Towards Negative Emissions: Hydrothermal Carbonization of Biomass for Sustainable Carbon Materials.

The contemporary production of carbon materials heavily relies on fossil fuels, contributing significantly to the greenhouse effect. Biomass is a carbon-neutral resource whose organic carbon is formed from atmospheric CO2. Employing biomass as a precursor for synthetic carbon materials can fix atmospheric CO2 into solid materials, achieving negative carbon emissions. Hydrothermal carbonization (HTC) presents an attractive method for converting biomass into carbon materials, by which biomass can be transformed into materials with favorable properties in a distinct hydrothermal environment, and these carbon materials have made extensive progress in many fields. However, the HTC of biomass is a complex and interdisciplinary problem, involving simultaneously the physical properties of the underlying biomass and sub/supercritical water, the chemical mechanisms of hydrothermal synthesis, diverse applications of resulting carbon materials, and the sustainability of the entire technological routes. This review starts with the analysis of biomass composition and distinctive characteristics of the hydrothermal environment. Then, the factors influencing the HTC of biomass, the reaction mechanism, and the properties of resulting carbon materials are discussed in depth, especially the different formation mechanisms of primary and secondary hydrochars. Furthermore, the application and sustainability of biomass-derived carbon materials are summarized, and some insights into future directions are provided.

Different reactor configurations for enhancement of CO2 methanation.

Greenhouse gas emissions are a massive concern for scientists to minimize the effect of global warming in the environment. In this study, packed bed, coated wall, and membrane reactors were investigated using three novel nickel catalysts for the methanation of CO2. CFD modelling methodologies were implemented to develop 2D models. The validity of the model was investigated in a previous study where experimental and simulated results in a packed bed reactor were in a good agreement. It was observed that the coated wall reactor had poorer performance compared to the packed bed, approximately 30% difference between the results, as the residence time of the former was lower. In addition, two membrane configurations were proposed, including a membrane packed bed and membrane coated wall reactor. Additional studies were performed in the coated wall reactor revealing that lower flow rates lead to higher conversion values. As for the bed thickness the optimum layer was found to be 1 mm. In both membrane reactor configurations, the effect of the thickness of M1 membrane, which indicates the membrane for the removal of H2O, didn't show difference while the reduction of the thickness of M2 membrane, which indicates the membrane for the removal of CO2, H2 and H2O, showed better results in terms of conversion.

Soil science and environmental research.

As indicated in the call for papers posted for this Special Issue, Soil Science deals with various environmental compartments, so it is closely related to Environmental Research. It is clear that synergisms and collaboration are keys to reach the most fruitful relations among different sciences and scientists, and especially in all that focused on the Environment. In this line, considering Soil Science, Environmental Research, and the multiple and complex eventual combinations involving them, could give new highly interesting works focused on any of the specific subjects covered, as well as on relations among these sciences. The main objective should be going further in positive interactions that could help in protecting the Environment, proposing solutions to face hazards that are drastically threatening our planet. In view of that, the Editors of this Special Issue invited researchers to submit high-quality manuscripts including new experimental data, as well as scientifically founded discussion and reflections on the matter. The VSI has received 171 submissions, with 27% of them being accepted after peer-review. The Editors think that the papers included in this VSI have high scientific value and provide scientific knowledge on the field. In this editorial piece the Editors include comments and reflections on the papers published in the SI.

Editorial on the Topic "New Research on Detection and Removal of Emerging Pollutants".

With the Topic "New Research on Detection and Removal of Emerging Pollutants" (https://www [...].

Removal of emerging pollutants from the environment: From bioadsorbents to nanoparticle-based systems.

In the Call for Papers corresponding to this Virtual Special Issue (VSI), the Editors indicated that, as is well known, emerging pollutants include a variety of substances that pose remarkable risks for the environment and public health. In fact, emerging pollutants are considered a matter of concern deserving increasing efforts to elucidate their occurrence, fate, repercussions, and alternatives to their removal from the various environmental compartments where they can be found after spreading as contaminants. Also, the Editors commented that, among the various alternatives that can be considered for achieving their successful removal, some of them are based on the use of sorbent materials, and, specifically, bioadsorbents, which are attractive due to the efficacy and low cost associated with some of them. Another alternative is related to the utilization of nanoparticle-based systems, which may be considered a promising field of research in this way. In both cases, obtaining new research results, as well as designing and programming new ways of going steps ahead in the investigation of both kinds of materials, would be key objectives. According to the previous considerations, the Editors of the VSI invited researchers having new data concerning these aspects to submit manuscripts with experimental results, discussion, reflections and prospective related to their work. With the Special Issue closed, the number of submissions received was 83, with 40 high-quality works being accepted for publication, increasing the overall knowledge on this topic by providing results that we are sure will be of value for the scientific community and the society.

Biochar production with amelioration of microwave-assisted pyrolysis: Current scenario, drawbacks and perspectives.

In recent years, biomass has been reported to obtain a wide range of value-added products. Biochar can be obtained by heating biomass, which aids in carbon sinks, soil amendments, resource recovery, and water retention. Microwave technology stands out among various biomass heating technologies not only for its effectiveness in biomass pyrolysis for the production of biochar and biofuel but also for its speed, volumetrics, selectivity, and efficiency. The features of microwave-assisted biomass pyrolysis and biochar are briefly reviewed in this paper. An informative comparison has been drawn between microwave-assisted pyrolysis and conventional pyrolysis. It focuses mainly on technological and economic scenario of biochar production and environmental impacts of using biochar. This source of knowledge would aid in the exploration of new possibilities and scope for employing microwave-assisted pyrolysis technology to produce biochar.

Life cycle assessment of combustion-based electricity generation technologies integrated with carbon capture and storage: A review.

Carbon capture and storage (CCS) is the key technology to reduce CO2 emissions from the conventional power systems. CCS has the flexibility, compatibility, and great potential to reduce emissions when combined with the current energy infrastructure. Through quantifying the environmental benefits of the combustion-based electricity generation system with CCS by life cycle assessment (LCA), decision-makers can grasp the contribution of upstream and downstream processes to various environmental impacts, a better trade-off between climate change and non-climate impact categories. This work reviews the LCA research on the combustion-based electricity generation system integrated with CCS in the past 10 years. These studies show that CCS can reduce the direct CO2 emissions from power plants by nearly 90%. While CCS effectively mitigates climate change, it also increases other environmental impacts to varying degrees and results in energy penalty of 15-44%. The actual greenhouse gas of the power plant is reduced by 40-80%. We further analyze a series of key issues involved in the LCA of the combustion-based electricity generation system integrated with CCS, including the functional unit, basic assumptions, system boundaries and assessment methods. Time span and the leakage need to be considered by researchers in LCA. The perspective of research needs to shift from the specific application of a single CCS to the impact assessment of large-scale deployment, and a single environment or economic discipline to interdisciplinary assessment. It is more cost-effective to realize the coordinated emission reduction between the power plant and the upstream and downstream supply chain.

Sustainable development in period of COVID-19 pandemic.

COVID-19 pandemic has shown that sustainable development of energy, water and environment systems is essential for the basic life needs of humankind. Logistics problems, shortage of resources and goods, a crisis of traditional energy systems, all these COVID-19 caused problems show that available resources should be used with caution. This paper is an introduction article to the Virtual Special Issue that discusses some of the latest developments in three research topic areas, namely Energy, Water and Environment. These research topics emerged from the four Sustainable Development of Energy, Water and Environment Systems Conferences held in 2020. The purpose of the introduction article is to provide a brief introduction to the field and the articles included in this Journal of Cleaner Production Virtual Special Issue.

Membranes for Gas Separation.

Gas separation is of significant importance for many industrial processes including chemical purification, carbon capture, and fuel production [...].

Aerobic granular sludge (AGS) scouring to mitigate membrane fouling: Performance, hydrodynamic mechanism and contribution quantification model.

Aerobic granular sludge (AGS) has been proven to have a low fouling potential in membrane bioreactor (MBR). Nevertheless, AGS scouring effect on mitigating membrane fouling remains poorly investigated. The main objective of this study is to examine AGS-MBR performance, to reveal the AGS scouring mechanism and quantify its contribution rate to membrane fouling mitigation, from the views of theory and experiment. Above all, AGS-MBR exhibited a low fouling rate ((transmembrane pressure (TMP) kept below 20 kPa) without membrane cleaning and a higher removal of organics and nutrients than conventional MBR during 80 days' sludge granulation process. Then, flocculent sludge (FS) with various AGS ratios was applied to simulate the sludge granulation phase. When AGS ratio increased from 0% to 100%, the permeate flux gradually elevated from 40.0 L m-2h-1 to 92.9 L m-2h-1, and fouling resistance decreased from 9.0 × 10-12m-1 to 3.9 × 10-12m-1 benefiting from the loose structure and high porosity of AGS fouling layer. Meanwhile, the scouring effect produced by AGS on the membrane fouling mitigation was investigated. Based on the momentum conservation, a new hydrodynamic model was developed to explain the scouring mechanism of AGS. The scouring stress, proportional to the total amount of AGS depositing on the membrane surface, effectively reinforced the collision between AGS and FS, and reduced their deposition on the membrane surface by friction with the membrane; thus it was further conducive to membrane fouling mitigation. Moreover, a novel contribution quantification model was proposed for analyzing the contribution rate of AGS scouring effect to mitigate membrane fouling. AGS scouring possessed a significant contribution rate (39.9%) for fouling mitigation, compared with AGS structure (50.3%) and hydraulic stress (9.7%). In final, this study provides an in-depth understanding to mitigate the MBR membrane fouling by the unique advantages of sludge granulation.

Research Progress in Gas Separation Using Hollow Fiber Membrane Contactors.

In recent years, gas-liquid membrane contactors have attracted increasing attention. A membrane contactor is a device that realizes gas-liquid or liquid-liquid mass transfer without being dispersed in another phase. The membrane gas absorption method combines the advantages of chemical absorption and membrane separation, in addition to exhibiting high selectivity, modularity, and compactness. This paper introduces the operating principle and wetting mechanism of hollow membrane contactors, shows the latest research progress of membrane contactors in gas separation, especially for the removal of carbon dioxide from gas mixtures by membrane contactors, and summarizes the main aspects of membrane materials, absorbents, and membrane contactor structures. Furthermore, recommendations are provided for the existing deficiencies or unsolved problems (such as membrane wetting), and the status and progress of membrane contactors are discussed.

A Review on Reverse Osmosis and Nanofiltration Membranes for Water Purification.

Sustainable and affordable supply of clean, safe, and adequate water is one of the most challenging issues facing the world. Membrane separation technology is one of the most cost-effective and widely applied technologies for water purification. Polymeric membranes such as cellulose-based (CA) membranes and thin-film composite (TFC) membranes have dominated the industry since 1980. Although further development of polymeric membranes for better performance is laborious, the research findings and sustained progress in inorganic membrane development have grown fast and solve some remaining problems. In addition to conventional ceramic metal oxide membranes, membranes prepared by graphene oxide (GO), carbon nanotubes (CNTs), and mixed matrix materials (MMMs) have attracted enormous attention due to their desirable properties such as tunable pore structure, excellent chemical, mechanical, and thermal tolerance, good salt rejection and/or high water permeability. This review provides insight into synthesis approaches and structural properties of recent reverse osmosis (RO) and nanofiltration (NF) membranes which are used to retain dissolved species such as heavy metals, electrolytes, and inorganic salts in various aqueous solutions. A specific focus has been placed on introducing and comparing water purification performance of different classes of polymeric and ceramic membranes in related water treatment industries. Furthermore, the development challenges and research opportunities of organic and inorganic membranes are discussed and the further perspectives are analyzed.

Understanding the effect of Ca and Mg ions from wastes in the solvent regeneration stage of a biogas upgrading unit.

This paper reveals the effect of calcium and magnesium ions in carbonation experiments carried out to regenerate sodium hydroxide from a biogas upgrading unit. This novel study arises as an alternative to standard physical process whose elevated energy consumption imposes economic restrictions. Previous works employed alkaline waste to turn them into value added product. Nevertheless, no attractive economical results were obtained due to the low regeneration efficiencies. Our hypothesis is that both calcium and magnesium waste composition percentages have an impact in the result, hence this work propose an isolated study aiming to determine the of each one in the global performance. To this end, the operational parameters (reaction time, reaction temperature and molar ratio) were tuned as well as physicochemical properties of the final solid samples were analyzed by several techniques. The results indicate that calcium is much more prone than magnesium to reach high efficiencies in aqueous carbonation experiments. Additionally, higher quality products were achieved with calcium. The results of this study suppose an important step for understanding the aqueous carbonation through waste in the path to achieve a more sustainable city and society.

Potential of tri-reforming process and membrane technology for improving ammonia production and CO2 reduction.

In this work, a tri-reforming process was coupled with a membrane separation unit to enhance efficiency of ammonia (NH3) synthesis process in terms of CO2 emission, NH3 production, and NOx emission. Primary and secondary reformers were replaced by a tri-reforming process, while a Perovskite membrane was applied to separate nitrogen (N2) from oxygen (O2). A conventional NH3 synthesis process and the proposed process were simulated by Aspen-Hysys and compared in order to investigate the performance of the proposed sterategy. The simulation results indicated that when temperature increased and pressure decreased, conversion of hydrocarbons and H2/CO ratio were improved from 1.73 to 2.54, which resulted in an increase in NH3 production by 27 %, and a decrease in CO2 emission rate from 1192 kg/h to approximately 1 kg/h. The proposed sterategy was optimized in terms of different parameters e.g., temperature and pressure. Optimum reaction pressure and temperature were determined to be between 1 and 10 bar and 500-800 °C, respectively. The results of the study revealed that the proposed strategy not only removed amine and methanol sweeteners which reduce the operational costs of the process, but also decreased the NOx content from 8220 ppm to almost 10 ppm.

Nanostructured Membrane Materials for CO2 Capture: A Critical Review.

To mitigate carbon emission from the combustion of fossil fuels, membrane is advantageous due to the fact that membrane is a thin interphase acting as a selective barrier separating two phases. This thinness, typically in the range of 100 nm to a few micrometers, provides an almost natural platform to implement functional nanostructures. In this review, the recent progress in nanostructured membrane materials for CO2 capture will be discussed, including applications in flue gas decarbonizing (CO2/N2 separation) and syngas purification (CO2/H2 separation). In addition, the fundamentals of membrane technologies are also introduced. The reviewed nanostructure formation is confined to solid state materials, including polymer with intrinsic microporosity, carbon-based membranes, zeolite, and metal organic framework.

Biomimetic dynamic membrane for aquatic dye removal.

This study utilized physical adsorption and filtration of carbon nanotubes (CNTs) and laccases to fabricate biomimetic dynamic membrane (BDM) for the advanced treatment of dye wastewater. In BDM, the adsorption, enzymatic degradation and membrane separation demonstrated a synergism effect on pollutant removal. At first, the fabrication methods of BDM were investigated, and the mixed filtration for laccases and CNTs showed a better performance than the stepwise filtration. Furthermore, the operation parameters of BDM, including CNTs and laccase loading amounts, dye concentration, agitation speed and transmembrane pressure (TMP), were studied. Suitable CNTs and laccase amounts could reduce filtration resistance and increase catalysis efficiency, while moderate TMP and agitation speed were in favor of boosting the BDM structure for catalysis and permeability. Optimized operation parameters (CNT loading amount = 20 g m-2, laccase loading amount = 74.6 g m-2, agitation speed = 100 rpm, and TMP = 1.0 bar) sustained a high removal rate, and the flux was over 120 L m-2 h-1, even for 7 operation cycle' tests. BDM exhibited an excellent dye removal rate, stable flux and great antifouling capacity, on the ground that adsorption saturation and foulant may be alleviated "online and in-situ" by the enzymatic degradation. Afterwards, the bionic layer on BDM, after absorption saturation and catalyst deactivation, could be eliminated rapidly by carrying out a simple backwash cleaning operation, then a new one could be fabricated immediately. Therefore, BDM is a good candidate for functional membrane materials in future water treatment.

A review on agro-industrial waste (AIW) derived adsorbents for water and wastewater treatment.

There is a large amount of studies surrounding the usage of agro-industrial waste (AIW) for the adsorptions of organic pollutants (dyes) and inorganic pollutants (heavy metals) in water/wastewater. This method is normally treated as an alternative approach to the conventional water/wastewater treatment. However, there are some increasing interests for investigators to identify novel adsorption materials for pollutants removal. It is particularly noteworthy that most AIW wastes are not currently used at the original state, but modified in a variety of ways to reinforce the porosity and adsorption surface area of the material. Nanostructuring, activation, carbonization, and grafting are some common modification technologies of agricultural waste adsorbents. Besides, the characteristic, preparation and application of adsorbents from various industrial wastes, including natural materials and biosorbents, were summarized. Additionally, the challenges and perspectives for future researches of waste-derived adsorbents were studied. This review provides an important insight on using AIWs as precursor materials for preparing adsorbents in water/wastewater treatment.

Functional Group Effects on the HOMO⁻LUMO Gap of g-C3N4.

Graphitic carbon nitride (g-C3N4) is a promising semiconductor material which has been widely studied in nanoscience. However, the effect of modifying the performance of g-C3N4 is still under debate. In this communication, we show the size and functional group effects on the g-C3N4 using density functional theory (DFT) calculations. It was found that a molecule with six repeated g-C3N4 units (g-C3N4-6) could be the smallest unit that converges to the limit of its HOMO⁻LUMO gap. Calculations of g-C3N4-6 with varying numbers of substituted C≡N, C=O, and O-H functional groups show that C≡N and C=O could narrow down the HOMO⁻LUMO gap, while O-H could slightly raise the gap. This study shows that the change of substituents could tune the band gap of g-C3N4, suggesting that rationally modifying the substituent at the edge of g-C3N4-based materials could help to significantly increase the photocatalytic properties of a metal-free g-C3N4.

High-efficiency nutrients reclamation from landfill leachate by microalgae Chlorella vulgaris in membrane photobioreactor for bio-lipid production.

Using microalgae to treat landfill leachate is a promising approach due to the effective nutrients reclamation ability and additional profit of bio-lipid production. To offset the negative effect of landfill leachate on microalgae cells, a membrane photobioreactor (m-PBR) was adopted in the study, in which microalgae biomass concentration was improved from 0.66 in traditional photobioreactor (T-PBR) to 0.95 g/L. Nutrients reclamation efficiencies of leachate were analyzed according to elemental balance, and the results showed that nitrogen reclamation efficiency was generally lower than 50% while phosphorus reclamation efficiency was higher than 70% due to elemental availability. The nitrogen and phosphorus reclamation efficiencies in the m-PBR were much higher than that in the T-PBR. Besides, lipid produced from the m-PBR had a high cetane number of 60.96% and low linolenic acid content of 8.32%, which demonstrated good combustion properties of the microalgae-based lipid when using landfill leachate as nutrients source.