Softness-Aided Mild Hyperthermia Boosts Stiff Nanomedicine by Regulating Tumor Mechanics.

Aberrant tumor mechanical microenvironment (TMME), featured with overactivated cancer-associated fibroblasts (CAFs) and excessive extracellular matrix (ECM), severely restricts penetration and accumulation of cancer nanomedicines, while mild-hyperthermia photothermal therapy (mild-PTT) has been developed to modulate TMME. However, photothermal agents also encounter the barriers established by TMME, manifesting in limited penetration and heterogeneous distribution across tumor tissues and ending with attenuated efficiency in TMME regulation. Herein, it is leveraged indocyanine green (ICG)-loaded soft nanogels with outstanding deformability, for efficient tumor penetration and uniform distribution, in combination with mild-PTT to achieve potent TMME regulation by inhibiting CAFs and degrading ECM. As a result, doxorubicin (DOX)-loaded stiff nanogels gain greater benefits in tumor penetration and antitumor efficacy than soft counterparts from softness-mediated mild-PTT. This study reveals the crucial role of nanomedicine mechanical properties in tumor distribution and provides a novel strategy for overcoming the barriers of solid tumors with soft deformable nanogels.

Nanopatterning of beaded poly(lactic acid) nanofibers for highly electroactive, breathable, UV-shielding and antibacterial protective membranes.

Despite great potential in fabrication of biodegradable protective membranes by electrospinning of poly(lactic acid) (PLA) nanofibers, it is still thwarted by smooth surfaces and poor electroactivity that challenge the promotion of electret properties and long-term air filtration performance. Here, a microwave-assisted synthetic method was used to customize dielectric TiO2 nanocrystals of ultrasmall and uniform dimensions (∼30 nm), which were homogeneously embedded at beaded PLA nanofibers (PLA@TiO2, diameter of around 280 nm) by the combined "electrospinning-electrospray" approach. With small amounts of TiO2 (2, 4 and 6 wt%), the nanopatterned PLA@TiO2 nanofibrous membranes (NFMs) were characterized by largely increased dielectric constants (nearly 1.9), surface potential (up to 1.63 kV) and triboelectric properties (output voltage of 12.2 V). Arising from the improved electroactivity and self-charging mechanisms, the nanopatterned PLA@TiO2 NFMs exhibited remarkable PM0.3 filtration properties (97.9 %, 254.6 Pa) even at the highest airflow rate of 85 L/min, surpassing those of pure PLA membranes (86.2 %, 483.7 Pa). This was moreover accompanied by inhibition rates of 100 % against both E. coli and S. aureus, as well as excellent UV-blocking properties (UPF as high as 3.8, TUVA of 50.9 % and TUVB of 20.1 %). The breathable and electroactive nanopatterned PLA NFMs permit promising applications in multifunctional protective membranes toward excellent UV shielding and high-efficiency removal of both PMs and pathogens.

Mechano-boosting nanomedicine antitumour efficacy by blocking the reticuloendothelial system with stiff nanogels.

Nanomedicine has been developed for cancer therapy over several decades, while rapid clearance from blood circulation by reticuloendothelial system (RES) severely limits nanomedicine antitumour efficacy. We design a series of nanogels with distinctive stiffness and investigate how nanogel mechanical properties could be leveraged to overcome RES. Stiff nanogels are injected preferentially to abrogate uptake capacity of macrophages and temporarily block RES, relying on inhibition of clathrin and prolonged liver retention. Afterwards, soft nanogels deliver doxorubicin (DOX) with excellent efficiency, reflected in high tumour accumulation, deep tumour penetration and outstanding antitumour efficacy. In this work, we combine the advantage of stiff nanogels in RES-blockade with the superiority of soft nanogels in drug delivery leads to the optimum tumour inhibition effect, which is defined as mechano-boosting antitumour strategy. Clinical implications of stiffness-dependent RES-blockade are also confirmed by promoting antitumour efficacy of commercialized nanomedicines, such as Doxil and Abraxane.

Discovery and optimization of a potent and selective indazolamine series of IRAK4 inhibitors.

IRAK4 is a key mediator of innate immunity. There is a high interest in identifying novel IRAK4 inhibitors for the treatment of inflammatory autoimmune diseases. We describe here a highly potent and selective IRAK4 inhibitor (HS271) that exhibited superior enzymatic and cellular activities, as well as excellent pharmacokinetic properties. HS271 displayed robust in vivo anti-inflammatory efficacy as evaluated in rat models of LPS induced TNFα production and collagen-induced arthritis.

Electrospinning Preparation of La-Doped SnO2 Hollow Nanofibers: An Improvement of Their Gas Sensing Properties.

SnO2 hollow nanofibers with different amount of La-doped were prepared by electrostatic spinning method. Their composition, morphology and structure were characterized by XRD, SEM, BET and XPS respectively and their gas sensing properties were also investigated. The results showed that the hollow nanofibers with the molar ratio of tin to La of 7% had the best sensitivity to ammonia of 500 ppm at the temperature of 300 °C, and the sensitivity value reached 480, which was 10 times that of pure SnO2. And its response time was also significantly shortened.

One-pot hydrothermal synthesis of Nitrogen-doped graphene as high-performance anode materials for lithium ion batteries.

Nitrogen-doped (N-doped) graphene has been prepared by a simple one-step hydrothermal approach using hexamethylenetetramine (HMTA) as single carbon and nitrogen source. In this hydrothermal process, HMTA pyrolyzes at high temperature and the N-doped graphene subsequently self-assembles on the surface of MgO particles (formed by the Mg powder reacting with H2O) during which graphene synthesis and nitrogen doping are simultaneously achieved. The as-synthesized graphene with incorporation of nitrogen groups possesses unique structure including thin layer thickness, high surface area, mesopores and vacancies. These structural features and their synergistic effects could not only improve ions and electrons transportation with nanometer-scale diffusion distances but also promote the penetration of electrolyte. The N-doped graphene exhibits high reversible capacity, superior rate capability as well as long-term cycling stability, which demonstrate that the N-doped graphene with great potential to be an efficient electrode material. The experimental results provide a new hydrothermal route to synthesize N-doped graphene with potential application for advanced energy storage, as well as useful information to design new graphene materials.

One-pot synthesis of bismuth oxyhalide/oxygen-rich bismuth oxyhalide heterojunction and its photocatalytic activity.

BiOBr/Bi24O31Br10 heterojunction photocatalysts were prepared by a facile solvothermal method for the first time. The X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FT-IR), N2 sorption, UV-vis diffuse reflectance spectroscopy (UV-vis DRS) and photoluminescence (PL) were applied to investigate the structures, morphologies, surface areas and photocatalytic properties of as-prepared samples. The photocatalytic activity of the samples was evaluated by the photocatalytic degradation of Rhodamine B under the visible-light irradiation. The results showed that BiOBr/Bi24O31Br10 heterojunctions with the different Bi24O31Br10 contents could be obtained by simply adjusting the amount of NaOH solution, all of which exhibited enhanced photocatalytic activity compared with bare BiOBr or Bi24O31Br10. Among them, the BiOBr/Bi24O31Br10 heterojunction prepared with 1.5ml of NaOH solution possessed the highest photocatalytic activity. The photogenerated holes and ·O2(-) radicals were confirmed to be the main active species responsible for the photodegradation of RhB. The mechanism of enhanced photocatalytic activity was discussed and the transfer process of the photogenerated charges carrier between BiOBr and Bi24O31Br10 was proposed on the basis of the estimated energy band positions.

Cadmium sulphide quantum dots sensitized hierarchical bismuth oxybromide microsphere with highly efficient photocatalytic activity.

Cadmium sulphide (CdS) quantum dots (QDs) sensitized that hierarchical bismuth oxybromide (BiOBr) photocatalysts were synthesized via a facile solvothermal approach for the first time, which were characterized by XRD, XPS, SEM, TEM, PL, and UV-vis DRS spectra. The photocatalytic activities were evaluated by the decomposition of methyl orange (MO) under visible light irradiation with commercial TiO(2) Degussa P25 as reference. The results revealed that CdS-BiOBr photocatalysts had strong light absorption in the visible light region compared with pure BiOBr. All CdS-BiOBr photocatalysts possessed higher photocatalytic activity than pure BiOBr and Degussa P25 under the visible light irradiation. The highest activity was obtained by 2%CdS-BiOBr. The enhanced photocatalytic performances were attributed to the matched band potentials of CdS QDs and BiOBr, which resulted in the efficient separation of photogenerated electron-hole pairs. Based on the experimental results, a reasonable photocatalytic mechanism over CdS-BiOBr photocatalysts was proposed. And the photodegradation of MO are associated with ()O(2)(-) radicals and the photogenerated holes on the valance bands of CdS QDs and BiOBr.

Preparation and characterization of a titanium bonding porcelain.

The titanium bonding porcelain was synthesized through normal melting-derived route using borate-silicate system. The porcelain was characterized by thermal expansion, X-ray diffraction, scanning electron microscope and cytotoxicity tests. The results of X-ray diffraction showed that the main phase of the bonding porcelain was SnO2. The SnO2 microcrystals precipitated from the glass matrix when the SnO2 content was increased. The thermal expansion coefficient of bonding porcelains decreased with the increasing concentration of SiO2. The thermal expansion coefficient of bonding porcelains first decreased slightly with the increasing of B2O3 concentration (from 0 wt% to 10 wt%) and then increased to about 9.4×10(-6)/°C(from 10 wt% to 12 wt%). As an intermediate, B2O3 can act as both network formers and modifiers, depending on the relationship between the concentration of basic oxides and intermediates. The Vickers hardness of bonding porcelains increased with the increase of SnO2 concentration. When SnO2 concentration was 6 wt%, only Si and Sn elements attended the reaction between titanium and porcelain and mainly adhesive fracture was found at Ti-porcelain interface. When SnO2 concentration was 12 wt%, failure of the titanium-porcelain predominantly occurred in the bonding porcelain and mainly cohesive fracture was found at Ti-porcelain interface. The methyl thiazolyl tetrazolium assay results demonstrated that the cytotoxicity of the titanium porcelain was ranked as 0.

[Preliminary study on the reliability and validity of Chinese version of the Abbreviated Burn Specific Health Scale].

OBJECTIVE: To assess the reliability and validity of Chinese version of the Abbreviated Burn Specific Health Scale (BSHS-A). METHODS: BSHS-A was translated into Chinese and revised. Eighty-two former burn patients discharged from the Second Affiliated Hospital of Kunming Medical College, and now in rehabilitation stage, were surveyed with the Chinese version of BSHS-A according to the simple random sampling. The psychometric properties of the scale, including internal consistency, test-retest reliability, content validity and discriminant validity, were analyzed. RESULTS: One hundred and sixty-seven scales were sent to 82 participants and all of them were completed and returned. The rate of eligible questionnaire was 98.2% after eliminating 3 ineligible questionnaires. The Crobach's alpha coefficient of total score of questionnaire was 0.97, and in all domains and sub-domains ranged from 0.83 to 0.96. The test-retest coefficients from 20 participants retested within one week were between 0.74 and 0.98 (P < 0.05 or P < 0.01). Forty-eight participants surveyed within 6 months after burn were divided into mild/moderate burn group and severe burn group. The total scores of questionnaire, scores in all domains and sub-domains of patients in the latter group were lower than those in the former group (P < 0.05 or P < 0.01). CONCLUSIONS: The Chinese version of BSHS-A shows satisfactory reliability and validity, and it can be used to investigate quality of life of Chinese burn patients in rehabilitation stage.