Risk factors of prognosis for spontaneous cerebellar hemorrhage: a systematic review and meta-analysis.

BACKGROUND: The most deadly type of spontaneous intracerebral hemorrhage is spontaneous cerebellar hemorrhage (SCH). The purpose of this meta-analysis was to investigate risk factors for prognosis in SCH patients to provide a basis for taking preventive and therapeutic measures. METHODS: Seven electronic databases were searched from inception to May 2023 for randomized controlled trial, cohort study, case control study and cross-sectional study on prognosis of spontaneous cerebellar hemorrhage. The quality of the selected studies were assessed by the American Agency for Healthcare Research and Quality (AHRQ). To assess the impact of the included risk factors on the prognosis of spontaneous cerebellar hemorrhage, combined odds ratios (ORs) with matching 95% confidence intervals (CIs) were combined. RESULTS: Eight studies were included, including 539 participants. And a total of 31 potentially associated risk factors were identified. Ultimately, 6 risk factors were included in the meta-analysis after assessing. The factors supported by moderate evidence include the hydrocephalus (OR = 4.3, 95% CI: 2.33 to 7.91) and drug-induced coagulopathy (OR = 2.74, 95% CI: 1.23 to 6.09). The factors supported by limited evidence include the intraventricular bleeding(OR = 1.86, 95% CI: 1.13 to 3.07) and hematoma size>3 cm(OR = 3.18, 95% CI: 1.87 to 5.39). Meta-analysis revealed no association between hypertension, diabetes mellitus and SCH prognosis. CONCLUSION: The current meta-analysis revealed obvious risk factors for prognosis in spontaneous cerebellar hemorrhage patients, including hydrocephalus, drug-induced coagulopathy, intraventricular bleeding and hematoma size>3 cm.

Topological protection of dual-polarization biphoton states in photonic crystals.

Polarization control is a major issue in topological quantum optics that limits reliable generation and transmission of quantum states. This study presents what we believe to be a novel topological photonic crystal design that provides topological protection for biphoton pairs for both TE and TM polarization. By well-designed cell configurations within the lattice, two topological boundaries emerge that can accommodate TM and TE modes at the same time. By adjusting the dispersion curves, we can further design nonlinear four-wave mixing processes within the topological photonic crystals and provide theoretical explanations for the entanglement of the dual-polarization biphoton states. Numerical results confirm the robust transport of entangled photon pairs, even when subjected to sharp bending. Moreover, combining the dual-polarization topological photonic crystal with a polarization beam splitter enables the preparation of polarization-encoded maximally entangled states. Our work exhibits significant potential for applications in robust optical quantum information processing and quantum secure communication.

Genome-Wide Association Analysis of Yield-Related Traits and Candidate Genes in Vegetable Soybean.

Owing to the rising demand for vegetable soybean products, there is an increasing need for high-yield soybean varieties. However, the complex correlation patterns among quantitative traits with genetic architecture pose a challenge for improving vegetable soybean through breeding. Herein, a genome-wide association study (GWAS) was applied to 6 yield-related traits in 188 vegetable soybean accessions. Using a BLINK model, a total of 116 single nucleotide polymorphisms (SNPs) were identified for plant height, pod length, pod number, pod thickness, pod width, and fresh pod weight. Furthermore, a total of 220 genes were found in the 200 kb upstream and downstream regions of significant SNPs, including 11 genes encoding functional proteins. Among them, four candidate genes, Glyma.13G109100, Glyma.03G183200, Glyma.09G102200, and Glyma.09G102300 were analyzed for significant haplotype variations and to be in LD block, which encode MYB-related transcription factor, auxin-responsive protein, F-box protein, and CYP450, respectively. The relative expression of candidate genes in V030 and V071 vegetable soybean (for the plant height, pod number, and fresh pod weight of V030 were lower than those of the V071 strains) was significantly different, and these genes could be involved in plant growth and development via various pathways. Altogether, we identified four candidate genes for pod yield and plant height from vegetable soybean germplasm. This study provides insights into the genomic basis for improving soybean and crucial genomic resources that can facilitate genome-assisted high-yielding vegetable soybean breeding.

Reconstituted CD74+ NK cells trigger chronic graft versus host disease after allogeneic bone marrow transplantation.

Chronic graft-versus-host disease (cGVHD) is the most common long-term complication after allogeneic hematopoietic stem cell transplantation (allo-HSCT). The patients with pulmonary cGVHD in particular have a very poor prognosis. NK cells are the first reconstituted lymphocyte subset after allo-HSCT; however, the impact of reconstituted NK cells on cGVHD is unclear. Here, we found allogeneic recipients showed obvious pulmonary cGVHD. Surprisingly, deletion of reconstituted NK cells resulted in maximal relief of pulmonary cGVHD. Mechanistically, reconstituted NK cells with donor profiles modulated the pulmonary inflammatory microenvironment to trigger cGVHD. Reconstituted NK cells secreted IFN-γ and TNF-α to induce CXCL10 production by epithelial cells, which recruited macrophages and CD4+ T cells to the lungs. Then macrophages and CD4+ T cells were activated by the inflammatory microenvironment, thereby mediating lung injury. Through assessment of differences in cellular energy, we found that CD74+ NK cells with high mitochondrial potential and pro-inflammatory activity triggered pulmonary cGVHD. Furthermore, targeted elimination of CD74+ NK cells using the anti-CD74 antibody significantly alleviated pulmonary cGVHD but preserved the CD74- NK cells to exert graft-versus-leukemia (GVL) effects. Data from human samples corroborated our findings in mouse models. Collectively, our results reveal that reconstituted CD74+ NK cells trigger pulmonary cGVHD and suggest that administration of CD74 antibody was a potential therapeutic for patients with cGVHD.

Comparison of Novel 3D-printed Stepped Porous Metal Cones and Metaphyseal Sleeves for Reconstruction of Severe Knee Bone Defects: Short-term Clinical Outcomes.

OBJECTIVE: Both porous metal cones and metaphyseal sleeves are excellent implants for reconstructing severe bone defects in the knee joint, but they both exhibit design limitations. The porous metal cone, especially, has significant room for improvement in its shape design. The existing porous metal cones often feature a conical external surface with a relatively small taper, potentially compromising both rotational and axial stability. To improve both axial and rotational stability in porous metal cones, we developed a 3D-printed stepped porous metal cone. This study aimed to assess the short-term clinical outcome of the 3D-printed stepped porous metal cone and to compare it with the clinical outcome of patients who underwent revision total knee arthroplasty (rTKA) with the metaphyseal sleeves during the same period. METHOD: Patients who underwent total knee arthroplasty revision with metaphyseal bone defect reconstruction from 2019 to 2021 were retrospectively analyzed. A total of 61 patients were enrolled in the study, including 15 patients using 3D-printed stepped porous metal cones and 46 patients using metaphyseal metal sleeves. Thirty patients using metaphyseal sleeves were screened by propensity score matching method and compared with those using stepped cones. Analysis included the American Knee Society Score, the Hospital for Special Surgery knee score, the Western Ontario and McMaster Universities Arthritis index, the Short Form 12 (SF-12) health survey, and radiographic assessment with a mean follow-up of 28.5 ± 8.3 months. To conduct comparative analyses, unpaired Student's t-tests were employed for continuous variables, while categorical variables were analyzed using the appropriate Fisher exact or chi-squared test. RESULTS: In this study, the survival rates of both the stepped cone and metaphyseal sleeve were 100%. There was no statistically significant difference in postoperative knee function scores between the two groups (p > 0.05). However, patients in the cone group had significantly higher mental component summary scores on the SF-12 scale (p < 0.05) and higher increases in mean postoperative physical component summary scores than patients in the sleeve group (p < 0.05). In addition, patients in the cone group experienced fewer intraoperative and postoperative complications compared to the sleeve group. CONCLUSION: The 3D-printed stepped porous metal cone can effectively reconstruct bone defects in complex rTKA and provide satisfactory early clinical and radiographic results. The 3D-printed stepped cone provides a more stable structure similar to the sleeve while maintaining the original benefits of the cone making it a promising choice for rTKA.

Cytokine Storm Related to CD4+ T Cells in Influenza Virus-Associated Acute Necrotizing Encephalopathy.

Acute necrotizing encephalopathy (ANE) is a rare but deadly complication with an unclear pathogenesis. We aimed to elucidate the immune characteristics of H1N1 influenza virus-associated ANE (IANE) and provide a potential therapeutic approach for IANE. Seven pediatric cases from a concentrated outbreak of H1N1 influenza were included in this study. The patients' CD4+ T cells from peripheral blood decreased sharply in number but highly expressed Eomesodermin (Eomes), CD69 and PD-1, companied with extremely high levels of IL-6, IL-8 in the cerebrospinal fluid and plasma. Patient 2, who showed high fever and seizures and was admitted to the hospital very early in the disease course, received intravenous tocilizumab and subsequently showed a reduction in temperature and a stable conscious state 24 h later. In conclusion, a proinflammatory cytokine storm associated with activated CD4+ T cells may cause severe brain pathology in IANE. Tocilizumab may be helpful in treating IANE.

Generation of allogeneic CAR-NKT cells from hematopoietic stem and progenitor cells using a clinically guided culture method.

Cancer immunotherapy with autologous chimeric antigen receptor (CAR) T cells faces challenges in manufacturing and patient selection that could be avoided by using 'off-the-shelf' products, such as allogeneic CAR natural killer T (AlloCAR-NKT) cells. Previously, we reported a system for differentiating human hematopoietic stem and progenitor cells into AlloCAR-NKT cells, but the use of three-dimensional culture and xenogeneic feeders precluded its clinical application. Here we describe a clinically guided method to differentiate and expand IL-15-enhanced AlloCAR-NKT cells with high yield and purity. We generated AlloCAR-NKT cells targeting seven cancers and, in a multiple myeloma model, demonstrated their antitumor efficacy, expansion and persistence. The cells also selectively depleted immunosuppressive cells in the tumor microenviroment and antagonized tumor immune evasion via triple targeting of CAR, TCR and NK receptors. They exhibited a stable hypoimmunogenic phenotype associated with epigenetic and signaling regulation and did not induce detectable graft versus host disease or cytokine release syndrome. These properties of AlloCAR-NKT cells support their potential for clinical translation.

Pyroptotic T cell-derived active IL-16 has a driving function in ovarian endometriosis development.

Endometriosis, affecting 6%-10% of women, often leads to pain and infertility and its underlying inflammatory mechanisms are poorly understood. We established endometriosis models in wild-type and IL16KO mice, revealing the driver function of IL-16 in initiating endometriosis-related inflammation. Using an in vitro system, we confirmed iron overload-induced GSDME-mediated pyroptosis as a key trigger for IL-16 activation and release. In addition, our research led to the development of Z30702029, a compound inhibiting GSDME-NTD-mediated pyroptosis, which shows promise as a therapeutic intervention for endometriosis. Importantly, our findings extend beyond endometriosis, highlighting GSDME-mediated pyroptosis as a broader pathway for IL-16 release and offering insights into potential treatments for various inflammatory conditions.

Robotic-assisted total hip arthroplasty in patients with developmental dysplasia of the hip.

PURPOSES: Due to the morphological diversity of deformities, technical difficulties, improperly designed components, and so on, THA remains a challenging task in dysplastic hips, especially in highly dislocated hips. The purpose of this study was to comprehensively evaluate the clinical outcomes of robot-assisted THA in patients with DDH through a large cohort study, including the precision of acetabular cup positioning, indicators of inflammatory response, indicators of muscle damage, and complications. METHODS: We retrospectively analyzed patients with DDH who underwent THA in our prospectively constructed joint registry between August 2018 and August 2022. Finally, 147 manual THAs and 147 robotic-assisted THAs were included in the final analysis. Patient demographics, indicators of inflammation, indicators of muscle damage, operative time, Harris hip scores (HHS), and forgotten joint score (FJS) were recorded for analysis. The precision of the positioning of the acetabular component was assessed with plain radiographs. RESULTS: In the Crowe II/III groups, the reconstructed center of rotation (COR) in the robotic-assisted group was closer to the anatomical COR with less variation than the manual group (absolute horizontal distances of COR 3.5 ± 2.8 vs. 5.4 ± 4.9 mm, p < 0.05; absolute vertical distances of COR 6.4 ± 4.1 vs. 11.7 ± 8.2 mm, p = 0.001). For all Crowe subtypes, the robotic-assisted THA significantly increased the proportion of acetabular cups located in the safety zone within 5° (all p < 0.05). Interleukin-6 and creatine kinase levels were slightly lower and significantly different in the robotic-assisted group at three days postoperatively (all p < 0.05). CONCLUSIONS: Compared to the manual technique, the robot-assisted technique improved the precision and reproducibility of acetabular component positioning, particularly in DDH patients with Crowe types II/III. The robotic-assisted technique did not increase operative time, bleeding, complications, or revision rates, and had a slighter early inflammatory response and muscle damage.