FeCu bimetallic clusters for efficient urea production via coupling reduction of carbon dioxide and nitrate.

Urea electrosynthesis has appeared to meet the nitrogen cycle and carbon neutrality with energy-saving features. Copper can co-electrocatalyze among CO2 and nitrogen species to generate urea, however developing effective electrocatalysts is still an obstacle. Here, we developed a nitrogen-doped porous carbon loaded with FeCu clusters that convert CO2 and NO3- into urea, with the highest Faradaic efficiency of 39.8 % and yield rate of 1024.6 µg h-1 mgcat.-1, under optimized ambient conditions, exceeding that at the Fe or Cu homogeneous sites. Furthermore, a favorable CN coupling pathway originates from *NHCO and *NHCONO two intermediates with lower free energy barriers on FeCu dual active sites are verified through in-situ Fourier transform infrared spectroscopy and theoretical calculations. This research might provide deep insights into coupling mechanisms and investigation of efficient catalysts for green urea production.

Simulation Study of Coal Seam Gas Extraction Characteristics Based on Coal Permeability Evolution Model under Thermal Effect.

The permeability evolution law of high temperature and high stress coal seam is determined by the influence of multiphase coexistence and multifield coupling. In an environment greatly affected by disturbance and high temperature, the coal permeability model under the coupling of thermal and mechanical creep is not only a vital framework from which to examine gas migration law in multiphase and multifield coal seams but also an important theoretical foundation for gas control in coal seams. The influence of high-temperature environment on creep deformation and permeability is analyzed by several creep seepage tests under different temperature conditions.A mathematical model for the evolution of coal permeability considering the influence of temperature is established through the theory of matrix-crack interaction based on gas adsorption and desorption and thermal expansion deformation. Based on the permeability model under the coupling of thermal and mechanical creep, the numerical model of gas migration, seepage field, diffusion field, stress field, and temperature field is constructed, and the law of gas migration in coal seam under multifield coupling is explored. The influence law of thermal effect on gas extraction characteristics is analyzed, in which the time-varying mechanism of temperature field, the relationship between creep deformation and temperature and pressure, the influence of creep deformation on permeability, the dynamic distribution of gas pressure, and the change of gas extraction quantity are described in detail. It is concluded that the influence of temperature on permeability is much greater than that of creep deformation and that a high initial coal seam temperature is beneficial to gas extraction. It provides theoretical basis and technical guidance for the study of multifield coupled gas migration and coal seam gas treatment.

Growth, spectroscopy and laser operation of Tm,Ho:GdScO3 perovskite crystal.

We report on the growth, polarized spectroscopy and first laser operation of an orthorhombic (space group Pnma) Tm3+,Ho3+-codoped gadolinium orthoscandate (GdScO3) perovskite-type crystal. A single crystal of 3.76 at.% Tm, 0.35 at.% Ho:GdScO3 was grown by the Czochralski method. Its polarized absorption and fluorescence properties were studied revealing a broadband emission around 2 µm. The parameters of the Tm3+ ↔ Ho3+ energy transfer was quantified, P28 = 1.30 × 10-22 cm3µs-1, and P71 = 0.99 × 10-23 cm3µs-1, and the thermal equilibrium lifetime was measured to be 3.5 ms. The crystal-field splitting of Tm3+ and Ho3+ multiplets in Cs symmetry sites of the perovskite structure was determined by low-temperature spectroscopy and the mechanism of spectral line broadening is discussed. The continuous-wave Tm,Ho:GdScO3 laser generated 1.16 W at ∼2.1 µm with a slope efficiency of 50.5%, a laser threshold of 184 mW, a linear laser polarization (E || c) and a spatially single-mode output. The Tm,Ho:GdScO3 crystal is promising for broadly tunable and femtosecond mode-locked lasers emitting above 2 µm.

Endogenous Hormone Levels and Transcriptomic Analysis Reveal the Mechanisms of Bulbil Initiation in Pinellia ternata.

Pinellia ternata is a medicinal plant that has important pharmacological value, and the bulbils serve as the primary reproductive organ; however, the mechanisms underlying bulbil initiation remain unclear. Here, we characterized bulbil development via histological, transcriptomic, and targeted metabolomic analyses to unearth the intricate relationship between hormones, genes, and bulbil development. The results show that the bulbils initiate growth from the leaf axillary meristem (AM). In this stage, jasmonic acid (JA), abscisic acid (ABA), isopentenyl adenosine (IPA), and salicylic acid (SA) were highly enriched, while indole-3-acetic acid (IAA), zeatin, methyl jasmonate (MeJA), and 5-dexoxystrigol (5-DS) were notably decreased. Through OPLS-DA analysis, SA has emerged as the most crucial factor in initiating and positively regulating bulbil formation. Furthermore, a strong association between IPA and SA was observed during bulbil initiation. The transcriptional changes in IPT (Isopentenyltransferase), CRE1 (Cytokinin Response 1), A-ARR (Type-A Arabidopsis Response Regulator), B-ARR (Type-B Arabidopsis Response Regulator), AUX1 (Auxin Resistant 1), ARF (Auxin Response Factor), AUX/IAA (Auxin/Indole-3-acetic acid), GH3 (Gretchen Hagen 3), SAUR (Small Auxin Up RNA), GA2ox (Gibberellin 2-oxidase), GA20ox (Gibberellin 20-oxidase), AOS (Allene oxide synthase), AOC (Allene oxide cyclase), OPR (Oxophytodienoate Reductase), JMT (JA carboxy l Methyltransferase), COI1 (Coronatine Insensitive 1), JAZ (Jasmonate ZIM-domain), MYC2 (Myelocytomatosis 2), D27 (DWARF27), SMAX (Suppressor of MAX2), PAL (Phenylalanine Ammonia-Lyase), ICS (Isochorismate Synthase), NPR1 (Non-expressor of Pathogenesis-related Genes1), TGA (TGACG Sequence-specific Binding), PR-1 (Pathogenesis-related), MCSU (Molybdenium Cofactor Sulfurase), PP2C (Protein Phosphatase 2C), and SnRK (Sucrose Non-fermenting-related Protein Kinase 2) were highly correlated with hormone concentrations, indicating that bulbil initiation is coordinately controlled by multiple phytohormones. Notably, eight TFs (transcription factors) that regulate AM initiation have been identified as pivotal regulators of bulbil formation. Among these, WUS (WUSCHEL), CLV (CLAVATA), ATH1 (Arabidopsis Thaliana Homeobox Gene 1), and RAX (Regulator of Axillary meristems) have been observed to exhibit elevated expression levels. Conversely, LEAFY demonstrated contrasting expression patterns. The intricate expression profiles of these TFs are closely associated with the upregulated expression of KNOX(KNOTTED-like homeobox), suggesting a intricate regulatory network underlying the complex process of bulbil initiation. This study offers a profound understanding of the bulbil initiation process and could potentially aid in refining molecular breeding techniques specific to P. ternata.

Single-step batch fabrication of microfluidic paper-based analytical devices with a 3D printer and their applications in nanoenzyme-enhanced visual detection of dopamine.

Wax printing is the most widely used method for fabricating microfluidic paper-based analytical devices (µPADs), but it still suffers from disadvantages like discontinuation of wax printers and need for additional equipment for heating treatment. To address these issues, this work initially describes a new class of wax printing approach for high-precision, batch fabrication of µPADs using a household 3D printer. It only involves a one patterning step of printing polyethylene wax into rice paper body. Under optimized parameters, a fabrication resolution, namely the minimum hydrophilic channel width, down to ~189 ± 30 µm could be achieved. In addition, the analytical applicability of such polyethylene wax-patterned µPADs was demonstrated well with enhanced colorimetric detection of dopamine as a model analyte by combining metal-organic framework (MOF) based nanoenzymes (ZIF-67) with a smartphone (for portable quantitative readout). The developed nanosensor could linearly detect dopamine over a concentration range from 10 to 1000 µM, with a detection limit of ca. 2.75 µM (3σ). The recovery results for analyzing several real samples (i.e., pig feed, chicken feed, pork and human serum) were between 91.82 and 102.79%, further validating its good detection accuracy for potential practical applications in food safety and medical diagnosis.

Diet and lifestyle behaviours simultaneously act on frailty: it is time to move the threshold of frailty prevention and control forward.

BACKGROUND: To analyse the association among the simultaneous effects of dietary intake, daily life behavioural factors, and frailty outcomes in older Chinese women, we predicted the probability of maintaining physical robustness under a combination of different variables. METHODS: The Fried frailty criterion was used to determine the three groups of "frailty", "pre-frailty", and "robust", and a national epidemiological survey was performed. The three-classification decision tree model was fitted, and the comprehensive performance of the model was evaluated to predict the probability of occurrence of different outcomes. RESULTS: Among the 1,044 participants, 15.9% were frailty and 50.29% were pre-frailty; the overall prevalence first increased and then decreased with age, reaching a peak at 70-74 years of age. Through univariate analysis, filtering, and embedded screening, eight significant variables were identified: staple food, spices, exercise (frequency, intensity, and time), work frequency, self-feeling, and family emotions. In the three-classification decision tree, the values of each evaluation index of Model 3 were relatively average; the accuracy, recall, specificity, precision, and F1 score range were between 75% and 84%, and the AUC was also greater than 0.800, indicating excellent performance and the best interpretability of the results. Model 3 takes exercise time as the root node and contains 6 variables and 10 types, suggesting the impact of the comprehensive effect of these variables on robust and non-robust populations (the predicted probability range is 6.67-93.33%). CONCLUSION: The combined effect of these factors (no exercise or less than 0.5 h of exercise per day, occasional exercise, exercise at low intensity, feeling more tired at work, and eating too many staple foods (> 450 g per day) are more detrimental to maintaining robustness.

Molecular network mechanism in cerebral ischemia-reperfusion rats treated with human urine stem cells.

Objective: To explore the effect of human urine-derived stem cells (husc) in improving the neurological function of rats with cerebral ischemia-reperfusion (CIR), and report new molecular network by bioinformatics, combined with experiment validation. Methods: After CIR model was established, and husc were transplanted into the lateral ventricle of rats，neurological severe score (NSS) andgene network analysis were performed. Firstly, we input the keywords "Cerebral reperfusion" and "human urine stem cells" into Genecard database and merged data with findings from PubMed so as to get their targets genes, and downloaded them to make Venny intersection plot. Then, Gene ontology (GO) analysis, kyoto encyclopedia of genes and genomes (KEGG) pathway analysis and protein-protein interaction (PPI) were performed to construct molecular network of core genes. Lastly, the expressional level of core genes was validated via quantitative real-time polymerase chain reaction (qRT-PCR), and localized by immunofluorescence. Results: Compared with the Sham group, the neurological function of CIR rats was significantly improved after the injection of husc into the lateral ventricle; at 14 days, P = 0.028, which was statistically significant. There were 258 overlapping genes between CIR and husc, and integrated with 252 genes screened from PubMed and CNKI. GO enrichment analysis were mainly involved neutrophil degranulation, neutrophil activation in immune response and platelet positive regulation of degranulation, Hemostasis, blood coagulation, coagulation, etc. KEGG pathway analysis was mainly involved in complement and coagulation cascades, ECM-receptor. Hub genes screened by Cytoscape consist ofCD44, ACTB, FN1, ITGB1, PLG, CASP3, ALB, HSP90AA1, EGF, GAPDH. Lastly, qRT-PCR results showed statistic significance (P < 0.05) in ALB, CD44 and EGF before and after treatment, and EGF immunostaining was localized in neuron of cortex. Conclusion: husc transplantation showed a positive effect in improving neural function of CIR rats, and underlying mechanism is involved in CD44, ALB, and EGF network.

Quality appraisal of clinical guidelines for Helicobacter pylori infection and systematic analysis of the level of evidence for recommendations.

OBJECTIVES: To systematically assess the quality of clinical practice guidelines (CPGs) for Helicobacter pylori (HP) infection and identify gaps that limit their development. STUDY DESIGN AND SETTING: CPGs for HP infection were systematically collected from PubMed, Embase, the Cochrane Library, the Cumulative Index to Nursing and Allied Health Literature, and six online guideline repositories. Three researchers independently used the AGREE Ⅱ tool to evaluate the methodological quality of the eligible CPGs. In addition, the reporting and recommendation qualities were appraised by using the RIGHT and AGREE-REX tools, respectively. The distribution of the level of evidence and strength of recommendation among evidence-based CPGs was determined. RESULTS: A total of 7,019 records were identified, and 24 CPGs met the eligibility criteria. Of the eligible CPGs, 19 were evidence-based and 5 were consensus-based. The mean overall rating score of AGREE II was 50.7% (SD = 17.2%). Among six domains, the highest mean score was for scope and purpose (74.4%, SD = 17.7%) and the lowest mean score was for applicability (24.3%, SD = 8.9). Only three of 24 CPGs were high-quality. The mean overall score of recommendation quality was 35.5% (SD = 12.2%), and the mean scores in each domain of AGREE-REX and RIGHT were all ≤ 60%, with values and preferences scoring the lowest (16.6%, SD = 11.9%). A total of 505 recommendations were identified. Strong recommendations accounted for 64.1%, and only 34.3% of strong recommendations were based on high-quality evidence. CONCLUSION: The overall quality of CPGs for HP infection is poor, and CPG developers tend to neglect some domains, resulting in a wide variability in the quality of the CPGs. Additionally, CPGs for HP infection lack sufficient high-quality evidence, and the grading of recommendation strength should be based on the quality of evidence. The CPGs for HP infection have much room for improvement and further researches are required to minimize the evidence gap.

SESAM mode-locked Yb:GdScO3 laser.

We report on the investigation of continuous-wave (CW) and SEmiconductor Saturable Absorber Mirror (SESAM) mode-locked operation of a Yb:GdScO3 laser. Using a single-transverse-mode, fiber-coupled InGaAs laser diode at 976 nm as a pump source, the Yb:GdScO3 laser delivers 343 mW output power at 1062 nm in the CW regime, which corresponds to a slope efficiency of 52%. Continuous tuning is possible across a wavelength range of 84 nm (1027-1111 nm). Using a commercial SESAM to initiate mode-locking and stabilize soliton-type pulse shaping, the Yb:GdScO3 laser produces pulses as short as 42 fs at 1065.9 nm, with an average output power of 40 mW at 66.89 MHz. To the best of our knowledge, this is the first demonstration of passively mode-locking with Yb:GdScO3 crystal.

SlPHL1 positively modulates acid phosphatase in response to phosphate starvation by directly activating the genes SlPAP10b and SlPAP15 in tomato.

Increased acid phosphatase (APase) activity is a prominent feature of tomato (Solanum lycopersicum) responses to inorganic phosphate (Pi) restriction. SlPHL1, a phosphate starvation response (PHR) transcription factor, has been identified as a positive regulator of low Pi (LP)-induced APase activity in tomato. However, the molecular mechanism underlying this regulation remains to be elucidated. Here, SlPHL1 was found to positively regulate the LP-induced expression of five potential purple acid phosphatase (PAP) genes, namely SlPAP7, SlPAP10b, SlPAP12, SlPAP15, and SlPAP17b. Furthermore, we provide evidence that SlPHL1 can stimulate transcription of these five genes by binding directly to the PHR1 binding sequence (P1BS) located on their promoters. The P1BS mutation notably weakened SlPHL1 binding to the promoters of SlPAP7, SlPAP12, and SlPAP17b but almost completely abolished SlPHL1 binding to the promoters of SlPAP10b and SlPAP15. As a result, the transcriptional activation of SlPHL1 on SlPAP10b and SlPAP15 was substantially diminished. In addition, not only did transient overexpression of either SlPAP10b or SlPAP15 in tobacco leaves increase APase activity, but overexpression of SlPAP15 in Arabidopsis and tomato also increased APase activity and promoted plant growth. Subsequently, two SPX proteins, SlSPX1 and SlSPX4, were shown to physically interact with SlPHL1. Moreover, SlSPX1 inhibited the transcriptional activation of SlPHL1 on SlPAP10b and SlPAP15 and negatively regulated the activity of APase. Taken together, these results demonstrate that SlPHL1-mediated LP signaling promotes APase activity by activating the transcription of SlPAP10b and SlPAP15, which may provide valuable insights into the mechanisms of tomato response to Pi-limited stress.

Growth, spectroscopy and SESAM mode-locking of a "mixed" Yb:Ca(Gd,Y)AlO4 disordered crystal.

We present the growth, spectroscopy, continuous-wave (CW) and passively mode-locked (ML) operation of a novel "mixed" tetragonal calcium rare-earth aluminate crystal, Yb3+:Ca(Gd,Y)AlO4. The absorption, stimulated-emission, and gain cross-sections are derived for π and σ polarizations. The laser performance of a c-cut Yb:Ca(Gd,Y)AlO4 crystal is studied using a spatially single-mode, 976-nm fiber-coupled laser diode as a pump source. A maximum output power of 347 mW is obtained in the CW regime with a slope efficiency of 48.9%. The emission wavelength is continuously tunable across 90 nm (1010 - 1100 nm) using a quartz-based Lyot filter. With a commercial SEmiconductor Saturable Absorber Mirror to initiate and maintain ML operation, soliton pulses as short as 35 fs are generated at 1059.8 nm with an average output power of 51 mW at ∼65.95 MHz. The average output power can be scaled to 105 mW for slightly longer pulses of 42 fs at 1063.5 nm.

Continuous-wave and SESAM mode-locked operation of a Yb:YSr3(PO4)3 laser.

We report on the continuous-wave (CW) and, for what we believe to be the first time, passively mode-locked (ML) laser operation of an Yb3+-doped YSr3(PO4)3 crystal. Utilizing a 976-nm spatially single-mode, fiber-coupled laser diode as pump source, the Yb:YSr3(PO4)3 laser delivers a maximum CW output power of 333 mW at 1045.8 nm with an optical efficiency of 55.7% and a slope efficiency of 60.9%. Employing a quartz-based Lyot filter, an impressive wavelength tuning range of 97 nm at the zero level was achieved in the CW regime, spanning from 1007 nm to 1104 nm. In the ML regime, incorporating a commercially available semiconductor saturable absorber mirror (SESAM) to initiate and maintain soliton-like pulse shaping, the Yb:YSr3(PO4)3 laser generated pulses as short as 61 fs at 1062.7 nm, with an average output power of 38 mW at a repetition rate of ∼66.7 MHz.

Simple, sensitive, colorimetric detection of pyrophosphate via the analyte-triggered decomposition of metal-organic frameworks regulating their adaptive multi-color Tyndall effect.

This paper describes initially the application of the Tyndall effect (TE) of metal-organic framework (MOF) materials as a colorimetric signaling strategy for the sensitive detection of pyrophosphate ion (PPi). The used MOF NH2-MIL-101(Fe) was prepared with Fe3+ ions and fluorescent ligands of 2-amino terephthalic acid (NH2-BDC). The fluorescence of NH2-BDC in MOF is quenched due to the ligand-to-metal charge transfer effect, while the NH2-MIL-101(Fe) suspension shows a strong TE. In the presence of PPi analyte, the MOFs will undergo decomposition because of the competitive binding of Fe3+ by PPi over NH2-BDC, resulting in a significant decrease in the TE signal and fluorescence restoration from the released ligands. The results demonstrate that the new method only requires a laser pointer pen (for TE creation) and a smartphone (for portable quantitative readout) to detect PPi in a linear concentration range of 1.25-800 µM, with a detection limit of ~210 nM (3σ) which is ~38 times lower than that obtained from traditional fluorescence with a spectrophotometer (linear concentration range, 50-800 µM; detection limit, 8.15 µM). Moreover, the acceptable recovery of PPi in several real samples (i.e., pond water, black tea, and human serum and urine) ranges from 97.66 to 119.15%.

An ovalbumin fusion strategy to increase recombinant protein secretion in chicken eggs.

Maternal secretion of recombinant proteins into chicken eggs may provide a viable approach for pharmaceutical production but remains limited by poor secretion efficiency through the membrane of oviduct cells, despite high expression levels. Here, we used site-specific integration of an EGFP fused to the OVAL gene by a rigid linker, (EAAAK)3, at the endogenous ovalbumin locus in chicken primordial germ cells to generate OVAL-E3-EGFP transgenic chickens, with transgenic chickens expressing CMV immediate enhancer/ß-actin-driven EGFP (CAG-EGFP) as a non-secreted control. In OVAL-E3-EGFP chickens, EGFP protein produced in maternal oviducts accumulates to high levels in eggs, but not in eggs of CAG-EGFP chickens. These results indicated that the secretion of foreign proteins can be substantially increased through fusion to the highly secreted endogenous ovalbumin. This study describes a basis for high yield recombinant protein expression in chicken eggs, enabling rapid and scalable production of numerous pharmaceutical proteins or metabolites.

MPZL2-a common autosomal recessive deafness gene related to moderate sensorineural hearing loss in the Chinese population.

BACKGROUND: Mutations in MPZL2, the characteristic genetic etiology of autosomal recessive deafness loci 111 (DFNB111), cause non-syndromic and moderate sensorineural hearing loss. METHODS: In this study, we analyzed the phenotype and genotype of eight pedigrees consisting of 10 hearing loss patients with bi-allelic pathogenic or likely pathogenic variants in MPZL2. These patients were identified from a 3272 Chinese patient cohort who underwent genetic testing. RESULTS: Apart from symmetrical and moderate sensorineural hearing loss, the MPZL2-related phenotype was characterized by progressive hearing loss with variation in the onset age (congenital defect to onset at the young adult stage). We determined that in the Chinese population, the genetic load of MPZL2 defects was 0.24% (8/3272) in patients diagnosed with hearing loss and 7.02% (8/114) in patients diagnosed with hereditary moderate sensorineural hearing loss caused by STRC, OTOA, OTOG, OTOGL, TECTA, MPZL2 and others. Three known MPZL2 variants (c.220C > T (p.Gln74*), c.68delC (p.Pro23Leufs*2), c.463delG (p.Ala155Leufs*10)) and a novel start loss variant (c.3G > T (p.Met1?)) were identified. MPZL2 c.220C > T was identified as the hotspot variant in the Chinese population and even in East Asia compared with c.72delA (p.Ile24Metfs*22) in European and West Asia through allele frequency. CONCLUSIONS: We concluded that apart from moderate HL, progressive HL is another character of MPZL2-related HL. No specified variant was verified for the progression of HL, the penetrance and expressivity cannot be determined yet. A novel MPZL2 variant at the start codon was identified, enriching the variant spectrum of MPZL2. The hotspot variants of MPZL2 vary in different ethnicities. This study provides valuable data for the diagnosis, prognosis evaluation and genetic counseling of patients with moderate sensorineural hearing loss related to MPZL2.

Automatic segmentation of mandibular canal using transformer based neural networks.

Accurate 3D localization of the mandibular canal is crucial for the success of digitally-assisted dental surgeries. Damage to the mandibular canal may result in severe consequences for the patient, including acute pain, numbness, or even facial paralysis. As such, the development of a fast, stable, and highly precise method for mandibular canal segmentation is paramount for enhancing the success rate of dental surgical procedures. Nonetheless, the task of mandibular canal segmentation is fraught with challenges, including a severe imbalance between positive and negative samples and indistinct boundaries, which often compromise the completeness of existing segmentation methods. To surmount these challenges, we propose an innovative, fully automated segmentation approach for the mandibular canal. Our methodology employs a Transformer architecture in conjunction with cl-Dice loss to ensure that the model concentrates on the connectivity of the mandibular canal. Additionally, we introduce a pixel-level feature fusion technique to bolster the model's sensitivity to fine-grained details of the canal structure. To tackle the issue of sample imbalance and vague boundaries, we implement a strategy founded on mandibular foramen localization to isolate the maximally connected domain of the mandibular canal. Furthermore, a contrast enhancement technique is employed for pre-processing the raw data. We also adopt a Deep Label Fusion strategy for pre-training on synthetic datasets, which substantially elevates the model's performance. Empirical evaluations on a publicly accessible mandibular canal dataset reveal superior performance metrics: a Dice score of 0.844, click score of 0.961, IoU of 0.731, and HD95 of 2.947 mm. These results not only validate the efficacy of our approach but also establish its state-of-the-art performance on the public mandibular canal dataset.

Waterlogging increases greenhouse gas release and decreases yield in winter rapeseed (Brassica napus L.) seedlings.

A sustainable future depends on increasing agricultural carbon (C) and nitrogen (N) sequestration. Winter rapeseeds are facing severe yield loss after waterlogging due to the effects of extreme rainfall, especially in the seedling stage, where rainfall is most sensitive. Uncertainty exists over the farming greenhouse gas (GHG) release of rapeseed seedlings following the onset of waterlogging. The effect of waterlogging on GHG release and leaf gas exchange in winter rapeseed was examined in a pot experiment. The experiment included waterlogging treatments lasting 7-day and 21-day and normal irrigation as a control treatment. According to our findings, (1) The ecosystem of rapeseed seedlings released methane (CH4) and nitrous oxide (N2O) in a clear up change that was impacted by ongoing waterlogging. Among them, N2O release had a transient rise during the early stages under the effect of seedling fertilizer. (2) The net photosynthetic rate, transpiration rate, stomatal conductance, plant height, soil moisture, and soil oxidation-reduction potential of rapeseed all significantly decreased due to the ongoing waterlogging. However, rapeseed leaves showed a significant increase in intercellular carbon dioxide (CO2) concentration and leaf chlorophyll content values after waterlogging. Additionally, the findings demonstrated an extremely significant increase in the sustained-flux global warming potential of the sum CO2-eq of CH4 and N2O throughout the entire waterlogging stress period. Therefore, continuous waterlogging can increase C and N release from rapeseed seedlings ecosystem and decrease yield. Therefore, we suggest increasing drainage techniques to decrease the release of agricultural GHGs and promote sustainable crop production.

All electromagnetic scattering bodies are matrix-valued oscillators.

Scattering theory is the basis of all linear optical and photonic devices, whose spectral response underpins wide-ranging applications from sensing to energy conversion. Unlike the Shannon theory for communication channels, or the Fano theory for electric circuits, understanding the limits of spectral wave scattering remains a notoriously challenging open problem. We introduce a mathematical scattering representation that inherently embeds fundamental principles of causality and passivity into its elemental degrees of freedom. We use this representation to reveal strong constraints in the mathematical structure of scattered fields, and to develop a general theory of the maximum radiative heat transfer in the near field, resolving a long-standing open question. Our approach can be seamlessly applied to high-interest applications across nanophotonics, and appears extensible to general classical and quantum scattering theory.

Effect of Synthesis Factors on Microstructure and Thermoelectric Properties of FeTe2 Prepared by Solid-State Reaction.

The alloying compound FeTe2 is a semi-metallic material with low thermal conductivity and has the potential to become a thermoelectric material. Single-phase FeTe2 compounds are synthesized using a two-step sintering method, and the effects of the optimal sintering temperature, holding temperature, and holding time on the thermoelectric properties of the alloy compound FeTe2 are investigated. The phase composition, microstructure, and electrical transport properties of the FeTe2 compound are systematically analyzed. The results show that single-phase FeTe2 compounds can be synthesized within the range of a sintering temperature of 823 K and holding time of 10~60 min, and the thermoelectric properties gradually deteriorate with the prolongation of the holding time. Microstructural analysis reveals that the sample of the alloy compound FeTe2 exhibits a three-dimensional network structure with numerous fine pores, which can impede thermal conduction and thus reduce the overall thermal conductivity of the material. When the sintering temperature is 823 K and the holding time is 30 min, the sample achieves the minimum electrical resistivity of 6.9 mΩ·cm. The maximum Seebeck coefficient of 65.48 µV/K is obtained when the sample is held at 823 K for 10 min; and under this condition, the maximum power factor of 59.54 µW/(m·K2) is achieved. In the whole test temperature range of 323~573 K, when the test temperature of the sample is 375 K, the minimum thermal conductivity is 1.46 W/(m·K), and the maximum ZT is 1.57 × 10-2.

P-doping boosting electronic properties and ionic kinetics of MnV2O6 for high-performance lithium-ion batteries.

Vanadate electrodes are potential candidates for lithium-ion batteries (LIBs) due to their large theoretical specific capacity. However, their practical application suffers from limitations of poor conductivity, inferior ion kinetics, and severe volume changes upon cycling. Herein, a doping strategy is realized to prepare phosphorus (P)-doped MnV2O6 (PMVO) nanosheets to enhance the electrochemical activity and structural stability. On combining experimental and computation results, it is found that the PMVO structure enhances the electrical conductivity, reduces the adsorption energy of lithium ions, increases the structural stability, and facilitates rapid surface diffusion kinetics. As expected, the desirable electrode of PMVO delivers a reversible capacity of 812.7 mA h g-1 at 200 mA g-1 and shows excellent coulombic efficiency, as well as an extraordinary energy density of 472.1 W h kg-1. Meanwhile, an excellent rate performance (from 0.1 to 5.0 and return to 0.1 A g-1; 779.6 to 319.6 and return to 811.9 mA h g-1) could be achieved. The strategy proposed here may aid in further development of doped vanadate electrodes for high-performance LIBs.