ABSTRACT
Cu-Ni coatings were prepared on the surface of nickel by electrodeposition method, and Cu-Ni coatings were heat-treated in 25-900 °C. Heat-treated Cu-Ni coatings were characterized with scanning electron microscopy (SEM), energy dispersive x-ray analysis (EDAX) and X-ray diffraction (XRD) techniques, respectively. Effects of heat treatment temperature on the spectral properties of Cu-Ni coatings were studied. The surface of Cu-Ni coating is composed of the nodules. The nodules of Cu-Ni coating surface become smaller with the increase in heat treatment temperature in 25-600 °C. The nodules of Cu-Ni coating surface become smaller and the dividing line between the nodules becomes more blurred with the increase in heat treatment temperature in 600-900 °C. The contents of copper in Cu-Ni coating decrease from 82.52 at % to 78.30 at % with the increase in heat treatment temperature in the range of 25-900 °C; the contents of nickel in Cu-Ni coating increase from 17.48 at % to 21.70 at % with the increase in heat treatment temperature in the range of 25-900 °C. The crystal structure of Cu-Ni coating is Cu0:8lNi0.19 cubic crystal structure. The crystal structure of the CuO0.81Ni0.19 becomes more complete with the increase in heat treatment temperature in 25- 300 °C. Part of crystal structure of the Cu0.81AlNi0.19 can turn Cu0.8lNi0.19 cubic crystal structure into Cu3.8Ni cubic crystal structure, and is advantageous to Cu3.8Ni (311) and Cu0.81Ni0.19 (311) growth with the increase in heat treatment temperature in 600-900 °C.
ABSTRACT
This feature article describes the multiple interfaces in the breath figure (BF) method toward functional honeycomb films with ordered pores. If a drop of polymer solution in a volatile solvent such as carbon disulphide is placed in a humid environment, evaporative cooling leads to self-assembled arrays of condensed water droplets. After evaporation of the solvent and water, patterned pores can be formed. During this BF process, the interfaces between the solution and the substrate, the solution and water droplets, and the film surface and air play extremely important roles in determining both the structures and functions of the honeycomb films. Progress in the BF method is reviewed by emphasizing the roles of the interfacial interactions. The applications of hierarchical and functional honeycomb films in separation, biocatalysis, biosensing, templating, stimuli-responsive surfaces and adhesive surfaces are also discussed.
ABSTRACT
We report the synthesis and characterization of a series of hydroxyl-end-functionalized polystyrenes (PS-OH) and the formation of patterned porous films. The polymers were synthesized by chain end reaction of polystyrene having a bromide end group (PS-Br) with hydramines including ethanolamine, diethanol amine, 2-amino-1,3-propanediol, and 2-(2-aminoethoxy) ethanol. The polymers were characterized by gel permeation chromatography (GPC), nuclear magnetic resonance (NMR), matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF MS), and differential scanning calorimetry (DSC). It was found that the end groups can influence the glass transition temperature (T(g)) of the polystyrenes. The polymers with different end groups were then used to prepare honeycomb-patterned porous films by the breath figure method. Results reveal that the subtle chain-end modification leads to a dramatic change in the morphology of the films. Honeycomb films with large area ordered structure can be easily prepared from PS-OH. Effects of the end groups as well as blending PS-OH with PS-Br on the surface pore diameter, pore center distance, and the hierarchical structure were studied in detail. As supported by the results of polymer hydrophilicity, in situ observation of the film formation process, as well as the chain mobility, the film structure is supposed to be mainly determined by the precipitation of polystyrene at the solution/water droplet interface and the interfacial activity enhanced by the end groups.
