Band Engineering of Perovskite Quantum Dot Solids for High-Performance Solar Cells.

CsPbI3 perovskite quantum dot (PQD) shows high potential for next-generation photovoltaics due to their tunable surface chemistry, good solution-processability and unique photophysical properties. However, the remained long-chain ligand attached to the PQD surface significantly impedes the charge carrier transport within the PQD solids, thereby predominantly influencing the charge extraction of PQD solar cells (PQDSCs). Herein, a ligand-induced energy level modulation is reported for band engineering of PQD solids to improve the charge extraction of PQDSCs. Detailed theoretical calculations and systemic experimental studies are performed to comprehensively understand the photophysical properties of the PQD solids dominated by the surface ligands of PQDs. The results reveal that 4-nitrobenzenethiol and 4-methoxybenzenethiol molecules with different dipole moments could firmly anchor to the PQD surface thoroughly the thiol group to modulate the energy levels of PQDs, and a gradient band structure within the PQD solid is subsequently realized. Consequently, the band-engineered PQDSC delivers an efficiency of up to 16.44%, which is one of the highest efficiencies of CsPbI3 PQDSCs. This work provides a feasible avenue for the band engineering of PQD solids by tuning the surface chemistry of PQDs for high-performing solar cells or other optoelectronic devices. This article is protected by copyright. All rights reserved.

Flexible Strain Sensors Based on an Interlayer Synergistic Effect of Nanomaterials for Continuous and Noninvasive Blood Pressure Monitoring.

The continuous, noninvasive monitoring of human blood pressure (BP) through the accurate detection of pulse waves has extremely stringent requirements on the sensitivity and stability of flexible strain sensors. In this study, a new ultrasensitive flexible strain sensor based on the interlayer synergistic effect was fabricated through drop-casting and drying silver nanowires and graphene films on polydimethylsiloxane substrates and was further successfully applied for continuous monitoring of BP. This strain sensor exhibited ultrahigh sensitivity with a maximum gauge factor of 34357.2 (∼700% sensitivity enhancement over other major sensors), satisfactory response time (∼85 ms), wide strange range (12%), and excellent stability. An interlayer fracture mechanism was proposed to elucidate the working principle of the strain sensor. The real-time BP values can be obtained by analyzing the relationship between the BP and the pulse transit time. To verify our strain sensor for real-time BP monitoring, our strain sensor was compared with a conventional electrocardiogram-photoplethysmograph method and a commercial cuff-based device and showed similar measurement results to BP values from both methods, with only minor differences of 0.693, 0.073, and 0.566 mmHg in the systolic BP, diastolic BP, and mean arterial pressure, respectively. Furthermore, the reliability of the strain sensors was validated by testing 20 human subjects for more than 50 min. This ultrasensitive strain sensor provides a new pathway for continuous and noninvasive BP monitoring.

Multimodal surface coils for low field MR imaging.

Low field MRI is safer and more cost effective than the high field MRI. One of the inherent problems of low field MRI is its low signal-to-noise ratio or sensitivity. In this work, we introduce a multimodal surface coil technique for signal excitation and reception to improve the RF magnetic field (B 1 ) efficiency and potentially improve MR sensitivity. The proposed multimodal surface coil consists of multiple identical resonators that are electromagnetically coupled to form a multimodal resonator. The field distribution of its lowest frequency mode is suitable for MR imaging applications. The prototype multimodal surface coils are built, and the performance is investigated and validated through numerical simulation, standard RF measurements and tests, and comparison with the conventional surface coil at low fields. Our results show that the B 1 efficiency of the multimodal surface coil outperforms that of the conventional surface coil which is known to offer the highest B 1 efficiency among all coil categories, i.e., volume coil, half-volume coil and surface coil. In addition, in low-field MRI, the required low-frequency coils often use large value capacitance to achieve the low resonant frequency which makes frequency tuning difficult. The proposed multimodal surface coil can be conveniently tuned to the required low frequency for low-field MRI with significantly reduced capacitance value, demonstrating excellent low-frequency operation capability over the conventional surface coil.

Assessing the quality of experience in wireless networks for multimedia applications: A comprehensive analysis utilizing deep learning-based techniques.

In the context of the burgeoning progression of wireless network technology and the corresponding escalation in the demand for mobile Internet-based multimedia transmission services, the task of preserving and augmenting user satisfaction has emerged as an imperative concern. This necessitates a sophisticated and accurate evaluation of multimedia service quality within the sphere of wireless networks. To systematically address the nuanced issue of user experience quality, the present study introduces a novel method for evaluating multimedia Quality of Experience (QoE) in wireless networks, employing an advanced deep learning model as the underlying analytical framework. Initially, the research undertakes the task of modeling the video session process, giving due consideration to the status of each temporal interval within the session's architecture. Subsequently, the challenge of QoE prediction is dissected and investigated through the lens of recurrent neural networks (RNNs), culminating in the proposition of an all-encompassing QoE prediction model that harmoniously integrates video information, Quality of Service (QoS) data, user behavior analytics, and facial expression analysis. The empirical segment of this research serves to validate the efficacy of the suggested video QoE evaluation method, engaging both quantitative and qualitative comparison metrics with contemporaneous state-of-the-art QoE models, employing the RTVCQoE dataset as the empirical foundation. The experimental findings illuminate that the QoE model elucidated in this study transcends competing models in performance metrics such as PLCC, SRCC, and KRCC. Consequently, this investigation stands as a seminal contribution to academic literature, furnishing an exacting and dependable QoE evaluation methodology. Such a contribution augments the user experience landscape in multimedia services within wireless networks, and instigates further scholarly exploration and technological innovation in the mobile Internet domain.

Meta-analysis of acupuncture treatment for cervicogenic headache.

OBJECTIVE: To analyze and evaluate the clinical effect of acupuncture on cervicogenic headache (CEH), and provide evidence-based basis for clinical selection of acupuncture for cervicogenic headache. METHODS: Databases including China Knowledge Network, Wanfang, VIP Chinese sci-tech journals, Chinese Biomedical, and PubMed were searched to collect clinical randomized controlled trials on the effectiveness of acupuncture in the treatment of CEH until November 2023. Statistical analysis was performed using the RevMan 5.4.1 software, and heterogeneity was assessed using the Q test (P value), allowing for the calculation of the combined effect odds ratio through either the fixed or random-effect model. Sensitivity analysis will be conducted by excluding articles with the highest weight, while the validity of the literature will be evaluated through the creation of a funnel plot to identify any potential biases. RESULTS: A total of 400 articles were retrieved, and eventually, 20 clinical randomized controlled trials were included in the analysis. Comparing with control, acupuncture exhibited a higher total effective rate in treating CEH. The cure rate was also higher in the experimental group, and improvements in short-term and long-term visual analogue scale scores outcomes were significantly greater than those in the control group. The quality-of-life scores were higher in CEH patients treated with acupuncture. Sensitivity analysis confirmed the stability and reliability of the pooled effect size results. The results of the funnel plot indicated the presence of publication bias. CONCLUSION: Acupuncture treatment is effective for cervicogenic headache relief and worthy of clinical application.

Understanding the Transepithelial Transport and Transbilayer Diffusion of the Antihypertensive Peptide Asn-Cys-Trp: Insights from Caco-2 Cell Monolayers and the DPPC Model Membrane.

Understanding the transport mechanism of the peptide Asn-Cys-Trp (NCW) is crucial to improving its intestinal absorption and bioavailability. This study investigated the absorption of NCW through Caco-2 cell monolayers and its interaction with the DPPC bilayers. Results revealed that after a 3 h incubation, the Papp (AP-BL) and Papp (BL-AP) values of NCW at a concentration of 5 mmol/L were (22.24 ± 4.52) × 10-7 and (6.63 ± 2.31) × 10-7 cm/s, respectively, with the transport rates of 1.59 ± 0.32 and 0.62 ± 0.20%, indicating its moderate absorption. NCW was found to be transported via PepT1 and paracellular transport pathways, as evidenced by the significant impact of Gly-Pro and cytochalasin D on the Papp values. Moreover, NCW upregulated ZO-1 mRNA expression. Further investigation of the ZO-1-mediated interaction between NCW and tight junction proteins will contribute to a better understanding of the paracellular transport mechanism of NCW. The interaction between NCW and the DPPC bilayers was predominantly driven by entropy. NCW permeated the bilayers through electrostatic, hydrogen bonding, and hydrophobic interactions, resulting in increased fluidity, flexibility, and disorder as well as phase transition and phase separation of the bilayers.

Renal cell carcinoma in an adult-onset ESRD patient with nephronophthisis harboring NPHP3 deletion: A case report.

Background: Nephronophthisis (NPHP) is a rare autosomal recessive inherited tubulointerstitial nephropathy, the most prevalent genetic cause of end-stage renal disease (ESRD) in children. Convincing evidence indicated that the overall prevalence of NPHP in adult-onset ESRD is very likely to be an underestimation. Therefore, understanding the genetic background and clinicopathologic features of adult-onset NPHP is warranted. Case presentation: we reported one intriguing case with concurrent NPHP3 c.2694-2_2694-1delAG (splicing) variant and c.1082C > G (p.S361C) variant. A 48-year-old male was admitted to our hospital, complained about renal dysfunction for 10 years, and found right renal space-occupying lesion for 1 week. One of the most interesting clinical features is adult-onset ESRD, which differs from previous cases. Another discovery of this study is that the NPHP harboring NPHP3 deletion may be associated with clear cell renal cell carcinoma. Conclusion: In conclusion, we report two mutations in the NPHP3 gene that cause NPHP with adult-onset ESRD and renal clear cell carcinoma in a Chinese family, enriching the clinical features of NPHP.

Simultaneous removal of methylene blue and Cr(VI) in a dual-chamber photocatalytic microbial fuel cell with WO3/MoS2/FTO photocathode.

Carbon felt was used as the anode and WO3/MoS2/FTO (fluorine-doped tin oxide) was used as the photocathode in a photocatalytic microbial fuel cell (PMFC). The photoelectric performance of the WO3/MoS2/FTO photocathode and the removal efficiency of methylene blue (MB) and Cr(VI) mixed pollutants were systematically investigated in the cathode chamber. The results showed that after 12 h of light irradiation in the PMFC with WO3/MoS2/FTO as the photocathode, the removal rates of MB and Cr(VI) were 84.56 and 68.11 %, respectively, which were much higher than those using WO3/FTO as a photocathode (55.57 % and 45.26 %, respectively). The corresponding maximum output power was 33.14 mW/m2, which was 1.85 times that of the WO3/FTO photocathode PMFC. These results can be attributed to the fact that WO3 is an n-type semiconductor and MoS2 is a p-type semiconductor. Analysis of trapping experiments showed that the composite of WO3 and MoS2 formed a Z-scheme heterojunction, which improved the separation efficiency of the photoelectric carriers and enhanced the pollutant removal efficiency of the photocathode. PMFCs are a new and environment-friendly technology for removing pollutants thereby providing an experimental basis for future engineering applications.

Electrical Conductivities and Conduction Mechanism of Lithium-Doped High-Entropy Oxides at Different Temperature and Pressure Conditions.

Li-doped high-entropy oxides (Li-HEO) are promising electrode materials for Li-ion batteries. However, their electrical conduction in a wide range of temperatures and/or at high pressure is unknown, hindering their applications under extreme conditions. Especially, a clear understanding of the conduction mechanism is needed. In this work, we determined the carrier type of several Li-doped (MgCoNiCuZn)O semiconductor compounds and measured their electrical conduction at temperatures 79-773 K and/or at pressures up to 50 GPa. Three optical band gaps were uncovered from the UV-vis-NIR absorption measurements, unveiling the existence of defect energy levels near the valence band of p-type semiconductors. The Arrhenius-like plot of the electrical conductivity data revealed the electronic conduction in three temperature regions, i.e., the ionization region from 79 to 170 K, the extrinsic region from ∼170 to 300 K, and the intrinsic region at ≥300 K. The closeness of the determined electronic band gap and the second optical band gap suggests that the conduction electrons in the intrinsic region originate from a thermal excitation from the defect energy levels to the conduction band, which determines the electronic conductivity. It was also found that at or above room temperature, ionic conduction coexists with electronic conduction with a comparable magnitude at ambient pressure and that the intrinsic conduction mechanism also operates at high pressures. These findings provide us a fundamental understanding of the band structure and conduction mechanism of Li-HEO, which would be indispensable to their applications in new technical areas.

Dipolar Chemical Bridge Induced CsPbI3 Perovskite Solar Cells with 21.86 % Efficiency.

CsPbI3 perovskite receives tremendous attention for photovoltaic applications due to its ideal band gap and good thermal stability. However, CsPbI3 perovskite solar cells (PSCs) significantly suffer from photovoltage deficits because of serious interfacial energy losses within the PSCs, which to a large extent affects the photovoltaic performance of PSCs. Herein, a dipolar chemical bridge (DCB) is constructed between the perovskite and TiO2 layers to lower interfacial energy losses and thus improve the charge extraction of PSCs. The results reveal that the DCB could form a beneficial interfacial dipole between the perovskite and TiO2 layers, which could optimize the interfacial energetics of perovskite/TiO2 layers and thus improve the energy level alignment within the PSCs. Meanwhile, the constructed DCB could also simultaneously passivate the surface defects of perovskite and TiO2 layers, greatly lowering interfacial recombination. Consequently, the photovoltage deficit of CsPbI3 PSCs is largely reduced, leading to a record efficiency of 21.86 % being realized. Meanwhile, the operation stability of PSCs is also largely improved due to the high-quality perovskite films with released interfacial tensile strain being obtained after forming the DCB within the PSCs.

Study transport of hesperidin based on the DPPC lipid model and the BSA transport model.

Hesperidin (HE), a significant flavonoid polyphenolic compound present in citrus plants, exhibits diverse pharmacological effects. Considering the crucial involvement of biological membranes and transporter proteins in the transportation and biological processes of HE, it becomes essential to comprehend the potential mechanisms through which HE interacts with membranes and transporter proteins. In order to simulate the process of active molecule transport, a cell membrane model consisting of 1,2-dipalmitoyl-n-glycero-3-phosphatidylcholine (DPPC) and a transporter protein model of bovine serum albumin (BSA) were employed for investigation. The present study aimed to investigate the mechanism of action of hesperidin (HE) in DPPC and BSA using fluorescence quenching, Fourier transform infrared spectroscopy (FTIR), and differential scanning calorimetry (DSC). The localization and interaction of HE within liposomes were also elucidated. Furthermore, the binding of BSA and HE was analyzed through UV/Vis absorption spectroscopy, fluorescence spectroscopy, infrared spectroscopy, and computational biology techniques. Computational biology analysis revealed that the binding between HE and BSA primarily occurred via hydrogen bonding and hydrophobic interactions. This study aimed to investigate the role and mechanism of HE in the DPPC cell membrane model and the BSA transporter protein model, thereby offering novel insights into the action of HE in DPPC and BSA.

Lethal puncturing of planktonic Gram-positive and Gram-negative bacteria by magnetically-rotated silica hexapods.

Planktonic bacterial presence in many industrial and environmental applications and personal health-care products is generally countered using antimicrobials. However, antimicrobial chemicals present an environmental threat, while emerging resistance reduces their efficacy. Suspended bacteria have no defense against mechanical attack. Therefore, we synthesized silica hexapods on an α-Fe2O3 core that can be magnetically-rotated to inflict lethal cell-wall-damage to planktonic Gram-negative and Gram-positive bacteria. Hexapods possessed 600 nm long nano-spikes, composed of SiO2, as shown by FTIR and XPS. Fluorescence staining revealed cell wall damage caused by rotating hexapods. This damage was accompanied by DNA/protein release and bacterial death that increased with increasing rotational frequency up to 500 rpm. Lethal puncturing was more extensive on Gram-negative bacteria than on Gram-positive bacteria, which have a thicker peptidoglycan layer with a higher Young's modulus. Simulations confirmed that cell-wall-puncturing occurs at lower nano-spike penetration levels in the cell walls of Gram-negative bacteria. This approach offers a new way to kill bacteria in suspension, not based on antimicrobial chemicals.

SNF472: a novel therapeutic agent for vascular calcification and calciphylaxis.

Vascular calcification is a common complication in patients with chronic kidney disease (CKD) and is strongly associated with an increased risk of cardiovascular events and all-cause mortality. Calciphylaxis is a specific and life-threatening manifestation of vascular calcifications that usually affects individuals with advanced kidney function impairment or those undergoing dialysis. Currently, the treatment of vascular calcification and calciphylaxis in CKD lacks approved treatments and focuses on controlling risk factors. SNF472, the intravenous formulation of myo-inositol hexaphosphate, is a novel vascular calcification inhibitor currently undergoing phase 3 clinical trials, demonstrating its ability to directly inhibit the formation of calcium and phosphorus crystals, thereby blocking the production and deposition of ectopic calcium. The efficacy and safety of SNF472 in inhibiting vascular calcification have been confirmed in recent clinical studies. This review summarizes the results of studies related to SNF472 to provide a comprehensive overview of its mechanism of action, efficacy, safety, and ongoing clinical studies.