ABSTRACT
In correlated oxides, collaborative manipulation on light intensity, wavelength, pulse duration and polarization has yielded many exotic discoveries, such as phase transitions and novel quantum states. In view of potential optoelectronic applications, tailoring long-lived static properties by light-induced effects is highly desirable. So far, the polarization state of light has rarely been reported as a control parameter for this purpose. Here, we report polarization-dependent metal-to-insulator transition (MIT) in phase-separated manganite thin films, introducing a new degree of freedom to control static MIT. Specifically, we observed giant photoinduced resistance jumps with striking features: (1) a single resistance jump occurs upon a linearly polarized light incident with a chosen polarization angle, and a second resistance jump occurs when the polarization angle changes; (2) the amplitude of the second resistance jump depends sensitively on the actual change of the polarization angles. Linear transmittance measurements reveal that the origin of the above phenomena is closely related to the coexistence of anisotropic micro-domains. Our results represent a first step to utilize light polarization as an active knob to manipulate static phase transitions, pointing towards new pathways for nonvolatile optoelectronic devices and sensors.
ABSTRACT
Two-dimensional electron gas (2DEG) at oxide interfaces exhibits various exotic properties stemming from interfacial inversion and symmetry breaking. In this work, we report large nonlinear transverse conductivities in the LaAlO3/KTaO3 interface 2DEG under zero magnetic field. Skew scattering was identified as the dominant origin based on the cubic scaling of nonlinear transverse conductivity with linear longitudinal conductivity and 3-fold symmetry. Moreover, gate-tunable nonlinear transport with pronounced peak and dip was observed and reproduced by our theoretical calculation. These results indicate the presence of Berry curvature hotspots and thus a large Berry curvature triplet at the oxide interface. Our theoretical calculations confirm the existence of large Berry curvatures from the avoided crossing of multiple 5d-orbit bands, orders of magnitude larger than that in transition-metal dichalcogenides. Nonlinear transport offers a new pathway to probe the Berry curvature at oxide interfaces and facilitates new applications in oxide nonlinear electronics.
ABSTRACT
Strongly correlated materials often exhibit an electronic phase separation (EPS) phenomena whose domain pattern is random in nature. The ability to control the spatial arrangement of the electronic phases at microscopic scales is highly desirable for tailoring their macroscopic properties and/or designing novel electronic devices. Here we report the formation of EPS nanoscale network in a mono-atomically stacked LaMnO3/CaMnO3/PrMnO3 superlattice grown on SrTiO3 (STO) (001) substrate, which is known to have an antiferromagnetic (AFM) insulating ground state. The EPS nano-network is a consequence of an internal strain relaxation triggered by the structural domain formation of the underlying STO substrate at low temperatures. The same nanoscale network pattern can be reproduced upon temperature cycling allowing us to employ different local imaging techniques to directly compare the magnetic and transport state of a single EPS domain. Our results confirm the one-to-one correspondence between ferromagnetic (AFM) to metallic (insulating) state in manganite. It also represents a significant step in a paradigm shift from passively characterizing EPS in strongly correlated systems to actively engaging in its manipulation.
ABSTRACT
Engineering Pt-free catalysts for hydrogen evolution reaction (HER) with high activity and stability is of great significance in electrochemical hydrogen production. Herein, in situ chemical H intercalation into ultrafine Pd to activate this otherwise HER-inferior material to form the ultrafine IrPdH hydride as an efficient and stable HER electrocatalyst is proposed. The formation of PdIrH depends on a new hydrogenation strategy via using ethanol as the hydrogen resource. It is demonstrated that H atoms in IrPdH originate from the OH and CH2  of ethanol, which fills the gap of ethanol as the hydrogen source for the preparation of Pd hydride. Thanks to the incorporation of H/Ir atoms and ultrafine structure, the IrPdH exhibits superior HER activity and stability in the whole pH range. The IrPdH delivers very low overpotentials of 14, 25 and 60 mV at a current density of 10 mA cm-2 respectively in 0.5 m H2 SO4 , 1 m KOH, and 1 m PBS electrolytes, which are much better than those of commercial Pt/C and most reported noble metal electrocatalysts. Theoretical calculations confirm that interstitial hydrogen availably refines the electronic density of Pd and Ir sites, which optimizes the adsorption of *H and leads to the significant enhancement of HER performance.
ABSTRACT
BACKGROUND: This study aimed to assess the fertility intentions of young people after the announcement of the three-child policy in China and to determine whether knowledge about reproductive, maternal, newborn, and child health (RMNCH) services or support, childbearing- and childbirth-related anxiety, and parenthood-related anxiety influence fertility intentions. METHODS: A cross-sectional Internet-based survey was conducted on a nationwide sample of young people aged 18 to 28 years old in education institutions. Factors associated with fertility intentions were analysed using partial least squares structural equation modelling (PLS-SEM). RESULTS: Only 4.2% of males and 1.7% of females intended to have three children or more. On the whole, the majority (40.3%) reported the intention to have two children. The mean and standard deviation (SD) for the total knowledge RMNCH support and/or services knowledge score was 9.5 (SD ± 8.9), out of a possible score of 39. The median and interquartile range (IQR) of childbearing- and childbirth-related anxiety score was 8.0 (IQR = 6.0-9.0), out of a possible score of 10. The median and IQR of parenthood-related anxiety score among the males was 6.0 (IQR = 4.0-9.0) and for females was 7.0 (IQR = 5.0-9.0). Results from PLS-SEM revealed that a higher level of knowledge of RMNCH support and/or services is significantly associated with higher fertility intentions. Both childbearing- and childbirth-related anxiety and parenthood-related anxiety were inversely associated with fertility intentions. CONCLUSION: Raising awareness about RMNCH supportive measures and easing birth- and parenting anxiety are imperative to enhance birth rates. Future policies should pay more attention to these determinants to achieve their intended goal of boosting population growth.
Subject(s)
Health Knowledge, Attitudes, Practice , Intention , Adolescent , Adult , China , Cross-Sectional Studies , Female , Fertility , Humans , Infant, Newborn , Male , Policy , Students , Universities , Young AdultABSTRACT
Oxide superlattices often exhibit emergent physical properties that are desirable for future information device applications. The most common growth technique for fabrication of oxide superlattices is pulsed laser deposition (PLD), which is convenient yet powerful for the growth of various oxide superlattices. However, the sample size prepared by PLD is rather small confined by the plasmon plume, which greatly limits its potential for device applications. Here, we design a PLD system that is capable of fabricating large-sized oxide superlattices with high uniformity. Specifically, during growth, the laser beam scans the target surface by combining the pitch and yaw angle rotation of the high reflective mirror and the linear motion of the focus lens. A SiC susceptor is placed in between the sample holder and the substrate to improve the large area infrared heating efficiency. Using such a system, droplet-free 10 × 10 mm2 [(LSMO)12/(PCMO)6]7 superlattices are epitaxially grown with the same period of superlattices across the whole sample areas. The high uniformity of the superlattices is further illustrated by near identical physical properties of all regions of the superlattice films. The present PLD system can be used to grow various kinds of oxide superlattices with the area size as large as 2 in., which is highly useful for device applications of oxides.
ABSTRACT
Electronic phase separation in complex oxides is the inhomogeneous spatial distribution of electronic phases, involving length scales much larger than those of structural defects or nonuniform distribution of chemical dopants. While experimental efforts focused on phase separation and established its correlation with nonlinear responses under external stimuli, it remains controversial whether phase separation requires quenched disorder for its realization. Early theory predicted that if perfectly "clean" samples could be grown, both phase separation and nonlinearities would be replaced by a bicritical-like phase diagram. Here, using a layer-by-layer superlattice growth technique we fabricate a fully chemically ordered "tricolor" manganite superlattice, and compare its properties with those of isovalent alloyed manganite films. Remarkably, the fully ordered manganite does not exhibit phase separation, while its presence is pronounced in the alloy. This suggests that chemical-doping-induced disorder is crucial to stabilize the potentially useful nonlinear responses of manganites, as theory predicted.
ABSTRACT
Tailoring molecular spinterface between novel magnetic materials and organic semiconductors offers promise to achieve high spin injection efficiency. Yet it has been challenging to achieve simultaneously a high and nonvolatile control of magnetoresistance effect in organic spintronic devices. To date, the largest magnetoresistance (~300% at T = 10 K) has been reached in tris-(8-hydroxyquinoline) aluminum (Alq3)-based organic spin valves (OSVs) using La0.67Sr0.33MnO3 as a magnetic electrode. Here we demonstrate that one type of perovskite manganites, i.e., a (La2/3Pr1/3)5/8Ca3/8MnO3 thin film with pronounced electronic phase separation (EPS), can be used in Alq3-based OSVs to achieve a large magnetoresistance (MR) up to 440% at T = 10 K and a typical electrical Hanle effect as the Hallmark of the spin injection. The contactless magnetic field-controlled EPS enables us to achieve a nonvolatile tunable MR response persisting up to 120 K. Our study suggests a new route to design high performance multifunctional OSV devices using electronic phase separated manganites.
ABSTRACT
Rational design and facile synthesis of two-dimensional (2D) materials still remain a great challenge. Herein, a facile process was proposed to construct 2D porous hybrid nanosheets, with ultrathin antimony nanoplates (with a thickness of ca. 0.5â¯nm) being anchored on acetone-derived graphene-like carbon porous nanosheets, by an aldol reaction and subsequent carbothermal reduction method using acetone and antimony acetate as the starting raw materials. The novel structural and compositional characteristics afford the 2D porous hybrid nanosheets with impressive boosting electrochemical sodium storage properties in terms of excellent cycling stability, high reversible specific capacity, and superior rate performance. The present work would provide significant value for the development of both synthetic methodology of 2D materials and their application as electrode active materials for energy storage and conversion.
ABSTRACT
HYPOTHESIS: Recently, molybdenum disulfide (MoS2) as a new type of catalyst, has been used for hydrogen evolution. In order to overcome the shortcomings of MoS2, such as poor conductivity and lack of catalytic activity sites, various materials were added to prepare composites, such as graphene with good conductivity. EXPERIMENTS: In this work, we combined MoS2 with graphene through a very simple liquid-phase salt-assisted co-exfoliation method. The obtained MoS2/graphene nano-composites have been further applied to electrocatalyst of hydrogen evolution reaction. The influences of different ratio of MoS2 to graphene and different solvents of exfoliation on the electrocatalytic activity for the hydrogen evolution reaction have been investigated in detail. FINDINGS: In general, the obtained MoS2/graphene nano-catalysts exhibits the smallest Tafel slope of 61â¯mV/dec with the exfoliation solvent of isopropanol, and 65â¯mV/dec in N-methyl pyrrolidone. All the MoS2/graphene composites exhibit much better catalytic activity than either MoS2 or graphene single substance due to the synergetic effect between MoS2 and graphene nanosheets.
ABSTRACT
Characterization of the onset of a phase transition is often challenging due to the fluctuations of the correlation length scales of the order parameters. This is especially true for second-order structural-phase transition due to minute changes involved in the relevant lattice constants. A classic example is the cubic-to-tetragonal second-order phase transition in SrTiO3 (STO), which is so subtle that it is still unresolved. Here, we demonstrate an approach to resolve this issue by epitaxially grown rhombohedral La0.7Sr0.3MnO3 (LSMO) thin films on the cubic STO (100) substrate. The shear strain induced nanotwinning waves in the LSMO film are extremely sensitive to the cubic-to-tetragonal structural-phase transitions of the STO substrate. Upon cooling from room temperature, the development of the nanotwinning waves is spatially inhomogeneous. Untwinned, atomically flat domains, ranging in size from 100 to 300 nm, start to appear randomly in the twinned phase between 265 and 175 K. At â¼139 K, the untwinned, atomically flat domains start to grow rapidly into micrometer scale and finally become dominant at â¼108 K. These results indicate that the low-temperature tetragonal precursor phase of STO has already nucleated at 265 K, significantly higher than the critical temperature of STO (â¼105 K). Our work paves a pathway to visualize the onset stages of structural-phase transitions that are too subtle to be observed using direct-imaging methods.
ABSTRACT
Herein, we designed and constructed a dual functional surface with antimicrobial and antifouling abilities to prevent protein and bacterial attachment that are significant challenges in biomedical devices. Primary amino-group-capped sulfobetaine of DMMSA was synthesized and then grafted onto polydopamine pretreated PET sheets via click chemistry. The sheets were subsequently immersed into silver ion solution, in which the absorbed silver ions were reduced to silver nanoparticles (AgNPs) in situ by a polydopamine layer. The antifouling assays demonstrated that the resultant PET/DMMSA/AgNPs sheets exhibited great antifouling performances against bovine serum albumin (BSA), bovine fibrinogen (BFG), platelets, and bacteria, the critical proteins/microorganisms leading to implant failure. The antibacterial data suggested that the sheets had dual functions as inhibitors of bacterial growth and bactericide and could efficiently delay the biofilm formation. This repelling and killing approach is green and simple, with potential biomedical applications.
Subject(s)
Anti-Bacterial Agents/pharmacology , Biofouling/prevention & control , Metal Nanoparticles/chemistry , Polyethylene Terephthalates/chemistry , Silver/pharmacology , Adsorption/drug effects , Animals , Anti-Bacterial Agents/chemistry , Anti-Bacterial Agents/toxicity , Bacterial Adhesion/drug effects , Betaine/analogs & derivatives , Betaine/chemical synthesis , Betaine/chemistry , Betaine/toxicity , Biofilms/drug effects , Cattle , Escherichia coli/physiology , Fibrinogen/chemistry , Hemolysis/drug effects , Indoles/chemical synthesis , Indoles/chemistry , Indoles/toxicity , Metal Nanoparticles/toxicity , Mice , Platelet Adhesiveness/drug effects , Polyethylene Terephthalates/toxicity , Polymers/chemical synthesis , Polymers/chemistry , Polymers/toxicity , Rabbits , Serum Albumin, Bovine/chemistry , Silver/chemistry , Silver/toxicity , Staphylococcus aureus/drug effectsABSTRACT
At ultrafast timescales, the initial and final states of a first-order metal-insulator transition often coexist forming clusters of the two phases. Here, we report an unexpected third long-lived intermediate state emerging at the photoinduced first-order metal-insulator transition of La_{0.325}Pr_{0.3}Ca_{0.375}MnO_{3}, known to display submicrometer length-scale phase separation. Using magnetic force microscopy and time-dependent magneto-optical Kerr effect, we determined that the third state is a nanoscale mixture of the competing ferromagnetic metallic and charge-ordered insulating phases, with its own physical properties. This discovery bridges the two different families of colossal magnetoresistant manganites known experimentally and shows for the first time that the associated states predicted by theory can coexist in a single sample.
ABSTRACT
Here, we report a facile salt-assisted direct liquid-phase exfoliation method for mass production of MoS2 nanosheets. We choose organic solvent isopropanol (IPA) as exfoliation media and potassium ferrocyanide, potassium sodium tartrate, or sodium tartrate as salt, the assistant. The selected salts show universal and efficient assistant effect for the exfoliation of MoS2 in IPA. Especially, potassium ferrocyanide (K4Fe(CN)6) can enhance the exfoliation efficiency up to 73 times and a dispersion of MoS2 nanosheets with concentration as high as 0.240â¯mgâ¯mL-1 can be easily obtained in IPA-K4Fe(CN)6 system. Transmission electron microscopy, atomic force microscopy (AFM), and Raman spectroscopy show that bulk MoS2 has been successfully exfoliated into mono- to few-layer MoS2 nanosheets. AFM analysis indicates that nearly 60% flakes are monolayer in MoS2 dispersion.
ABSTRACT
High quality pristine graphene (PG) dispersions are prepared conveniently via an organic salts assisted exfoliation method in a green, non-toxic, cheap and low boiling point solvent: ethanol. The PG is characterized by transmission electron microscopy and atomic force microscopy. Furthermore, the PG is used as an electrode material for fabrication of nonenzymatic sensor of hydrogen peroxide (H2O2). This nonenzymatic sensor shows enhanced electrocatalytic activity towards H2O2 and displays two linear ranges from 2.0 to 37.0µM and 37.0 to 437.0µM with a detection limit of 0.19µM (S/N=3), which is comparable to those electrochemical sensors based on metal oxide or noble metal/graphene composites.
ABSTRACT
The pristine graphene can be easily prepared in isopropanol-water mixture with salts as assistant via liquid-phase exfoliation method. The concentration of graphene dispersion reaches as high as 0.565â¯mg/mL. The graphene film prepared by drop-casting method shows an excellent electrical conductivity (7.095â¯×â¯104â¯S/m). Furthermore, an electrochemical biosensor based on the pristine graphene shows high selectivity and sensitivity for the determination of dopamine. The linear detection range for dopamine is 2.5-1500⯵M with detection limit of 1.5⯵M. This method provides a potential process for preparing high-quality graphene ready-to-use in low-boiling point solvent.
Subject(s)
Biosensing Techniques/methods , Dopamine/analysis , Graphite/chemistry , Graphite/isolation & purification , Liquid-Liquid Extraction , Electrochemistry , Limit of Detection , SolventsABSTRACT
BACKGROUND: We aimed to evaluate the diagnostic performance of 99mTc-MIBI SPECT/CT and ultrasonography in patients with secondary hyperparathyroidism (SHPT), and explored the factors that affect the diagnostic performance. METHODS: 99mTc-MIBI SPECT/CT and ultrasonography were performed in 50 patients with SHPT within 1 month before they underwent surgery. Imaging results were confirmed by the pathology. Pearson correlation analysis was used to determine the correlation of PTH level with clinical data. The optimal cutoff value for predicting positive 99mTc-MIBI results was evaluated by ROC analysis in lesions diameter. RESULTS: Forty-nine patients had a positive 99mTc-MIBI imaging results and 39 patients had positive ultrasonography results. The sensitivities of 99mTc-MIBI and ultrasonography were 98.00% and 78.00%, respectively. A total of 199 lesions were resected in 50 patients. Among them, 183 lesions were proved to be parathyroid hyperplasia. On per-lesion basis analysis, the sensitivity and specificity of 99mTc-MIBI and ultrasonography were 59.34% and 75.00% vs 46.24% and 80.00%, respectively. The Pearson correlation analysis showed that the serum AKP and PTH level had a significant linear association (r = 0.699, P < 0.001). The lesion diameter was a statistically significant predictive factor in predicting positive 99mTc-MIBI SPECT/CT. The optimal cutoff value for predicting positive 99mTc-MIBI results evaluated by ROC analysis in lesions diameter was 8.05 mm. CONCLUSION: Dual phase 99mTc-MIBI SPECT/CT imaging had a higher sensitivity in patients with SHPT than ultrasonography. Therefore, using 99mTc-MIBI positioning the lesion could be an effective method pre-surgical in patients with SHPT.
Subject(s)
Hyperparathyroidism, Secondary/diagnostic imaging , Hyperparathyroidism, Secondary/surgery , Parathyroid Glands/pathology , Tomography, Emission-Computed, Single-Photon/methods , Adult , Female , Humans , Hyperparathyroidism, Secondary/metabolism , Hyperparathyroidism, Secondary/pathology , Hyperplasia , Male , Middle Aged , Organotechnetium Compounds/metabolism , Parathyroid Glands/surgery , ROC Curve , Sensitivity and Specificity , UltrasonographyABSTRACT
Colloidal cellulose nanocrystals were LBL deposited to form firmly-stacked optical coatings in which the nanorods regulated their head-to-tail association and aligned in the axial-centrifuged direction. The periodically transition from blue to orange of reflected colors was tunable via deposition layer adjustment. While the sensing coating was exposed to vapors of NH3.H2O, H2O, HCl and HAc, respectively, the color variation in the response process was irreversible at room temperature and highly dependent on vapor diffusion and chemical interface interaction. Consequently, HAc vapor presented the longest sensing transition of wavelength, whereas the alkaline NH3.H2O displays a less recovery ratio than HAc and H2O at room temperature. Under heating at 50°C, the sensed coatings could mostly be restored to their original state except HCl-etched one. Therefore, the naked-eyed qualitative detectability of vapors by nanocellulose could be realized by the divergence in color shift which is of great importance in chemical sensors.
ABSTRACT
BACKGROUND: Rehabilitation, which is essential for amputees with myoelectric hands, can improve the quality of daily life by remodeling the neuron network. In our study, we aim to develop a cerebral blood perfusion (CBF) single-photon emission computed tomography computer-aided (SPECT-CA) detection scheme to automatically locate the brain's activated regions after rehabilitation. RESULTS: Five participants without forearms (three male, two female, mean age 51 ± 12.89 years, two missing the right side, and three missing the left side) were included in our study. In the clinical assessment, all of the participants received higher scores after training. The results of the SPM analysis indicated that CBF in the precentral gyrus, postcentral gyrus, frontal lobe, temporal lobe and cerebellum was significantly different among the five participants (P < 0.05). Moreover, SPECT-CA showed that the activated brain areas mainly included the precentral gyrus, postcentral gyrus, cerebellum and extensive cerebral cortex. CONCLUSION: Our study demonstrated that the CBF SPECT-CA method can detect the brain blood perfusion changes induced by rehabilitation with high sensitivity and accuracy. This method has great potential for locating the remodeled neuron regions of amputees with myoelectric hands after rehabilitation.
Subject(s)
Amputees/rehabilitation , Artificial Limbs , Brain/diagnostic imaging , Brain/physiopathology , Cerebrovascular Circulation , Single Photon Emission Computed Tomography Computed Tomography , Activities of Daily Living , Adult , Aged , Biofeedback, Psychology , Electromyography , Electronic Data Processing , Female , Hand , Humans , Male , Middle Aged , Neuronal Plasticity , Single Photon Emission Computed Tomography Computed Tomography/methods , Treatment OutcomeABSTRACT
In complex oxides systems such as manganites, electronic phase separation (EPS), a consequence of strong electronic correlations, dictates the exotic electrical and magnetic properties of these materials. A fundamental yet unresolved issue is how EPS responds to spatial confinement; will EPS just scale with size of an object, or will the one of the phases be pinned? Understanding this behavior is critical for future oxides electronics and spintronics because scaling down of the system is unavoidable for these applications. In this work, we use La0.325Pr0.3Ca0.375MnO3 (LPCMO) single crystalline disks to study the effect of spatial confinement on EPS. The EPS state featuring coexistence of ferromagnetic metallic and charge order insulating phases appears to be the low-temperature ground state in bulk, thin films, and large disks, a previously unidentified ground state (i.e., a single ferromagnetic phase state emerges in smaller disks). The critical size is between 500 nm and 800 nm, which is similar to the characteristic length scale of EPS in the LPCMO system. The ability to create a pure ferromagnetic phase in manganite nanodisks is highly desirable for spintronic applications.