Nanosuspension-Loaded Dissolving Microneedle Patches for Enhanced Transdermal Delivery of a Highly Lipophilic Cannabidiol.

Purpose: Transdermal Drug Delivery System (TDDS) offers a promising alternative for delivering poorly soluble drugs, challenged by the stratum corneum's barrier effect, which restricts the pool of drug candidates suitable for TDDS. This study aims to establish a delivery platform specifically for highly lipophilic drugs requiring high doses (log P > 5, dose > 10 mg/kg/d), to improve their intradermal delivery and enhance solubility. Methods: Cannabidiol (CBD, log P = 5.91) served as the model drug. A CBD nanosuspension (CBD-NS) was prepared using a bottom-up method. The particle size, polydispersity index (PDI), zeta potential, and concentration of the CBD-NS were characterized. Subsequently, CBD-NS was incorporated into dissolving microneedles (DMNs) through a one-step manufacturing process. The intradermal dissolution abilities, physicochemical properties, mechanical strength, insertion depth, and release behavior of the DMNs were evaluated. Sprague-Dawley (SD) rats were utilized to assess the efficacy of the DMN patch in treating knee synovitis and to analyze its skin permeation kinetics and pharmacokinetic performance. Results: The CBD-NS, stabilized with Tween 80, exhibited a particle size of 166.83 ± 3.33 nm, a PDI of 0.21 ± 0.07, and a concentration of 46.11 ± 0.52 mg/mL. The DMN loaded with CBD-NS demonstrated favorable intradermal dissolution and mechanical properties. It effectively increased the delivery of CBD into the skin, extended the action's duration in vivo, and enhanced bioavailability. CBD-NS DMN exhibited superior therapeutic efficacy and safety in a rat model of knee synovitis, significantly inhibiting TNF-α and IL-1ß compared with the methotrexate subcutaneous injection method. Conclusion: NS technology effectively enhances the solubility of the poorly soluble drug CBD, while DMN facilitates penetration, extends the duration of action in vivo, and improves bioavailability. Furthermore, CBD has shown promising therapeutic outcomes in treating knee synovitis. This innovative drug delivery system is expected to offer a more efficient solution for the administration of highly lipophilic drugs akin to CBD, thereby facilitating high-dose administration.

Industrializable approach for preparing hydrogel microneedles and their application in melanoma treatment.

Microneedles (MNs) technology has been studied in transdermal drug delivery for more than 20 years with hundreds of clinical trials conducted. However, there are currently no commercially available MNs in medicine due to challenges in materials safety, cost-effective fabrication, and large-scale manufacturing. Herein, an approach for rapid and green fabrication of hydrogel microneedles (HMNs) based on infrared irradiation process was proposed for the first time. The optimized formulation consisted of polyvinyl alcohol (PVA) and polyvinyl pyrrolidone (PVP), which acted as cross-linked materials and pore-forming agents, respectively. The manufacturing method involved placing MNs patches under infrared irradiation at 70 °C for 2 min and annealing to obtain HMNs with excellent swelling behavior, mechanical strength, and biocompatibility. When model drugs azelaic acid (AZA) and matrine (MAT) were loaded into HMNs systems, the chemical stability of MAT was significantly improved. Ex vivo transdermal delivery experiments indicated that HMNs could achieve synchronous release of AZA and MAT, and the 24-hour percutaneous permeability rates of both drugs were 73.09 ± 0.48 % and 71.56 ± 1.23 %, respectively. In-vivo pharmacokinetic studies, HMNs administration presented dose-dependent stable blood drug concentrations for both drugs. Additionally, prominent anti-tumor efficacy and biosecurity were observed in the drug-loaded HMNs group in the pharmacodynamic evaluation. In summary, the efficient, convenient, and low-cost fabrication method based on infrared irradiation offers the possibility of mass production of drug-loaded HMNs, showing potential for industrial manufacturing development.

Clinical Development and Evaluation of a Multi-Component Dissolving Microneedle Patch for Skin Pigmentation Disorders.

Excessive melanin deposition in the skin leads to various skin pigmentation diseases, such as chloasma and age spots. The deposition is induced by several factors, including tyrosinase activities and ultraviolet-induced oxidative stress. Herein, we propose a multi-component, multi-pathway drug combination, with glabridin, 3-O-ethyl-L-ascorbic acid, and tranexamic acid employed as, respectively, a tyrosinase inhibitor, an antioxidant, and a melanin transmission inhibitor. Considering the poor skin permeability associated with topical application, dissolving microneedles (MNs) prepared with hyaluronic acid/poly(vinyl alcohol)/poly(vinylpyrrolidone) were developed to load the drug combination. The drug-loaded microneedles (DMNs) presented outstanding skin insertion, dissolution, and drug delivery properties. In vitro experiments confirmed that DMNs loaded with active ingredients had significant antioxidant and inhibitory effects on tyrosinase activity. Furthermore, the production of melanin both in melanoma cells (B16-F10) and in zebrafish was directly reduced after using DMNs. Clinical studies demonstrated the DMNs' safety and showed that they have the ability to effectively reduce chloasma and age spots. This study indicated that a complex DMN based on a multifunctional combination is a valuable depigmentation product worthy of clinical application.

Soluble Polymer Microneedles Loaded with Interferon Alpha 1b for Treatment of Hyperplastic Scar.

To achieve the painless administration of interferon alpha 1b (rhIFNα-1b), a double-layered soluble polymer microneedle (MN) patch loaded with rhIFNα-1b was used to deliver rhIFNα-1b transdermally. The solution containing rhIFNα-1b was concentrated in the MN tips under negative pressure. The MNs punctured the skin and delivered rhIFNα-1b to the epidermis and dermis. The MN tips implanted in the skin dissolved within 30 min and gradually released rhIFNα-1b. The rhIFNα-1b had a significant inhibitory effect on the abnormal proliferation of fibroblasts and excessive deposition of collagen fibers in the scar tissue. The color and thickness of the scar tissue treated using the MN patches loaded with rhIFNα-1b were effectively reduced. The relative expressions of type I collagen (Collagen I), type III collagen (Collagen III), transforming growth factor beta 1 (TGF-ß1), and α-smooth muscle actin (α-SMA) were significantly downregulated in scar tissues. In summary, the MN patch loaded with rhIFNα-1b provided an effective method for the transdermal delivery of rhIFNα-1b.

Aspirin microcrystals deposited on high-density microneedle tips for the preparation of soluble polymer microneedles.

To reduce mucosal damage in the gastrointestinal tract caused by aspirin, aspirin microcrystals were loaded in soluble polymeric microneedle (MN) tips. Aspirin was prepared into aspirin microcrystals by jet milling. Aspirin microcrystals with particle sizes of 0.5-5 µm were loaded on MN tips with a height of 250 µm or 300 µm. The aspirin microcrystals suspended in a polymer solution were concentrated in the MN tips under negative pressure. The aspirin microcrystals had high stability in the MNs since they were not dissolved in solution during the fabrication process. The MN patch packaged in an aluminum-plastic bag containing silica gel desiccant can be stored at 4 °C. The MN tips implanted in the skin of Institute of Cancer Research (ICR) mice dissolved within 30 min. Isolated porcine ear skin was punctured by MNs with heights of 300 µm and 250 µm to depths of 130 µm and 90 µm, respectively. The fluorescent red (FR) release from MNs reached 98.59% within 24 h. The MNs delivered aspirin microcrystals to the epidermis and dermis, providing a smooth plasma concentration in rats. The MNs loaded with aspirin microcrystals did not evoke primary irritation on the dorsal skin of Japanese white rabbits. In summary, MNs loaded with aspirin microcrystals provide a new approach to improve the stability of aspirin in MN patches.

Thermal stability of exenatide encapsulated in stratified dissolving microneedles during storage.

As low-temperature storage and transportation of peptides require high costs, improving the dosage form of peptides can reduce costs. We developed a thermostable and fast-releasing stratified dissolving microneedle (SDMN) system for delivering exenatide (EXT) to patients with type 2 diabetes. Among the tested polymers, dextran and polyvinyl alcohol (PVA) were the best at stabilizing EXT under high-temperature storage for 9 weeks. The two polymers possess a relatively high glass transition temperature (Tg) and weak hydrogen bonding between PVA and EXT. Additionally, zinc sulfate (ZnSO4) had a stabilizing effect on EXT among the selected stabilizers, suggesting that EXT formed a dimer after coordination with zinc ions (Zn2+). In addition, the denaturation temperature (Tm) of EXT was increased by adding ZnSO4, thus stabilizing EXT. Accordingly, SDMNs consisting of a tip layer (dextran encapsulating the Zn2+-EXT complex) and a base layer (PVA) were fabricated. Within 2 min of implantation, the EXT loaded on the patch was quickly released into the skin. Transdermal pharmacokinetics studies showed that manufactured SDMNs generated comparable efficacy to subcutaneous injection. Significantly, the remaining EXT amount was not significantly different under storage at 40 °C and -20 °C for 3 months, supporting that the SDMN system had excellent delivery efficiency and stability, thus reducing the dependence on the cold chain.

Dissolvable polymeric microneedles loaded with aspirin for antiplatelet aggregation.

To reduce mucosal damage in the gastrointestinal tract caused by aspirin, we developed a dissolvable polymeric microneedle (MN) patch loaded with aspirin. Biodegradable polymers provide mechanical strength to the MNs. The MN tips punctured the cuticle of the skin and dissolved when in contact with the subcutaneous tissue. The aspirin in the MN patch is delivered continuously through an array of micropores created by the punctures, providing a stable plasma concentration of aspirin. The factors affecting the stability of aspirin during MNs fabrication were comprehensively analyzed, and the hydrolysis rate of aspirin in the MNs was less than 2%. Compared to oral administration, MN administration not only had a smoother plasma concentration curve but also resulted in a lower effective dose of antiplatelet aggregation. Aspirin-loaded MNs were mildly irritating to the skin, causing only slight erythema on the skin and recovery within 24 h. In summary, aspirin-loaded MNs provide a new method to reduce gastrointestinal adverse effects in patients requiring aspirin regularly.

Design and Evaluation of Complex Polypeptide-Loaded Dissolving Microneedles for Improving Facial Wrinkles in Different Areas.

Wrinkles are one of the most intuitive manifestations of skin aging. Complex polypeptide-loaded dissolving microneedles (CP-DMNs) for facial wrinkles in different areas have been developed and evaluated for the first time. In optimizing formulations, we compared the differences in CP-DMNs heights on skin insertion depth and skin repair and healing. Furthermore, systemic safety experiments were carried out to provide a reference for clinical application. On this basis, an 84-day efficacy assessment based on the improvement of facial wrinkles in different areas and a comparison between CP-DMNs vs. placebo was performed on 30 healthy subjects. As a result, DMNs with a height of 300 µm presented sufficient strength to pierce the stratum corneum with minimized skin damage. In addition, CP-DMNs possessed excellent biological safety and skin compatibility for clinical application. Compared with placebo, CP-DMNs exhibited obvious improvements in wrinkles distributed in the corners of eyes, under-eyes, and nasolabial folds. Furthermore, after using CP-DMNs for 84 days, facial wrinkles in five different areas were smoothed. In short, the complex polypeptides showed apparent anti-wrinkle efficacy with the aid of DMNs technology, and CP-DMNs seemed to work better on deeper wrinkles, such as frown lines and nasolabial folds.

Two-Layer Sustained-Release Microneedles Encapsulating Exenatide for Type 2 Diabetes Treatment.

Daily administration of multiple injections can cause inconvenience and reduce compliance in diabetic patients; thus, microneedle (MN) administration is favored due to its various advantages. Accordingly, the two-layer sustained-release MNs (TS-MNs) were fabricated by encapsulating exenatide (EXT) in calcium alginate (CA) gel in this work. The TS-MNs were composed of a sodium alginate (SA) tip and a water-soluble matrix-containing calcium chloride (CaCl2). Subsequently, the calcium ion (Ca2+) contained in the matrix layer penetrated the tip layer for cross-linking, leaving the drug in the cross-linked network. The patches have adequate mechanical strength to pierce the skin; then, the matrix layer is dissolved, leaving the tip layer to achieve sustained release. Additionally, the TS-MNs encapsulating EXT retained high activity during long-term storage at room temperature. The pharmacokinetic results indicated that the plasma concentrations of EXT were sustained for 48 h in the EXT MN group, which agreed with the in vitro release test. Furthermore, they had high relative bioavailability (83.04%). Moreover, the hypoglycemic effect was observed to last for approximately 24 h after a single administration and remained effective after multiple administrations without drug resistance. These results suggest that the TS-MNs are a promising depot for the sustained delivery of encapsulated EXT.

Process optimization of Ca2+ cross-linked alginate-based swellable microneedles for enhanced transdermal permeability: More applicable to acidic drugs.

We describe a swellable microneedle (SMN) consisting of Ca2+ cross-linked alginate, which expands the types of natural polymers available for SMN fabrication. After investigation of different fabrication methods, the alginate in situ hydrogel-based SMN with a flat substrate was successfully constructed, whose gelation was triggered by ethylenediaminetetraacetic acid calcium disodium salt and D-(+)-glucono-1,5-lactone. With the addition of polyvinyl alcohol and trehalose, SMN possessed good mechanical properties. The biocompatibility of SMN was demonstrated through the tests of in vitro cytotoxicity and in vivo skin irritation. With the assistance of SMN, the in vitro transdermal delivery efficiencies of drugs were significantly improved throughout 16 h. 3-O-ethyl ascorbic acid (EAA, pH = 4.81) exhibited a cumulative release of up to 83.83 ± 6.30%, which was consistent with zero-order kinetics, while tranexamic acid (TA, pH = 6.90) showed the most significant increase in delivery efficiency, which was consistent with the Higuchi model and Ritger-Peppas model. The SMN remained intact after the 16 h of EAA transdermal delivery, indicating its better suitability for acidic drugs. We believe that this technology has the potential to expand the range of drugs available for transdermal administration as well as the breadth of patient care applications.

Preparation, characterization, and in vivo evaluation of levonorgestrel-loaded thermostable microneedles.

To facilitate the storage and use of poly (lactic-co-glycolic acid) (PLGA)-based microneedles (MNs) in hot seasons and regions, thermally stable MNs loaded with levonorgestrel (LNG) were developed. Due to its good biocompatibility and high glass transition temperature (Tg), Hydroxypropyl methylcellulose (HPMC) was added to the PLGA-based MNs to increase thermal stability. MNs with HPMC exhibited excellent thermal stability at high temperatures. After the MNs has been applied to the skin for 10 min, the backing layer of the MNs was dissolved by contact with the interstitial fluid of skin, which resulted in the separation of the MN tips from the backing layer. The MN tips were implanted intradermally and sustained-release LNG. Biodegradable polymers were used to encapsulate the LNG, providing long-acting contraception. The in vitro release rate of LNG from the MNs reached 72.78%-83.76% within 21 days. In rats, the MNs maintained plasma concentrations of LNG above the human contraceptive level for 8-12 days. In mice, the time required for complete degradation of the MN tips was 12-16 days. MNs have excellent medication adherence due to the advantages of painlessness, minimally invasive, and self-administered. MNs can make long-acting contraceptives more readily available to humans.

Enhanced delivery efficiency and sustained release of biopharmaceuticals by complexation-based gel encapsulated coated microneedles: rhIFNα-1b example.

Coated microneedles (MNs) are widely used for delivering biopharmaceuticals. In this study, a novel gel encapsulated coated MNs (GEC-MNs) was developed. The water-soluble drug coating was encapsulated with sodium alginate (SA) in situ complexation gel. The manufacturing process of GEC-MNs was optimized for mass production. Compared to the water-soluble coated MNs (72.02% ± 11.49%), the drug delivery efficiency of the optimized GEC-MNs (88.42% ± 6.72%) was steadily increased, and this improvement was investigated through in vitro drug release. The sustained-release of BSA was observed in vitro permeation through the skin. The rhIFNα-1b GEC-MNs was confirmed to achieve biosafety and 6-month storage stability. Pharmacokinetics of rhIFNα-1b in GEC-MNs showed a linearly dose-dependent relationship. The AUC of rhIFNα-1b in GEC-MNs (4.51 ng/ml·h) was bioequivalent to the intradermal (ID) injection (5.36 ng/ml·h) and significantly higher than water-soluble coated MNs (3.12 ng/ml·h). The rhIFNα-1b elimination half-life of GEC-MNs, soluble coated MNs, and ID injection was 18.16, 1.44, and 2.53 h, respectively. The complexation-based GEC-MNs have proved to be more efficient, stable, and achieve the sustained-release of water-soluble drug in coating MNs, constituting a high value to biopharmaceutical.

Acid-base combination principles for preparation of anti-acne dissolving microneedles loaded with azelaic acid and matrine.

To overcome the poor solubility, skin irritation, and low permeability of azelaic acid (AZA) existed on the marketed formulations, a co-drug principle via matrine (MAT) was adopted to prepare anti-acne dissolving microneedles (DMNs). The formula was optimized according to the solubility and antibacterial activity of novel ionic salt. The results indicated solubilization of AZA could be achieved at a molar ratio between AZA and MAT was 1:1. Meanwhile, synergistic antibacterial and anti-irritative properties were acquired. The matrix materials were composed of sodium carboxymethyl cellulose (CMC), polyvinylpyrrolidone (PVP), and trehalose. And drug loadings of AZA and MAT in DMNs were 201.88 ± 4.81 µg and 259.71 ± 1.72 µg, respectively. After insertion into porcine skin for 10 h, the cumulative permeability of AZA and MAT were 68.16% ± 3.79% and 57.37 ± 5.17%, respectively, while just 4.13 ± 0.39% (p < 0.01) was detected for commercially available AZA gel. In vitro antibacterial experiment, bacteriostatic rates of DMNs were all above 95% for Staphylococcus aureus, Staphylococcus epidermidis, and Propionibacterium acnes. Besides, DMNs exhibited no cytotoxicity and skin irritation. In conclusion, combination between AZA and MAT addressed shortcomings of AZA, and made it easier, safer, and more effective in acne treatment.

Novel dissolving microneedles preparation for synergistic melasma therapy: Combined effects of tranexamic acid and licorice extract.

The aim of this study was to prepare dissolving microneedles (DMNs) patches containing tranexamic acid (TA) for the treatment of melasma. Polyvinyl alcohol (PVA) and polyvinylpyrrolidone (PVP) were preferred as matrix materials through the compatibility experiment. In the in vitro permeation study, the transdermal amount of TA was significantly promoted through dissolving microneedles with the cumulative release was 44.43 ± 6.55%. By comparison, the release of TA solution assisted with solid microneedles (SMNs) was merely 11.31 ± 2.30% (p < 0.05). Pharmacokinetics study indicated the bioavailability of dissolving microneedles was more than 1.3 times compared with oral administration. In pharmacodynamics investigation, TA dissolving microneedles obviously reduced melanin deposition in the skin of melasma guinea pigs after 8 consecutive administrations. In particular, the combination of tranexamic acid and licorice extract (LIC) dissolving microneedles worked better than tranexamic acid alone. Accelerated stress conditions including high temperature, high humidity, as well as photostability were designed to prove that TA microneedles maintained good pharmaceutical stability. In conclusion, tranexamic acid dissolving microneedles showed reliable quality and remarkable effect. Moreover, the combination of tranexamic acid and licorice extract had a synergistic therapy in melasma.

Association of Epigenetic Age and p16INK4a With Markers of T-Cell Composition in a Healthy Cohort.

How the measurement of aging biomarkers in peripheral blood T-lymphocytes (PBTLs) is influenced by cell composition is unclear. Here, we collected peripheral blood and isolated CD3+ PBTLs from 117 healthy couples between the ages of 21 and 72. Each sample was profiled for Horvath epigenetic clock (DNAm), p16INK4a expression, cytomegalovirus (CMV) seropositivity and 74 mRNA markers of PBTL subtype, differentiation, immune checkpoints, and cytokine production. Correlations between individual aging biomarkers (DNAm or p16INK4a) and PBTL mRNAs were corrected for chronological age, sex, and couple. DNAm measurements correlated with CMV seropositivity as well as PBTL mRNAs indicative of effector function (CD8A, EOMES, TBX21, GZMB), poor proliferative capacity (KLRG1, CD57), differentiation (CD45RO, CD45RA), and immune checkpoints (PDCD1, TIGIT, LAG3, CD160, CD244). In contrast, only three PBTL mRNAs, CD28, CD244, and p14ARF, showed a significant association with p16INK4a. p16INK4a expression also showed a weaker association with immunosenescent PBTL subsets than DNAm in flow cytometry analyses. These data suggest that PBTL composition has a greater influence on DNAm than p16INK4a and link accelerated epigenetic aging to immunosenescent phenotypes.

Intradermal Implantable PLGA Microneedles for Etonogestrel Sustained Release.

This study reported novel long-acting microneedles (MNs) that can be implanted into the skin in situ quickly. It was prepared to entrap a model drug in the biodegradable poly(lactide-co-glycolide) (PLGA) needle tips by a controllable casting-mold technique, avoiding the effect of high temperature melting the drug stability. The third-generation progesterone etonogestrel (ENG) was selected as the model drug. A new preparing method of MNs was proposed by using N-methyl pyrrolidinone as a solvent for needle tip matrix with good biocompatibility and safety. After solidified at 70°C for 4 h, the needle tips were strong enough to puncture the skin. ENG could crystallize uniformly in needle tips, observed by a polarizing microscope. The intradermal implantation ratio of the MNs was affected by the parameters of needle shape and needle spacing. With optimization of MN formulations, the drug loading capacity was 153.0 ± 13.5 µg, and the drug utilization rate was up to 92.6 ± 8.1%. In rats, the pharmacokinetic study of the implantable MNs showed that the plasma ENG level could be detectable until 336 h and the AUC0→48h only accounted for 37.8% of AUC0→∞. Therefore, this developed intradermal implantable MNs could provide a minimally invasive sustained-release system suitable for self-administration.

Exploring Trehalose on the Release of Levonorgestrel from Implantable PLGA Microneedles.

Hydrophobic drugs wrapped in poly (lactic-co-glycolic acid) (PLGA)-based microneedles (MNs) require a long time to release completely. To obtain the desired duration, it is still necessary to modulate the release of hydrophobic drugs from MNs, while the PLGA composition is unchangeable. In this work, implantable PLGA microneedles (IPMNs) composed of PLGA arrowheads encapsulating levonorgestrel (LNG) and a water-soluble supporting array were designed. We explored trehalose used as a porogen on the release of hydrophobic LNG from PLGA-based MNs. Varying the trehalose content in PLGA arrowheads could induce different rates of drug release. The highest cumulative release of LNG was 76.2 ± 3.9% for IPMNs with 33.3% trehalose during 21 days in vitro, while the cumulative release of LNG was 60.4 ± 3.5% for IPMNs without trehalose. Pharmacokinetic results in rats showed that plasma levels of LNG were sustained for 13 days for IPMNs with 33.3% trehalose and 16 days for IPMNs without trehalose. Furthermore, the PLGA arrowheads with trehalose degraded more rapidly than those without trehalose over 21 days in rats. Consequently, using trehalose as a porogen was a feasible approach to modulate the release of a hydrophobic drug from PLGA-based MNs.

Impact of age-related T cell dynamics on the identification of biomarkers predictive of immunotherapy discontinuation: a prospective cohort study.

BACKGROUND: The impact of biologic aging on immune checkpoint inhibitor (ICI) toxicity and efficacy is underexplored in metastatic melanoma (MM). In peripheral blood T-lymphocytes (PBTLs), biologic aging is characterized by changes in T-cell composition and cellular senescence. Whether indicators of PBTL biologic aging vary in MM patients or can be used to predict premature ICI discontinuation (pID) is unknown. METHODS: We prospectively collected PBTLs from 117 cancer-free controls and 46 MM patients scheduled to begin pembrolizumab or nivolumab monotherapy. 74 mRNAs indicative of T-cell subsets, activation, co-stimuation/inhibition and cellular senescence were measured by Nanostring. Relationships between each mRNA and chronologic age were assessed in patients and controls. Candidate biomarkers were identified by calculating the hazard ratio (HR) for pID in patients divided into low and high groups based on log-transformed mRNA levels or the magnitude by which each mRNA measurement deviated from the control trend (Δage). Area under the curve (AUC) analyses explored the ability of each biomarker to discriminate between patients with and without pID at 6 months and 1 year. RESULTS: Fifteen mRNAs correlated with chronologic age in controls, including markers of T-cell subsets, differentiation, cytokine production and co-stimulation/inhibition. None of these mRNAs remained correlated with age in patients. Median follow-up was 94.8 (1.6-195.7) weeks and 35 of 46 patients discontinued therapy (23 progression, 7 toxicity, 5 comorbidity/patient preference). Elevated pre-therapy CD8A (HR 2.2[1.1-4.9]), CD45RB (HR 2.9[1.4-5.8]) and TNFRSF14 (HR 2.2[1.1-4.5]) levels predicted pID independent of Δage-correction. CD3ε, CD27 and FOXO1 predicted pID only after Δage-correction (HR 2.5[1.3-5.1]; 3.7[1.8-7.8]; 2.1[1.1-4.3]). AUC analysis identified Δage-CD3ε and -CD27 as candidate predictors of pID (AUC=0.73; 0.75). CONCLUSIONS: Correlations between transcriptional markers of PBTL composition and chronologic age are disrupted in MM. Correcting for normal, age-related trends in biomarker expression unveils new biomarker candidates predictive of ICI outcomes.

T Cell Transcriptional Profiling and Immunophenotyping Uncover LAG3 as a Potential Significant Target of Immune Modulation in Multiple Myeloma.

Autologous stem cell transplant (ASCT) is the standard of care for patients with multiple myeloma (MM). The clinical significance of peripheral blood T lymphocyte (PBTL) immunologic changes associated with ASCT is poorly understood. Here we evaluated T cell transcriptional messenger RNA profiles and immunophenotypes to correlate immunologic senescence, exhaustion, and anergy with clinical endpoints in a cohort of patients with MM undergoing ASCT. ASCT induced global transcriptional T cell changes and altered molecular levels of markers of T cell subtypes, T cell activation, and exhaustion. These included reduced CD4/CD8 ratio, skewing toward the Th1 subset, reduced expression of costimulatory receptors CD27 and CD28, heightened T cell activation, and increased expression of immune modulatory molecules LAG3 and PD1. Multicolor flow cytometry experiments confirmed altered circulating CD4 and CD8 subsets and skewing toward differentiated effector cells. Moreover, ASCT promoted an exhausted immunophenotype in CD3+CD4+ subsets and a senescent immunophenotype in CD3+CD8+ subsets. Subset-specific altered expression was also seen for surface molecules with immunomodulatory function. ASCT affected soluble levels of molecules with immunomodulatory function by increasing plasma HVEM and TIM3. High molecular LAG3 level was associated with inferior event-free survival post-ASCT (hazard ratio = 5.44; confidence interval, 1.92 to 15.46; P = .001; adjusted P [controlling for false discovery rate] = .038). Using a comprehensive evaluation of PBTLs on a molecular and phenotypic level, we have identified that ASCT induces global T cell alterations with CD4 and CD8 subset-specific changes. Moreover, LAG3 emerged as an early biomarker of adverse events post-ASCT. These findings will support the development of treatment strategies targeting immune defects in MM to augment or restore T cell responses.

Transcutaneous immunization of recombinant Staphylococcal enterotoxin B protein using a dissolving microneedle provides potent protection against lethal enterotoxin challenge.

Staphylococcal enterotoxin B (SEB) produced by the Staphylococcus aureus bacteriumis most commonly associated with food poisoning and is known to also cause toxic shock syndrome. Currently, no approved vaccine or specific drug is available to treat SEB intoxication. In this study, we fabricated dissolving microneedles (MNs) loaded with recombinant SEB (rSEB) protein, and evaluated its characteristics, including dissolution profile, protein particle size, insertion depth, antigen retention time in vivo, and skin irritation. Our results showed that rSEB protein-loaded dissolving MNs made of chondroitin sulfate (2%) and trehalose (0.8%) could easily penetrate into the mouse skin within 5 min. The rSEB particle size was unchanged before and after MN fabrication. The skin penetration depth of the MNs was 260 µm. Moreover, the MNs also significantly extended the antigen retention time in vivo. rSEB protein-loaded dissolving MNs also triggered slight erythema at the beginning of administration, but this erythema disappeared within a few hours. More importantly, we investigated the immunogenicity and protective efficacy of rSEB protein-loaded dissolving MNs. Challenge studies in mice revealed that mice in full-dose MN group had a high level of SEB specific antibody response thatprovided100% protection against a lethal SEB toxin challenge. However, there was only 60% protection observed in mice that were in the half-dose MN (dose sparing) group. We also determined the pathological alterations in the tissues of the immunized mice. Taken together, these dissolving MNs may present a promising transcutaneous immunization strategy for treating SEB intoxication.