Hexabromocyclododecanes in soils, plants, and sediments from Svalbard, Arctic: Levels, isomer profiles, chiral signatures, and potential sources.

This study investigated the occurrence, stereoisomeric behavior, and potential sources of hexabromocyclododecanes (HBCDs) in topsoil and terrestrial vegetation from Svalbard and ocean sediment samples from Kongsfjorden, an open fjord on the west coast of Spitsbergen. The mean levels of total concentrations (Σ3HBCDs) were comparable to those in other remote regions and were lower than those in source regions. Elevated proportions of α-HBCD with an average of 41% in the terrestrial samples and 25% in ocean sediments compared to those in commercial products (10-13% for α-HBCD) were observed, implying isomerization from γ- to α-HBCD in the Arctic environment. In addition, the extensive deviations of enantiomeric fractions (EFs) from the racemic values reflected the effect of biotransformation on HBCD accumulation. Linear correlation analysis, redundancy analysis, and back-trajectory were combined to infer possible HBCD sources, and the results showed the important role of global production and long-range environmental transport (LRET) for the entry of HBCDs into the Arctic at an early stage. To the best of our knowledge, this study represents the first report on the diastereoisomer- and enantiomer-specific profiles of HBCDs in the Arctic terrestrial environment and sheds light on the transport pathways and environmental fate for more effective risk management related to HBCDs in remote regions.

Decoding Active Sites for Highly Efficient Semihydrogenation of Acetylene in Palladium-Copper Nanoalloys.

Accurately decoding the three-dimensional atomic structure of surface active sites is essential yet challenging for a rational catalyst design. Here, we used comprehensive techniques combining the pair distribution function and reverse Monte Carlo simulation to reveal the surficial distribution of Pd active sites and adjacent coordination environment in palladium-copper nanoalloys. After the fine-tuning of the atomic arrangement, excellent catalytic performance with 98% ethylene selectivity at complete acetylene conversion was obtained in the Pd34Cu66 nanocatalysts, outperforming most of the reported advanced catalysts. The quantitative deciphering shows a large number of active sites with a Pd-Pd coordination number of 3 distributed on the surface of Pd34Cu66 nanoalloys, which play a decisive role in highly efficient semihydrogenation. This finding not only opens the way for guiding the precise design of bimetal nanocatalysts from atomic-level insight but also provides a method to resolve the spatial structure of active sites.

Identification of Chronic Pancreatitis Associated microRNAs and Genes for the Diagnosis of Pancreatic Cancer.

OBJECTIVE: The timely identification of both malignant and nonmalignant pancreatic lesions has the potential to significantly enhance prognosis and implement risk management strategies across various levels. microRNAs (miRs) and their corresponding targets play a crucial role in the development of pancreatic lesions and can serve as valuable diagnostic and therapeutic targets. The objective of our study was to investigate potential diagnostic markers that can effectively differentiate between malignant and nonmalignant pancreatic lesions. METHODS: Gene Expression Omnibus (GEO) database with GSE24279 dataset was utilized to screen differentially expressed miRNAs (DEMs). We utilized the TargetScanHuman database to predict the target genes associated with hsa-miR-150-3p, hsa-miR-150-5p, and hsa-miR-214-3p. Furthermore, a cohort comprising healthy individuals (n = 52), chronic pancreatitis (CP; n = 34), and pancreatic adenocarcinoma (PAAD; n = 53) patients was recruited to ascertain the levels of plasma markers. RESULTS: We identified 3 miRNAs (hsa-miR-150-3p, hsa-miR-150-5p, and hsa-miR-214-3p) and 2 proteins (PCDH1 and AMN) as potential diagnostic markers for distinguishing between CP and PAAD. The area under the curve (AUC) values for all markers exceeded .800. Notably, a combination of plasma PCDH1 and AMN demonstrated excellent diagnostic performance (AUC = .921; 95% CI: .866-.977; sensitivity = .792; specificity = .941) in discriminating between CP and PAAD. In addition, the model of hsa-miR-150-3p, hsa-miR-150-5p, and hsa-miR-214-3p yielded an AUC of .928, sensitivity of .830, and specificity of .912, respectively. CONCLUSION: Plasma levels of miRNAs (hsa-miR-150-3p, hsa-miR-150-5p, and hsa-miR-214-3p) and their corresponding targets (PCDH1 and AMN) hold promise as potential biomarkers for predicting PAAD in patients with CP.

Distribution patterns and origins of organophosphate esters in soils from different climate systems on the Tibetan Plateau.

Organophosphate esters (OPEs) are extensively applied in various materials as flame retardants and plasticizers, and have high biological toxicity. OPEs are detected worldwide, even in distant polar regions and the Tibetan Plateau (TP). However, few studies have been performed to evaluate the distribution patterns and origins of OPEs in different climate systems on the TP. This study investigated the distribution characteristics, possible sources, and ecological risks of OPEs in soils from the different climate systems on the TP and its surroundings. The total concentrations of OPEs in soil varied from 468 to 17,451 pg g-1 dry weight, with greater concentrations in southeast Tibet (monsoon zone), followed by Qinghai (transition zone) and, finally, southern Xingjiang (westerly zone). OPE composition profiles also differed among the three areas with tri-n-butyl phosphate dominant in the westerly zone and tris(2-butoxyethyl) phosphate dominant in the Indian monsoon zone. Correlations between different compounds and altitude, soil organic carbon, or longitude varied in different climate zones, indicating that OPE distribution originates from both long-range atmospheric transport and local emissions. Ecological risk assessment showed that tris(2-chloroethyl) phosphate and tri-phenyl phosphate exhibited medium risks in soil at several sites in southeast Tibet. Considering the sensitivity and vulnerability of TP ecosystems to anthropogenic pollutants, the ecological risks potentially caused by OPEs in this region should be further assessed.

Sea Anemone-Inspired Slippery Liquid-Infused Porous Surface (SLIPS) with Bionic Cilia for Responsive 4D Antifouling.

The formation process of biofouling is actually a 4D process with both spatial and temporal dimensions. However, most traditional antifouling coatings, including slippery liquid-infused porous surface (SLIPS), are limited to performing antifouling process in the 2D coating plane. Herein, inspired by the defensive behavior of sea anemones' wielding toxic tentacles, a "4D SLIPS" (FSLIPS) is constructed with biomimetic cilia via a magnetic field self-assembly method for antifouling. The bionic cilia move in 3D space driven by an external magnetic field, thereby preventing the attachment of microorganisms. The FSLIPS releases the gaseous antifoulant (nitric oxide) at 1D time in response to light, thereby achieving a controllable biocide effect on microorganisms. The FSLIPS regulates the movement of cilia via the external magnetic field, and controls the release of NO overtime via the light response, so as to adjust the antifouling modes on demand during the day or night. The light/magnetic response mechanism endow the FSLIPS with the ability to adjust the antifouling effect in the 4D dimension of 1D time and 3D space, effectively realizing the intelligence, multi-dimensionality and precision of the antifouling process.

Soil's Hidden Power: The Stable Soil Organic Carbon Pool Controls the Burden of Persistent Organic Pollutants in Background Soils.

Persistent organic pollutants (POPs) tend to accumulate in cold regions by cold condensation and global distillation. Soil organic matter is the main storage compartment for POPs in terrestrial ecosystems due to deposition and repeated air-surface exchange processes. Here, physicochemical properties and environmental factors were investigated for their role in influencing POPs accumulation in soils of the Tibetan Plateau and Antarctic and Arctic regions. The results showed that the soil burden of most POPs was closely coupled to stable mineral-associated organic carbon (MAOC). Combining the proportion of MAOC and physicochemical properties can explain much of the soil distribution characteristics of the POPs. The background levels of POPs were estimated in conjunction with the global soil database. It led to the proposition that the stable soil carbon pools are key controlling factors affecting the ultimate global distribution of POPs, so that the dynamic cycling of soil carbon acts to counteract the cold-trapping effects. In the future, soil carbon pool composition should be fully considered in a multimedia environmental model of POPs, and the risk of secondary release of POPs in soils under conditions such as climate change can be further assessed with soil organic carbon models.

ß-Sitosterol Reduces the Content of Triglyceride and Cholesterol in a High-Fat Diet-Induced Non-Alcoholic Fatty Liver Disease Zebrafish (Danio rerio) Model.

OBJECTIVE: Non-alcoholic fatty liver disease (NAFLD) is strongly associated with hyperlipidemia, which is closely related to high levels of sugar and fat. ß-sitosterol is a natural product with significant hypolipidemic and cholesterol-lowering effects. However, the underlying mechanism of its action on aquatic products is not completely understood. METHODS: A high-fat diet (HFD)-induced NAFLD zebrafish model was successfully established, and the anti-hyperlipidemic effect and potential mechanism of ß-sitosterol were studied using oil red O staining, filipin staining, and lipid metabolomics. RESULTS: ß-sitosterol significantly reduced the accumulation of triglyceride, glucose, and cholesterol in the zebrafish model. Kyoto Encyclopedia of Genes and Genomes (KEGG) pathway analysis showed that differential lipid molecules in ß-sitosterol mainly regulated the lipid metabolism and signal transduction function of the zebrafish model. ß-sitosterol mainly affected steroid biosynthesis and steroid hormone biosynthesis in the zebrafish model. Compared with the HFD group, the addition of 500 mg/100 g of ß-sitosterol significantly inhibited the expression of Ppar-γ and Rxr-α in the zebrafish model by at least 50% and 25%, respectively. CONCLUSIONS: ß-sitosterol can reduce lipid accumulation in the zebrafish model of NAFLD by regulating lipid metabolism and signal transduction and inhibiting adipogenesis and lipid storage.

A nomogram for predicting the infectious disease-specific health literacy of older adults in China.

PURPOSE: To identify the predictors of infectious disease-specific health literacy (IDSHL), and establish an easy-to-apply nomogram to predict the IDSHL of older adults. METHODS: This cross-sectional study included 380 older adults who completed the IDSHL, self-rated health, sociodemographic and other questionnaires. Logistic regression was used to identify the IDSHL predictors. Nomogram was used to construct a predictive model. RESULTS: Up to 70.1% of older adults had limited IDSHL. Age, education, place of residence, self-rated health, and Internet access were the important influencing factors of IDSHL. The established nomogram model showed high accuracy (receiver operating characteristic curve: 0.848). CONCLUSIONS: The IDSHL of Chinese older adults was significantly deficient. The constructed nomogram is an intuitive tool for IDSHL prediction that can not only contribute towards rapid screening of high-risk older adults with limited IDSHL but also provide guidance for healthcare providers to develop prevention strategies for infectious diseases.

Disorder-Broadened Phase Boundary with Enhanced Amorphous Superconductivity in Pressurized In2Te5.

As an empirical tool in materials science and engineering, the iconic phase diagram owes its robustness and practicality to the topological characteristics rooted in the celebrated Gibbs phase law free variables (F) = components (C) - phases (P) + 2. When crossing the phase diagram boundary, the structure transition occurs abruptly, bringing about an instantaneous change in physical properties and limited controllability on the boundaries (F = 1). Here, the sharp phase boundary is expanded to an amorphous transition region (F = 2) by partially disrupting the long-range translational symmetry, leading to a sequential crystalline-amorphous-crystalline (CAC) transition in a pressurized In2Te5 single crystal. Through detailed in situ synchrotron diffraction, it is elucidated that the phase transition stems from the rotation of immobile blocks [In2Te2]2+, linked by hinge-like [Te3]2- trimers. Remarkably, within the amorphous region, the amorphous phase demonstrates a notable 25% increase of the superconducting transition temperature (Tc), while the carrier concentration remains relatively constant. Furthermore, a theoretical framework is proposed revealing that the unconventional boost in amorphous superconductivity might be attributed to an intensified electron correlation, triggered by a disorder-augmented multifractal behavior. These findings underscore the potential of disorder and prompt further exploration of unforeseen phenomena on the phase boundaries.

Reconfigurable optoelectronic transistors for multimodal recognition.

Biological nervous system outperforms in both dynamic and static information perception due to their capability to integrate the sensing, memory and processing functions. Reconfigurable neuromorphic transistors, which can be used to emulate different types of biological analogues in a single device, are important for creating compact and efficient neuromorphic computing networks, but their design remains challenging due to the need for opposing physical mechanisms to achieve different functions. Here we report a neuromorphic electrolyte-gated transistor that can be reconfigured to perform physical reservoir and synaptic functions. The device exhibits dynamics with tunable time-scales under optical and electrical stimuli. The nonlinear volatile property is suitable for reservoir computing, which can be used for multimodal pre-processing. The nonvolatility and programmability of the device through ion insertion/extraction achieved via electrolyte gating, which are required to realize synaptic functions, are verified. The device's superior performance in mimicking human perception of dynamic and static multisensory information based on the reconfigurable neuromorphic functions is also demonstrated. The present study provides an exciting paradigm for the realization of multimodal reconfigurable devices and opens an avenue for mimicking biological multisensory fusion.

Controlled Synthesis of Unconventional Phase Alloy Nanobranches for Highly Selective Electrocatalytic Nitrite Reduction to Ammonia.

The controlled synthesis of metal nanomaterials with unconventional phases is of significant importance to develop high-performance catalysts for various applications. However, it remains challenging to modulate the atomic arrangements of metal nanomaterials, especially the alloy nanostructures that involve different metals with distinct redox potentials. Here we report the general one-pot synthesis of IrNi, IrRhNi and IrFeNi alloy nanobranches with unconventional hexagonal close-packed (hcp) phase. Notably, the as-synthesized hcp IrNi nanobranches demonstrate excellent catalytic performance towards electrochemical nitrite reduction (NO2RR), with superior NH3 Faradaic efficiency and yield rate of 98.2% and 34.6 mg h-1 mgcat-1 (75.5 mg h-1 mgIr-1) at 0 and -0.1 V (vs reversible hydrogen electrode), respectively. Ex/in-situ characterizations and theoretical calculations reveal that the Ir-Ni interactions within hcp IrNi alloy improve electron transfer to benefit both nitrite activation and active hydrogen generation, leading to a stronger reaction trend of NO2RR by greatly reducing energy barriers of rate-determining step.

Pearl-Inspired Intelligent Marine Hetero Nanocomposite Coating Based on "Brick&Mortar" Strategy: Anticorrosion Durability and Switchable Antifouling.

Corrosion activities and biofouling pose significant challenges for marine facilities, resulting in substantial economic losses. Inspired by the "brick&mortar" structure of pearls, a novel nanocomposite coating (Pun-HJTx) with long-lasting anticorrosion and intelligent antifouling modes is fabricated by integrating a compatible MoS2/MXene heterostructure as the "brick" into a polyurea-modified PDMS (Pun) acting as "mortar." Notably, the presence of multiple hydrogen bonds within the coating effectively reduces the pinholes resulted from solution volatilizing. In the dark, where fouling adhesion and microbial corrosion activities are weakened, the MoS2/MXene plays a role in contact bactericidal action. Conversely, during daylight when fouling adhesion and microbial corrosion activities intensify, the coating releases reactive oxygen species (such as hydroxyl radicals and superoxide ions) to counteract fouling adhesion. Additionally, the coating exhibits multisource self-healing performance under heated or exposed to light (maximum self-healing rate can reach 99.46%) and proves efficient self-cleaning performance and adhesion strength (>2.0 Mpa), making it highly suitable for various practical marine applications. Furthermore, the outstanding performance of the Pun-HJT1 is maintained for ≈180 days in real-world marine conditions, which proving its practicality and feasibility in real shallow sea environments.

Assessment of interactions between elemental carbon and metals in black carbon: Hydroxyl radical generation and glutathione depletion.

Elemental carbon (EC) and metals are two important parts of atmospheric black carbon (BC). However, little information is available regarding the interaction between them and its impacts on the reactive oxygen species (ROS) formation and physiological antioxidants depletion. In this study, we chose six most frequently detected metals (Cu(Ⅱ), Fe(Ⅲ), Mn(Ⅱ), Cr(Ⅲ), Pb(Ⅱ) and Zn(Ⅱ)) in BC and examined their interactions with EC in the ROS generation and glutathione (GSH) oxidation. Results showed that only Cu(Ⅱ) and EC synergically promoted the GSH oxidation and hydroxyl radical (•OH) generation. Other five metals had negligible effects on the GSH oxidation regardless of the presence or absence of EC. The synergistic interaction between Cu(Ⅱ) and EC could be attributed to the superior electrical conductivity of EC. In the process, EC transferred electrons from the adjacent GSH to Cu(Ⅱ) through its graphitic carbon framework to yield Cu(Ⅰ) and GSH radical. Cu(Ⅰ) further reacted with dioxygen to generate •OH, which eventually led to the oxidation of GSH. Our results revealed a new driving force inducing the ROS formation and GSH depletion as well as provided novel insights into the risk assessment of BC.

[Analysis of a patient with Retinitis pigmentosa due to a novel variant of IMPDH1 gene].

OBJECTIVE: To explore the genetic basis for a patient with autosomal dominant retinitis pigmentosa (RP). METHODS: A male patient with RP treated at Gansu Provincial Maternal and Child Health Care Hospital in September 2019 was selected as the study subject. Clinical data was collected. Peripheral blood samples of the patient and his parents were subjected to whole exome sequencing (WES). Candidate variant was validated by Sanger sequencing and bioinformatic analysis. RESULTS: The patient, a 29-year-old male, developed night blindness, amblyopia, visual field defects and optic disc abnormalities since childhood. Gene sequencing revealed that he has harbored a heterozygous c.942G>C (p.Lys314Asn) variant of the IMPDH1 gene, which was inherited from his mother, whilst his father was of the wild type. Based on the guidelines from the American College of Medical Genetics and Genomics, the c.942G>C variant was predicted as likely pathogenic (PM1+PM2_Supporting+PP3+PP1). CONCLUSION: The c.942G>C (p.Lys314Asn) variant in the IMPDH1 gene probably underlay the RP in this patient.

Robust, Self-Healing, and Multi-Use Poly(Urethane-Urea-Imide) Elastomer as a Durable Adhesive for Thermal Interface Materials.

Currently, research on thermal interface materials (TIMs) is primarily focused on enhancing thermal conductivity. However, strong adhesion and multifunctionality are also important characteristics for TIMs when pursing more stable interface heat conduction. Herein, a novel poly(urethane-urea-imide) (PUUI) elastomer containing abundant dynamic hydrogen bonds network and reversible disulfide linkages is successfully synthesized for application as a TIM matrix. The PUUI can self-adapt to the metal substrate surface at moderate temperatures (80 °C) and demonstrates a high adhesion strength of up to 7.39 MPa on aluminum substrates attributed its noncovalent interactions and strong intrinsic cohesion. Additionally, the PUUI displays efficient self-healing capability, which can restore 94% of its original mechanical properties after self-healing for 6 h at room temperature. Furthermore, PUUI composited with aluminum nitride and liquid metal hybrid fillers demonstrates a high thermal conductivity of 3.87 W m-1 K-1 while maintaining remarkable self-healing capability and adhesion. When used as an adhesive-type TIM, it achieves a low thermal contact resistance of 22.1 mm2 K W-1 at zero pressure, only 16.7% of that of commercial thermal pads. This study is expected to break the current research paradigm of TIMs and offers new insights for the development of advanced, reliable, and sustainable TIMs.

[Clinical and genetic analysis of two pedigrees affected with Carnitine-acylcarnitine translocase deficiency due to variant of SLC25A20 gene].

OBJECTIVE: To analyze the clinical phenotype and genotypes of two children with Carnitine-acylcarnitine translocase deficiency (CACTD). METHODS: Two children diagnosed with CACTD at the Gansu Provincial Maternal and Child Health Care Hospital respectively on January 3 and November 19, 2018 were selected as the study subjects. Trio-whole exome sequencing (trio-WES) was carried out, and candidate variants were validated through Sanger sequencing and pathogenicity analysis. RESULTS: Both children were males and had manifested mainly with hypoglycemia. Trio-WES and Sanger sequencing showed that child 1 had harbored compound heterozygous variants of the SLC25A20 gene, namely c.49G>C (p.Gly17Arg) and c.106-2A>G, which were inherited from his father and mother, respectively. Child 2 had harbored homozygous c.199-10T>G variants of the SLC25A20 gene, which were inherited from both of his parents. Among these, the c.106-2A>G and c.49G>C variants were unreported previously. Based on the guidelines from the American College of Medical Genetics and Genomics (ACMG), the c.49G>C (p.Gly17Arg), c.106-2A>G, and c.199-10T>G variants were classified as likely pathogenic (PM2_supporting+PP3+PM3_strong+PP4), pathogenic (PVS1+PM2_supporting+PM5+PP3), and pathogenic (PVS1+PM2_supporting+PP3+PP5), respectively. CONCLUSION: Combined with their clinical phenotype and genetic analysis, both children were diagnosed with CACTD. Above finding has provided a basis for their treatment as well as genetic counseling and prenatal diagnosis for their families.

Fatigue Behavior and Fracture Surface Analysis of Corroded High-Strength Bridge Cable Wires.

Bridge cable wires suffer from alternating stress and environmental erosion, leading to premature failure prior to its design life. This paper investigates the fatigue and mechanical behaviors of corroded bridge cable wires with a zinc-aluminum (Zn-Al) alloy coating. Based on the salt spray corrosion test and microstructure analysis, the anti-corrosion resistance and corrosion appearance characteristics of the Zn-Al alloy coating and galvanized coating were investigated. The Zn-Al alloy coating was superior in resistance to corrosion fatigue for the improvement in toughness and the generation of anti-corrosion Zn-Al and Fe-Zn-Al phases. Equations of the accelerated corrosion depth of the steel wires had been regressed to roughly estimate the corrosion life of the Zn-Al alloy coating, which can reach 29.1 years with a thickness of 70 µm. The fatigue and mechanical properties of the bare wires after the salt spray test were further studied based on tensile tests and fatigue tests. The fatigue properties of the bridge cable wire would decrease with the corrosion degree due to the deterioration and embrittlement of materials, where ductility characterized by the elongation rate was the most affected. Fracture surfaces of the wires were captured and analyzed based on a method for recognizing graphical contours. Insufficient fatigue life may occur in the steel wires after corrosion and increase with the degree of corrosion. The pit depth logarithmically weakened the fatigue life of steel wires for the weakening of fatigue toughness and the bearing area. The flat fracture was more common with a single fatigue source, while multiple fatigue sources led to step-like fractures for the generation of multiple dispersed crack propagation regions. Corrosion fatigue was more sensitive to the existence of fatigue sources than the reduction. Multiple initiation sources significantly reduced the fatigue life due to the cracking facilitation of the joint effect of multiple pits. The electrochemical reactions of corrosion can lead to material embrittlement and a reducing effect on the fracture toughness of the steel wires.

The genetic basis and process of inbreeding depression in an elite hybrid rice.

Inbreeding depression refers to the reduced performance arising from increased homozygosity, a phenomenon that is the reverse of heterosis and exists among plants and animals. As a natural self-pollinated crop with strong heterosis, the mechanism of inbreeding depression in rice is largely unknown. To understand the genetic basis of inbreeding depression, we constructed a successive inbreeding population from the F2 to F4 generation and observed inbreeding depression of all heterotic traits in the progeny along with the decay of heterozygosity in each generation. The expected depression effect was largely explained by 13 QTLs showing dominant effects for spikelets per panicle, 11 for primary branches, and 12 for secondary branches, and these loci constitute the main correlation between heterosis and inbreeding depression. However, the genetic basis of inbreeding depression is also distinct from that of heterosis, such that a biased transmission ratio of alleles for QTLs with either dominant or additive effects in four segregation distortion regions would result in minor effects in expected depression. Noticeably, two-locus interactions may change the extent and direction of the depression effects of the target loci, and overall interactions would promote inbreeding depression among generations. Using an F2:3 variation population, the actual performance of the loci showing expected depression was evaluated considering the heterozygosity decay in the background after inbreeding. We found inconsistent or various degrees of background depression from the F2 to F3 generation assuming different genotypes of the target locus, which may affect the actual depression effect of the locus due to epistasis. The results suggest that the genetic architecture of inbreeding depression and heterosis is closely linked but also differs in their intrinsic mechanisms, which expand our understanding of the whole-genome architecture of inbreeding depression.

[Clinical and molecular genetic analysis of a child with comorbid 16p11.2 microdeletion syndrome and Rett syndrome].

OBJECTIVE: To explore the genetic characteristics of a child with comorbid 16p11.2 microdeletion syndrome and Rett syndrome (RTT). METHODS: A male infant who was admitted to Gansu Provincial Maternity and Child Health Care Hospital in May 2020 was selected as the study subject. Clinical data of the infant was collected. Genomic DNA was extracted from peripheral blood samples from the infant and his parents, and subjected to whole exome sequencing (WES). Candidate variant was verified by Sanger sequencing. RESULTS: The patient, a 4-day-old male infant, had presented with poor response, poor intake, feeding difficulties, and deceased at 8 months after birth. WES revealed that he has harbored a 0.643 Mb deletion in the 16p11.2 region, which encompassed key genes of the 16p11.2 microdeletion syndrome such as ALDOA, CORO1A, KIFF22, PRRT2 and TBX6. His father has carried the same deletion, but was phenotypically normal. The deletion was predicted to be pathogenic. The child was also found to harbor a maternally derived c.763C>T (p.R255X) hemizygous variant of the MECP2 gene, which was also predicted to be pathogenic (PVS1+PS4+PM2_Supporting). CONCLUSION: The 16p11.2 deletion and the MECP2: c.763C>T (p.R255X) variant probably underlay the pathogenesis in this infant.

Ferroelastically protected reversible orthorhombic to monoclinic-like phase transition in ZrO2 nanocrystals.

Robust ferroelectricity in nanoscale fluorite oxide-based thin films enables promising applications in silicon-compatible non-volatile memories and logic devices. However, the polar orthorhombic (O) phase of fluorite oxides is a metastable phase that is prone to transforming into the ground-state non-polar monoclinic (M) phase, leading to macroscopic ferroelectric degradation. Here we investigate the reversibility of the O-M phase transition in ZrO2 nanocrystals via in situ visualization of the martensitic transformation at the atomic scale. We reveal that the reversible shear deformation pathway from the O phase to the monoclinic-like (M') state, a compressive-strained M phase, is protected by 90° ferroelectric-ferroelastic switching. Nevertheless, as the M' state gradually accumulates localized strain, a critical tensile strain can pin the ferroelastic domain, resulting in an irreversible M'-M strain relaxation and the loss of ferroelectricity. These findings demonstrate the key role of ferroelastic switching in the reversibility of phase transition and also provide a tensile-strain threshold for stabilizing the metastable ferroelectric phase in fluorite oxide thin films.