS: Surfactants improved the release performance relative to the binary ASD. Different surfactant types impacted overall performance to varying extents and affected different attributes. Overall, Span 85 showed best performance (complete release, no crystallization/AAPS and small droplet size). Correlation between physicochemical properties and surfactant performance was not observed.