ABSTRACT
Near-infrared (NIR) light, compared with ultraviolet (UV) light, has a stronger tissue penetration ability and is widely used in the medical field. However, few hydrogels can be triggered by NIR. Here, a modular polymer-nanosheet (metal disulfide) (PNS) hydrogel system was proposed, which can be photo-crosslinked through photothermal conversion under NIR light. MoS2, a transition-metal dichalcogenide, was used as a crosslink center in PNS hydrogels. Mo and S (from thiolated polymers), which are essential for gelation, were discovered to have new bonds. Furthermore, 3D printing of NIR-triggered PNS hydrogels was achieved conceptually with masked NIR. Moreover, multiple hydrogels and metal disulfides were applicable in this modular gelation system. This study indicated that these PNS hydrogels have great potential in many smart biomedical applications, including wearable sensors, noninvasive in vivo 3D bioprinting, and tissue repair substitutes.
Subject(s)
Disulfides , Hydrogels , Infrared Rays , Molybdenum , Printing, Three-Dimensional , Hydrogels/chemistry , Molybdenum/chemistry , Disulfides/chemistry , Biocompatible Materials/chemistry , Biocompatible Materials/pharmacology , Animals , Humans , Mice , Tissue Engineering , Cross-Linking Reagents/chemistry , Particle SizeABSTRACT
Osteoblasts and osteoclasts are two of the most important types of cells in bone repair, and their bone-forming and bone-resorbing activities influence the process of bone repair. In this study, we proposed a physicochemical bidirectional regulation strategy via ration by physically utilizing hydroxyapatite nanopatterning to recruit and induce MSCs osteogenic differentiation and by chemically inhibiting osteolysis activity through the loaded zoledronate. The nanorod-like hydroxyapatite coating was fabricated via a modified hydrothermal process while the zoledronic acid was loaded through the chelation within the calcium ions. The fabrication of a hydroxyapatite/zoledronic acid composite biomaterial. This biomaterial promotes bone tissue regeneration by physically utilizing hydroxyapatite nanopatterning to recruit and induce MSCs osteogenic differentiation and by chemically inhibiting osteolysis activity through the loaded zoledronate. The nanorod-like hydroxyapatite coating was fabricated via a modified hydrothermal process while the zoledronic acid was loaded through the chelation within the calcium ions. The in vitro results tested on MSCs and RAW 246.7 indicated that the hydroxyapatite enhanced cells' physical sensing system, therefore enhancing the osteogenesis. At the same time the zoledronic acid inhibited osteolysis by downregulating the RANK-related genes. This research provides a promising strategy for enhancing bone regeneration and contributes to the field of orthopedic implants.
Subject(s)
Bone Regeneration , Calcium Phosphates , Mesenchymal Stem Cells , Osteogenesis , Printing, Three-Dimensional , Zoledronic Acid , Bone Regeneration/drug effects , Animals , Osteogenesis/drug effects , Mice , Calcium Phosphates/chemistry , Calcium Phosphates/pharmacology , Mesenchymal Stem Cells/drug effects , Mesenchymal Stem Cells/cytology , Zoledronic Acid/pharmacology , Zoledronic Acid/chemistry , Osteolysis/drug therapy , Durapatite/chemistry , Durapatite/pharmacology , Cell Differentiation/drug effects , RAW 264.7 CellsABSTRACT
Numerous studies have shown that there are multiple neural activities involved in the process of bone resorption and bone regeneration, and promoting osteogenesis by promoting neural network reconstruction is an effective strategy for repairing critical size bone defects. However, traumatic bone defects often cause activation of the sympathetic nervous system (SNS) in the damaged area, releasing excess catecholamines (CAs), resulting in a decrease in the rate of bone formation. Herein, a 3D-printed scaffold loaded with propranolol (PRN) is proposed to reduce CA concentrations in bone defect areas and promote bone regeneration through drug release. For this purpose, PRN-loaded methacrylated gelatin (GelMA) microspheres were mixed with low-concentration GelMA and perfused into a 3D-printed porous hydroxyapatite (HAp) scaffold. By releasing PRN, which can block ß-adrenergic receptors, it hinders the activation of sympathetic nerves and inhibits the release of excess CA by the SNS. At the same time, the composite scaffold recruits bone marrow mesenchymal stem cells (BMSCs) and promotes the differentiation of BMSCs in the direction of osteoblasts, which effectively promotes bone regeneration in the rabbit femoral condyle defect model. The results of the study showed that the release of PRN from the composite scaffold could effectively hinder the activation of sympathetic nerves and promote bone regeneration, providing a new strategy for the treatment of bone defects.
Subject(s)
Bone Regeneration , Mesenchymal Stem Cells , Printing, Three-Dimensional , Sympathetic Nervous System , Tissue Scaffolds , Bone Regeneration/drug effects , Animals , Rabbits , Sympathetic Nervous System/drug effects , Mesenchymal Stem Cells/drug effects , Tissue Scaffolds/chemistry , Propranolol/pharmacology , Propranolol/chemistry , Biocompatible Materials/chemistry , Biocompatible Materials/pharmacology , Gelatin/chemistry , Osteogenesis/drug effects , Durapatite/chemistry , Durapatite/pharmacologyABSTRACT
Cancer stem cells (CSCs) are essential for tumor initiation, recurrence, metastasis, and resistance. However, targeting CSCs as a therapeutic approach remains challenging. Here, a stemness signature based on 22-gene is developed to predict prognosis in esophageal squamous cell carcinoma (ESCC). Staurosporine (STS) is identified as a radioresistance suppressor by high-throughput screening of a library of 2131 natural compounds, leading to dramatically improved radiotherapy efficacy in subcutaneous tumor models. Mechanistically, STS inhibits cell proliferation through the mTOR/AKT signaling pathway and suppressed stemness by targeting ATP-binding cassette A1 (ABCA1), which is transcriptionally regulated by liver X receptor alpha (LXRα). STS can selectively bind to the nucleotide-binding domain (NBD) of ABCA1 and compete for ATP, blocking ABCA1-mediated drug efflux and facilitating intracellular accumulation of STS. Considering the cytotoxicity of STS, an extracellular vesicle-encapsulated STS system (EV-STS) is established for effective STS delivery. EV-STS shows remarkable tumor growth inhibition, even at half the dose of STS, with superior safety and efficacy. These findings indicate that ABCA1 may serve as a predictor of response to neoadjuvant chemotherapy and/or radiotherapy in ESCC patients. EV-STS has shown improved antitumor efficacy and low systemic toxicity, offering a promising therapeutic approach for ESCC.
Subject(s)
ATP Binding Cassette Transporter 1 , Extracellular Vesicles , Radiation Tolerance , Staurosporine , Humans , ATP Binding Cassette Transporter 1/metabolism , ATP Binding Cassette Transporter 1/genetics , Staurosporine/pharmacology , Staurosporine/analogs & derivatives , Animals , Extracellular Vesicles/metabolism , Radiation Tolerance/drug effects , Cell Line, Tumor , Mice , Cell Proliferation/drug effects , Neoplastic Stem Cells/drug effects , Neoplastic Stem Cells/metabolism , Esophageal Neoplasms/drug therapy , Esophageal Neoplasms/pathology , Esophageal Neoplasms/metabolism , Esophageal Neoplasms/therapy , Mice, Nude , Esophageal Squamous Cell Carcinoma/drug therapy , Esophageal Squamous Cell Carcinoma/pathology , Esophageal Squamous Cell Carcinoma/metabolism , Mice, Inbred BALB CABSTRACT
Severe bone defects resulting from trauma and diseases remain a persistent clinical challenge. In this study, a hierarchical biomimetic microporous hydrogel composite scaffold was constructed by mimicking the hierarchical structure of bone. Initially, gelatin methacrylamide (GelMA) and methacrylic anhydride silk fibroin (SilMA) were synthesized, and GelMA/SilMA inks with suitable rheological and mechanical properties were prepared. Biomimetic micropores were then generated by using an aqueous two-phase emulsification method. Subsequently, biomimetic microporous GelMA/SilMA was mixed with hydroxyapatite (HAp) to prepare biomimetic microporous GelMA/SilMA/HAp ink. Hierarchical biomimetic microporous GelMA/SilMA/HAp (M-GSH) scaffolds were then fabricated through digital light processing (DLP) 3D printing. Finally, in vitro experiments were conducted to investigate cell adhesion, proliferation, and inward migration as well as osteogenic differentiation and vascular regeneration effects. In vivo experiments indicated that the biomimetic microporous scaffold significantly promoted tissue integration and bone regeneration after 12 weeks of implantation, achieving 42.39% bone volume fraction regeneration. In summary, this hierarchical biomimetic microporous scaffold provides a promising strategy for the repair and treatment of bone defects.
Subject(s)
Acrylamides , Durapatite , Tissue Scaffolds , Durapatite/chemistry , Tissue Scaffolds/chemistry , Gelatin/chemistry , Osteogenesis , Biomimetics , Bone Regeneration , Printing, Three-Dimensional , Tissue EngineeringABSTRACT
The repair of mandibular defects is a challenging clinical problem, and associated infections often hinder the treatment, leading to failure in bone regeneration. Herein, a multifunctional platform is designed against the shortages of existing therapies for infected bone deficiency. 2D Ti3C2 MXene and berberine (BBR) are effectively loaded into 3D printing biphasic calcium phosphate (BCP) scaffolds. The prepared composite scaffolds take the feature of the excellent photothermal capacity of Ti3C2 as an antibacterial, mediating NIR-responsive BBR release under laser stimuli. Meanwhile, the sustained release of BBR enhances its antibacterial effect and further accelerates the bone healing process. Importantly, the integration of Ti3C2 improves the mechanical properties of the 3D scaffolds, which are beneficial for new bone formation. Their remarkable biomedical performances in vitro and in vivo present the outstanding antibacterial and osteogenic properties of the Ti3C2-BBR functionalized BCP scaffolds. The synergistic therapy makes it highly promising for repairing infected bone defects and provides insights into a wide range of applications of 2D nanosheets in biomedicine.
Subject(s)
Berberine , Hydroxyapatites , Nitrites , Tissue Scaffolds , Transition Elements , Berberine/pharmacology , Bone Regeneration , Anti-Bacterial Agents/pharmacology , Printing, Three-DimensionalABSTRACT
The commonly used titanium alloy dental implants currently apply solid structures. However, issues such as stress shielding and stress concentration may arise due to the significant difference in elastic modulus between the implant and host. In order to address these problems, this paper proposes five porous structures based on the Gibson-Ashby theoretical model. We utilized selective laser melting technology to shape a porous structure using Ti-6Al-4V material precisely. The mechanical properties of the porous structure were verified through simulation and compression experiments. The optimal porous structure, which best matched the human bone, was a circular ring structure with a pillar diameter of 0.6 mm and a layer height of 2 mm. The stress and strain of the porous implant on the surrounding cortical and cancellous bone under different biting conditions were studied to verify the effectiveness of the optimal circular ring porous structure in alleviating stress shielding in both standard and osteoporotic bone conditions. The results confirm that the circular ring porous structure meets implant requirements and provides a theoretical basis for clinical dental implantation.
ABSTRACT
Microtia is a congenital deformity of the ear with an incidence of about 0.8-4.2 per 10,000 births. Total auricular reconstruction is the preferred treatment of microtia at present, and one of the core technologies is the preparation of cartilage scaffolds. Autologous costal cartilage is recognized as the best material source for constructing scaffold platforms. However, costal cartilage harvest can lead to donor-site injuries such as pneumothorax, postoperative pain, chest wall scar and deformity. Therefore, with the need of alternative to autologous cartilage, in vitro and in vivo studies of biomaterial scaffolds and cartilage tissue engineering have gradually become novel research hot points in auricular reconstruction research. Tissue-engineered cartilage possesses obvious advantages including non-rejection, minimally invasive or non-invasive, the potential of large-scale production to ensure sufficient donors and controllable morphology. Exploration and advancements of tissue-engineered cartilaginous framework are also emerging in aspects including three-dimensional biomaterial scaffolds, acquisition of seed cells and chondrocytes, 3D printing techniques, inducing factors for chondrogenesis and so on, which has greatly promoted the research process of biomaterial substitute. This review discussed the development, current application and research progress of cartilage tissue engineering in auricular reconstruction, particularly the usage and creation of biomaterial scaffolds. The development and selection of various types of seed cells and inducing factors to stimulate chondrogenic differentiation in auricular cartilage were also highlighted. There are still confronted challenges before the clinical application becomes widely available for patients, and its long-term effect remains to be evaluated. We hope to provide guidance for future research directions of biomaterials as an alternative to autologous cartilage in ear reconstruction, and finally benefit the transformation and clinical application of cartilage tissue engineering and biomaterials in microtia treatment.
ABSTRACT
Purpose: Large bone defects caused by congenital defects, infections, degenerative diseases, trauma, and tumors often require personalized shapes and rapid reconstruction of the bone tissue. Three-dimensional (3D)-printed bone tissue engineering scaffolds exhibit promising application potential. Fused deposition modeling (FDM) technology can flexibly select and prepare printed biomaterials and design and fabricate bionic microstructures to promote personalized large bone defect repair. FDM-3D printing technology was used to prepare polylactic acid (PLA)/nano ß-tricalcium phosphate (TCP) composite bone tissue engineering scaffolds in this study. The ability of the bone-tissue-engineered scaffold to repair bone defects was evaluated in vivo and in vitro. Methods: PLA/nano-TCP composite bone tissue engineering scaffolds were prepared using FDM-3D printing technology. The characterization data of the scaffolds were obtained using relevant detection methods. The physical and chemical properties, biocompatibility, and in vitro osteogenic capacity of the scaffolds were investigated, and their bone repair capacity was evaluated using an in vivo animal model of rabbit femur bone defects. Results: The FDM-printed PLA/nano ß-TCP composite scaffolds exhibited good personalized porosity and shape, and their osteogenic ability, biocompatibility, and bone repair ability in vivo were superior to those of pure PLA. The merits of biodegradable PLA and bioactive nano ß-TCP ceramics were combined to improve the overall biological performance of the composites. Conclusion: The FDM-printed PLA/nano-ß-TCP composite scaffold with a ratio of 7:3 exhibited good personalized porosity and shape, as well as good osteogenic ability, biocompatibility, and bone repair ability. This study provides a promising strategy for treating large bone defects.
Subject(s)
Tissue Engineering , Tissue Scaffolds , Animals , Rabbits , Tissue Engineering/methods , Tissue Scaffolds/chemistry , Osteogenesis , Polyesters/chemistry , Bone and Bones , Printing, Three-DimensionalABSTRACT
Avascular necrosis of the femoral head is a prevalent hip joint disease. Due to the damage and destruction of the blood supply of the femoral head, the ischemic necrosis of bone cells and bone marrow leads to the structural changes and the collapse of the femoral head. In this study, an icariin-loaded 3D-printed porous Ti6Al4V reconstruction rod (referred to as reconstruction rod) was prepared by 3D printing technology. The mechanical validity of the reconstruction rod was verified by finite element analysis. Through infilling of mercapto hyaluronic acid hydrogel containing icariin into the porous structure, the loading of icariin was achieved. The biological efficacy of the reconstruction rod was confirmed through in vitro cell experiments, which demonstrated its ability to enhance MC3T3-E1 cell proliferation and facilitate cellular adhesion and spreading. The therapeutic efficacy of the reconstruction rod was validated in vivo through a femoral head necrosis model using animal experiments. The results demonstrated that the reconstruction rod facilitated osteogenesis and neovascularization, leading to effective osseointegration between bone and implant. This study provides innovative strategy for the treatment of early avascular necrosis of the femoral head. STATEMENT OF SIGNIFICANCE: The bioactivity of medical titanium alloy implants plays an important role in bone tissue engineering. This study proposed a medicine and device integrated designed porous Ti6Al4V reconstruction rod for avascular necrosis of the femoral head, whose macroscopic structure was customized by selective laser melting. The bionic porous structure of the reconstruction rod promoted the growth of bone tissue and formed an effective interface integration. Meanwhile, the loaded icariin promoted new bone and vascular regeneration, and increased the bone mass and bone density. Therefore, the implantation of reconstruction rod interfered with the further development of necrosis and provided a positive therapeutic effect. This study provides innovative strategies for the treatment of early avascular necrosis of femoral head.
Subject(s)
Femur Head Necrosis , Titanium , Animals , Porosity , Titanium/pharmacology , Titanium/chemistry , Femur Head Necrosis/drug therapy , Femur Head , Alloys/pharmacology , Printing, Three-DimensionalABSTRACT
Those who have used traditional biomaterials as bone substitutes have always regarded the immune response as an obstacle leading to implant failure. However, cumulative evidence revealed that blindly minimizing host immune reactions cannot induce successful bone regeneration. With the emergence of the new concept of osteoimmunology, the intimate mutual effects between the skeletal system and the immune system have been gradually recognized, promoting the innovation of biomaterials with osteoimmunomodulatory properties. By tuning the surface properties, biomaterials can precisely manipulate the osteoimmune environment favoring bone regeneration. In this review, we first reviewed the mutual effects between the skeletal system and the immune system to show the importance of immunomodulation on bone regeneration. Subsequently, we summarize the recent developments in surface modification strategies in terms of the surface physicochemical properties and surface coatings and explain how these modification strategies work.
Subject(s)
Bone Regeneration , Osteogenesis , Biocompatible Materials/pharmacology , Macrophages , Surface PropertiesABSTRACT
Digital light projection (DLP) printing of hydroxyapatite (HAp) bioceramic provides a promising strategy for fabrication of complex personalized bio-tooth root scaffold with high-resolution. However, it is still a challenge to fabricate bionic bio-tooth root with satisfied bioactivity and biomechanics. This research studied the HAp-based bioceramic scaffold with bionic bioactivity and biomechanics for personalized bio-root regeneration. Compared to natural decellularized dentine (NDD) scaffolds with unitary shape and restricted mechanical properties, those DLP printing bio-tooth roots with natural size, high precision appearance, excellent structure, and a smooth surface were successfully manufactured, which met various shape and structure requirements for personalized bio-tooth regeneration. Moreover, the bioceramic sintering at 1250 °C enhanced the physicochemical properties of HAp and exhibited good elastic modulus (11.72 ± 0.53 GPa), which was almost twice of early NDD (4.76 ± 0.75 GPa). To further improve the surface activity of sintered biomimetic, the nano-HAw (nano-hydroxyapatite whiskers) coating deposited by hydrothermal treatment increased the mechanical properties and surface hydrophilicity, which indicated positive effects on dental follicle stem cells (DFSCs)' proliferation and enhanced the DFSCs osteoblastic differentiation in vitro. Subcutaneous transplantation in nude mice and in-situ transplantation in rat alveolar fossa proved that the nano-HAw-containing scaffold could promote the DFSCs differentiate into periodontal ligament-like enthesis formation. In conclusion, by combining the optimized sintering temperature and modified nano-HAw interface through hydrothermal treatment, the DLP-printing of HAp-based bioceramic with favorable bioactivity and biomechanics is a promising candidate for personalized bio-root regeneration.
Subject(s)
Bionics , Tissue Scaffolds , Mice , Rats , Animals , Tissue Scaffolds/chemistry , Biomechanical Phenomena , Mice, Nude , Durapatite/pharmacology , Durapatite/chemistry , Printing, Three-Dimensional , RegenerationABSTRACT
Establishing a valid in vitro model to represent tumor heterogeneity and biology is critical but challenging. Tumor organoids are self-assembled three-dimensional cell clusters which are of great significance for recapitulating the histopathological, genetic, and phenotypic characteristics of primary tissues. The organoid has emerged as an attractive in vitro platform for tumor biology research and high-throughput drug screening in cancer medicine. Organoids offer unique advantages over cell lines and patient-derived xenograft models, but there are no standardized methods to guide the culture of organoids, leading to confusion in organoid studies that may affect accurate judgments of tumor biology. This review summarizes the shortcomings of current organoid culture methods, presents the latest research findings on organoid standardization, and proposes an outlook for organoid modeling.
Subject(s)
Neoplasms , Humans , Neoplasms/drug therapy , Neoplasms/genetics , Neoplasms/metabolism , Research , Organoids/metabolism , Organoids/pathologyABSTRACT
Phototherapy, which generally refers to photothermal therapy (PTT) and photodynamic therapy (PDT), has received significant attention over the past few years since it is non-invasive, has effective selectivity, and has few side effects. As a result, it has become a promising alternative to traditional clinical treatments. At present, two-dimensional materials (2D materials) have proven to be at the forefront of the development of advanced nanomaterials due to their ultrathin structures and fascinating optical properties. As a result, much work has been put into developing phototherapy platforms based on 2D materials. This review summarizes the current developments in 2D materials beyond graphene for phototherapy, focusing on the novel approaches of PTT and PDT. New methods are being developed to go above and beyond conventional treatment to fully use the potential of 2D materials. Additionally, the efficacy of cutting-edge phototherapy is assessed, and the existing difficulties and future prospects of 2D materials for phototherapy are covered.
ABSTRACT
Materials of different allogeneic or xenogeneic or autologous origins are widely used as soft-tissue fillers or structural scaffolds in the field of cosmetic surgery, while complications including prosthesis infection, donor site deformity and filler embolization have always been difficult problems for plastic surgeons. The application of novel biomaterials may bring in hopeful solutions for these problems. Recently, some advanced biomaterials, such as regenerative biomaterials can effectively promote the repair of defective tissues, which have been proven to have good therapeutic as well as cosmetic effects in cosmetic surgery. Therefore, biomaterials with active compounds have drawn significant attention for the tissue regeneration of reconstructive and esthetic treatment. Some of these applications have achieved better clinical outcomes than traditional biological materials. This review summarized recent progress and clinical applications of advanced biomaterials in cosmetic surgery.
ABSTRACT
The delayed healing of diabetic wounds is directly affected by the disturbance of wound microenvironment, resulting from persistent inflammation, insufficient angiogenesis, and impaired cell functions. Mesenchymal stem cell-derived extracellular vesicles (MSC-EVs) showed considerable therapeutic potential in diabetic wound healing. However, the low retention rate of MSC-EVs at wound sites hampers their efficacy. For skin wounds exposed to the outer environment, using a hydrogel with tissue adhesiveness under a moist wound condition is a promising strategy for wound healing. In this study, we modified methacryloyl-modified gelatin (GelMA) hydrogel with catechol motifs of dopamine to fabricate a GelMA-dopamine hydrogel. EVs isolated from MSCs were applied in the synthesized GelMA-dopamine hydrogel to prepare a GelMA-dopamine-EV hydrogel. The results demonstrated that the newly formed GelMA-dopamine hydrogel possessed improved properties of softness, adhesiveness, and absorptive capacity, as well as high biocompatibility in the working concentration (15% w/v). In addition, MSC-EVs were verified to promote cell migration and angiogenesis in vitro. In the skin wound model of diabetic rats, the GelMA-dopamine-EV hydrogel exerted prominent wound healing efficacy estimated by collagen deposition, skin appendage regeneration, and the expression of IL-6, CD31, and TGF-ß. In conclusion, this combination of MSC-EVs and the modified hydrogel not only accelerates wound closure but also promotes skin structure normalization by rescuing the homeostasis of the healing microenvironment of diabetic wounds, which provides a potential approach for the treatment of diabetic wounds.
Subject(s)
Diabetes Mellitus, Experimental , Extracellular Vesicles , Mesenchymal Stem Cells , Rats , Animals , Hydrogels/chemistry , Diabetes Mellitus, Experimental/drug therapy , Adhesives/pharmacology , Adhesives/therapeutic use , Dopamine/therapeutic use , Wound Healing/physiology , Gelatin/chemistryABSTRACT
Currently, various bioceramics have been widely used in bone regeneration. However, it remains a huge challenge to remote isolation bone regeneration, such as severed finger regeneration. The remote isolation bone tissue has a poor regenerative microenvironment that lacks enough blood and nutrition supply. It is very difficult to repair and regenerate. In this study, well-controlled multi-level porous 3D-printed calcium phosphate (CaP) bioceramic scaffolds with precision customized structures were fabricated by high-resolution digital light projection (DLP) printing technology for remote isolation bone regeneration. In vitro results demonstrated that optimizing material processing procedures could achieve multi-level control of 3D-printed CaP bioceramic scaffolds and enhance the osteoinduction ability of bioceramics effectively. In vivo results indicated that 3D-printed CaP bioceramic scaffolds constructed by optimized processing procedure exhibited a promising ability of bone regeneration and osteoinduction in ectopic osteogenesis and in situ caudal vertebrae regeneration in beagles. This study provided a promising strategy based on 3D-printed CaP bioceramic scaffolds constructed by optimized processing procedures for remote isolation bone regeneration, such as severed finger regeneration.
Subject(s)
Musculoskeletal Diseases , Tissue Scaffolds , Dogs , Animals , Tissue Scaffolds/chemistry , Porosity , Bone Regeneration , Bone and BonesABSTRACT
The tumorigenesis and progression of colorectal cancer are closely related to the tumor microenvironment, especially inflammatory response. Inhibitors of histone deacetylase (HDAC) have been reported as epigenetic regulators of the immune system to treat cancer and inflammatory diseases and our results demonstrated that Celastrol could act as a new HDAC inhibitor. Considering macrophages as important members of the tumor microenvironment, we further found that Celastrol could influence the polarization of macrophages to inhibit colorectal cancer cell growth. Specially, we used the supernatant of HCT116 and SW480 cells to induce Ana-1 cells in vitro and chose the spontaneous colorectal cancer model APCmin/+ mice as an animal model to validate in vivo. The results indicated that Celastrol could reverse the polarization of macrophages from M2 to M1 through impacting the colorectal tumor microenvironment both in vitro and in vivo. Furthermore, using bioinformatics analysis, we found that Celastrol might mechanistically polarize the macrophages through MAPK signaling pathway. In conclusion, our findings identified that Celastrol as a new HDAC inhibitor and suggested that Celastrol could modulate macrophage polarization, thus inhibiting colorectal cancer growth, which may provide some novel therapeutic strategies for colorectal cancer.
Subject(s)
Colorectal Neoplasms , Histone Deacetylase Inhibitors , Mice , Animals , Histone Deacetylase Inhibitors/pharmacology , Histone Deacetylase Inhibitors/metabolism , Macrophages/metabolism , Pentacyclic Triterpenes/metabolism , Colorectal Neoplasms/metabolism , Cell Transformation, Neoplastic/metabolism , Cell Polarity , Tumor MicroenvironmentABSTRACT
Coal ash (CA) is not only one of the most solid wastes from combustion, easily resulting in a series of concerns, but it is also an artificial deposit with considerable metals, such as iron and rare earth. The variation in the coal ash characteristics due to the origins, combustion process, and even storage environment has been hindering the metal utilization from coal ash. In this study, three ash sample from lab muffle, circulating fluidized bed (CFB), and pulverized coal (PC) furnace was derived for the discrepancy study from the combustion furnace, including properties, iron, and rare earth recovery. The origins of the coal feed samples have more of an effect on their properties than combustion furnaces. Magnetic separation is suitable for coal ash from PC because of the magnetite product, and the iron content is 58% in the Mag-1 fraction, with a yield of 3%. The particles in CA from CFB appear irregular and fragmental, while those from PC appear spherical with a smooth surface. The results of sequential chemical extraction and observation both indicated that the aluminosilicate phase plays an essential role in rare earth occurrences. Rare earth in CA from muffling and CFB is facilely leached, with a recovery of approximately 50%, which is higher than that from PC ash. This paper aims to offer a reference to easily understand the difference in metal recovery from coal ash.
ABSTRACT
Three-dimensional (3D) printing technology provides advanced technical support for designing personalized bone tissue engineering scaffold. In this study, two porous diffusing models, namely, average and layered perforated cylindrical scaffolds, were designed for bone tissue engineering scaffold. The designed models were fabricated by liquid crystal display mask stereolithography printing. Structural design and finite element mechanical analysis were conducted. 45S5 bioglass was selected as the raw material for preparing the printing inks for bone tissue engineering scaffolds. By adjusting the viscosity and temperature of the slurry, the maximum proportion of 45S5 bioglass (40 wt%) was added into the photosensitive resin for preparing 3D printing slurry. Our results indicated that an optimized sintering condition includes the debinding rate (0.5°C/min), and temperature raising rate (5°C/min) and sintering temperature (1100°C) were proposed to sinter 45S5 bioceramic scaffolds. The amorphous 45S5 bioglass showed good crystallization after sintering, and the scaffold porous structure showed good integrity. Micropores were observed in the struts which interconnected with each other. Moreover, the porosities were tested as 57% and 45% with a uniform pore distribution. The shrinkage rate was about 10% during sintering process due to binder burning and crystallization shrinkage. The compressive strength of the sintered scaffold was 0.71 ± 0.048 MPa and 2.13 ± 0.054 MPa, respectively, which are consistent with the finite element mechanical analysis simulation results. In conclusion, the layered perforated 45S5 bioglass scaffold shows good mechanical properties and porosity, indicating that it could be a promising candidate for bone tissue engineering.