Mechanocatalytic Hydrogen Generation in Centrosymmetric Barium Dititanate.

Novel phase of nano materials that break the traditional structural constraints are highly desirable, particularly in the field of mechanocatalysis, offering versatile applications ranging from energy to medical diagnosis and treatment. In this work, a distinct layered barium dititanate (BaTi2O5) nanocrystals using a pH-modulated hydrothermal method is successfully synthesized. These nanocrystals exhibit outstanding hydrogen generation capability (1160 µmol g-1 h-1 in pure water) and demonstrate remarkable performance in organic dye degradation using ultrasonication. The crystal structure of this newly discovered BaTi2O5 phase, is determined by a combination of synchrotron Powder Diffraction refinement and X-ray adsorption techniques, including X-ray Absorption Near Edge Structure (XANES) and Extended X-ray Absorption Fine Structure (EXAFS). Density Functional Theory calculations revealed that the newly-discovered BaTi2O5 phase demonstrates dipole moments along the z-axis, distributed in an antiparallel direction within a single unit cell. These inherent dipoles induce a surface polarization and a ferroelectric-flexoelectric response under mechanical stimuli when the materials go to nano dimension. With a band alignment well-suitable for hydrogen and reactive oxygen species generation, this BaTi2O5 phase demonstrates promising potential for Mechanocatalysis. The discovery of this distinct phase not only enriches the material candidates for mechanocatalysis but also provides valuable insights.

Identification and quantification of goat milk adulteration using mid-infrared spectroscopy and chemometrics.

The fraudulent adulteration of goat milk with cheaper and more available milk of other species such as cow milk is occurrence. The aims of the present study were to investigate the effect of goat milk adulteration with cow milk on the mid-infrared (MIR) spectrum and further evaluate the potential of MIR spectroscopy to identify and quantify the goat milk adulterated. Goat milk was adulterated with cow milk at 5 different levels including 10%, 20%, 30%, 40%, and 50%. Statistical analysis showed that the adulteration had significant effect on the majority of the spectral wavenumbers. Then, the spectrum was preprocessed with standard normal variate (SNV), multiplicative scattering correction (MSC), Savitzky-Golay smoothing (SG), SG plus SNV, and SG plus MSC, and partial least squares discriminant analysis (PLS-DA) and partial least squares regression (PLSR) were used to establish classification and regression models, respectively. PLS-DA models obtained good results with all the sensitivity and specificity over 0.96 in the cross-validation set. Regression models using raw spectrum obtained the best result, with coefficient of determination (R2), root mean square error (RMSE), and the ratio of performance to deviation (RPD) of cross-validation set were 0.98, 2.01, and 8.49, respectively. The results preliminarily indicate that the MIR spectroscopy is an effective technique to detect the goat milk adulteration with cow milk. In future, milk samples from different origins and different breeds of goats and cows should be collected, and more sophisticated adulteration at low levels should be further studied to explore the potential and effectiveness of milk mid-infrared spectroscopy and chemometrics.

Ultra-Weak Polarization-Strain Coupling Effect Boosts Capacitive Energy Storage.

In pulse power systems, multilayer ceramic capacitors (MLCCs) encounter significant challenges due to the heightened loading electric field (E), which can lead to fatigue damage and ultrasonic concussion caused by electrostrictive strain. To address these issues, an innovative strategy focused on achieving an ultra-weak polarization-strain coupling effect is proposed, which effectively reduces strain in MLCCs. Remarkably, an ultra-low electrostrictive coefficient (Q33) of 0.012 m4 C-2 is achieved in the composition 0.55(Bi0.5Na0.5)TiO3-0.45Pb(Mg1/3Nb2/3)O3, resulting in a significantly reduced strain of 0.118% at 330 kV cm-1. At the atomic scale, the local structural heterogeneity leads to an expanded and loose lattice structure, providing ample space for large ionic displacement polarization instead of lattice stretching when subjected to the applied E. This unique behavior not only promotes energy storage performance (ESP) but also accounts for the observed ultra-low Q33 and strain. Consequently, the MLCC device exhibits an impressive energy storage density of 14.6 J cm-3 and an ultrahigh efficiency of 93% at 720 kV cm-1. Furthermore, the superior ESP of the MLCC demonstrates excellent fatigue resistance and temperature stability, making it a promising solution for practical applications. Overall, this pivotal strategy offers a cost-effective solution for state-of-the-art MLCCs with ultra-low strain-vibration in pulse power systems.

High-temperature capacitive energy stroage in polymer nanocomposites through nanoconfinement.

Polymeric-based dielectric materials hold great potential as energy storage media in electrostatic capacitors. However, the inferior thermal resistance of polymers leads to severely degraded dielectric energy storage capabilities at elevated temperatures, limiting their applications in harsh environments. Here we present a flexible laminated polymer nanocomposite where the polymer component is confined at the nanoscale, achieving improved thermal-mechanical-electrical stability within the resulting nanocomposite. The nanolaminate, consisting of nanoconfined polyetherimide (PEI) polymer sandwiched between solid Al2O3 layers, exhibits a high energy density of 18.9 J/cm3 with a high energy efficiency of ~ 91% at elevated temperature of 200°C. Our work demonstrates that nanoconfinement of PEI polymer results in reduced diffusion coefficient and constrained thermal dynamics, leading to a remarkable increase of 37°C in glass-transition temperature compared to bulk PEI polymer. The combined effects of nanoconfinement and interfacial trapping within the nanolaminates synergistically contribute to improved electrical breakdown strength and enhanced energy storage performance across temperature range up to 250°C. By utilizing the flexible ultrathin nanolaminate on curved surfaces such as thin metal wires, we introduce an innovative concept that enables the creation of a highly efficient and compact metal-wired capacitor, achieving substantial capacitance despite the minimal device volume.

Rapid detection and quantification of melamine, urea, sucrose, water, and milk powder adulteration in pasteurized milk using Fourier transform infrared (FTIR) spectroscopy coupled with modern statistical machine learning algorithms.

There is an evident requirement for a rapid, efficient, and simple method to screen the authenticity of milk products in the market. Fourier transform infrared (FTIR) spectroscopy stands out as a promising solution. This work employed FTIR spectroscopy and modern statistical machine learning algorithms for the identification and quantification of pasteurized milk adulteration. Comparative results demonstrate modern statistical machine learning algorithms will improve the ability of FTIR spectroscopy to predict milk adulteration compared to partial least square (PLS). To discern the types of substances utilized in milk adulteration, a top-performing multiclassification model was established using multi-layer perceptron (MLP) algorithm, delivering an impressive prediction accuracy of 97.4 %. For quantification purposes, bayesian regularized neural networks (BRNN) provided the best results for the determination of both melamine, urea and milk powder adulteration, while extreme gradient boosting (XGB) and projection pursuit regression (PPR) gave better results in predicting sucrose and water adulteration levels, respectively. The regression models provided suitable predictive accuracy with the ratio of performance to deviation (RPD) values higher than 3. The proposed methodology proved to be a cost-effective and fast tool for screening the authenticity of pasteurized milk in the market.

Defect dipole stretching enables ultrahigh electrostrain.

Piezoelectric actuators have been extensively utilized as micro-displacement devices because of their advantages of large output displacement, high sensitivity, and immunity to electromagnetic interference. Here, we propose a straightforward approach to design <110>-oriented defect dipoles by introducing A-site vacancies and oxygen vacancies in (K0.48Na0.52)0.99NbO2.995 ceramics. As a result, we achieve ultrahigh electrostrains of 0.7% at 20 kV cm-1 (with an effective piezoelectric strain coefficient d33* = 3500 pm V-1), outperforming the performance of existing piezoelectric ceramics at the same driving field. The exceptional electrostrain is primarily attributed to the large stretching of defect dipoles when subjected to an applied electric field, a phenomenon that has been experimentally confirmed. Moreover, the strong interaction between these defect dipoles and <110> spontaneous polarizations plays a critical role in minimizing hysteresis and ensuring excellent fatigue resistance. Our findings present a practical and effective strategy for developing high-performance piezoelectric materials tailored for advanced actuator applications.

Partitioning polar-slush strategy in relaxors leads to large energy-storage capability.

Relaxor ferroelectric (RFE) films are promising energy-storage candidates for miniaturizing high-power electronic systems, which is credited to their high energy density (Ue) and efficiency. However, advancing their Ue beyond 200 joules per cubic centimeter is challenging, limiting their potential for next-generation energy-storage devices. We implemented a partitioning polar-slush strategy in RFEs to push the boundary of Ue. Guided by phase-field simulations, we designed and fabricated high-performance Bi(Mg0.5Ti0.5)O3-SrTiO3-based RFE films with isolated slush-like polar clusters, which were realized through suppression of the nonpolar cubic matrix and introduction of highly insulating networks. The simultaneous enhancement of the reversible polarization and breakdown strength leads to a Ue of 202 joules per cubic centimeter with a high efficiency of ~79%. The proposed strategy provides a design freedom for next-generation high-performance dielectrics.

Exploring transformation of dissolved organic matters and dissolved organic nitrogen in full-scale anammox wastewater treatment: Temperature and microbial roles.

Variation of dissolved organic matters (DOM) in mainstream anammox process has received limited attention. This study systematically characterized DOM and dissolved organic nitrogen (DON) in a full-scale mainstream anammox wastewater treatment plant (WWTP) using spectroscopy and Fourier transform-ion cyclotron resonance mass spectrometry. Roles of bacterial community structures related with temperatures on DOM and DON transformations were analyzed. Results indicated that the WWTP removed highly bioavailable, S-containing DOM while producing more unsaturated, aromatic, and N-containing DOM. Higher relative abundances of Proteobacteria and Chloroflexi at low temperature resulted in greater removal rates of proteins, SMP-like and humic acid-like substances. At high temperature, higher relative abundance of Actinobacteriota increased lignin production. Principal component analysis revealed that temperature significantly impacted DOM characteristics compared to DON. These findings are crucial for understanding DOM and DON transformation during mainstream anammox WWTP.

Electrical de-poling and re-poling of relaxor-PbTiO3 piezoelectric single crystals without heat treatment.

Re-poling of unexpected partially depoled piezoelectric materials conventionally needs to be first fully depoled through annealing above their Curie temperature to revive piezoelectric performances. Here, we investigated de-poling and re-poling of Pb(In1/2Nb1/2)O3-Pb(Mg1/3Nb2/3)O3-PbTiO3 single crystals under electric fields at room temperature. We found that alternating current electric fields with amplitudes near the coercive field at low frequencies (<10 Hz) can be employed to successfully depolarize poled crystals at room temperature. We also demonstrated a reversible polarization switching process with a relaxor-PbTiO3 single crystal ultrasound transducer without device performance degradations. This experimental observation is supported by phase-field simulation, showing that alternating current electric fields can readily induce de-poling at room temperature, while direct current electric fields induce a transient depoled state only within an uncontrollable short period of time. The findings suggest new strategies for unprecedented in-device tailoring of the polarization states of ferroelectric materials.

Optimizing high-temperature energy storage in tungsten bronze-structured ceramics via high-entropy strategy and bandgap engineering.

As a vital material utilized in energy storage capacitors, dielectric ceramics have widespread applications in high-power pulse devices. However, the development of dielectric ceramics with both high energy density and efficiency at high temperatures poses a significant challenge. In this study, we employ high-entropy strategy and band gap engineering to enhance the energy storage performance in tetragonal tungsten bronze-structured dielectric ceramics. The high-entropy strategy fosters cation disorder and disrupts long-range ordering, consequently regulating relaxation behavior. Simultaneously, the reduction in grain size, elevation of conductivity activation energy, and increase in band gap collectively bolster the breakdown electric strength. This cascade effect results in outstanding energy storage performance, ultimately achieving a recoverable energy density of 8.9 J cm-3 and an efficiency of 93% in Ba0.4Sr0.3Ca0.3Nb1.7Ta0.3O6 ceramics, which also exhibit superior temperature stability across a broad temperature range up to 180 °C and excellent cycling reliability up to 105. This research presents an effective method for designing tetragonal tungsten bronze dielectric ceramics with ultra-high comprehensive energy storage performance.

Deletion of GPR81 activates CREB/Smad7 pathway and alleviates liver fibrosis in mice.

BACKGROUND: Enhanced glycolysis is a crucial metabolic event that drives the development of liver fibrosis, but the molecular mechanisms have not been fully understood. Lactate is the endproduct of glycolysis, which has recently been identified as a bioactive metabolite binding to G-protein-coupled receptor 81 (GPR81). We then questioned whether GPR81 is implicated in the development of liver fibrosis. METHODS: The level of GPR81 was determined in mice with carbon tetrachloride (CCl4)-induced liver fibrosis and in transforming growth factor beta 1 (TGF-ß1)-activated hepatic stellate cells (HSCs) LX-2. To investigate the significance of GPR81 in liver fibrosis, wild-type (WT) and GPR81 knockout (KO) mice were exposed to CCl4, and then the degree of liver fibrosis was determined. In addition, the GPR81 agonist 3,5-dihydroxybenzoic acid (DHBA) was supplemented in CCl4-challenged mice and TGF-ß1-activated LX-2 cells to further investigate the pathological roles of GPR81 on HSCs activation. RESULTS: CCl4 exposure or TGF-ß1 stimulation significantly upregulated the expression of GPR81, while deletion of GPR81 alleviated CCl4-induced elevation of aminotransferase, production of pro-inflammatory cytokines, and deposition of collagen. Consistently, the production of TGF-ß1, the expression of alpha-smooth muscle actin (α-SMA) and collagen I (COL1A1), as well as the elevation of hydroxyproline were suppressed in GPR81 deficient mice. Supplementation with DHBA enhanced CCl4-induced liver fibrogenesis in WT mice but not in GPR81 KO mice. DHBA also promoted TGF-ß1-induced LX-2 activation. Mechanistically, GPR81 suppressed cAMP/CREB and then inhibited the expression of Smad7, a negative regulator of Smad3, which resulted in increased phosphorylation of Smad3 and enhanced activation of HSCs. CONCLUSION: GPR81 might be a detrimental factor that promotes the development of liver fibrosis by regulating CREB/Smad7 pathway.

Novel separate aeration self-circulating technology for continuous aerobic granular sludge process: Performance evaluation, hydrodynamic simulation and control strategy.

The continuous aerobic granular sludge (AGS) process is promising for upgrading existing wastewater treatment facilities. However, this approach is still challenging because of its complicated structure and operation. To address this issue, a novel separate aeration self-circulating technology (abbreviated as Zier) was proposed, which is promising for cultivating AGS by its outstanding upflow velocity and circulation multiplier (more than 30 m/h and 200, respectively). This study elaborated on the Zier reactor's feasibility, optimization, and control strategy through computational fluid dynamics simulations, theoretical calculations, and experiments. An appropriate flow regime for efficient removal of pollutant and granulation of sludge was attained at a superficial gas velocity of 1.3 cm/s. Moreover, optimizing the aeration column diameter to half of the reaction column and increasing the height/diameter ratio to 20 dramatically boosted the nitrogen removal capacity over 1.6 kg N/m3/d. Utilizing a smaller circulation pipe diameter ensured granulation under a consistent flow regime. By judiciously regulating, multiple CSTRs and PFRs seamlessly integrated within the Zier reactor across a broad spectrum of particle sludge. The validity of these findings was further substantiated through experimental and theoretical validations. Drawing from these findings, a multi-scenario control strategy was proposed as Zier's map. With all the superiorities shown by the Zier reactor, this study could offer new insights into an efficient continuous AGS process.

Treatment of low-C/N nitrate wastewater using a partial denitrification-anammox granule system: Granule reconstruction, stability, and microbial structure analyses.

Industrial wastewater discharged into sewer systems is often characterized by high nitrate contents and low C/N ratios, resulting in high treatment costs when using conventional activated sludge methods. This study introduces a partial denitrification-anammox (PD/A) granular process to address this challenge. The PD/A granular process achieved an effluent TN level of 3.7 mg/L at a low C/N ratio of 2.3. Analysis of a typical cycle showed that the partial denitrification peaked within 15 min and achieved a nitrate-to-nitrite transformation ratio of 86.9%. Anammox, which was activated from 15 to 120 min, contributed 86.2% of the TN removal. The system exhibited rapid recovery from post-organic shock, which was attributed to significant increases in protein content within TB-EPS. Microbial dispersion and reassembly were observed after coexistence of the granules, with Thauera (39.12%) and Candidatus Brocadia (1.25%) identified as key functional microorganisms. This study underscores the efficacy of PD/A granular sludge technology for treating low-C/N nitrate wastewater.

Unilateral biportal endoscopic decompression versus anterior cervical decompression and fusion for unilateral cervical radiculopathy or coexisting cervical myelopathy: a prospective, randomized, controlled, noninferiority trial.

BACKGROUND: Cervical spondylosis (CS), including myelopathy and radiculopathy, is the most common degenerative cervical spine disease. This study aims to evaluate the clinical outcomes of unilateral biportal endoscopy (UBE) compared to those of conventional anterior cervical decompression and fusion (ACDF) for treating unilateral cervical radiculopathy or coexisting cervical myelopathy induced by unilateral cervical herniated discs. METHODS: A prospective, randomized, controlled, noninferiority trial was conducted. The sample consisted of 131 patients who underwent UBE or ACDF was conducted between September 2021 and September 2022. Patients with cervical nerve roots or coexisting spinal cord compression symptoms and imaging-defined unilateral cervical radiculopathy or coexisting cervical myelopathy induced by unilateral cervical herniated discs were randomized into two groups: a UBE group (n = 63) and an ACDF group (n = 68). The operative time, blood loss, length of hospital stay after surgery, and perioperative complications were recorded. Preoperative and postoperative modified Japanese Orthopaedic Association (mJOA) scale scores, visual analog scale (VAS) scores, neck disability index (NDI) scores, and recovery rate (RR) of the mJOA were utilized to evaluate clinical outcomes. RESULTS: The hospital stay after surgery was significantly shorter in patients treated with UBE than in those treated with ACDF (p < 0.05). There were no significant differences in the neck or arm VAS score, NDI score, mJOA score, or mean RR of the mJOA between the two groups (p < 0.05). Only mild complications were observed in both groups, with no significant difference (p = 0.30). CONCLUSION: UBE can significantly relieve pain and disability without severe complications, and most patients are satisfied with this technique. Consequently, this procedure can be used safely and effectively as an alternative to ACDF for treating unilateral cervical radiculopathy or coexisting cervical myelopathy induced by unilateral cervical herniated discs. TRIAL REGISTRATION: This study was registered in the Chinese Clinical Trial Registry on 02/08/2023 ( http://www.chictr.org.cn , #ChiCTR2300074273).

Generation of a novel attenuated IBDV vaccine strain by mutation of critical amino acids in IBDV VP5.

Infectious bursal disease virus (IBDV) is an acute and highly infectious RNA virus known for its immunosuppressive capabilities, chiefly inflicting rapid damage to the bursa of Fabricius (BF) of chickens. Current clinical control of IBDV infection relies on vaccination. However, the emergence of novel variant IBDV (nVarIBDV) has posed a threat to the poultry industry across the globe, underscoring the great demand for innovative and effective vaccines. Our previous studies have highlighted the critical role of IBDV VP5 as an apoptosis-inducer in host cells. In this study, we engineered IBDV mutants via a reverse genetic system to introduce amino acid mutations in VP5. We found that the mutant IBDV-VP5/3m strain caused reduced host cell mortality, and that strategic mutations in VP5 reduced IBDV replication early after infection, thereby delaying cell death. Furthermore, inoculation of chickens with IBDV-VP5/3m effectively reduced damage to BF and induced neutralizing antibody production comparable to that of parental IBDV WT strain. Importantly, vaccination with IBDV-VP5/3m protected chickens against challenges with nVarIBDV, an emerging IBDV variant strain in China, reducing nVarIBDV loads in BF while alleviating bursal atrophy and splenomegaly, suggesting that IBDV-VP5/3m might serve as a novel vaccine candidate that could be further developed as an effective vaccine for clinical control of IBD. This study provides a new clue to the development of novel and effective vaccines.

A Review of N-(1,3-Dimethylbutyl)-N'-phenyl-p-Phenylenediamine (6PPD) and Its Derivative 6PPD-Quinone in the Environment.

As an antioxidant and antiozonant, N-(1,3-Dimethylbutyl)-N'-phenyl-p-phenylenediamine (6PPD) is predominantly used in the rubber industry to prevent degradation. However, 6PPD can be ozonated to generate a highly toxic transformation product called N-(1,3-Dimethylbutyl)-N'-phenyl-p-phenylenediamine quinone (6PPD-quinone), which is toxic to aquatic and terrestrial organisms. Thus, 6PPD and 6PPD-quinone, two emerging contaminants, have attracted extensive attention recently. This review discussed the levels and distribution of 6PPD and 6PPD-quinone in the environment and investigated their toxic effects on a series of organisms. 6PPD and 6PPD-quinone have been widely found in air, water, and dust, while data on soil, sediment, and biota are scarce. 6PPD-quinone can cause teratogenic, developmental, reproductive, neuronal, and genetic toxicity for organisms, at environmentally relevant concentrations. Future research should pay more attention to the bioaccumulation, biomagnification, transformation, and toxic mechanisms of 6PPD and 6PPD-quinone.

Development of novel bisphenol derivatives with a membrane-targeting mechanism as potent gram-positive antibacterial agents.

Antibiotic resistance is becoming increasingly severe. The development of small molecular antimicrobial peptides is regarded as a promising design strategy for antibiotics. Here, a series of bisphenol derivatives with amphiphilic structures were designed and synthesized as antibacterial agents by imitating the design strategy of antimicrobial peptides. After a series of structural optimizations, lead compound 43 was identified, which exhibited excellent antibacterial activity against Gram-positive bacterial strains (MICs = 0.78-1.56 µg/mL), poor hemolytic activity (HC50 > 200 µg/mL), and low cytotoxicity (CC50 > 100 µg/mL). Further biological evaluation results indicated that 43 exerted antibacterial effects by directly destroying bacterial cell membranes and displayed rapid bactericidal properties (within 0.5-1 h), leading to a very low probability of drug resistance. Moreover, in a murine model of corneal infection, 43 exhibited a strong in vivo antibacterial efficacy. These findings indicate that 43 is a promising candidate compound for the treatment of bacterial infections.

Ultrahigh Electrobending Deformation in Lead-Free Piezoelectric Ceramics via Defect Concentration Gradient Design.

Recent breakthroughs in defect-engineered lead-free piezoelectric ceramics have reported remarkable electrostrain values, surpassing the limit of lattice distortion. This has aroused wide concern on bending deformation and the associated underlying mechanism. Herein, via designing lead-free piezoelectric ceramics with varying volatilization characteristics, it is uncovered that the ultrahigh electrobending deformation is primarily attributed to a large strain gradient induced by unevenly distributed defect dipoles. In 0.5 mm thick Sr/Sn co-doped potassium sodium niobate ceramics featuring volatile K/Na elements, the inherent bipolar electrostrain value can reach 0.3% at 20 kV cm-1 due to the existence of defect dipoles, while the gradient distribution of defect dipole generates significant bending displacement, amplifying apparent electrostrain value to 1.1%. Notably, nonvolatile Ba0.99TiO2.99 ceramic with homogeneous defect dipole distribution does not present electrobending. Of particular interest is that the electrobending phenomenon can be observed through introducing a defect dipole gradient into barium titanate ceramic. A monolayer ceramic with defect dipole gradient can generate large tip displacement (±1.5 mm) in cantilever structure, demonstrating its promising potential in precise positioning. This study delves into the underlying mechanism driving electrobending deformation and its impact on the apparent electrostrain measurement in defect-engineered piezoelectric ceramics, providing fresh perspectives for the development of piezoelectric bending actuators.

Silk fibroin microspheres loaded Rehmannia Liuwei extract for the protection of endothelial cells from the inhibitory effects.

Liuwei Dihuang (LWDH) is a multi-component and multi-target Chinese herbal compound widely used for treating chronic conditions such as diabetes, diabetic nephropathy, hypertension, osteoporosis, and chronic kidney disease. However, traditional Chinese medicine (TCM) preparations like decoction and pill face limitations, including low active component concentration, limited bioavailability, short half-life, and the need for high dosage, which may increase the burden on liver and kidney functions and reduce clinical efficacy. In this study, LWDH was further purified using D101 macroporous adsorption resin, resulting in a soluble extract with an active component content 53.6 times higher than that of LWDH itself. The freeze-dried LWDH extract was then encapsulated within silk fibroin (SF) microspheres to significantly enhance the sustained release performance of the drug. In a human umbilical vein endothelial cell (HUVEC) model cultured under high glucose conditions, methanol vapor-treated SF/LWDH microspheres demonstrated a decrease in the 24-hour drug release rate from 61.88 % to 34.81 %, augmenting their protective effect on endothelial cells.

Innovation for continuous aerobic granular sludge process in actual municipal sewage treatment: Self-circulating up-flow fluidized bed process.

Aerobic granular sludge (AGS) capable of nitrogen and phosphorus removal is mainly limited to the applications in sequencing batch reactors. This study introduced an innovative continuous self-circulating up-flow fluidized bed process (Zier process) using separate aeration. The process was composed of an anoxic column (Zier-A), aeration column (Zier-OO) and aerobic column (Zier-O), and was used to treat actual municipal sewage continuously for 170 days. The process achieved self-circulation of 20-32 times and an up-flow velocity within the reactor of 7-16 m/h which were accurately controlled with only separate aeration. The larger proportion of self-circulating multiple times contributed to particle formation and stability, providing hydraulic shear conditions, and screened the precipitation performance of the granular sludge (GS). Meanwhile, the dissolved oxygen (DO) of Zier-O was controlled at 0.1-0.3 mg/L, and the DO of Zier-A input water was zero. The accurate oxygen supply enhanced simultaneous nitrification and denitrification (SND) as well as short-cut nitrification and denitrification in Zier-O and improved the COD utilization rate and the nitrogen removal rate in Zier-A. The COD treatment capacity reached 2.46 kg-COD/(m³·d). With a hydraulic retention time of 10 h, the process consistently ensured that the average concentrations of ammonia nitrogen and total nitrogen in the effluent were maintained below 5 and 15 mg/L, respectively. Moreover, the process maintained the shape and stability of GS, the median diameter of GS ranged between 300-1210 µm, the percentage of mass with particle size distribution < 200 µm at a height of 150 cm within Zier-A and Zier-O accounted for as low as 0.04%-0.05%, and showed good settling performance. The suspended solids in effluent can be maintained at 50-80 mg/L. Overall, the unique structural setting and control method of the Zier process provide another approach for the application of continuous AGS treatment for municipal sewage.