Aqueous preparation of arginyl-fructosyl-glucose (a maltose-arginine AC) and determination of Amadori compounds (ACs) in red ginseng by ultra-high performance liquid chromatography tandem mass spectrometry (UPLC-MS/MS).

Amadori compounds (ACs) are key Maillard intermediates in various foods after thermal processing, and are also important non-saponin components in red ginseng. Currently, due to the difficulty in obtaining AC standards, the determination of multiple ACs is limited and far from optimal. In this study, an ultra-high performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) method was developed and validated. A green synthetic method was developed for arginyl-fructosyl-glucose (AFG), the major AC in red ginseng with potential health benefits. The UPLC-MS/MS method was then applied in identification and quantification of ACs in red ginseng samples, which showed for the first time that 12 other ACs also exist in red ginseng in addition to AFG and arginyl-fructose (total 98.88 % of all ACs). Contents of AFG and arginyl-fructose in whole red ginseng were 36.23 and 10.80 mg/g dry weight, respectively. Raw ginseng can be steamed and then dried whole to obtain whole red ginseng, or sliced before drying to obtain sliced red ginseng. Slicing before drying was found to reduce ACs content. Results of the present study will help to reveal the biological functions of red ginseng and related products associated with ACs and promote the standardization of red ginseng manufacture.

Effects of Low Temperature-Ultrasound-Papain (LTUP) Combined Treatments on Purine Removal from Pork Loin and Its Influence on Meat Quality and Nutritional Value.

A combined pretreatment method of "low temperature-ultrasound-papain" (LTUP) was proposed to remove the purine of pork loins. Compared with untreated pork loin, under optimal conditions (temperature 58 °C, ultrasound density 100 W/cm2, and papain concentration 0.085%), the purine removal rate of treated pork loin could reach 59.29 ± 1.39%. The meat quality of pork loin treated with the LTUP method such as hardness and chewiness decreased by 58.37% and 64.38%, respectively, and the in vitro protein digestibility was increased by 19.64%; the cooking loss was decreased by 15.45%, compared with the simulated household blanching process (HT). In view of the high purine removal rate, the losses of free amino acids and soluble peptides were acceptable and reasonable. SEM and LF-NMR results showed that low temperature and ultrasound combined with papain treatment opened a channel for purine transfer and promoted purine dissolution by affecting the protein structure of pork loin. In addition, the migration of water within the muscle tissue was also related to purine removal. In summary, LTUP is recommended as an efficient and green way for the meat industry to remove purine.

Preparation of red jujube powder with high content of Amadori compounds and higher antioxidant activity by controlling the Maillard reaction.

Amadori compounds (ACs) are stable compounds produced in the early stage of the Maillard reaction (MR) with health benefits such as immunomodulatory, antithrombosis, and tumor-preventive effects. Jujube is a medicinal and edible fruit in China. It is rich in free amino acids and reducing sugar, but traditionally, little attention was paid to the formation of ACs when jujube was processed, neither the influence of ACs on health effects. In this paper, we aimed to increase ACs through controlling the MR during different heating processes of jujube powder with adjusted water content and find the most effective AC that contributed to the antioxidant effects of jujube powder. The optimal dry-heating conditions to produce ACs were as follows: The water activity was 0.294, the heating temperature was 90°C, and the time was 120 min. After processing, the ACs content of jujube powder was 18.55 ± 0.19 mg/g dry weight (DW), which was more than 100 times of those in the unheated jujube powder (0.153 ± 0.003 mg/g DW). Besides, the antioxidant activity of jujube powder after dry-heating process was higher than that of unheated one. As the most abundant AC in the dry-heated jujube powder (12.90 ± 0.75 mg/g DW), N-(1-deoxy-d-fructose-1-yl) proline (Fru-Pro) showed the highest antioxidant activity (62% of equivalent l-ascorbic acid) among 12 ACs in ferric reducing antioxidant power assay. This result provided a method to produce jujube product with high content of ACs and confirmed the positive contribution of Fru-Pro to the antioxidant activity of the jujube powder.

Resveratrol augments paclitaxel sensitivity by modulating miR-671-5p/STOML2/PINK1/Parkin-mediated autophagy signaling in A549 cell.

BACKGROUND: Paclitaxel (PTX) resistance has become a notable clinical concern of Non-small cell lung cancer (NSCLC). Our study aim is to investigate the effects of Resveratrol (RES) on NSCLC cells that have developed resistance to PTX. The NSCLC cell line A549 was employed in this investigation to establish a PTX-resistant NSCLC cell line, denoted as A549/PTX, and established tumor transplantaton model. The presence of miR-671-5p, Stomatin-like protein 2 (STOML2), and mitophagy biomarkers was evaluated using quantitative teal-time PCR (qRT-PCR) and western blot, The assessment of cell proliferation and apoptosis was conducted through the utilisation of colony formation and flow cytometry assays. The investigation of mitochondrial autolysosomes was conducted using transmission electron microscopy (TEM). Our results showed that the application of RES therapy resulted in a substantial improvement in the sansitivity of A549/PTX cells. RES exhibited an augmentation of apoptosis and a suppression of mitophagy in A549/PTX cells. RES induced an upregulation in the expression of miR-671-5p. This, in turn, leaded to the inhibition of STOML2, a protein that directly interacts with PINK1. In summary, our research indicates that RES improved the susceptibility of A549/PTX cells to PTX through miR-671-5p-mediated STOML2 inhibition.

Fate of Amadori compounds in processing and digestion of multi-ingredients tomato based sauces and their effect on other microconstituents.

Amadori compounds (ACs), the first stable products of Maillard reaction, are detected in various products of fruits and vegetables, and show an antioxidant activity which can be related to beneficial effects in human health. In order to optimize the nutritional quality of a multi-ingredient tomato sauce (tomato puree - onion - olive oil - dried pepper), the fate of ACs during processing (drying, heating) and gastrointestinal digestion of a model meal was assessed as well as that of other microconstituents, i.e. carotenoids, phenolic compounds and capsaicinoids. The drying at 50 °C of fresh pepper induced the formation and accumulation of ACs after 6 days. During the heat treatment by microwave of multi-ingredient tomato sauce, Maillard reaction occurs in presence of dried pepper and the content in ACs in the tomato-based sauces increased (+33% to + 53%) depending of quantities of dried pepper added. The bioaccessibility of total ACs was 24-31% in duodenal phase and 18-22% in jejunal phase. Individual ACs have shown variable bioaccessibility, e.g. very high for Fru-Arg (50.8% to 71.3%), and very low for Fru-Met (1.8% to 2.2%). The kinetic monitoring of ACs in digestion medium showed that ACs are not stable (-46% in gastric phase, -49 % in intestinal phase) which indicated their potential degradation in the digestive tract. The presence of ACs in the multi-ingredients tomato sauces had no effect on the content of the other bioactive compounds monitored in the study and even promoted the bioaccessibility of total lycopene (+30%) but decreased the bioaccessibility of total phenolic compounds.

Application of 3D Slicer Combined With Simple Coordinate Method in Operation of Cerebral Arteriovenous Malformations in Functional Areas.

The authors report a case of intracranial arteriovenous malformation in functional areas, initially presenting with symptomatic epilepsy was surgically excised by the Neurosurgery Department of our hospital. The patient's head computed tomography, magnetic resonance imaging, and digital subtraction angiography examination suggested intracranial arteriovenous malformations in the left frontal functional area. A preoperative 3D-reconstruction technique was used to reconstruct the malformed vascular mass, supplying arteries, draining veins, and precise surgical resection was performed. Postoperative pathology indicated vascular malformation. No seizures occurred after surgery. There was no further neurological impairment. Preoperative use of image postprocessing techniques can facilitate precise surgical resection of brain arteriovenous malformations. Three-dimensional Slicer in cerebral arteriovenous malformations in functional areas not only shortened the preoperative planning time but also improved the efficiency of the surgery. Reduce the incidence of postoperative complications. It is helpful for further popularization and application.

Effect of flocculant dosage on the settling properties and underflow concentration of thickener for flocculated tailing suspensions.

Flocculation is important in the thickening process to improve the underflow concentration in thickeners for tailing suspensions. Traditional zone settling velocity (ZSV) functions ignore the effect of flocculant dosage on the ZSV and the thickening behavior of thickeners. To investigate the effect of flocculant dosage on the settling flux function, a series of batch settling tests were conducted at various flocculant dosages for unclassified and fine tailings. The correlation among flocculant dosage, solid fraction, and parameters in the ZSV function was revealed. Moreover, a simulation of continuous thickening based on the ZSV function was performed. Results indicated that flocculation influenced settling velocity and floc density. With an increased flocculant dosage, the settling velocity of floc increased, resulting in increased underflow concentration. Conversely, floc density decreased due to a stronger particle-particle interaction, leading to a decreased underflow concentration.

Oxidation of Cathepsin D by Hydroxy Radical: Its Effect on Enzyme Structure and Activity against Myofibrillar Proteins Extracted from Coregonus peled.

In this study, cathepsin D was oxidized in vitro with different concentrations of H2O2, and the activity, structure, and extent of myofibrillar protein degradation by oxidized cathepsin D were evaluated. The sulfhydryl content of cathepsin D decreased to 9.20% after oxidation, while the carbonyl content increased to 100.06%. The ß-sheet in the secondary structure altered due to oxidation as well. The changes in the intrinsic fluorescence and UV absorption spectra indicated that oxidation could cause swelling and aggregation of cathepsin D molecules. The structure of cathepsin D could change its activity, and the activity was highest under 1 mM H2O2. Cathepsin D could degrade myofibrillar proteins in different treatment groups, and the degree of degradation is various. Therefore, this study could provide a scientific basis for the mechanism of interaction among hydroxyl radical oxidation, cathepsin D, and MP degradation.

Interaction of preheated whey protein isolate with rose anthocyanin extracts in beverage model system: Influence on color stability, astringency and mechanism.

Preheating proteins have the potential to improve anthocyanin stability. Our aim was to investigate the effect of preheated whey protein isolate (WPI) on the color stability and astringency of the beverage model system in the presence of rose anthocyanin extracts (RAEs), and to explore the mechanism of interaction between preheated WPI and RAEs. The secondary structure, particle size and transparency of WPI were obviously changed by preheating. WPI preheated at 100°C  (WPI100) could effectively improve the color stability of RAEs in the beverage model system. Importantly, the WPI100-RAEs in the beverage model system exhibited the smallest particle size and the weakest astringency effect. In addition, different preheated WPIs could interact with RAEs non-covalently, and the interaction forces are hydrogen bonding and van der Waals forces, among which WPI100 had the strongest binding ability to RAEs. These results will provide a new insight into the development of protein-anthocyanin beverages.

Influence of rose anthocyanin extracts on physicochemical properties and in vitro digestibility of whey protein isolate sol/gel: Based on different pHs and protein concentrations.

Protein-polyphenol interactions can improve the physicochemical properties of proteins. The objective of this study was to investigate the influence of rose anthocyanin extracts (RAEs) on the physicochemical properties and digestibility of whey protein isolate (WPI) sol/gel at different pHs and protein concentrations. Hydrophobicity interaction and ionic bonding were the main forces for the formation of acidic WPI and WPI-RAEs sol/gel. When pH was higher than 2.4, sol/gel became unstable, which may be related to hydrophobicity, ζ-potential value, total sulfhydryl and free sulfhydryl content changes. In addition, RAEs had positive effects on the color and water distribution of all WPI sol/gel. Moreover, RAEs improved the viscoelasticity of WPI sol/gel with protein content ≥ 12 % (w/v) at pH 2.4. More importantly, the addition of RAEs could reduce the digestibility of WPI sol/gel. We hope our works can provide promising strategies for developing WPI-RAEs foods.

Formation of Amadori compounds in LIGAO (concentrated pear juice) processing and the effects of Fru-Asp on cough relief and lung moisturization in mice.

LIGAO (concentrated pear juice) has been used for more than 1000 years to treat respiratory complaints such as cough and expectoration in China, but the study of the mechanism of its antitussive effects and ability to moisten the lungs is limited. This study found that the content of Amadori compounds (ACs) and other nutrients changed during LIGAO processing. Furthermore, N-(1-deoxy-D-fructos-1-yl)-aspartic acid (Fru-Asp), the most abundant and characteristic AC in LIGAO, was prepared and studied. The antitussive test revealed that Fru-Asp could significantly reduce the frequency of cough and prolong the cough latent period in mice. A high dose of Fru-Asp (250 mg kg-1) in mice provided better therapeutic activities than that of dextromethorphan hydrobromide tablets (30 mg kg-1). In the Fru-Asp pretreated group, Fru-Asp significantly alleviated inflammation in LPS-induced acute lung injury mice. Fru-Asp can significantly decrease the levels of TNF-α and IL-ß in mice by 11%. Additionally, Fru-Asp exhibited angiotensin-converting enzyme (ACE) inhibitor activity (IC50 = 0.242 mM). The contribution and health benefits of Fru-Asp on cough relief were first reported in this study, which also substantiated it as a functional component of LIGAO. The results provided the basis for future research on the health effects of ACs and a method to improve the added value of LIGAO and other pear products.

Study on the Drying Technology of Tomato Pulp with Phytoene, Phytofluene and Lycopene Retention as Inspection Indexes.

The objective was to design a feasible drying method to increase the retention rates of phytoene (PT), phytofluene (PTF) and lycopene (LYC) in tomato powder. The method was to compare the effects of vacuum freeze-drying (FD), vacuum drying (VD) and hot-air drying (HAD) technologies on tomato pulp rich in PT, PTF and LYC. When dried by HAD, the retention rates of PT, PTF and LYC decreased significantly (p < 0.05) only when the water content decreased from 30% to 3.5%. When dried by VD, the temperatures had no significant effect on the retention rates, and only alkaline conditions (pH = 9), Fe3+ and Al3+ could significantly reduce the retention rates (p < 0.05). Therefore, a combined drying process (CDP) was designed: before the water content decreased to 50%, HD (60 °C) technology was used; then, the paste was dried via VD (80 °C, 0.08 MPa) technology till the water content reached 5 ± 2%; loading weight was 40 g (thinkness 5.70 mm) for each batch. Compared with VD alone, the CDP technology improved the retention rates of PT and LYC by 12% and 36%, respectively, while PTF decreased by only 6%.

Preparation of Cellulose Nanocrystals from Jujube Cores by Fractional Purification.

Jujube cores are fiber-rich industrial waste. Dewaxing, alkali treatment, bleaching, and sulfuric acid hydrolysis were used to generate cellulose nanocrystals (CNCs) from the jujube cores in this study. The morphological, structural, crystallinity, and thermal properties of the fibers were investigated using FE-SEM, TEM, AFM, FT-IR, XRD, and TGA under various processes. CNCs' zeta (ζ) potential and water contact angle (WAC) were also investigated. The findings demonstrate that non-fibrous components were effectively removed, and the fiber particles shrunk over time because of many activities. CNCs had a rod-like shape, with a length of 205.7 ± 52.4 nm and a 20.5 aspect ratio. The crystal structure of cellulose Iß was preserved by the CNCs, and the crystallinity was 72.36%. The temperature of the fibers' thermal degradation lowered during the operations, although CNCs still had outstanding thermal stability (>200 °C). Aside from the CNCs, the aqueous suspension of CNCs was slightly agglomerated; thus, the zeta (ζ) potential of the CNCs' suspension was −23.72 ± 1.7 mV, and the powder had high hydrophilicity. This research will be valuable to individuals who want to explore the possibility for CNCs made of jujube cores.

Oxidative Stress Contributes to Cytoskeletal Protein Degradation of Esox lucius through Activation of Mitochondrial Apoptosis during Postmortem Storage.

This study investigated the role of oxidative stress in the mitochondrial apoptotic pathways and structural protein degradation of fish during postmortem storage by measuring oxidative stress levels, mitochondrial antioxidant enzyme activity, mitochondrial dysfunction, apoptotic factors, and structural protein degradation (n = 3). The results revealed that reactive oxygen species (ROS) increased gradually within the first 12 h and then decreased (p < 0.05) in mitochondria. Lipid peroxidation was increased, and superoxide dismutase, catalase, and glutathione peroxidase activities were decreased in mitochondria (p < 0.05). Furthermore, oxidative stress induced mitochondrial membrane opening, mitochondrial swelling, as well as the depolarization of mitochondrial potential. This led to an increase in the release of cytochrome c from mitochondria and caspase-3 activation. Ultimately, oxidative stress promoted small protein degradation (troponin-T and desmin) and induced myofibril susceptibility to proteolysis. These observations confirmed that oxidative stress mediated the activation of mitochondrial apoptotic factors-promoted protein degradation, initiating the deterioration of fish muscle through the mitochondrial apoptotic pathway.

Identification and confirmation of key compounds causing cooked off-flavor in heat-treated tomato juice.

Cooked off-flavor produced by heat treatment greatly limited the acceptability of commercial tomato juice. To screen and identify the cooked off-flavor compounds, gas chromatography-mass spectrometry-olfactometry (GC-MS-O), aroma extract dilution analysis (AEDA), gas chromatography-mass spectrometry (GC-MS), and odor activity value (OAV) calculation were applied simultaneously. The results showed that there were 17 aroma-active compounds in tomato juice samples. Among them, three newly formed sulfur-containing compounds (dimethyl sulfide, dimethyl trisulfide, and methional) and 1-octen-3-one, which exhibited cooked corn/potato, onion, and mushroom odor, were proved to be responsible for the cooked off-flavor in heat-treated tomato juice (HTJ) by omission experiments and electronic nose analysis. The three newly formed sulfur-containing compounds were further confirmed to be the key compounds responsible for the cooked off-flavor in four different tomato cultivars that were commonly consumed in the market. PRACTICAL APPLICATION: Tomato is one of the most popular vegetables in the world and tomato juice is an important part of the tomato industry. However, the cooked off-flavor of tomato juice after sterilization severely restricts its industrial development. This study analyzed and compared the changes of aroma compounds before and after sterilization, and identified and confirmed the major off-flavor components. This work could provide fundamental information for the prevention of cooked off-flavor.

Droplet Dispersion States of Cyclodextrin-Based Emulsions from Nonlinear Rheological Properties.

Polymers are desirable to improve emulsion stability by stuffing them into the continuous phase. How to get information on the droplet dispersion states of the emulsions remains a challenge, as the emulsion characteristics are dictated by two intertwining components, the polymer matrix and the droplets. Herein, we use an amphiphilic polymer, gum arabic (GA), to mediate the droplet flocculation of cyclodextrin (CD)-based emulsions and compare them with our previous studies on the stabilization of CD-based emulsions by a nonamphiphilic polymer, methylcellulose (MC). We characterize the emulsions by using optical microscopy, confocal laser scanning microscopy, and laser particle analysis, explore their rheological behavior through large-amplitude oscillatory shear experiments, and analyze the nonlinear viscoelasticities through Fourier transform (FT)-rheology and Lissajous-Bowditch plots. There is a great difference between GA and MC in the viscosity effect and the arrangement around emulsion droplets. GA is not an effective flocculation inhibitor due to a bridging flocculation mechanism rather than a direct viscosity effect. Our analysis highlights the role of the intrinsic nonlinearity parameter (Q0) extracted by FT analysis in reflecting the droplet dispersion states of the emulsions by decoupling structural contributions from the polymers and the emulsion droplets.

Making Polyol Gummies by 3D Printing: Effect of Polyols on 3D Printing Characteristics.

With growth of confectionery industry, there is a great demand for candy shape, and 3D printing technology is way to achieve it. The printing properties of gummy, which is formed of gelatin and low acyl gellan as gel, maltol, erythritol, sorbitol, and xylitol as sweeteners, were tested in this study. Gummies' rheological properties, 3D printing properties, and textural qualities were measured using a rheometer, FTIR, and SEM in this study. The strength of the hydrogen bonds will be affected by the addition of polyol, after which the excluded volume effect of polyol and viscosity will become the most important aspect. Polyols increased the gelation temperature (Tgelation), improved the gel network, and improved hydrogen bonding in the gel, according to the findings. Yield stress, shear recovery performance, and gel strength were initially increased, then decreased, when polyol concentration was increased. It had a 40.59 °C gelation temperature, an 82.99% recovery rate, noticeable shear thinning features, high self-supporting performance, and textural qualities when ink with 35 g maltitol and 30 g erythritol gave the best printing performance. This research serves as a foundation for the development of individualized, bespoke 3D printed gummies in the future.

Study on the mechanism of non-covalent interaction between rose anthocyanin extracts and whey protein isolate under different pH conditions.

The non-covalent interaction between anthocyanin and dietary protein had an impact on their physicochemical property. The purpose of this study was to study the non-covalent interaction mechanism between rose anthocyanin extract (RAEs) and whey protein isolate (WPI), and further compare the interaction mechanism with pure anthocyanin (PC) and WPI. At pH 3.0 and pH 7.0, RAEs and WPI had non-covalent interactions in the two systems with two types of unequal and mutually influencing binding sites, and the interaction forces were both hydrogen bonds and van der Waals forces. Interestingly, PC and WPI also had non-covalent interactions in both systems, the number of which binding sites was about one type, and the forces were hydrogen bonds and van der Waals forces. In addition, a variety of spectral combination techniques indicated that RAEs and PC caused similar changes in the secondary structure of WPI.

Angiotensin-Converting Enzyme (ACE) Inhibitory Activity and Mechanism Analysis of N-(1-Deoxy-d-fructos-1-yl)-histidine (Fru-His), a Food-Derived Amadori Compound.

N-(1-Deoxy-d-fructos-1-yl)-histidine (Fru-His), one of the Amadori compounds, widely presents in processed foods, and its potential functional activities have attracted extensive attention in recent years. In this work, the angiotensin-converting enzyme (ACE) inhibitory activity and mechanism of Fru-His were investigated. The IC50 value of Fru-His was 0.150 ± 0.019 mM, and there was no obvious degradation of Fru-His after digestion simulation, showing that Fru-His has good ACE inhibition and digestive stability. Fru-His was a competitive inhibitor according to the enzyme inhibition kinetic analysis. The interaction between ACE and Fru-His occurred spontaneously mainly through hydrogen bonding, and the process was accompanied by fluorescence quenching and the alteration of the secondary structure of ACE. The molecular docking data supported the above results. Fru-His was attached to ACE's S1 active pocket through hydrogen bonds and interacted with zinc ions in active sites. The present study demonstrates that food-derived Fru-His has the potential to relieve hypertension.

An active and pH-responsive film developed by sodium carboxymethyl cellulose/polyvinyl alcohol doped with rose anthocyanin extracts.

Many anthocyanins were used in active and pH-responsive packaging. The purpose of the study was to prepare an active and pH-responsive sensitive film based on sodium carboxymethyl cellulose/polyvinyl alcohol (CPVA) by a casting process, which contained rose anthocyanin extracts (RAEs) to monitor the freshness of pork. The concentration of RAEs had an important influence on the physicochemical property of RAEs-CPVA films, especially excellent anti-oxidation and light barrier properties. Importantly, the 160-RAEs-CPVA film had a strong response to pH, showing different color at different pHs. Furthermore, when monitoring the freshness of pork stored at 25 °C, the light green color of the 160-RAEs-CPVA film indicated that the freshness of the pork was higher, while the dark green and orange appearance indicated that the pork was spoiled. Therefore, 160-RAEs-CPVA film can be used as a smart indicator for freshness monitoring of pork.