Boosting the Curie temperature of GaN monolayer through van der Waals heterostructures.

The pursuit of van der Waals (vdW) heterostructures with high Curie temperature and strong perpendicular magnetic anisotropy (PMA) is vital to the advancement of next generation spintronic devices. First-principles calculations are used to study the electronic structures and magnetic characteristics of GaN/VS2vdW heterostructure under biaxial strain and electrostatic doping. Our findings show that a ferromagnetic ground state with a remarkable Curie temperature (477 K), much above room temperature, exists in GaN/VS2vdW heterostructure and 100% spin polarization efficiency. Additionally, GaN/VS2vdW heterostructure still maintains PMA under biaxial strain, which is indispensable for high-density information storage. We further explore the electron, magnetic, and transport properties of VS2/GaN/VS2vdW sandwich heterostructure, where the magnetoresistivity can reach as high as 40%. Our research indicates that the heterostructure constructed by combining the ferromagnet VS2and the non-magnetic semiconductor GaN is a promising material for vdW spin valve devices at room temperature.

[Mechanism about LMP1 of EB Virus Promoting Plasma Blast Differentiation of DLBCL Cell via mTORC1].

OBJECTIVE: To investigate possible mechanism on protien LMP1 expressed by EBV inducing plasmablast differentiation of DLBCL cell via the mTORC1 pathway. METHODS: The expression levels of LMP1 protein, CD38 and the phosphorylation levels of p70S6K in EBV+ and EBV- DLBCL cell lines were detected by Western blot. Cell lines overexpressing LMP1 gene stablely were constructed and LMP1 gene was silenced by RNAi. The expression of LMP1 gene was verified by RT-qPCR. The expression levels of LMP1 and CD38 and the phosphorylation levels of p70S6K in each group were detected by Western blot. RESULTS: Compared with EBV-DLBCL cells, the expression of LMP1 was detected on EBV +DLBCL cells (P =0.0008), EBV +DLBCL cells had higher phosphorylation levels of p70S6K (P =0.0072) and expression levels of CD38(P =0.0091). Compared with vector group, the cells of LMP1OE group had higher expression levels of LMP1 and CD38 (P =0.0353; P <0.0001), meanwhile molecular p70S6K was phosphorylated much more(P =0.0065); expression of LMP1 mRNA was verified(P <0.0001). Compared with si-NC group, expression level of LMP1 protein(P =0.0129) was not detected and phosphorylated p70S6K disappeared of LMP1KO group (P =0.0228); meanwhile, expression of CD38 decreased,although there was no significant difference (P =0.2377). CONCLUSION: LMP1 promotes DLBCL cells plasmablast differentiation via activating mTORC1 signal pathway.

Tuning [VO6] Octahedron of Ammonium Vanadates via F Incorporation for High-Performance Aqueous Zinc Ion Batteries.

The electrochemical properties of vanadium-based materials as cathode materials for aqueous zinc ion batteries are still restricted by low conductivity, sluggish reaction kinetics, and poor structural stability. Herein, the [VO6] octahedron, as the basic unit of vanadium-oxide layer of ammonium vanadates (NH4V4O10, denoted as NVO), is incorporated by F atoms to regulate the coordinated environment of vanadium. Density functional theory (DFT) calculations and experimental results show that both physicochemical and electrochemical properties of NVO are improved by F-doping. The enhanced electronic conductivity accelerates the electron transfer and the expanded interlayer spacing expedites the diffusion kinetics of zinc ions. As a result, the F-doped NVO (F-NVO) electrode shows a high discharge capacity (465 mAh g-1 at 0.1 A g-1), good rate capability (260 mAh g-1 at 5 A g-1), and long-term cycling stability (88% capacity retention over 2000 cycles at 4 A g-1). The reaction kinetics and energy storage mechanism of F-NVO are further validated by in situ and ex situ characterizations.

A covalency-aided electrochemical mechanism for CO2 reduction: the synergistic effect of copper and boron dual active sites drives the formation of a high-efficiency ethanol product.

Electrocatalytic carbon dioxide (CO2) conversion into high-value multi-carbon products is of great significance for CO2 utilization, but the chemical inertness, low yields, and poor product selectivity hinder the application prospects of the electrocatalytic conversion methods. In this work, a covalency-aided electrochemical mechanism for CO2 reduction is proposed for the first time by embedding the nonmetallic element boron (B) on copper surfaces, in which p-block dopants have a significant impact on modifying the adsorbent intermediates and improving the catalytic activity. Herein, B atoms not only provide empty and occupied orbitals to adsorb and activate CO, but also afford a large amount of charge to stabilize the C2 intermediates. In addition, B atoms can also adjust the oxidation state of nearby copper (namely, Cu+), and the synergistic Cu+ and B dual active sites act as O* adsorption and C* adsorption sites, respectively, leading to strong adsorption and activation of CO2. First-principles calculations reveal that CO2 can be reduced into C2H5OH with an ultralow potential of -0.26 V. Overall, this study provides new insights into CO2 reduction, which offers a promising way for achieving an efficient ethanol product.

Sodium-Ion Substituted Water Molecule in Layered Vanadyl Phosphate Enhancing Electrochemical Kinetics and Stability of Zinc Ion Storage.

Vanadyl phosphate (VOPO4 ·2H2 O) has been regarded as one of the most promising cathode materials for aqueous Zn-ion batteries due to its distinct layered structure. However, VOPO4 ·2H2 O has not yet demonstrated the exceptional Zn ion storage performance owing to the structural deterioration during repeated charging/discharging process and poor intrinsic conductivity. In this work, 2D sodium vanadyl phosphate (NaVOPO4 ·0.83H2 O, denoted as NaVOP) is designed as a cathode material for Zn-ion batteries, in which sodium ions are preinserted into the interlayer, replacing part of water. Benefiting from the in situ surface oxidization, improved electronic conductivity, and increased hydrophobicity, the NaVOP electrode exhibits a high discharge capacity of 187 mAh g-1 at 0.1 A g-1 after activation, excellent rate capability and enhanced cycling performance with 85% capacity retention after 1500 cycles at 1 A g-1 . The energy storage mechanism of the NaVOP nanoflakes based on the rapid Zn2+ and H+ intercalation pseudocapacitance are investigated via multiple ex situ characterizations.

Memristors Based on an Iridium(III) Complex Containing Viologen for Advanced Synaptic Bionics.

Memristors with nonvolatile memory properties are expected to open the era of neuromorphic computing. However, it remains a huge challenge to develop memristors with high uniformity, high stability, and low power consumption for advanced synaptic bionics. Herein, an electroactive iridium(III) complex Ir-vio was designed and synthesized by incorporating a viologen moiety into its N∧N ligand. Complex Ir-vio showed multiple redox states and high sensitivity to an electrical stimulus. Importantly, two-terminal memristors with Ag/Ir-vio/W structure were successfully fabricated by the solution-processable method, which exhibited multilevel storage characteristics with a low switching threshold voltage of 0.5 V and high ON1/ON2/ON3/OFF current ratio of 105/103/102/1 at a low reading bias of 0.05 V. Moreover, the memristors can mimic synaptic plasticity, indicating that they can act as artificial synapses to construct brain-inspired neural networks. The memristive mechanisms can be ascribed to the interconversion among different charge-transfer and redox states under various electrical stimulus. To the best of our knowledge, this work is the first experimental demonstration of memristors based on iridium(III) complexes, opening a new era for the development of synaptic bionic devices based on organometallic compounds.

Circularly polarized luminescence from organic micro-/nano-structures.

Circularly polarized light exhibits promising applications in future displays and photonic technologies. Circularly polarized luminescence (CPL) from chiral luminophores is an ideal approach to directly generating circularly polarized light, in which the energy loss induced by the circularly polarized filters can be reduced. Among various chiral luminophores, organic micro-/nano-structures have attracted increasing attention owing to the high quantum efficiency and luminescence dissymmetry factor. Herein, the recent progress of CPL from organic micro-/nano-structures is summarized. Firstly, the design principles of CPL-active organic micro-/nano-structures are expounded from the construction of micro-/nano-structure and the introduction of chirality. Based on these design principles, several typical organic micro-/nano-structures with CPL activity are introduced in detail, including self-assembly of small molecules, self-assembly of π-conjugated polymers, and self-assembly on micro-/nanoscale architectures. Subsequently, we discuss the external stimuli that can regulate CPL performance, including solvents, pH value, metal ions, mechanical force, and temperature. We also summarize the applications of CPL-active materials in organic light-emitting diodes, optical information processing, and chemical and biological sensing. Finally, the current challenges and prospects in this emerging field are presented. It is expected that this review will provide a guide for the design of excellent CPL-active materials.

Poly(Acrylic Acid)-Modified MoS2 Nanoparticle-Based Transdermal Delivery of Atenolol.

INTRODUCTION: Hypertension is a major health problem worldwide and is typically treated using oral drugs. However, the frequency of oral administration may result in poor patient compliance, and reduced bioavailability owing to the first-pass effect can also prove problematic. METHODS: In this study, we developed a new transdermal-drug-delivery system (TDDS) for the treatment of hypertension using atenolol (ATE) based on poly(acrylic acid) (PAA)-decorated three-dimensional (3D) flower-like MoS2 nanoparticles (PAA-MoS2 NPs) that respond to NIR laser irradiation. The PAA-modified MoS2 NPs were synthesized and characterized using attenuated total reflection Fourier-transform infrared spectroscopy, X-ray diffraction measurements, scanning electron microscopy, transmission electron microscopy, dynamic light scattering, and the sedimentation equilibrium method. The drug-loading efficiency and photothermal conversion effect were also explored. RESULTS: The results showed that the colloidally stable PAA-MoS2 NPs exhibited a high drug-loading capacity of 54.99% and high photothermal conversion ability. Further, the capacity of the PAA-MoS2 NPs for controlled release was explored using in vitro drug-release and skin-penetration studies. The drug-release percentage was 44.72 ± 1.04%, and skin penetration was enhanced by a factor of 1.85 in the laser-stimulated group. Sustained and controlled release by the developed TDDS were observed with laser stimulation. Moreover, in vivo erythema index analysis verified that the PAA-MoS2 NPs did not cause skin irritation. DISCUSSION: Our findings demonstrate that PAA-MoS2 NPs can be used as a new carrier for transdermal drug delivery for the first time.

Functionalized MoS2-nanoparticles for transdermal drug delivery of atenolol.

Molybdenum disulfide (MoS2) has excellent photothermal conversion abilities, an ultra-high specific surface area, and has been extensively explored for use in biomedicine. However, the high toxicity associated with MoS2 has limited its biological applications for in vivo photothermal therapy and drug delivery systems. Herein, we have developed cationic hydroxyethyl cellulose (JR400) surface-modified MoS2 nanoparticles (NPs) that are responsive to near-infrared (NIR) laser irradiation as a transdermal drug delivery system (TDDS). Herein, we confirmed the preparation of hexagonal phase MoS2 with robust surface modification with JR400. The flower-like morphology of the NPs had an average diameter of 355 ± 69.3 nm limiting the absorption of the NPs through the stratum corneum. With the ability to efficiently load 90.4 ± 0.3% of the model drug atenolol (ATE), where 1 g of JR400-MoS2 NPs was able to load 3.6 g ATE, we assayed the controlled release capacity in vitro skin penetration studies. These JR400-MoS2 NPs showed further enhancement under NIR stimulation, with a 2.3-fold increase in ATE skin penetration. Furthermore, we verified in vivo that these JR400-MoS2 NPs do not cause skin irritation suggesting that they are promising new TDDS candidates for small molecule drugs.

Electroluminochromic Materials and Devices Based on Metal Complexes.

Electroluminochromism (ELC) refers to an interesting phenomenon exhibited by a material whose luminescent properties can be reversibly modulated under an electrical stimulus. Such a luminescence-switching property has been widely used in various organic optoelectronic devices because it can simultaneously detect electrical and optical signals. Metal complexes are the promising candidates for ELC materials due to their sensitivity to an electrical stimulus. Herein, recent progress on electroluminochromic materials and devices based on various metal complexes has been summarized. Meanwhile, the applications of these complexes in data recording and security protection have also been discussed. Finally, a brief conclusion and outlook are presented, pointing out that the development of electroluminochromic metal complexes with excellent performance is important because they play a vital role in future intelligent optoelectronic devices.