Solvent-Induced In(III)-MOFs with Controllable Interpenetration Degree Performing High-Efficiency Separation of CO2/N2 and CO2/CH4.

Herein, three In(III)-based metal-organic frameworks (In-MOFs) with different degrees of interpenetration (DOI), namely In-MOF-1, In-MOF-2, and In-MOF-3, constructed by In3+ and Y-shaped ligands 4,4',4″-s-triazine-2,4,6-triyltribenzoate (H3TATB), are successfully synthesized through the ionothermal/solvothermal method. Subsequently, three novel In-MOFs, including noninterpenetration polycatenation, 2-fold interpenetrated, and 4-fold interpenetrated structure, are employed as the platform for systematically investigating the separation efficiency of CO2/N2, CO2/CH4, and CO2/CH4/N2 mixture gas system. Among them, In-MOF-2 shows the highest CO2 uptake capacities at 298 K and simultaneously possesses the low adsorption enthalpy of CO2 (26.4 kJ/mol at low coverage), a feature desirable for low-energy-cost adsorbent regeneration. The CO2/N2 (v: v = 15/85) selectivity of In-MOF-2 reaches 37.6 (at 298 K and 1 bar), also revealing outstanding selective separation ability from flue gases and purifying natural gas, affording a unique robust separation material as it has moderate DOI and pore size. In-MOF-2 shows exceptional stability and feasibility to achieve reproducibility. Aperture adjustment makes In-MOF-2 a versatile platform for selectively capturing CO2 from flue gases or purifying natural gas.

Oxygen Transport through Amorphous Cathode Coatings in Solid-State Batteries.

All solid-state batteries (SSBs) are considered the most promising path to enabling higher energy-density portable energy, while concurrently improving safety as compared to current liquid electrolyte solutions. However, the desire for high energy necessitates the choice of high-voltage cathodes, such as nickel-rich layered oxides, where degradation phenomena related to oxygen loss and structural densification at the cathode surface are known to significantly compromise the cycle and thermal stability. In this work, we show, for the first time, that even in an SSB, and when protected by an intact amorphous coating, the LiNi0.5Mn0.3Co0.2O2 (NMC532) surface transforms from a layered structure into a rocksalt-like structure after electrochemical cycling. The transformation of the surface structure of the Li3B11O18 (LBO)-coated NMC532 cathode in a thiophosphate-based solid-state cell is characterized by high-resolution complementary electron microscopy techniques and electron energy loss spectroscopy. Ab initio molecular dynamics corroborate facile transport of O2- in the LBO coating and in other typical coating materials. This work identifies that oxygen loss remains a formidable challenge and barrier to long-cycle life high-energy storage, even in SSBs with durable, amorphous cathode coatings, and directs attention to considering oxygen permeability as an important new design criteria for coating materials.

Characterization of the MIKCC-type MADS-box gene family in blueberry and its possible mechanism for regulating flowering in response to the chilling requirement.

MAIN CONCLUSION: The expression peak of VcAP1.4, VcAP1.6, VcAP3.1, VcAP3.2, VcAG3, VcFLC2, and VcSVP9 coincided with the endo-dormancy release of flower buds. Additionally, GA4+7 not only increased the expression of these genes but also promoted flower bud endo-dormancy release. The MIKCC-type MADS-box gene family is involved in the regulation of flower development. A total of 109 members of the MIKCC-type MADS-box gene family were identified in blueberry. According to the phylogenetic tree, these 109 MIKCC-type MADS-box proteins were divided into 13 subfamilies, which were distributed across 40 Scaffolds. The results of the conserved motif analysis showed that among 20 motifs, motifs 1, 3, and 9 formed the MADS-box structural domain, while motifs 2, 4, and 6 formed the K-box structural domain. The presence of 66 pairs of fragment duplication events in blueberry suggested that gene duplication events contributed to gene expansion and functional differentiation. Additionally, the presence of cis-acting elements revealed that VcFLC2, VcAG3, and VcSVP9 might have significant roles in the endo-dormancy release of flower buds. Meanwhile, under chilling conditions, VcAP3.1 and VcAG7 might facilitate flower bud dormancy release. VcSEP11 might promote flowering following the release of endo-dormancy, while the elevated expression of VcAP1.7 (DAM) could impede the endo-dormancy release of flower buds. The effect of gibberellin (GA4+7) treatment on the expression pattern of MIKCC-type MADS-box genes revealed that VcAP1.4, VcAP1.6, VcAP3.1, VcAG3, and VcFLC2 might promote flower bud endo-dormancy release, while VcAP3.2, VcSEP11, and VcSVP9 might inhibit its endo-dormancy release. These results indicated that VcAP1.4, VcAP1.6, VcAP1.7 (DAM), VcAP3.1, VcAG3, VcAG7, VcFLC2, and VcSVP9 could be selected as key regulatory promoting genes for controlling the endo-dormancy of blueberry flower buds.

Fabrication of carbon-based materials derived from a cobalt-based organic framework for enhancing photocatalytic degradation of dyes.

The pyrolysis of metal-organic frameworks (MOFs) has emerged as a promising route to synthesize carbon/metal oxide-based materials with diverse phase compositions, morphologies, sizes and surface areas. In this paper, 1,3,5-benzoic acid (BTC) and 2,4,6-tri(4-pyridinyl)-1-pyridine (TPP) were used as ligands to prepare a novel cobalt-based MOF (Co-MOF) which was used as a precursor to obtain five carbon-based materials at different temperatures (Co-C200/400/600/800/1000). Furthermore, five dyes were used as degradation targets to investigate the photocatalytic degradation performance of the title materials under UV light irradiation. Co-C1000 exhibited the best photocatalytic degradation performance for methyl orange (MO), and the degradation rate could reach 99.21%. The enhanced photocatalytic activity was attributed to narrower band-gaps and a synergistic effect originating from the well-aligned straddling band structures between Co/CoO/Co3O4 and C, also resulting in a faster interfacial charge transfer during the photocatalytic reaction. This study will aid in the development of photocatalysts generated from carbon-based materials via the pyrolysis transformation of MOFs, therefore greatly enhancing the photocatalytic performance.

Nickel-Catalyzed Enantioselective Synthesis of Dienyl Sulfoxide.

Sulfoxides are widely used in the pharmaceutical industry and as ligands in asymmetric catalysis. However, the efficient asymmetric synthesis of this structural motif remains limited. In this study, we disclosed a Ni-catalyzed enantioconvergent reaction that utilizes both racemic allenyl carbonates and ß-sulfinyl esters. Our method employs cheap and more sustainable Ni(II) as a precatalyst and successfully overcomes the challenging poisoning effect and instability of sulfenate generated in situ. This enables the synthesis of a series of dienyl sulfoxides with enantioselectivity of up to 98 % ee. The product exhibits tremendous potential in various applications, including diastereoselective Diels-Alder reactions, coordination with transition metals, and incorporation into medicinal compounds, among others. Using a combination of experimental and computational methods, we have uncovered an interesting associated outersphere mechanism that contrasts with conventional mechanisms commonly observed in asymmetric transition metal catalysis.

One dimensional wormhole corrosion in metals.

Corrosion is a ubiquitous failure mode of materials. Often, the progression of localized corrosion is accompanied by the evolution of porosity in materials previously reported to be either three-dimensional or two-dimensional. However, using new tools and analysis techniques, we have realized that a more localized form of corrosion, which we call 1D wormhole corrosion, has previously been miscategorized in some situations. Using electron tomography, we show multiple examples of this 1D and percolating morphology. To understand the origin of this mechanism in a Ni-Cr alloy corroded by molten salt, we combined energy-filtered four-dimensional scanning transmission electron microscopy and ab initio density functional theory calculations to develop a vacancy mapping method with nanometer-resolution, identifying a remarkably high vacancy concentration in the diffusion-induced grain boundary migration zone, up to 100 times the equilibrium value at the melting point. Deciphering the origins of 1D corrosion is an important step towards designing structural materials with enhanced corrosion resistance.

Discrimination of the harvesting season of green tea by alcohol/salt-based aqueous two-phase systems combined with chemometric analysis.

The flavor and aroma quality of green tea are closely related to the harvest season. The aim of this study was to identify the harvesting season of green tea by alcohol/salt-based aqueous two-phase system (ATPS) combined with chemometric analysis. In this paper, the single factor experiments (SFM) and response surface methodology (RSM) optimization were designed to investigate and select the optimal ATPS. A total of 180 green tea samples were studied in this work, including 86 spring tea and 94 autumn tea. After the active components in green tea samples were extracted by the optimal ethanol/(NH4)2SO4 ATPS, the qualitative and quantitative analysis was realized based on HPLC-DAD combined with alternating trilinear decomposition-assisted multivariate curve resolution (ATLD-MCR) algorithm, with satisfactory spiked recoveries (86.00 %-112.45 %). The quantitative results obtained from ATLD-MCR model were subjected to chemometric pattern recognition analysis. The constructed partial least squares-discriminant analysis (PLS-DA) and orthogonal partial least squares-discriminant analysis (OPLS-DA) models showed better results than the principal component analysis (PCA) model, and the R2Xcum values (>0.835) and R2Ycum (>0.937) were close to 1, the Q2cum values were greater than 0.75 (>0.933), and the differences between R2Ycum and Q2cum were not larger than 0.2, indicating excellent cross-validation prediction performance of the models. Furthermore, the classification results based on the hierarchical clustering analysis (HCA) were consistent with the PCA, PLS-DA and OPLS-DA results, establishing a good correlation between tea active components and the harvesting seasons of green tea. Overall, the combination of ATPS and chemometric methods is accurate, sensitive, fast and reliable for the qualitative and quantitative determination of tea active components, providing guidance for the quality control of green tea.

Ionic Chiral Ferrocene Doped Cholesteric Liquid Crystal with Electronically Tunable Reflective Bandwidth performance.

Cholesteric liquid crystals (CLC) were widely used in optical devices as one-dimensional photonic crystals. However, their reflective bands cannot be adjusted, which limits their wide application in many fields. In this paper, a series of ionic chiral ferrocene derivatives (CD-Fc+) as dopants were designed and prepared, and their doping into negative liquid crystal matrix was investigated to develop cholesteric response liquid crystal composites with electrically tunable reflective bands. The effects of electric field frequency, voltage, retention time of voltage and molecular structure on the broadening of reflection bandwidth were investigated in detail.

Synthesis of a 2D Cu@TiO2 composite via the design of a 1D Cu-based coordination polymer precursor for efficient and selective photodegradation of dyes.

A 2D Cu@TiO2 composite with a porous and crystalline structure was successfully synthesized via one-step and low-temperature calcination of a 1D Cu-based coordination polymer (Cu-CP), namely [Cu2(3-dpha)(1,4-NDC)2(H2O)3] n (3-dpha = N,N'-bis(3-pyridyl)adipamide and 1,4-H2NDC = 1,4-naphthalenedicarboxylic acid). Moreover, the Cu@TiO2 membrane was fabricated by a simple filtration of the as-grown Cu@TiO2 composite. Compared with the benchmark TiO2 photocatalyst, the Cu@TiO2 composite material with high specific surface area and reduced photogenerated electron-hole ratio exhibited good photodegradation activity and durability for gentian violet (GV), which could be attributed to the combined effect of co-doping of Cu and TiO2 structure. Furthermore, the ˙OH and ˙O2 - radicals were predicted to dominate the photocatalytic process. Therefore, this new efficient photocatalyst is a promising candidate for efficient and selective photodegradation of organic pollutants.

Ni-catalyzed asymmetric hydrophosphinylation of conjugated enynes and mechanistic studies.

The catalytic asymmetric synthesis of P-stereogenic phosphines is an efficient strategy to access structurally diverse chiral phosphines that could serve as organocatalysts and ligands to transition metals and motifs of antiviral drugs. Herein, we describe a Ni catalyzed highly regio and enantioselective hydrophosphinylation reaction of secondary phosphine oxides and enynes. This method afforded a plethora of alkenyl phosphine oxides which could serve as valuable precursors to bidentate ligands. A new type of mechanism was discovered by combined kinetic studies and density functional theory (DFT) calculations, which was opposed to the widely accepted Chalk-Harrod type mechanism. Notably, the alkene moiety which could serve as a directing group by coordinating with the Ni catalyst in the transition state, plays a vital role in determining the reactivity, regio and enantioselectivity.

Enantioselective Reductive Divinylation of Unactivated Alkenes by Nickel-Catalyzed Cyclization Coupling Reaction.

Catalytic asymmetric dicarbofunctionalization of tethered alkenes has emerged as a promising tool for producing chiral cyclic molecules; however, it typically relies on aryl-tethered alkenes to form benzene-fused compounds. Herein, we report an enantioselective cross-electrophile divinylation reaction of nonaromatic substrates, 2-bromo-1,6-dienes. The approach thus offers a route to new chiral cyclic architectures, which are key structural motifs found in various biologically active compounds. The reaction proceeds under mild conditions, and the use of chiral t-Bu-pmrox and 3,5-difluoro-pyrox ligands resulted in the formation of divinylated products with high chemo-, regio-, and enantioselectivity. The method is applicable for the incorporation of chiral hetero- and carbocycles into complex molecules.

[Diversity of bacteria and allelopathic potential of their metabolites in differently aged Casuarina equisetifolia litter]. / æµ·å—å²›ä¸åŒæž—é¾„æœ¨éº»é»„å‡‹è½ç‰©å† å¤–ç»†èŒå¤šæ ·æ€§åŠå ¶åŒ–æ„Ÿæ½œåŠ›.

Litter plays an important role in ecosystems. To compare the diversity and community structure of microorganisms inside and outside litter, Casuarina equisetifolia were selected from three forests in Guilin coastal area of Haikou City, Hainan Province. Illumina Miseq high-throughput sequencing was used to analyze the diversity and composition of epiphytic and endophytic bacteria of litter. The results showed that the diversity of epiphytic bacteria was higher than that of endophytic bacteria. Moreover, the diversity and richness of bacteria inside and outside C. equisetifolia litter in the intermediate-aged forest were the highest, followed by young forest and mature forest. Proteobacteria and Actinobacteria were the most abundant at the phylum level, accounting for about 80% of the total. At the genus level, Curtobacterium, Jatrophihabitans, Mycobacterium, Actinomycetospora, Mucilaginibacter and Pseudomonas showed significant variation among different forest ages. PCoA results showed that the endophytic bacteria of litter were greatly affected by forest age, while the epiphytic bacteria were greatly affected by environmental factors. The fermentation broth of Bacillus amyloliquefaciens had the strongest allelopathic potential to C. equisetifolia seeds and 2,2'-methylenebis (6-tert-butyl-4-methyl-phenol) was found in it, indicating that B. amyloliquefaciens was involved in the synthesis of allelochemicals. The diversity of litter microbial community affected the allelopathy of C. equisetifolia, which laid a foundation for studying the role of microorganisms in the degradation process of C. equisetifolia litter.

Allylboronates from Vinyl Triflates and α-Chloroboronates by Reductive Nickel Catalysis.

Allylboronates are unique building blocks widely used in organic synthesis, but the construction of cyclic allylboranates remains a challenging subject. We demonstrate here a mild and efficient access to this type of compound through the cross-electrophile coupling of vinyl triflates and α-chloroboronates. The reaction proceeded with a good substrate scope and good functional group compatibility. The ready availability of vinyl triflates from ketones, as well as the rich chemistry of allylboranates, makes our method suitable for the divergent modification of biologically active compounds. Preliminary mechanistic studies revealed that α-chloroboronates were activated via a radical process.

In-situ resonant band engineering of solution-processed semiconductors generates high performance n-type thermoelectric nano-inks.

Thermoelectric devices possess enormous potential to reshape the global energy landscape by converting waste heat into electricity, yet their commercial implementation has been limited by their high cost to output power ratio. No single "champion" thermoelectric material exists due to a broad range of material-dependent thermal and electrical property optimization challenges. While the advent of nanostructuring provided a general design paradigm for reducing material thermal conductivities, there exists no analogous strategy for homogeneous, precise doping of materials. Here, we demonstrate a nanoscale interface-engineering approach that harnesses the large chemically accessible surface areas of nanomaterials to yield massive, finely-controlled, and stable changes in the Seebeck coefficient, switching a poor nonconventional p-type thermoelectric material, tellurium, into a robust n-type material exhibiting stable properties over months of testing. These remodeled, n-type nanowires display extremely high power factors (~500 µW m-1K-2) that are orders of magnitude higher than their bulk p-type counterparts.

Ni-Catalyzed Asymmetric Allylation of Secondary Phosphine Oxides.

A nickel-catalyzed asymmetric allylation of secondary phosphine oxides (SPO) for the synthesis of tertiary phosphine oxides (TPO) was realized with high enantioselectivity. The dynamic kinetic asymmetric transformation of SPO was accomplished in the presence of nickel complex. By elucidating the absolute configurations of the reacted SPO starting material and the TPO product, we confirmed that the allylation reaction proceeded through a P-stereo retention process. The protocol represents the first example of synthesizing P-stereogenic phosphine oxides by allylation reaction.

Construction of (3,8)-connected three-dimensional cobalt(II) and copper(II) coordination polymers with 1,3-bis[(1,2,4-triazol-4-yl)methyl]benzene and benzene-1,3,5-tricarboxylate ligands.

Coordination polymers (CPs) have been widely studied because of their diverse and adjustable topologies and wide-ranging applications in luminescence, chemical sensors, magnetism, photocatalysis, gas adsorption and separation. In the present work, two coordination polymers, namely poly[(µ5-benzene-1,3,5-tricarboxylato-κ6O1:O1':O3:O3:O5,O5'){µ3-1,3-bis[(1,2,4-triazol-4-yl)methyl]benzene-κ3N:N':N''}di-µ3-hydroxido-dicobalt(II)], [Co2(C9H3O6)(OH)(C12H12N6)]n or [Co2(btc)(OH)(mtrb)]n, (1), and poly[[diaquabis(µ3-benzene-1,3,5-tricarboxylato-κ3O1:O3:O5)bis{µ3-1,3-bis[(1,2,4-triazol-4-yl)methyl]benzene-κ3N:N':N''}tetra-µ3-hydroxido-tetracopper(II)] monohydrate], {[Cu4(C9H3O6)2(OH)2(C12H12N6)2(H2O)2]·H2O}n or {[Cu4(btc)2(OH)2(mtrb)2(H2O)2]·H2O}n, (2), were synthesized by the hydrothermal method using 1,3-bis[(1,2,4-triazol-4-yl)methyl]benzene (mtrb) and benzene-1,3,5-tricarboxylate (btc3-). CP (1) exhibits a (3,8)-coordinated three-dimensional (3D) network of the 3,8T38 topological type, with a point symbol of {4,5,6}2{42·56·616·72·82}, based on the tetranuclear hydroxide cobalt(II) cluster [Co4(µ3-OH)2]. CP (2) shows a (3,8)-coordinated tfz-d topology, with a point symbol of {43}2{46·618·84}, based on the tetranuclear hydroxide copper(II) cluster [Cu4(µ3-OH)2]. The different (3,8)-coordinated 3D networks based on tetranuclear hydroxide-metal clusters of (1) and (2) are controlled by the different central metal ions [CoII for (1) and CuII for (2)]. The thermal stabilities and solid-state optical diffuse-reflection spectra were measured. The energy band gaps (Eg) obtained for (1) and (2) were 2.72 and 2.29 eV, respectively. CPs (1) and (2) exhibit good photocatalytic degradation of the organic dyes methylene blue (MB) and rhodamine B (RhB) under visible-light irradiation.

[Relationship between HLA Gene Polymorphism and Aplastic Anemia in Northern Chinese Han Patients].

OBJECTIVE: To explore the relationship between HLA-A, -B, -C, -DRB1, -DQB1 gene polymorphism and aplastic anemia （AA）of 65 cases in Northern China. METHODS: The high resolution genotyping of HLA-A, -B, -C, -DRB1, -DQB1 alleles in 65 AA patients and 772 healthy controls was performed with polymerase chain reaction-sequence specific oligonucleotide (PCR-SSO), the relationship between HLA-A, -B, -C, -DRB1, -DQB1 gene polymorphism and aplastic anemia was analyzed by Pearson Chi-square，Continuity Correction， Two-sided Fisher's Exact Test and Odds Ratio. RESULTS: The HLA-B*1302（10% vs 4.21%）, B*3501（7.69% vs 3.89%）, DRB1* 0701（10% vs 4.73%）, DRB1*0901（19.23% vs 7.58%）, DQB1*0202（9.23% vs 3.76%） gene frequency in AA patients was higher than those in health controls, the difference was statistically significant (P<0.05), the χ2 were 9.049, 4.336, 6.838, 20.974 and 8.968, OR ratio was 2.528, 2.061, 2.239, 2.904 and 2.605. However, the HLA-A*3303（1.54% vs 6.93%）, DQB1*0302（1.54% vs 6.02%） gene frequency in AA patients was lower than those in healthy controls, the difference was statistically significant (P<0.05), the χ2 was 5.726 and 4.505, the OR ratio were 0.210 and 0.244. CONCLUSION: The polymorphism of HLA-A, -B, -DRB1, -DQB1 alleles is associate with AA in these patient cases, the HLA-B*1302, HLA-B*3501, HLA-DRB1*0701, HLA-DRB1*0901 and HLA-DQB1*0202 may be sensitive genes to AA, while the HLA-A*3303 and HLA-DQB1*0302 may be protective genes on AA.

A bifunctional cationic metal-organic framework based on unprecedented nonanuclear copper(ii) cluster for high dichromate and chromate trapping and highly efficient photocatalytic degradation of organic dyes under visible light irradiation.

A bifunctional cationic metal-organic framework {[Cu9(OH)6Cl2(itp)6(1,4-bdc)3](NO3)2(OH)2·20H2O}n (1-NO3-OH·20H2O) was synthesized and characterized (itp = 1-imidazol-1-yl-3-(1,2,4-triazol-4-yl)propane, 1,4-bdc = 1,4-benzenedicarboxylate). In 1-NO3-OH·20H2O, three [Cu3(µ3-OH)(µ2-OH)] trimeric clusters are bridged by two µ3-Cl and form a [Cu9(µ3-OH)3(µ2-OH)3(µ3-Cl)2] cluster. Such a nonanuclear copper(ii) cluster [Cu9(µ3-OH)3(µ2-OH)3(µ3-Cl)2] has not been reported till now, at least to the best of our knowledge. 1-NO3-OH·20H2O showed a 6-connected 2D 36-hxl net based on a nonanuclear copper(ii) cluster [Cu9(µ3-OH)3(µ2-OH)3(µ3-Cl)2]. 1-NO3-OH·20H2O is also the first 2D 36-hxl net-based nonanuclear cluster. 1-NO3-OH (guest-free phase) showed fast and highly efficient Cr2O72- and CrO42- trapping, and good recyclability for capturing Cr2O72- and CrO42-. The adsorption capacities of 1-NO3-OH to capture Cr2O72- and CrO42- were 1.762 mol mol-1 (154.8 mg g-1) and 1.896 mol mol-1 (89.5 mg g-1), respectively, at a molar ratio of 1 : 2 (1-NO3-OH to 2.5 × 10-3 mol L-1 Cr2O72- or CrO42-). 1-NO3-OH exhibited the selective sorption of Cr2O72- or CrO42- from a solution containing a mixture of Cr2O72- or CrO42- and a ten-fold molar amount of ClO4-, NO3-, Cl-, BF4- or a five-fold molar amount of mol L-1 SO42-. 1-NO3-OH could capture 87.9% dilute Cr2O72- or 91.8% dilute CrO42- at an equimolar 1-NO3-OH to 20 ppm Cr2O72- or CrO42-. 1-NO3-OH·20H2O exhibited a highly efficient photocatalytic degradation of the cationic organic dyes methylene blue (MB) and rhodamine B (RhB) under visible light irradiation, and was shown to be a good photocatalyst for photocatalytic degradation of the cationic organic dyes.

A luminescent zinc(ii) coordination polymer with unusual (3,4,4)-coordinated self-catenated 3D network for selective detection of nitroaromatics and ferric and chromate ions: a versatile luminescent sensor.

A zinc(ii) coordination polymer {[Zn3(mtrb)3(btc)2]·3H2O}n (1) was synthesized and characterized (mtrb = 1,3-bis(1,2,4-triazole-4-ylmethyl)benzene, btc = 1,3,5-benzenetricarboxylate). The polymer 1 shows an unusual (3,4,4)-coordinated self-catenated 3D network with the point symbol of {63}2{62·82·102}{64·82}2. The polymer 1 is the first luminescent sensor for the detection of 2-amino-4-nitrophenol (ANP). The polymer 1 is also a good luminescence sensor for detection of TNP, 2,4-DNP, 4-NP, ANP and 2-NP in MeOH, particularly for TNP. The order of detection efficiency is TNP > 2,4-DNP > 4-NP > ANP > 2-NP. The polymer 1 also exhibits high sensitivity and selectivity as a luminescence sensor for the detection of Fe3+, Cr2O72- and CrO42- in aqueous solution. Our experiments showed that the presence of interfering ions had no significant effect on the sensing of Fe3+, Cr2O72- or CrO42- ions. The detection limits for TNP, ANP, Fe3+, Cr2O72- and CrO42- are 0.22 µM, 4.12 µM, 1.78 µM, 2.83 µM, and 4.52 µM, respectively. The luminescence sensor is stable and can be recycled for detection at least five times. The possible quenching mechanisms are discussed. The polymer 1 is also an effective photocatalyst for degradation of methylene blue (MB) under visible or UV light irradiation.

Toward a rational photocatalyst design: a new formation strategy of co-catalyst/semiconductor heterostructures via in situ exsolution.

A new "post-growth" approach to implant metal sulfide nanodots (<5 nm) with high population and uniform dispersion into a semiconductor parent matrix was reported. The encapsulation modality of nanodot co-catalysts grants enhanced visible light absorption and photocatalytic performance, which provides another route for hetero-architecture materials design.