ABSTRACT
Increasing the soybean-planting area and increasing the soybean yield per unit area are two effective solutions to improve the overall soybean yield. Northeast China has a large saline soil area, and if soybeans could be grown there with the help of isolated saline-tolerant rhizobia, the soybean cultivation area in China could be effectively expanded. In this study, soybeans were planted in soils at different latitudes in China, and four strains of rhizobia were isolated and identified from the soybean nodules. According to the latitudes of the soil-sampling sites from high to low, the four isolated strains were identified as HLNEAU1, HLNEAU2, HLNEAU3, and HLNEAU4. In this study, the isolated strains were identified for their resistances, and their acid and saline tolerances and nitrogen fixation capacities were preliminarily identified. Ten representative soybean germplasm resources in Northeast China were inoculated with these four strains, and the compatibilities of these four rhizobium strains with the soybean germplasm resources were analyzed. All four isolates were able to establish different extents of compatibility with 10 soybean resources. Hefeng 50 had good compatibility with the four isolated strains, while Suinong 14 showed the best compatibility with HLNEAU2. The isolated rhizobacteria could successfully establish symbiosis with the soybeans, but host specificity was also present. This study was a preliminary exploration of the use of salinity-tolerant rhizobacteria to help the soybean nitrogen fixation in saline soils in order to increase the soybean acreage, and it provides a valuable theoretical basis for the application of saline-tolerant rhizobia.
ABSTRACT
The flammability and gas barrier properties are essential for package material. Herein, a highly-oriented self-assembly nanocoating composed of polyvinyl alcohol (PVA) and montmorillonite (MMT) was prepared for endowing polyethylene terephthalate (PET) films with excellent flame retardancy and gas barrier properties. The specific regular nanosheet structure of the PVA/MMT composite nanocoating was confirmed by Fourier transform infrared (FTIR) and X-ray diffraction (XRD). Thermogravimetric analysis (TGA) and the vertical burning test (VBT) suggested that the thermal stability and flame-retardancy of the coated PET films were considerably improved with more pick-up of the resulting nanocoating. When reaching 650 °C, there was still 22.6% char residual left for coated PET film, while only 6% char residual left for pristine PET film. During the vertical burning test, the flame did not spread through the whole PET film with the protection of PVA/MMT nanocoating, and no afterflame was observed. Scanning electron microscopy (SEM) is consistent with vertical burning test, proving that the thermal stability and flame retardancy of coated PET films were considerably enhanced with the increment of PVA/MMT. Thanks to the multi-layer structure, PVA/MMT nanocoating could effectively improve the gas barrier properties of PET films, and the oxygen vapor transmittance rate and water vapor transmittance rate of PET films were more than four hundred times lower and 30% lower than those of neat PET film. Our work demonstrates that bi-functional flame retardant and gas barrier materials could be gained via constructing inorganic/organic highly-oriented self-assembly nanocoating, which is promising in the area of packaging.
ABSTRACT
Soybean is a pivotal protein and oil crop that utilizes atmospheric nitrogen via symbiosis with rhizobium soil bacteria. Rhizobial type III effectors (T3Es) are essential regulators during symbiosis establishment. However, how the transcription factors involved in the interaction between phytohormone synthesis and type III effectors are connected is unclear. To detect the responses of phytohormone and transcription factor genes to rhizobial type III effector NopAA and type III secretion system, the candidate genes underlying soybean symbiosis were identified using RNA sequencing (RNA-seq) and phytohormone content analysis of soybean roots infected with wild-type Rhizobium and its derived T3E mutant. Via RNA-seq analysis the WRKY and ERF transcription factor families were identified as the most differentially expressed factors in the T3E mutant compared with the wild-type. Next, qRT-PCR was used to confirm the candidate genes Glyma.09g282900, Glyma.08g018300, Glyma.18g238200, Glyma.03g116300, Glyma.07g246600, Glyma.16g172400 induced by S. fredii HH103, S. fredii HH103ΩNopAA, and S. fredii HH103ΩRhcN. Since the WRKY and ERF families may regulate abscisic acid (ABA) content and underlying nodule formation, we performed phytohormone content analysis at 0.5 and 24 h post-inoculation (hpi). A significant change in ABA content was found between wild Rhizobium and type III effector mutant. Our results support that NopAA can promote the establishment of symbiosis by affecting the ABA signaling pathways by regulating WRKY and ERF which regulate the phytohormone signaling pathway. Specifically, our work provides insights into a signaling interaction of prokaryotic effector-induced phytohormone response involved in host signaling that regulates the establishment of symbiosis and increases nitrogen utilization efficiency in soybean plants.
Subject(s)
Glycine max , Rhizobium , Glycine max/genetics , Plant Growth Regulators/metabolism , Transcription Factors/metabolism , Symbiosis/physiology , Plant Roots/microbiologyABSTRACT
Industrial emissions of volatile organic compounds are urgently addressed for their toxicity and carcinogenicity to humans. Developing efficient and eco-friendly reforming technology of volatile organic compounds is important but still a great challenge. A promising strategy is to generate hydrogen-rich gas for solid oxide fuel cells by autothermal reforming of VOCs. In this study, we found a more desirable commercial catalyst (NiO/K2O-γ-Al2O3) for the autothermal reforming of VOCs. The performance of autothermal reforming of toluene as a model compound over a NiO/K2O-γ-Al2O3 catalyst fitted well with the simulation results at the optimum operating conditions calculated based on a simulation using Aspen PlusV11.0 software. Furthermore, the axial temperature distribution of the catalyst bed was monitored during the reaction, which demonstrated that the reaction system was self-sustaining. Eventually, actual volatile organic compounds from the chemical factory (C9, C10, toluene, paraxylene, diesel, benzene, kerosene, raffinate oil) were completely reformed over NiO/K2O-γ-Al2O3. Reducing emissions of VOCs and generating hydrogen-rich gas as a fuel from the autothermal reforming of VOCs is a promising strategy.
ABSTRACT
The performance evaluation and optimization of an energy conversion system design of an energy intensive drying system applied the method of combining exergy and economy is a theme of global concern. In this study, a gas-type industrial drying system of black tea with a capacity of 100 kg/h is used to investigate the exergetic and economic performance through the exergy and exergoeconomic methodology. The result shows that the drying rate of tea varies from the maximum value of 3.48 gwater/gdry matter h to the minimum 0.18 gwater/gdry matter h. The highest exergy destruction rate is found for the drying chamber (74.92 kW), followed by the combustion chamber (20.42 kW) in the initial drying system, and 51.83 kW and 21.15 kW in the redrying system. Similarly, the highest cost of the exergy destruction rate is found for the drying chamber (18.497 USD/h), followed by the combustion chamber (5.041 USD/h) in the initial drying system, and 12.796 USD/h and 5.222 USD/h in the redrying system. Furthermore, we analyzed the unit exergy rate consumed and the unit exergy cost of water removal in different drying sections of the drying system, and determined the optimal ordering of each component. These results mentioned above indicate that, whether from an energy or economic perspective, the component improvements should prioritize the drying chamber. Accordingly, minimizing exergy destruction and the cost of the exergy destruction rate can be considered as a strategy for improving the performance of energy and economy. Overall, the main results provide a more intuitive judgment for system improvement and optimization, and the exergy and exergoeconomic methodology can be commended as a method for agricultural product industrial drying from the perspective of exergoeconomics.
ABSTRACT
The development of novel non-noble electrocatalysts is critical for an efficient electrochemical hydrogen evolution reaction (HER). In this study, high-density nickel-cobalt alloy nanoparticles embedded in the bent nitrogen-doped carbon nanosheets are prepared as a high-performance catalyst. The optimized Ni7Co3/NC-500 catalyst displays quite a low overpotential of 90 mV at a current density of 10 mA cm-2, and a small Tafel slope of 64 mV dec-1 in alkaline medium, and even performs better than commercial 20% Pt/C at a high current density (η150 = 233 mV for Ni7Co3/NC-500 and η150 = 267 mV for 20% Pt/C). Specifically, the high-density nickel-cobalt alloy (with an average size of 6.2 nm and a distance of <3.0 nm) embedded in the bent carbon nanosheets provides plentiful active sites. Furthermore, in situ visualization of the produced hydrogen bubbles shows that the small size of hydrogen bubbles (d = 0.2 mm for Ni7Co3/NC-500 vs. d = 0.8 mm for 20% Pt/C) resulting from the small water contact angle and the bent nanosheet structure would inhibit the aggregation of H2 bubbles on the surface to facilitate efficient mass diffusion. Density functional theory calculations reveal that the formation of the nickel-cobalt alloy can effectively lower water dissociation energy barriers and optimize hydrogen adsorption Gibbs free energy, manifesting a high HER activity.
ABSTRACT
Articular cartilage focal lesion remains an intractable challenge in sports medicine, and autologous chondrocytes' implantation (ACI) is one of the most commonly utilized treatment modality for this ailment. However, the current ACI technique requires two surgical steps which increases patients' morbidity and incurs additional medical costs. In the present study, we developed a one-step cryopreserved off-the-shelf ACI tissue-engineered (TE) cartilage by seeding pellets of spheroidal cartilage stem/progenitor cells (CSPCs) on a silk scaffold. The pellets were developed through a hanging-drop method, and the incubation time of 1 day could efficiently produce spheroidal pellets without any adverse influence on the cell activity. The pellet size was also optimized. Under chondrogenic induction, pellets consisting of 40â¯000 CSPCs were found to exhibit the most abundant cartilage matrix deposition and the highest mRNA expression levels of SOX9, aggrecan, and COL2A1, as compared with pellets consisting of 10â¯000, 100â¯000, or 200â¯000 CSPCs. Scaffolds seeded with CSPCs pellets containing 40â¯000 cells could be preserved in liquid nitrogen with the viability, migration, and chondrogenic ability remaining unaffected for as long as 3 months. When implanted in a rat trochlear cartilage defect model for 3 months, the ready-to-use, cryopreserved TE cartilage yielded fully cartilage reconstruction, which was comparable with the uncryopreserved control. Hence, our study provided preliminary data that our off-the-shell TE cartilage with optimally sized CSPCs pellets seeded within silk scaffolds exhibited strong cartilage repair capacity, which provided a convenient and promising one-step surgical approach to ACI.
Subject(s)
Cartilage, Articular , Chondrocytes , Cartilage, Articular/surgery , Chondrogenesis , Humans , Stem Cells , Tissue EngineeringABSTRACT
BACKGROUND: Infiltrating immune and stromal cells are vital components of the bladder cancer (BC) microenvironment, which can significantly affect BC progression and outcome. However, the contribution of each subset of tumour-infiltrating immune cells is unclear. The objective of this study was to perform cell phenotyping and transcriptional profiling of the tumour immune microenvironment and analyse the association of distinct cell subsets and genes with BC prognosis. METHODS: Clinical data of 412 patients with BC and 433 transcription files for normal and cancer tissues were downloaded from The Cancer Genome Atlas. The CIBERSORT algorithm was used to determine the relative abundance of 22 immune cell types in each sample and the ESTIMATE algorithm was used to identify differentially expressed genes within the tumour microenvironment of BC, which were subjected to functional enrichment and protein-protein interaction (PPI) analyses. The association of cell subsets and differentially expressed genes with patient survival and clinical parameters was examined by Cox regression analysis and the Kaplan-Meier method. RESULTS: Resting natural killer cells and activated memory CD4+ and CD8+ T cells were associated with favourable patient outcome, whereas resting memory CD4+ T cells were associated with poor outcome. Differential expression analysis revealed 1334 genes influencing both immune and stromal cell scores; of them, 97 were predictive of overall survival in patients with BC. Among the top 10 statistically significant hub genes in the PPI network, CXCL12, FN1, LCK, and CXCR4 were found to be associated with BC prognosis. CONCLUSION: Tumour-infiltrating immune cells and cancer microenvironment-related genes can affect the outcomes of patients and are likely to be important determinants of both prognosis and response to immunotherapy in BC.
Subject(s)
CD4-Positive T-Lymphocytes/immunology , CD8-Positive T-Lymphocytes/immunology , Lymphocytes, Tumor-Infiltrating/immunology , Urinary Bladder Neoplasms/metabolism , Algorithms , Chemokine CXCL12/genetics , Chemokine CXCL12/metabolism , Fibronectins/genetics , Fibronectins/metabolism , Gene Expression Profiling , Gene Expression Regulation, Neoplastic , Gene Regulatory Networks , Humans , Lymphocyte Specific Protein Tyrosine Kinase p56(lck)/genetics , Lymphocyte Specific Protein Tyrosine Kinase p56(lck)/metabolism , Prognosis , Receptors, CXCR4/genetics , Receptors, CXCR4/metabolism , Single-Cell Analysis , Survival Analysis , Tumor Microenvironment , Urinary Bladder Neoplasms/mortality , Urinary Bladder Neoplasms/pathologySubject(s)
Hip Dislocation, Congenital/surgery , Osteotomy/methods , Walking , Child, Preschool , Female , Follow-Up Studies , Humans , Infant , Male , Prospective Studies , Treatment OutcomeABSTRACT
BACKGROUND The study aimed to develop a novel orthopedic surgical scaffold made of collagen and silk to repair the tendon and bone interface, and to investigate its influence on tendon and bone healing in a rabbit model. MATERIAL AND METHODS Four types of surgical scaffold were prepared, including a random collagen scaffold (RCS), an aligned collagen scaffold (ACS), a random collagen scaffold combined with knitted silk (RCSS), and an aligned collagen scaffold combined with knitted silk (ACSS). Rabbit bone marrow stem cells (BMSCs) were cultured and seeded onto the RCS and ACS scaffold. The animal model included four-month-old female New Zealand White rabbits (N=20) that underwent drilling into the rotator cuff of the left supraspinatus muscle tendon, randomized into the ACSS and RCSS groups. RESULTS Rabbit BMSCs adhered to and proliferated on the RCS and ACS in vitro. Transcription levels of the COL I, COL III, and tenascin (TCN) genes were significantly increased in the ACS group compared with the RCS group. Transcription levels of COL I, runt-related transcription factor-2 (RUNX-2) and bone morphogenetic protein-2 (BMP-2) were significantly increased in the RCS group compared with the ACS group. RCSS and ACSS implanted in the rabbit models for eight weeks resulted in more regenerative tissue in the RCSS group compared with the ACSS group, with new cartilage at the tendon and bone interface at 12 weeks. CONCLUSIONS A collagen and silk scaffold improved healing of the tendon and bone interface in a rabbit model.
Subject(s)
Orthopedic Procedures/methods , Tissue Scaffolds/chemistry , Wound Healing/physiology , Animals , Bone Marrow Cells/metabolism , Bone Morphogenetic Protein 2/genetics , Bone and Bones/surgery , Collagen/chemistry , Collagen/therapeutic use , Core Binding Factor Alpha 1 Subunit/genetics , Disease Models, Animal , Female , Rabbits , Rotator Cuff/surgery , Silk/chemistry , Silk/therapeutic use , Stem Cells/metabolism , Tenascin/genetics , Tendons/surgeryABSTRACT
Tissue engineering is a promising solution for meniscal regeneration after meniscectomy. However, in situ reconstruction still poses a formidable challenge due to multifunctional roles of the meniscus in the knee. In this study, we fabricate a silk sponge from 9% (w/v) silk fibroin solution through freeze drying and then coat its internal space and external surface with collagen sponge. Subsequently, various characteristics of the silk-collagen scaffold are evaluated, and cytocompatibility of the construct is assessed in vitro and subcutaneously. The efficacy of this composite scaffold for meniscal regeneration is evaluated through meniscus reconstruction in a rabbit meniscectomy model. It is found that the internally coated collagen sponge enhances the cytocompatibility of the silk sponge, and the external layer of collagen sponge significantly improves the initial frictional property. Additionally, the silk-collagen composite group shows more tissue ingrowth and less cartilage wear than the pure silk sponge group at 3 months postimplantation in situ. These findings thus demonstrate that the composite scaffold had less damage to the joint surface than the silk alone through promoting functional meniscal regeneration after meniscectomy, which indicates its clinical potential in meniscus reconstruction.
Subject(s)
Coated Materials, Biocompatible/chemistry , Collagen/chemistry , Meniscus/physiology , Regeneration , Silk/chemistry , Tissue Scaffolds/chemistry , Animals , Meniscus/injuries , Meniscus/pathology , RabbitsABSTRACT
Current surgical management of anterior cruciate ligament (ACL) rupture still remains an intractable challenge in ACL regeneration due to the weak self-healing capability of ACL. Inadequate cell numbers and vascularization within the articular cavity contribute mainly to the poor prognosis. This time, we fabricated a new tissue engineering scaffold by adding ligament stem/progenitor cell (LSPC) sheets to our previous knitted silk-collagen sponge scaffold, which overcame these limitations by providing sufficient numbers of seed cells and a natural extracellular matrix to facilitate regeneration. LSPCs display excellent proliferation and multilineage differentiation capacity. Upon ectopic implantation, the knitted silk-collagen sponge scaffold incorporated with an LSPC sheet exhibited less immune cells but more fibroblast-like cells, deposited ECM and neovascularization, and better tissue ingrowth. In a rabbit model, we excised the ACL and performed a reconstructive surgery with our scaffold. Increased expression of ligament-specific genes and better collagen fibril formation could be observed after orthotopic transplantation. After 6 months, the LSPC sheet group showed better results on ligament regeneration and ligament-bone healing. Furthermore, no obvious cartilage and meniscus degeneration were observed at 6 months postoperation. In conclusion, these results indicated that the new tissue engineering scaffold can promote ACL regeneration and slow down the progression of osteoarthritis, thus suggesting its high clinical potential as an ideal graft in ACL reconstruction.
ABSTRACT
Anterior cruciate ligament (ACL) is one of the most difficult tissues to heal once injured. Ligament regeneration and tendon-bone junction healing are two major goals of ACL reconstruction. This study aimed to investigate the synergistic therapeutic effects of Stromal cell-derived factor 1 (SDF-1)-releasing collagen-silk (CSF) scaffold combined with intra-articular injection of ligament-derived stem/progenitor cells (LSPCs) for ACL regeneration and the amelioration in the long-term complication of osteoarthritis (OA). The stem cell recruitment ability of CSF scaffold and the multipotency, particularly the tendon forming ability of LSPCs from rabbits were characterized in vitro, while the synergistic effect of the CSF scaffold and LSPCs for ACL regeneration and OA amelioration were investigated in vivo at 1, 3, and 6â¯months with a rabbit ACL reconstruction model. The CSF scaffold was used as a substitute for the ACL, and LSPCs were injected into the joint cavity after 7â¯days of the ACL reconstruction. CSF scaffold displayed a controlled release pattern for the encapsulated protein for up to 7â¯days with an increased stiffness in the mechanical property. LSPCs, which exhibited highly I Collagen and CXCR4 expression, were attracted by SDF-1 and successfully relocated into the CSF scaffold at 1â¯month in vivo. At 3 and 6â¯months post-treatment, the CSF scaffold combined with LSPCs (CSFL group) enhanced the regeneration of ACL tissue, and promoted bone tunnel healing. Furthermore, the OA progression was impeded efficiently. Our findings here provided a new strategy that using stem cell recruiting CSF scaffold with tissue-specific stem cells, could be a promising solution for ACL regeneration. STATEMENT OF SIGNIFICANCE: In this study, we developed a silk scaffold with increased stiffness and SDF-1 controlled release capacity for ligament repair. This advanced scaffold transplantation combined with intra-articular injection of LSPCs (which was isolated from rabbit ligament for the first time in this study) promoted the regeneration of both the tendinous and bone tunnel portion of ACL. This therapeutic strategy also ameliorated cartilage degeneration and reduced the severity of arthrofibrosis. Hence, combining LSPCs injection with SDF-1-releasing silk scaffold is demonstrated as a therapeutic strategy for ACL regeneration and OA treatment in the clinic.
Subject(s)
Anterior Cruciate Ligament/metabolism , Bone Regeneration/drug effects , Chemokine CXCL12/pharmacology , Fibroins , Osteoarthritis, Knee/therapy , Stem Cell Transplantation , Tissue Scaffolds/chemistry , Animals , Anterior Cruciate Ligament/pathology , Disease Models, Animal , Fibroins/chemistry , Fibroins/pharmacology , Osteoarthritis, Knee/metabolism , Osteoarthritis, Knee/pathology , RabbitsABSTRACT
BACKGROUND: Chronic tendinopathy is a commonly occurring clinical problem that affects both athletes and inactive middle-aged patients. Although some studies have shown that different platelet-rich plasma (PRP) preparations could exert various therapeutic effects in vitro, the role of leukocytes in PRP has not yet been defined under tendinopathy conditions in vivo. PURPOSE: This study compared the effects of the intratendon delivery of leukocyte-poor PRP (Lp-PRP) versus leukocyte-rich PRP (Lr-PRP) in a rabbit chronic tendinopathy model in vivo. STUDY DESIGN: Controlled laboratory study. METHODS: Four weeks after a local injection of collagenase in the Achilles tendon, the following treatments were randomly administered on the lesions: injections of (1) 200 µL of Lp-PRP (n = 8), (2) 200 µL of Lr-PRP (n = 8), or (3) 200 µL of saline (n = 8). Healing outcomes were assessed at 4 weeks after therapy with magnetic resonance imaging (MRI), cytokine quantification, real-time polymerase chain reaction analysis of gene expression, histology, and transmission electron microscopy (TEM). RESULTS: MRI revealed that the Lr-PRP and saline groups displayed higher signal intensities compared with the Lp-PRP group with T2 mapping. Histologically, the Lp-PRP group displayed significantly better general scores compared with the Lr-PRP ( P = .001) and saline ( P < .001) groups. Additionally, TEM showed that the Lp-PRP group had larger collagen fibril diameters than the Lr-PRP group ( P < .001). Enzyme-linked immunosorbent assay showed a significantly lower level of catabolic cytokine IL-6 in the Lp-PRP group compared with the Lr-PRP ( P = .001) and saline ( P = .021) groups. The Lp-PRP group displayed significantly increased expression of collagen I compared with the saline group ( P = .004) but not the Lr-PRP group. Both the Lp-PRP and Lr-PRP groups exhibited significantly lower matrix metalloproteinase (MMP)-1 and MMP-3 expression levels compared with the saline group. However, only the Lp-PRP group displayed significantly higher expression of TIMP-1 than the saline group ( P = .024). CONCLUSION: Compared with Lr-PRP, Lp-PRP improves tendon healing and is a preferable option for the clinical treatment of tendinopathy. CLINICAL RELEVANCE: PRP is widely used in the clinical management of chronic tendinopathy. However, the clinical results are ambiguous. It is imperative to understand the influence of leukocytes on PRP-mediated tissue healing in vivo, which could facilitate the better clinical management of chronic tendinopathy. Further studies are needed to translate our findings to the clinical setting.
Subject(s)
Achilles Tendon/injuries , Platelet-Rich Plasma/metabolism , Tendinopathy/therapy , Wound Healing , Animals , Collagenases/administration & dosage , Enzyme-Linked Immunosorbent Assay , Leukocytes/metabolism , RabbitsABSTRACT
Anterior cruciate ligament (ACL) reconstruction remains a formidable clinical challenge because of the lack of vascularization and adequate cell numbers in the joint cavity. In this study, we developed a novel strategy to mimic the early stage of repair in vivo, which recapitulated extra-articular inflammatory response to facilitate the early ingrowth of blood vessels and cells. A vascularized ectopic tissue engineered ligament (ETEL) with silk collagen scaffold was developed and then transferred to reconstruct the ACL in rabbits without interruption of perfusion. At 2weeks after ACL reconstruction, more well-perfused cells and vessels were found in the regenerated ACL with ETEL, which decreased dramatically at the 4 and 12week time points with collagen deposition and maturation. ACL treated with ETEL exhibited more mature ligament structure and enhanced ligament-bone healing post-reconstructive surgery at 4 and 12weeks, as compared with the control group. In addition, the ETEL group was demonstrated to have higher modulus and stiffness than the control group significantly at 12weeks post-reconstructive surgery. In conclusion, our results demonstrated that the ETEL can provide sufficient vascularity and cellularity during the early stages of healing, and subsequently promote ACL regeneration and ligament-bone healing, suggesting its clinic use as a promising therapeutic modality. STATEMENT OF SIGNIFICANCE: Early inflammatory cell infiltration, tissue and vessels ingrowth were significantly higher in the extra-articular implanted scaffolds than theses in the joint cavity. By mimicking the early stages of wound repair, which provided extra-articular inflammatory stimulation to facilitate the early ingrowth of blood vessels and cells, a vascularized ectopic tissue engineered ligament (ETEL) with silk collagen scaffold was constructed by subcutaneous implantation for 2weeks. The fully vascularized TE ligament was then transferred to rebuild ACL without blood perfusion interruption, and was demonstrated to exhibit improved ACL regeneration, bone tunnel healing and mechanical properties.
Subject(s)
Anterior Cruciate Ligament Injuries/therapy , Anterior Cruciate Ligament Reconstruction/instrumentation , Anterior Cruciate Ligament/transplantation , Bioartificial Organs , Collagen/chemistry , Silk/chemistry , Tissue Scaffolds , Animals , Anterior Cruciate Ligament/cytology , Anterior Cruciate Ligament/growth & development , Anterior Cruciate Ligament Injuries/pathology , Anterior Cruciate Ligament Injuries/physiopathology , Anterior Cruciate Ligament Reconstruction/methods , Equipment Design , Equipment Failure Analysis , Pilot Projects , Rabbits , Regeneration/physiology , Tissue Engineering/instrumentation , Tissue Engineering/methods , Treatment OutcomeABSTRACT
Rotator cuff tear is one of the most common types of shoulder injuries, often resulting in pain and physical debilitation. Allogeneic tendon-derived decellularized matrices do not have appropriate pore size and porosity to facilitate cell infiltration, while commercially-available synthetic scaffolds are often inadequate at inducing tenogenic differentiation. The aim of this study is to develop an advanced 3D aligned collagen/silk scaffold (ACS) and investigate its efficacy in a rabbit massive rotator cuff tear model. ACS has similar 3D alignment of collagen fibers as natural tendon with superior mechanical characteristics. Based on ectopic transplantation studies, the optimal collagen concentration (10mg/ml), pore diameter (108.43±7.25µm) and porosity (97.94±0.08%) required for sustaining a stable macro-structure conducive for cellular infiltration was determined. Within in vitro culture, tendon stem/progenitor cells (TSPCs) displayed spindle-shaped morphology, and were well-aligned on ACS as early as 24h. TSPCs formed intercellular contacts and deposited extracellular matrix after 7days. With the in vivo rotator cuff repair model, the regenerative tendon of the ACS group displayed more conspicuous native microstructures with larger diameter collagen fibrils (48.72±3.75 vs. 44.26±5.03nm) that had better alignment and mechanical properties (139.85±49.36vs. 99.09±33.98N) at 12weeks post-implantation. In conclusion, these findings demonstrate the positive efficacy of the macroporous 3D aligned scaffold in facilitating rotator cuff tendon regeneration, and its practical applications for rotator cuff tendon tissue engineering. STATEMENT OF SIGNIFICANCE: Massive rotator cuff tear is one of the most common shoulder injuries, and poses a formidable clinical challenge to the orthopedic surgeon. Tissue engineering of tendon can potentially overcome the problem. However, more efficacious scaffolds with good biocompatibility, appropriate pore size, favorable inductivity and sufficient mechanical strength for repairing massive rotator cuff tendon injuries need to be developed. In this study, we developed a novel macroporous 3D aligned collagen/silk scaffold, and demonstrated that this novel scaffold enhanced the efficacy of rotator cuff tendon regeneration by inducing aligned supracellular structures similar to natural tendon, which in turn enhanced cellular infiltration and tenogenic differentiation of stem/progenitor cells from both the tendon itself and surrounding tissues. Hence, it can potentially be a clinically useful application for tendon tissue engineering.
Subject(s)
Fibrillar Collagens/chemistry , Regeneration , Rotator Cuff/pathology , Silk/chemistry , Tissue Scaffolds/chemistry , Animals , Biomechanical Phenomena , Bombyx , Cell Proliferation/drug effects , Disease Models, Animal , Female , Fibrillar Collagens/pharmacology , Gene Expression Regulation/drug effects , Implants, Experimental , Porosity , Rabbits , Real-Time Polymerase Chain Reaction , Regeneration/drug effects , Rotator Cuff/drug effects , Rotator Cuff/ultrastructure , Silk/pharmacology , Sus scrofaABSTRACT
OBJECTIVE: To investigate the effects of three-dimensional parallel collagen scaffold on the cell shape, arrangement and extracellular matrix formation of tendon stem cells. METHODS: Parallel collagen scaffold was fabricated by unidirectional freezing technique, while random collagen scaffold was fabricated by freeze-drying technique. The effects of two scaffolds on cell shape and extracellular matrix formation were investigated in vitro by seeding tendon stem/progenitor cells and in vivo by ectopic implantation. RESULTS: Parallel and random collagen scaffolds were produced successfully. Parallel collagen scaffold was more akin to tendon than random collagen scaffold. Tendon stem/progenitor cells were spindle-shaped and unified orientated in parallel collagen scaffold, while cells on random collagen scaffold had disorder orientation. Two weeks after ectopic implantation, cells had nearly the same orientation with the collagen substance. In parallel collagen scaffold, cells had parallel arrangement, and more spindly cells were observed. By contrast, cells in random collagen scaffold were disorder. CONCLUSION: Parallel collagen scaffold can induce cells to be in spindly and parallel arrangement, and promote parallel extracellular matrix formation; while random collagen scaffold can induce cells in random arrangement. The results indicate that parallel collagen scaffold is an ideal structure to promote tendon repairing.
Subject(s)
Collagen/chemistry , Extracellular Matrix/physiology , Stem Cells/cytology , Tendons/growth & development , Tissue Engineering , Tissue Scaffolds/chemistry , Freeze Drying , Freezing , Humans , Tendons/cytologyABSTRACT
Platelet-enriched plasma (PRP) contains high concentration of platelets and abundant growth factors, which is made by centrifuging of blood and separating of blood elements. PRP promotes tendon repair by releasing various cytokines to enhance cell proliferation, tenogenic differentiation, formation and secretion of matrix; meantime, it can reduce pain by inhibiting the expression of pain-associated molecules. A number of clinical studies demonstrated that PRP was effective in treatment of tendinopathy, including patellar tendinopathy, lateral epicondylitis and plantar fasciopathy. However, some studies did not support this conclusion, because of disparity of PRP types, therapeutic courses and injections protocols in clinical application. Based on its safety, PRP can be a choice of treatment for tendinopathy, in case other non-surgical therapies are of no effect.
Subject(s)
Platelet-Rich Plasma , Tendinopathy/therapy , Blood Platelets/cytology , Cytokines/metabolism , Humans , Intercellular Signaling Peptides and Proteins/metabolismABSTRACT
The repair of injured tendons remains a formidable clinical challenge because of our limited understanding of tendon stem cells and the regulation of tenogenesis. With single-cell analysis to characterize the gene expression profiles of individual cells isolated from tendon tissue, a subpopulation of nestin+ tendon stem/progenitor cells (TSPCs) was identified within the tendon cell population. Using Gene Expression Omnibus datasets and immunofluorescence assays, we found that nestin expression was activated at specific stages of tendon development. Moreover, isolated nestin+ TSPCs exhibited superior tenogenic capacity compared to nestin- TSPCs. Knockdown of nestin expression in TSPCs suppressed their clonogenic capacity and reduced their tenogenic potential significantly both in vitro and in vivo. Hence, these findings provide new insights into the identification of subpopulations of TSPCs and illustrate the crucial roles of nestin in TSPC fate decisions and phenotype maintenance, which may assist in future therapeutic strategies to treat tendon disease.
Subject(s)
Databases, Nucleic Acid , Gene Expression Regulation/physiology , Nestin/metabolism , Stem Cells/metabolism , Tendons/metabolism , Animals , Mice , Mice, Transgenic , Nestin/genetics , Stem Cells/cytology , Tendons/cytologyABSTRACT
BACKGROUND: Lumbar disc removal is currently the standard treatment for lumbar disc herniation. No consensus has been achieved whether aggressive disc resection with curettage (discectomy) versus conservative removal of the offending disc fragment alone (sequestrectomy) provides better outcomes. This study aims to compare the reherniation rate and clinical outcomes between discectomy and sequestrectomy by literature review and a meta-analysis. METHODS: A systematic search of PubMed, Medline, Embase and the Cochrane Library was performed up to June 1, 2014. Outcomes of interest assessing the two techniques included demographic and clinical baseline characteristics, perioperative variables, complications, recurrent herniation rate and post-operative functional outcomes. RESULTS: Twelve eligible trials evaluating discectomy vs sequestrectomy were identified including one randomized controlled study, five prospective and six retrospective comparative studies. By contrast to discectomy, sequestrectomy was associated with significantly less operative time (p<0.001), lower visual analogue scale (VAS) for low back pain (p<0.05), less post-operative analgesic usage (p<0.05) and better patients' satisfaction (p<0.05). Recurrent herniation rate, reoperation rate, intraoperative blood loss, hospitalization duration and VAS for sciatica were without significant difference. CONCLUSIONS: According to our pooled data, sequestrectomy entails equivalent reherniation rate and complications compared with discectomy but maintains a lower incidence of recurrent low back pain and higher satisfactory rate. High-quality prospective randomized controlled trials are needed to firmly assess these two procedures.