Exploration of identifying individual tumor tissue based on probabilistic model.

Variations in the tumor genome can result in allelic changes compared to the reference profile of its homogenous body source on genetic markers. This brings a challenge to source identification of tumor samples, such as clinically collected pathological paraffin-embedded tissue and sections. In this study, a probabilistic model was developed for calculating likelihood ratio (LR) to tackle this issue, which utilizes short tandem repeat (STR) genotyping data. The core of the model is to consider tumor tissue as a mixture of normal and tumor cells and introduce the incidence of STR variants (φ) and the percentage of normal cells (Mxn) as a priori parameters when performing calculations. The relationship between LR values and φ or Mxn was also investigated. Analysis of tumor samples and reference blood samples from 17 colorectal cancer patients showed that all samples had Log 10(LR) values greater than 1014. In the non-contributor test, 99.9% of the quartiles had Log 10(LR) values less than 0. When the defense's hypothesis took into account the possibility that the tumor samples came from the patient's relatives, LR greater than 0 was still obtained. Furthermore, this study revealed that LR values increased with decreasing φ and increasing Mxn. Finally, LR interval value was provided for each tumor sample by considering the confidence interval of Mxn. The probabilistic model proposed in this paper could deal with the possibility of tumor allele variability and offers an evaluation of the strength of evidence for determining tumor origin in clinical practice and forensic identification.

IL21R hypomethylation as a biomarker for distinguishing benign and malignant breast tumours.

Some benign and malignant breast tumours are similar in pathological morphology, which are difficult to be distinguished in clinical diagnosis. In this study, we intended to explore novel biomarkers for differential diagnosis of benign and malignant breast tumours. Methylation EPIC 850K beadchip and RNA-sequencing were used to analyse 29 tissue samples from patients with early-stage breast cancer (BC) and benign breast tumours for differently methylated and expressed genes. The altered methylation of IL21R was semi-quantitatively validated in an independent study with 566 tissue samples (279 BC vs. 287 benign breast tumours) using mass spectrometry. Binary logistic regression analysis was performed to evaluate the association between IL21R methylation and BC. BC-associated IL21R hypomethylation and overexpression were identified in the discovery round. In the validation round, BC patients presented significant IL21R hypomethylation compared to women with benign breast tumours (ORs ≥1.29 per-10% methylation, p-values ≤ 5.69E-14), and this hypomethylation was even enhanced in BC patients with ER-negative and PR-negative tumours as well as with triple-negative tumours. The methylation of IL21R showed efficient discriminatory power to distinguish benign breast tumours from BC (area under curve (AUC) = 0.88), and especially from ER-negative BC (AUC = 0.95), PR-negative BC (AUC = 0.93) and triple-negative BC (AUC = 0.96). We disclosed significant IL21R hypomethylation in patients with BC compared to women with benign breast tumours, and revealed the somatic change of DNA methylation could be a potential biomarker for molecular pathology of BC.

Improvement of nucleotide content of Cordyceps tenuipes by Schisandra chinensis: fermentation process optimization and application prospects.

Nucleotides are important components and the main indicators for judging Cordyceps quality. In this paper, the mixed fermentation process of Schisandra chinensis and Cordyceps tenuipes was systematically studied, and it was proposed that the fermentation products aqueous extract (S-ZAE) had antioxidant activity and anti-AChE ability. Herein, the results of a single factor showed that S. chinensis, yeast extract, inoculum amount, and pH had significant effects on nucleotide synthesis. The fermentation process optimization results were 3% glucose, 0.25% KH2PO4, 2.1% yeast extract, and S. chinensis 0.49% (m/v), the optimal fermentation conditions were 25℃, inoculum 5.8% (v/v), pH 3.8, 6 d. The yield of total nucleotides in the scale-up culture was 0.64 ± 0.027 mg/mL, which was 10.6 times higher than before optimization. S-ZAE has good antioxidant and anti-AChE activities (IC50 0.50 ± 0.050 mg/mL). This fermentation method has the advantage of industrialization, and its fermentation products have the potential to become good functional foods or natural therapeutic agents.

KDGene: knowledge graph completion for disease gene prediction using interactional tensor decomposition.

The accurate identification of disease-associated genes is crucial for understanding the molecular mechanisms underlying various diseases. Most current methods focus on constructing biological networks and utilizing machine learning, particularly deep learning, to identify disease genes. However, these methods overlook complex relations among entities in biological knowledge graphs. Such information has been successfully applied in other areas of life science research, demonstrating their effectiveness. Knowledge graph embedding methods can learn the semantic information of different relations within the knowledge graphs. Nonetheless, the performance of existing representation learning techniques, when applied to domain-specific biological data, remains suboptimal. To solve these problems, we construct a biological knowledge graph centered on diseases and genes, and develop an end-to-end knowledge graph completion framework for disease gene prediction using interactional tensor decomposition named KDGene. KDGene incorporates an interaction module that bridges entity and relation embeddings within tensor decomposition, aiming to improve the representation of semantically similar concepts in specific domains and enhance the ability to accurately predict disease genes. Experimental results show that KDGene significantly outperforms state-of-the-art algorithms, whether existing disease gene prediction methods or knowledge graph embedding methods for general domains. Moreover, the comprehensive biological analysis of the predicted results further validates KDGene's capability to accurately identify new candidate genes. This work proposes a scalable knowledge graph completion framework to identify disease candidate genes, from which the results are promising to provide valuable references for further wet experiments. Data and source codes are available at https://github.com/2020MEAI/KDGene.

Harnessing Ash for Sustainable CO2 Absorption: Current Strategies and Future Prospects.

This review explores the potential of using different types of ash, namely fly ash, biomass ash, and coal ash etc., as mediums for CO2 capture and sequestration. The diverse origins of these ash types-municipal waste, organic biomass, and coal combustion-impart unique physicochemical properties that influence their suitability and efficiency in CO2 absorption. This review first discusses the environmental and economic implications of using ash wastes, emphasizing the reduction in landfill usage and the transformation of waste into value-added products. Then the chemical/physical treatments of ash wastes and their inherent capabilities in binding or reacting with CO2 are introduced, along with current methodologies utilize these ashes for CO2 sequestration, including mineral carbonation and direct air capture techniques. The application of using ash wastes for CO2 capture are highlighted, followed by the discussion regarding challenges associated with ash-based CO2 absorption approach. Finally, the article projects into the future, proposing innovative approaches and technological advancements needed to enhance the efficacy of ash in combating the increasing CO2 levels. By providing a comprehensive analysis of current strategies and envisioning future prospects, this review aims to contribute to the field of sustainable CO2 absorption and environmental management.

Endodontic microsurgery outcomes over 10 years and associated prognostic factors: a retrospective cohort study.

INTRODUCTION: This retrospective cohort study aimed to evaluate long-term healing outcomes (10-17.5 years) following contemporary endodontic microsurgery (EMS) and identify associated prognostic factors. METHODS: Clinical and radiographic data of an EMS cohort (2006-2013) from the electronic data base of Dental Hospital were reviewed retrospectively by two independent examiners to determine their survival and healing outcomes, and potential prognostic factors analyzed by Cox proportional hazards regression and logistic regression (α = 0.05). RESULTS: Through strict inclusion and exclusion criteria, and 721 EMS-treated teeth in the cohort, 309 (42.9%) were included (male, 35.0%; female, 65.0%; age, 45.83 ± 15.53 years) with mean final follow-up of 152.26 ± 26.37 months (range, 120-211; median, 148). Clinical and radiographic assessments found 80.5% of 10 years survival rate with 63.4% of success. Collectively, tooth type, tooth mobility, preoperative lesion size, clinical crown-root ratio, and crown restorations at follow-up were significantly associated with long-term success and survival over 10 years. CONCLUSIONS: The preoperative status and condition of the tooth including its alveolar bone support, and adequate full crown restorations may be relevant prognostic determinants of success and survival following EMS over time.

Bio-Polyethylene and Polyethylene Biocomposites: An Alternative toward a Sustainable Future.

Polyethylene (PE), a highly prevalent non-biodegradable polymer in the field of plastics, presents a waste management issue. To alleviate this issue, bio-based PE (bio-PE), derived from renewable resources like corn and sugarcane, offers an environmentally friendly alternative. This review discusses various production methods of bio-PE, including fermentation, gasification, and catalytic conversion of biomass. Interestingly, the bio-PE production volumes and market are expanding due to the growing environmental concerns and regulatory pressures. Additionally, the production of PE and bio-PE biocomposites using agricultural waste as filler materials, highlights the growing demand for sustainable alternatives to conventional plastics. According to previous studies, addition of ≈50% defibrillated corn and abaca fibers into bio-PE matrix and a compatibilizer, results in the highest Young's modulus of 4.61 and 5.81 GPa, respectively. These biocomposites have potential applications in automotive, building construction, and furniture industries. Moreover, the advancement made in abiotic and biotic degradation of PE and PE biocomposites is elucidated to address their environmental impacts. Finally, the paper concludes with insights into the opportunities, challenges, and future perspectives in the sustainable production and utilization of PE and bio-PE biocomposites. In summary, production of PE and bio-PE biocomposites can contribute to a cleaner and sustainable future.

A Computational and Chemical Design Strategy for Manipulating Glycan-Protein Recognition.

Glycans are complex biomolecules that encode rich information and regulate various biological processes, such as fertilization, host-pathogen binding, and immune recognition, through interactions with glycan-binding proteins. A key driving force for glycan-protein recognition is the interaction between the π electron density of aromatic amino acid side chains and polarized C─H groups of the pyranose (termed the CH-π interaction). However, the relatively weak binding affinity between glycans and proteins has hindered the application of glycan detection and imaging. Here, computational modeling and molecular dynamics simulations are employed to design a chemical strategy that enhances the CH-π interaction between glycans and proteins by genetically incorporating electron-rich tryptophan derivatives into a lectin PhoSL, which specifically recognizes core fucosylated N-linked glycans. This significantly enhances the binding affinity of PhoSL with the core fucose ligand and enables sensitive detection and imaging of core fucosylated glycans in vitro and in xenograft tumors in mice. Further, the study showed that this strategy is applicable to improve the binding affinity of GafD lectin for N-acetylglucosamine-containing glycans. The approach thus provides a general and effective way to manipulate glycan-protein recognition for glycoscience applications.

Strategies to Enhance the Electrochromic Properties of Conjugated Polymers Bearing Pyromellitic Diimide Acceptors.

A series of conjugated polymers bearing thiophene-based donors and pyromellitic diimide (PMDI) acceptor were prepared, and their electrochromic (EC) properties were studied via using fabricated thin-film EC devices. It was observed that structurally regular alternating polymers with fewer (1 and 2) thiophene donors do not exhibit any EC properties while increasing the number of donors eventually led to the emergence of orange-red-to-green colour switching. On this basis, two more random co-polymers containing higher donor-to-acceptor ratios were synthesized to further improve EC switching properties. The two polymers, which bear a PMDI-to-thiophene ratio of ca. 1:7 and 1:8, revealed orange red-to-blue colour switching and generally improved optical contrasts and switching speeds in both the visible and near infra-red (NIR) region. In addition, the subtle modulation of polymer colour and hue via variation of the number of thiophene donors was evident through colorimetric study. This work therefore demonstrates the potential and possibility of using the PMDI acceptor unit to construct EC-active conjugated polymers, and considerations for future tuning of colour and switching performances.

Dynamics of seaweed-inspired piezoelectric plates for energy harvesting from oscillatory cross flow.

Inspired by the vibrations of aquatic plants such as seaweed in the unsteady flow fields generated by free-surface waves, we investigate a novel device based on piezoelectric plates to harvest energy from oscillatory cross flows. Towards this end, numerical studies are conducted using a flow-structure-electric interaction model to understand the underlying physical mechanisms involved in the dynamics and energy harvesting performance of one or a pair of piezoelectric plates in an oscillatory cross flow. In a single-plate configuration, both periodic and irregular responses have been observed depending on parameters such as normalized plate stiffness and Keulegan-Carpenter number. Large power harvesting is achieved with the excitation of natural modes. Besides, when the time scale of the motion and the intrinsic time scale of the circuit are close to each other the power extraction is enhanced. In a two-plate configuration with tandem formation, the hydrodynamic interaction between the two plates can induce irregularity in the response. In terms of energy harvesting, two counteracting mechanisms have been identified, shielding and energy recovery. The shielding effect reduces plate motion and energy harvesting, whereas with the energy recovery effect one plate is able to recovery energy from the wake of another for performance enhancement. The competition between these mechanisms leads to constructive or destructive interactions between the two plates. These results suggest that for better performance the system should be excited at its natural period, which should be close to the intrinsic time scale of the circuit. Moreover, using a pair of plates in a tandem formation can further improve the energy harvesting capacity when conditions for constructive interaction are satisfied.

GRAF1 Acts as a Downstream Mediator of Parkin to Regulate Mitophagy in Cardiomyocytes.

Cardiomyocytes rely on proper mitochondrial homeostasis to maintain contractility and achieve optimal cardiac performance. Mitochondrial homeostasis is controlled by mitochondrial fission, fusion, and mitochondrial autophagy (mitophagy). Mitophagy plays a particularly important role in promoting the degradation of dysfunctional mitochondria in terminally differentiated cells. However, the precise mechanisms by which this is achieved in cardiomyocytes remain opaque. Our study identifies GRAF1 as an important mediator in PINK1-Parkin pathway-dependent mitophagy. Depletion of GRAF1 (Arhgap26) in cardiomyocytes results in actin remodeling defects, suboptimal mitochondria clustering, and clearance. Mechanistically, GRAF1 promotes Parkin-LC3 complex formation and directs autophagosomes to damaged mitochondria. Herein, we found that these functions are regulated, at least in part, by the direct binding of GRAF1 to phosphoinositides (PI(3)P, PI(4)P, and PI(5)P) on autophagosomes. In addition, PINK1-dependent phosphorylation of Parkin promotes Parkin-GRAF1-LC3 complex formation, and PINK1-dependent phosphorylation of GRAF1 (on S668 and S671) facilitates the clustering and clearance of mitochondria. Herein, we developed new phosphor-specific antibodies to these sites and showed that these post-translational modifications are differentially modified in human hypertrophic cardiomyopathy and dilated cardiomyopathy. Furthermore, our metabolic studies using serum collected from isoproterenol-treated WT and GRAF1CKO mice revealed defects in mitophagy-dependent cardiomyocyte fuel flexibility that have widespread impacts on systemic metabolism. In summary, our study reveals that GRAF1 co-regulates actin and membrane dynamics to promote cardiomyocyte mitophagy and that dysregulation of GRAF1 post-translational modifications may underlie cardiac disease pathogenesis.

Copper/Chiral Phosphoric-Acid-Catalyzed Intramolecular Reductive Isocyanide-Alkene (1 + 2) Cycloaddition: Enantioselective Construction of 2-Azabicyclo[3.1.0]hexanes.

Enantioenriched 2-azabicyclo[3.1.0]hexanes are accessed from readily available allyl substituted α-isocyanoesters by intramolecular (1 + 2) cycloaddition with the olefinic moiety and isocyano carbon as the respective C2 and C1 units. Cyclopropanation is initiated by 1,1-hydrocupration of isocyanide followed by formimidoylcopper to copper α-aminocarbenoid equilibration and subsequent (1 + 2) cycloaddition. The unprecedented copper/chiral phosphoric acid (CPA) catalytic system can be operated in the presence of water under air, delivering a variety of 2-azabicyclo[3.1.0]hexanes containing an angular all-carbon quaternary stereocenter in good to excellent yields and enantioselectivity.

Synergistic Combination of Sb2Si2Te6 Additives for Enhanced Average ZT and Single-Leg Device Efficiency of Bi0.4Sb1.6Te3-based Composites.

Thermoelectric materials are highly promising for waste heat harvesting. Although thermoelectric materials research has expanded over the years, bismuth telluride-based alloys are still the best for near-room-temperature applications. In this work, a ≈38% enhancement of the average ZT (300-473 K) to 1.21 is achieved by mixing Bi0.4Sb1.6Te3 with an emerging thermoelectric material Sb2Si2Te6, which is significantly higher than that of most BiySb2-yTe3-based composites. This enhancement is facilitated by the unique interface region between the Bi0.4Sb1.6Te3 matrix and Sb2Si2Te6-based precipitates with an orderly atomic arrangement, which promotes the transport of charge carriers with minimal scattering, overcoming a common factor that is limiting ZT enhancement in such composites. At the same time, high-density dislocations in the same region can effectively scatter the phonons, decoupling the electron-phonon transport. This results in a ≈56% enhancement of the thermoelectric quality factor at 373 K, from 0.41 for the pristine sample to 0.64 for the composite sample. A single-leg device is fabricated with a high efficiency of 5.4% at ΔT = 164 K further demonstrating the efficacy of the Sb2Si2Te6 compositing strategy and the importance of the precipitate-matrix interface microstructure in improving the performance of materials for relatively low-temperature applications.

3D printing of polyvinyl alcohol hydrogels enabled by aqueous two-phase system.

The synthesis of PVA hydrogels (PVA-Hy) requires a highly basic environment (e.g., an aqueous solution of sodium hydroxide, NaOH, 14% w/w, 4.2 M), but the rapid crosslinking of PVA due to high pH makes it challenging to perform layer-by-layer three-dimensional (3D) printing of PVA-Hy. This work demonstrated 3D printing of PVA-Hy in moderate alkaline conditions (e.g., NaOH, 1% w/w, 0.3 M) assisted by aqueous two-phase system (ATPS). Salting out of PVA to form ATPS allowed temporal shape retention of a 3D-printed PVA structure while it was physically crosslinked in moderate alkaline conditions. Crucially, the layer-to-layer adhesion of PVA was facilitated by delayed crosslinking of PVA that required additional reaction time and overlapping between the layers. To verify this principle, we studied the feasibility of direct ink write (DIW) 3D printing of PVA inks (5-25% w/w, µ = 0.1-20 Pa s, and MW = 22 000 and 74 800) in aqueous embedding media offering three distinct chemical environments: (1) salts for salting out (e.g., Na2SO4), (2) alkali hydroxides for physical crosslinking (e.g., NaOH), and (3) a mixture of salt and alkali hydroxide. Our study suggested the feasibility of 3D-printed PVA-Hy using the mixture of salt and alkali hydroxide, demonstrating a unique concept of embedded 3D printing enabled by ATPS for temporary stabilization of the printed structures to facilitate 3D fabrication.

Pore Structure and Fractal Dimension in Marine Mature Silicon-Rich Shale of the Dalong Formation in Western Hubei.

How shale reservoirs and gas contents are affected by the pore structure of shale is very important. Low-temperature nitrogen isothermal adsorption experiments were conducted by us to investigate the pore structure of the Dalong Formation shale. We measured the specific surface area and fractal dimension of the pores and also considered the mineral fraction and organic matter content of the rock. The results show that the Dalong Formation shale contains a lot of organic carbon, with a total organic carbon (TOC) value between 1.20 and 10.82% (mean: 5.02%). Quartz and clay minerals are the main components of the shale, with quartz making up 40.30 to 85.60% (mean: 67.21%) and clay minerals making up 9.20 to 34.10% (mean: 20.26%) of the shale. Most of the pore space in the shale of the Dalong Formation is formed by intragranular and intergranular pores, organic matter pores, and some microfissures. The pore structure is complex, with parallel-plate and ink-bottle pores being the most common types. Most of the pores are 0-2 or 2-5 nm in size. D1 and D2 are the fractal dimensions, with averages of 2.66 and 2.81, respectively. D1 can range from 2.55 to 2.78, while D2 can range from 2.66 to 2.94. The TOC content, mineral composition, and pore structure characteristics determine the fractal dimension. Higher levels of the TOC content, quartz mineral content, and specific pore surface area result in a higher fractal dimension, while higher levels of feldspar content result in a lower one. There is no apparent correlation to clay minerals or other mineral compositions.

Thirty-eight cases of paraovarian cysts in children and adolescents: a retrospective study.

PURPOSE: Paraovarian cysts in children and adolescents can be challenging to accurately diagnose prior to surgery. Our objective is to outline the clinical characteristics of paraovarian cysts and enhance the precision of diagnosing paraovarian cysts in this age group. METHODS: We retrospectively analyzed all patients with paraovarian cysts who underwent surgery in our department from 2013 to 2021. The review focused on demographic characteristics, clinical manifestations, intraoperative findings, and postoperative pathology of these patients. RESULTS: This cohort was composed of 38 children with paraovarian cysts. The average diameter of the cysts was 4.8 cm (range 0.5-10 cm). Among the cases, 25 (65.8%) had adnexal torsion. Postoperative pathology showed that all cases were simple cysts with serous fluid. After the procedure, the patients were monitored for a period ranging from 12 to 108 months. B-ultrasound and physical examination did not reveal any significant abnormalities. CONCLUSIONS: B-ultrasound can help diagnose paraovarian cysts by detecting slight deviation movement between the cyst and the uterus. The presence of adnexa torsion in children and adolescents with paraovarian cysts does not depend on BMI, but rather on the size of cysts. Laparoscopic cyst removal has proven to be an effective surgical approach with favorable outcomes.

Understanding and fine tuning the propensity of ATP-driven liquid-liquid phase separation with oligolysine.

Liquid-liquid phase separation (LLPS) plays a pivotal role in the organization and functionality of living cells. It is imperative to understand the underlying driving forces behind LLPS and to control its occurrence. In this study, we employed coarse-grained (CG) simulations as a research tool to investigate systems comprising oligolysine and adenosine triphosphate (ATP) under conditions of various ionic concentrations and oligolysine lengths. Consistent with experimental observations, our CG simulations captured the formation of LLPS upon the addition of ATP and tendency of dissociating under high ionic concentration. The electrostatic interaction between oligolysine and ATP is of great importance in forming LLPS. An in-depth analysis on the structural properties of LLPS was conducted, where the oligolysine structure remained unchanged with increased ionic concentration and the addition of ATP led to a more pronounced curvature, aligning with the observed enhancement of α-helical secondary structure in experiments. In terms of the dynamic properties, the introduction of ATP led to a significant reduction in translational and vibrational degrees of freedom but not rotational degrees of freedom. Through keeping the total number of charged residues constant and varying their entropic effects, we constructed two systems of similar biochemical significance and further validated the entropy effects on the LLPS formation. These findings provide a deeper understanding of LLPS formation and shed lights on the development of novel bioreactor and primitive artificial cells for synthesizing key chemicals for certain diseases.

Application of Laennec extrathecal blockade combined with indocyanine green fluorescence imaging in laparoscopic anatomic hepatectomy.

OBJECTIVE: To investigate the safety and application value of combining Laennec extracapsular occlusion with ICG fluorescence imaging in laparoscopic anatomic hepatectomy. METHODS: Complete laparoscopic dissection was performed outside the Laennec sheath, blocking Glisson's pedicle of the corresponding liver segment or lobe. An appropriate amount of indocyanine green (ICG) dye was intravenously injected, and the boundary line between the pre-cut liver segment and liver lobe was identified using fluorescence laparoscopy. Complete resection of the liver segment or lobe was performed based on anatomical markers. Clinical data, including operation time, intraoperative blood loss, postoperative hospital stay, and postoperative complications, were collected. RESULTS: A total of 14 cases were included in the study, including seven cases of primary liver cancer, three cases of metastatic liver cancer, three cases of intrahepatic bile duct calculi, and one case of hepatic hemangioma. All 14 patients underwent anatomic hepatectomy under fluorescent laparoscopy, with four cases involving the right liver, seven cases involving the left liver, two cases involving the right anterior lobe, and one case involving the right posterior lobe. CONCLUSION: Combining laparoscopic follow-up of the Laennec membrane with Glisson outer sheath block and intraoperative ICG fluorescence imaging provides real-time guidance for locating the resection boundaries during anatomic hepatectomy. This approach helps in controlling intraoperative bleeding, reducing operation time, and ensuring high safety. It holds significant value in clinical application.

Fucosyltransferase 8 regulates adult neurogenesis and cognition of mice by modulating the Itga6-PI3K/Akt signaling pathway.

Fucosyltransferase 8 (Fut8) and core fucosylation play critical roles in regulating various biological processes, including immune response, signal transduction, proteasomal degradation, and energy metabolism. However, the function and underlying mechanism of Fut8 and core fucosylation in regulating adult neurogenesis remains unknown. We have shown that Fut8 and core fucosylation display dynamic features during the differentiation of adult neural stem/progenitor cells (aNSPCs) and postnatal brain development. Fut8 depletion reduces the proliferation of aNSPCs and inhibits neuronal differentiation of aNSPCs in vitro and in vivo, respectively. Additionally, Fut8 deficiency impairs learning and memory in mice. Mechanistically, Fut8 directly interacts with integrin α6 (Itga6), an upstream regulator of the PI3k-Akt signaling pathway, and catalyzes core fucosylation of Itga6. Deletion of Fut8 enhances the ubiquitination of Itga6 by promoting the binding of ubiquitin ligase Trim21 to Itga6. Low levels of Itga6 inhibit the activity of the PI3K/Akt signaling pathway. Moreover, the Akt agonist SC79 can rescue neurogenic and behavioral deficits caused by Fut8 deficiency. In summary, our study uncovers an essential function of Fut8 and core fucosylation in regulating adult neurogenesis and sheds light on the underlying mechanisms.

2D Ferromagnetic M3 GeTe2 (M = Ni/Fe) for Boosting Intermediates Adsorption toward Faster Water Oxidation.

In this work, 2D ferromagnetic M3 GeTe2 (MGT, M = Ni/Fe) nanosheets with rich atomic Te vacancies (2D-MGTv ) are demonstrated as efficient OER electrocatalyst via a general mechanical exfoliation strategy. X-ray absorption spectra (XAS) and scanning transmission electron microscope (STEM) results validate the dominant presence of metal-O moieties and rich Te vacancies, respectively. The formed Te vacancies are active for the adsorption of OH* and O* species while the metal-O moieties promote the O* and OOH* adsorption, contributing synergistically to the faster oxygen evolution kinetics. Consequently, 2D-Ni3 GeTe2v exhibits superior OER activity with only 370 mV overpotential to reach the current density of 100 mA cm-2 and turnover frequency (TOF) value of 101.6 s-1 at the overpotential of 200 mV in alkaline media. Furthermore, a 2D-Ni3 GeTe2v -based anion-exchange membrane (AEM) water electrolysis cell (1 cm2 ) delivers a current density of 1.02 and 1.32 A cm-2 at the voltage of 3 V feeding with 0.1 and 1 m KOH solution, respectively. The demonstrated metal-O coordination with abundant atomic vacancies for ferromagnetic M3 GeTe2 and the easily extended preparation strategy would enlighten the rational design and fabrication of other ferromagnetic materials for wider electrocatalytic applications.