State of art of micronuclei assay in exfoliative cytology as a clinical biomarker of genetic damage in oral carcinogenesis: A systematic review and meta-analysis.

Oral squamous cell carcinoma (OSCC) is the most common oral malignancy, often preceded by oral potentially malignant disorders (OPMDs). Currently, no clinical biomarker exists to predict malignancy, necessitating OPMD follow-up. Habits and environmental factors, such as smoking, and alcohol consumption, influence OSCC onset. Increased micronuclei (MNs) formation has been observed in the development of OSCC. Non-invasive diagnostic tests like exfoliative cytology offer painless and regular monitoring options. This study evaluates the impact of tobacco, alcohol, and pesticide exposure on MNs occurrence in exfoliative cytology-collected oral mucosal cells, assessing their potential as non-invasive biomarker for OSCC development prediction and monitoring in high-risk patients. Despite results from this meta-analysis supporting the existence of a stepwise increase from controls to patients with OPMD to OSCC, the translation of these findings into clinical practice is limited due to intra- and inter-individual heterogeneity, as well as methodological variability in MNs quantification. Various factors contribute to this heterogeneity, including demographic variables, methodological variability of different laboratories, staining techniques, sample collection location, and patient characteristics. All these points were discussed to provide further insights and improve standardization for future studies.

Diamond-Like Carbon Coating Reduces Connection Screw Head Stripping After Multiple Tightening Instances.

The stability of implant-abutment joint is fundamental for the long-term success of implant rehabilitation. The screw loosening, fracture, and head deformation are among the most common mechanical complications. Several surface treatments of titanium screws have been proposed to improve their resistance and stability. Diamond-like carbon (DLC) coating of the materials is widely used to increase their wear resistance and durability. The present study aimed to evaluate the effect of carbon fiber coating on the screw head on screw removal torque and screw head stripping. One hundred titanium implant screws were used, 50 without coating (Group 1) and 50 with DLC coating of the screw head (Group 2). Each screw was tightened with a torque of 25 Ncm and unscrewed 10 times. The removal torque was measured with a digital cap torque tester for each loosening. Optical 3d measurement of the screw head surface was performed by a fully automatic machine before and after multiple tightening to investigate surface modifications. The reverse torque values decreased with repeated tightening and loosening cycles in both groups without significant differences (P > .05). Optical measurements of surface dimensions revealed average changes of 0.0357 mm in Group 1 and 0.02312 mm in Group 2, which resulted to be statistically significant (P < .001). The DLC coating of the retention screw head can prevent its distortion and wear, especially after multiple tightening.

Inter and intra-operator reliability of Lekholm and Zarb classification and proposal of a novel radiomic data-driven clustering for qualitative assessment of edentulous alveolar ridges.

OBJECTIVES: The present study was conducted to evaluate the reproducibility of Lekholm and Zarb classification system (L&Z) for bone quality assessment of edentulous alveolar ridges and to investigate the potential of a data-driven approach for bone quality classification. MATERIALS AND METHODS: Twenty-six expert clinicians were asked to classify 110 CBCT cross-sections according to L&Z classification (T0). The same evaluation was repeated after one month with the images put in a different order (T1). Intra- and inter-examiner agreement analyses were performed using Cohen's kappa coefficient (CK) and Fleiss' kappa coefficient (FK), respectively. Additionally, radiomic features extraction was performed from 3D edentulous ridge blocks derived from the same 110 CBCTs, and unsupervised clustering using 3 different clustering methods was used to identify patterns in the obtained data. RESULTS: Intra-examiner agreement between T0 and T1 was weak (CK 0.515). Inter-examiner agreement at both time points was minimal (FK at T0: 0.273; FK at T1: 0.243). The three different unsupervised clustering methods based on radiomic features aggregated the 110 CBCTs in three groups in the same way. CONCLUSIONS: The results showed low agreement among clinicians when using L&Z classification, indicating that the system may not be as reliable as previously thought. The present study suggests the possible application of a reproducible data-driven approach based on radiomics for the classification of edentulous alveolar ridges, with potential implications for improving clinical outcomes. Further research is needed to determine the clinical significance of these findings and to develop more standardized and accurate methods for assessing bone quality of edentulous alveolar ridges.

Dietary Polyphenols against Oxidative Stress in Head and Neck Cancer: What's New, What's Next.

Head and neck cancers (HNC) are a worldwide health problem, accounting for over 5% of all types of cancers. Their varied nature makes it sometimes difficult to find clear explanations for the molecular mechanisms that underline their onset and development. While chemio- and radiotherapy are clearly not to be dismissed, we cannot undervalue the effect that polyphenols - especially dietary polyphenols - can have in helping us to cope with this medical emergency. By influencing several different proteins involved in numerous different metabolic pathways, polyphenols can have a broad spectrum of biological action and can hopefully act synergistically to tackle down head and neck cancer. Moreover, being natural molecules, polyphenols does not present any side effects and can even enhance drugs efficacy, making our clinical therapy against head and neck cancer more and more effective. Certainly, oxidative stress plays an important role, altering several molecular pathways, lowering the body's defenses, and ultimately helping to create a microenvironment conducive to the appearance and development of the tumor. In this regard, the regular and constant intake of foods rich in polyphenols can help counteract the onset of oxidative stress, improving the health of the general population. In this review, we highlight the role of polyphenols in managing oxidative stress, with such positive effects that they can be considered new tools to use in our anti-head and neck cancer strategy.

Prosthesis Emergence Angle Influences Marginal Bone Level for External Connection Implants: A Cross-Sectional Study.

PURPOSE: To retrospectively evaluate the influence of prosthetic features on marginal bone level changes around bone-level implants with an external hex connection. MATERIALS AND METHODS: A total of 100 patients with 166 implants and cemented crowns were included. Demographic and clinical data were collected. Prosthetic features were radiographically evaluated, including emergence angle (EA), emergence profile (EP), crown-implant ratio (CIR), and abutment height. Marginal bone levels were measured on intraoral radiographs taken at baseline and after at least 1 year. The correlation between prosthetic features and marginal bone loss (MBL) was then investigated. RESULTS: The mean follow-up time was 43.94 months. Implant length varied between 5 and 13 mm. The mean height of the abutments used was 1.55 mm. EA measured an average 30.62 degrees (± 13.20) mesially and 29.45 degrees (± 13.07) distally. The CIR was 0.99 (± 0.26). The mean MBL was 0.19 mm on the mesial side and 0.20 mm on distal side of the implants. Significant positive associations emerged between MBL and implant length (P < .005) and with EA (P < .05). A convex profile of the crown was shown to be associated with a higher distal MBL (P = .025) compared to concave and straight profiles.

The Immune Cells in the Development of Oral Squamous Cell Carcinoma.

A still unresolved issue surrounding tumor formation concerns the role that the immune system plays in preventing the formation and progression of neoplasia, including oral squamous cell carcinoma (OSCC). Antitumor immunity has historically been seen as a critical barrier for cancer cells to develop, grow and spread, and this can be modulated using immunotherapies to achieve antitumor clinical responses. However, it has recently become clear that tumor-associated immunity, particularly the inflammatory microenvironment, has the paradoxical effect of enhancing tumorigenesis and progression. In this review, we discuss the multifaceted function of infiltrating immune cells in suppressing or promoting premalignancy and cancer. In particular, we report on the evidence supporting a role for T lymphocytes, dendritic cells, macrophages, and neutrophils in the development and progression of oral potentially malignant disorders (OPMD) and OSCC. We also draw attention to the clinical relevance of immune cell phenotypes and associated molecules for use as biomarkers and to the translatability of current research findings to improve classification systems and precision medicine in patients with OSCC.

High-risk TP53 mutations predict poor primary treatment response of patients with head and neck squamous cell carcinoma.

OBJECTIVES: Head and neck squamous cell carcinoma (HNSCC) poses a diagnostic and therapeutic challenge worldwide and is associated with a poor survival rate. Due to the variability in the efficacy of treatments for HNSCC, new predictive biomarkers of therapy outcomes are needed. Recently, we developed an algorithm that employs the mutational profile of TP53 as an independent prognostic factor in HNSCC. In this study, we investigated its role as a predictive biomarker of treatment outcomes in HNSCC patients. We also tested the usefulness of two classification systems for TP53 mutational landscapes. MATERIALS AND METHODS: Clinical and genomic data were retrieved from The Cancer Genome Atlas database. We built a multivariate stepwise backward binary regression model to assess the role of TP53 mutations in predicting therapeutic outcomes. RESULTS: Cases harbouring high-risk-of-death mutations reported an odds ratio of 3.301 for stable or progressive disease compared to wild-type cases, while no significant difference in treatment outcomes was found between cases with low-risk-of-death mutations and wild-type TP53. Our analysis found that older patients with a history of alcohol consumption had a higher risk of stable/progressive disease. CONCLUSIONS: This study improves current evidence on the role of TP53 mutations in treatment response in HNSCC patients.

CAD/CAM Abutments in the Esthetic Zone: A Systematic Review and Meta-Analysis of Soft Tissue Stability.

Computer-aided design and computer-aided manufacturing customized abutments are increasingly used in everyday clinical practice. Nevertheless, solid scientific evidence is currently lacking regarding their potential advantages in terms of soft tissue stability. The main aim of this systematic review and meta-analysis was to compare the soft tissue outcomes of prefabricated versus customized (CAD/CAM) abutments. The present review was registered with PROSPERO (CRD42020161875) and the protocol was developed according to the PRISMA statement. An electronic search was performed on three databases (PubMed, Embase and Cochrane Central) up to May 2023. Data extraction was followed by qualitative and quantitative analysis of the included studies. Three randomized controlled clinical trials and three controlled clinical trials (number of patients = 230; number of dental implants = 230) with a follow-up of between 12 and 36 months were included. No significant differences were observed between prefabricated versus customized (CAD/CAM) abutments regarding midfacial mucosal recession, interproximal papillae and pink aesthetic score (PES) after 12 months. Conclusion: The potential benefits of CAD/CAM abutments on soft tissues should be better clarified in future investigations. The usage of customized CAD/CAM abutments in everyday clinical practice should be based on a careful case-by-case evaluation (CRD42020161875).

Impact of Circulating Cell-Free DNA (cfDNA) as a Biomarker of the Development and Evolution of Periodontitis.

In the last few decades, circulating cell-free DNA (cfDNA) has been shown to have an important role in cell apoptosis or necrosis, including in the development and evolution of several tumors and inflammatory diseases in humans. In this regard, periodontitis, a chronic inflammatory disease that can induce the destruction of supporting components of the teeth, could represent a chronic inflammatory stimulus linked to a various range of systemic inflammatory diseases. Recently, a possible correlation between periodontal disease and cfDNA has been shown, representing new important diagnostic-therapeutic perspectives. During the development of periodontitis, cfDNA is released in biological fluids such as blood, saliva, urine and other body fluids and represents an important index of inflammation. Due to the possibility of withdrawing some of these liquids in a non-invasive way, cfDNA could be used as a possible biomarker for periodontal disease. In addition, discovering a proportional relationship between cfDNA levels and the severity of periodontitis, expressed through the disease extent, could open the prospect of using cfDNA as a possible therapeutic target. The aim of this article is to report what researchers have discovered in recent years about circulating cfDNA in the development, evolution and therapy of periodontitis. The analyzed literature review shows that cfDNA has considerable potential as a diagnostic, therapeutic biomarker and therapeutic target in periodontal disease; however, further studies are needed for cfDNA to be used in clinical practice.

Adjunctive use of locally delivered host-modulators in intra-bony defects as part of step 2 periodontal therapy: systematic review, meta-analysis and trial sequential analysis.

BACKGROUND: This systematic review and meta-analysis aimed at investigate the role of locally delivered host-modulators in combination with step 2 of periodontal therapy in reducing probing pocket depth, improving clinical attachment level and reducing bone defect depth in intra-bony defects. HIGHLIGHT: RCT with at least 6 months follow-up were included in this study. Risk of bias assessment was performed with Cochrane collaboration tool and Grade GRADEpro. In addition, meta-analysis and trial sequential analysis were used to aggregate the available evidence. 22 studies met the inclusion criteria and were included in this systematic review. At 6 months locally delivered host-modulators significantly improved PD and CAL and bone defect depth. CONCLUSION: Considering the emerging role of host-inflammatory response in the treatment of periodontitis, several studies are exploring the role of locally delivered host modulators as an adjunct to step 2 of periodontal therapy.

Immediate loading full-arch rehabilitation using transmucosal tissue-level implants with different variables associated: a one-year observational study.

BACKGROUND: The aim of the present observational study was to investigate the application of transmucosal tissue-level implants in immediate loading full-arch rehabilitation with different variables associated. METHODS: Patients needing a full-arch implant rehabilitation were recruited and rehabilitated with four transmucosal tissue level implants. Data related to implants' diameters and lengths, jaw distributions, and presence of angulated abutments were collected. The following outcomes were evaluated: survival rate, marginal bone loss (MBL), Plaque Index (PI), bleeding on probing (BoP), probing depth (PD). Descriptive statistical analysis was reported and univariate linear regression models were built to assess a significant correlation between MBL and the different implant related factors. RESULTS: Twenty patients were rehabilitated for a total implant number of 80; 11 rehabilitations were performed on the maxilla, while 9 were performed on the mandible; 48 implants presented a 3.8 mm diameter and 32 implants presented a 4.25 mm diameter. Implants length varied between 10 to 15 mm; 40 tilted implants were connected to angulated abutment, while 40 straight implants were connected directly to the prostheses (no abutments). At the one year follow-up visit no implants failed resulting in an implant survival rate of 100%. The overall MBL was 1.19±0.30 mm. No statistically significant difference (P>0.05) was highlighted among any of the subgroups analyzed. CONCLUSIONS: Despite different variables associated, tissue level implants seem to represent a valid option when applied in immediate loading full-arch rehabilitation. Further research and longer observational periods are encouraged to confirm the result.

Can radiomic features extracted from intra-oral radiographs predict physiological bone remodelling around dental implants? A hypothesis-generating study.

AIM: The rate of physiological bone remodelling (PBR) occurring after implant placement has been associated with the later onset of progressive bone loss and peri-implantitis, leading to medium- and long-term implant therapy failure. It is still questionable, however, whether PBR is associated with specific bone characteristics. The aim of this study was to assess whether radiomic analysis could reveal not readily appreciable bone features useful for the prediction of PBR. MATERIALS AND METHODS: Radiomic features were extracted from the radiographs taken at implant placement (T0) using LifeX software. Because of the multi-centre design of the source study, ComBat harmonization was applied to the cohort. Different machine-learning models were trained on selected radiomic features to develop and internally validate algorithms capable of predicting high PBR. In addition, results of the algorithm were included in a multivariate analysis with other clinical variables (tissue thickness and depth of implant position) to test their independent correlation with PBR. RESULTS: Specific radiomic features extracted at T0 are associated with higher PBR around tissue-level implants after 3 months of unsubmerged healing (T1). In addition, taking advantage of machine-learning methods, a naive Bayes model was trained using radiomic features selected by fast correlation-based filter (FCBF), which showed the best performance in the prediction of PBR (AUC = 0.751, sensitivity = 66.0%, specificity = 68.4%, positive predictive value = 73.3%, negative predictive value = 60.5%). In addition, results of the whole model were included in a multivariate analysis with tissue thickness and depth of implant position, which were still found to be independently associated with PBR (p-value < .01). CONCLUSION: The combination of radiomics and machine-learning methods seems to be a promising approach for the early prediction of PBR. Such an innovative approach could be also used for the study of not readily disclosed bone characteristics, thus helping to explain not fully understood clinical phenomena. Although promising, the performance of the radiomic model should be improved in terms of specificity and sensitivity by further studies in this field.

Cost/effectiveness analysis of treatment options for the rehabilitation of the total edentulous mandible.

BACKGROUND: Several solutions are available for the rehabilitation of edentulous jaws. Each treatment option is characterised by specific advantages and drawbacks. OBJECTIVE: The aim of this research was to perform a cost-effectiveness (CE) analysis of the main rehabilitative solutions of totally edentulous mandibles. METHODS: Decision tree models were built using TreeAge Pro Healthcare 2021 software to compare the following strategies: Conventional Denture (CD), Overdenture retained by two implants (OD-2), Overdenture retained by a bar on two implants (ODbar), Overdenture retained by 4 mini-implants (ODmini) and Fixed denture supported by 4 implants (FD). Costs were estimated using data from public rate tables. Effectiveness measures were obtained from a meta-analysis of literature data, normalising the different scales in 0-1 range. A value of 30 000€ per 1 normalised utility points was set as threshold of willingness to pay (WTP). Probabilistic sensitivity analysis (PSA) with 1000 Monte Carlo Simulations was performed to characterise uncertainty. RESULTS: Total costs ranged between 1804,40€ for CD and 10 008,80€ for FD rehabilitations, with an effectiveness of 0,69 and 0,95 normalised points (0-1 scale) for the two solutions. The ODbar resulted to be the most CE strategy at the established WTP value, with the highest Net Monetary Benefit (22 001,20€), followed by the OD-2 rehabilitation (21 866,80€). PSA analysis confirmed the dominance of OD-2 and ODbar strategies, confirming a net separation from the other alternatives. CONCLUSION: OD stabilised by 2 implants could represent a good rehabilitative solution for patients with edentulous mandible, being a good trade-off in terms of costs and effectiveness. Nevertheless, a standardised measure of oral health-related quality of life is needed to obtain more reliable results.

Pattern and localization of perineural invasion predict poor survival in oral tongue carcinoma.

BACKGROUND: Survival rate for oral tongue squamous cell carcinoma (OTSCC) is still poor and, despite Tumor-Node-Metastasis staging system has been recently updated, patients included under the same stage still show difference in prognosis. Perineural invasion (PNI) emerged to be an indicator of tumor aggressive behavior and unfortunate events. In this study, we investigate the clinic and prognostic value of PNI in a cohort of OTSCC patients. METHODS: About 200 patients with OTSCC were retrospectively evaluated the presence of PNI. PNI was furtherly descripted as uni-/multifocal and as intra-/peritumoral. Disease-Specific and Relapse-Free Survival (DSS; RFS) were estimated; moreover, we included PNI in the current AJCC 8th Staging System, improving the prognostication model. RESULTS: Perineural invasion was found in 40.5% of patients. Intratumoral PNI predicted patients at high risk of being diagnosed with lymph-node metastasis. Tumors with positive PNI reported a worse DSS (Hazard Ratio=1.878, p-value = 0.008). Moreover, patients exhibiting both multifocal intra- and peritumoral PNI reported poorest DSS (Hazard Ratio = 2.409, p-value = 0.010). Patients were reclassified in a new staging system in case of multifocal PNI, providing better stratification capacity. CONCLUSIONS: Perineural invasion might serve as an additional prognostic factor in OTSCC, and by integrating PNI in the staging system, further improvements in prognostication might be reached.

Accuracy of trial complete dentures fabricated by using fused deposition modeling 3-dimensional printing: An in vitro study.

STATEMENT OF PROBLEM: Three-dimensional (3D) printing technologies commonly used for trial complete dentures use photopolymerizing resins. Although effective, some clinical, process-related, and practical issues associated with them are still unclear. The option of using alternative printing technologies may help in overcoming limitations. PURPOSE: The purpose of this in vitro study was to evaluate the trueness of trial dentures fabricated by using 3D-printing fused deposition modeling (FDM). MATERIAL AND METHODS: Ten maxillary and 10 mandibular digital complete trial dentures designed from intraoral scans were fabricated from polylactic acid by using a FDM 3D-printer. Each denture was scanned, and the scans were compared with the digital file of the designed denture by means of a surface-matching software program. The mean distance (both signed and absolute) was measured and recorded for the intaglio surface, as well as for the entire denture surface. Statistical analysis was performed to investigate the significance of the extent of measured distances, as well as differences between intaglio and global deviations; subgroup analysis for arch type was also performed (α=.05). RESULTS: Mean values of the intaglio distance were not significantly different from zero (P=.223). The manufacturing accuracy of the intaglio surface was higher than that measured for the entire denture (P<.001), confirmed both by the averaged signed (0 mm and -0.028 mm, respectively) and the absolute mean deviations (0.06 mm and 0.08 mm, respectively). No significant differences were found between maxillary and mandibular trial dentures. CONCLUSIONS: 3D-printing may constitute a valid and practical option for accurate and affordable digital trial dentures.

Prognostic significance of tumor budding thresholds in oral tongue squamous cell carcinoma.

BACKGROUND: Oral tongue squamous cell carcinoma (OTSCC) represents the most common malignancy of the oral cavity. Tumor budding (TB) is a reliable prognostic factor in OTSCC; however, a standardized scoring system is not still validated. AIMS: The study aims to evaluate the prognostic role of TB in 211 OTSCC patients treated between 1997 and 2018. MATERIALS & METHODS: TB was evaluated on hematoxylin and eosin-stained sections in the hotspot area of the infiltrative front (×200-magnification). It was scored using a two-tier system, a three-tier system, and according to BD-model and revised-Grading system. Univariate and multivariate Cox regression analyses of disease-specific survival (DSS) and disease-free survival (DFS) were performed. A p < 0.05 was considered as statistically significant. RESULTS: The two-tier and three-tier systems resulted an independent prognostic factor of DSS. High-risk patients had a 2.21 and 3.08 times increased probability of poor DSS compared with low-risk group. It is significantly increased even for intermediate-risk group. No significant differences emerged classifying patients according to BD-model and revised-Grading system. DISCUSSION: These data confirm the prognostic value of TB in predicting DSS in OTSCC. Classifying patients into two groups using the 5-bud cutoff significantly discriminates their outcomes. CONCLUSION: Since the established role of DOI and the poor prognostic value of grading, TB could be considered an independent prognostic marker.

Intaglio surface trueness of milled and 3D-printed digital maxillary and mandibular dentures: A clinical study.

STATEMENT OF PROBLEM: While the dimensional accuracy of the intaglio surface of a removable complete denture is key to its adaptation, comfort, and clinical performance, information on the ability of milling and 3D-printing workflows to accurately reproduce this surface is lacking. PURPOSE: The purpose of this clinical study was to compare the trueness of the intaglio surface of milled and 3D-printed removable complete digital dentures. MATERIAL AND METHODS: Intraoral scans were obtained from 14 participants for a total of 20 edentulous arches. Ten maxillary and 10 mandibular denture bases were then designed and fabricated with a completely digital workflow, both with milling and 3D-printing. Fabricated dentures were digitized with the same intraoral scanner used to obtain intraoral digital scans of the edentulous arches. Standard tessellation language (STL) files of the printed and milled denture bases were used for 3D analysis and comparisons with the STL file of the corresponding designed denture base. Specifically, a reverse engineering software program was used to trim and extract intaglio surfaces, align them, and measure their global mean 3D distance. In order to evaluate the homogeneity of production accuracy of each manufacturing process, the intaglio surfaces were also divided into several regions of interest and the corresponding 3D distances measured. Within- and between-group differences and maxillary and mandibular dentures differences were assessed with parametric and nonparametric tests (α=.05). RESULTS: Milling showed a global better trueness of the entire intaglio surface (-0.002 mm) than 3D-printing (0.018 mm), both for the whole data set (P<.001) and for maxillary (P=.032) or mandibular (P=.049) denture base subgroups. Within each fabrication technology, maxillary (P<.11) and mandibular dentures (P=.2) showed no significant difference in trueness. Measured deviations were significantly different from zero for the 3D-printed dentures (P<.001), but not for the milled dentures (P=.487). Additionally, for milled dentures, no significant difference in trueness was found among the 11 regions of interest identified for the maxillary dentures (P=.085) and the 13 regions of interest for the mandibular dentures (P=.211). Conversely, 3D-printing showed significant variations in trueness among the same zones of interest, both in maxillary (P<.001) and mandibular (P=.004) dentures. CONCLUSIONS: Within the limits of the manufacturing methodologies used for complete dentures, milling can provide a slightly better trueness of the intaglio surface than 3D-printing, with less variation across several zones of interest. However, given the magnitude of such differences, they may be reasonably considered to be of limited, if any, clinical significance.

Development and international validation of logistic regression and machine-learning models for the prediction of 10-year molar loss.

AIM: To develop and validate models based on logistic regression and artificial intelligence for prognostic prediction of molar survival in periodontally affected patients. MATERIALS AND METHODS: Clinical and radiographic data from four different centres across four continents (two in Europe, one in the United States, and one in China) including 515 patients and 3157 molars were collected and used to train and test different types of machine-learning algorithms for their prognostic ability of molar loss over 10 years. The following models were trained: logistic regression, support vector machine, K-nearest neighbours, decision tree, random forest, artificial neural network, gradient boosting, and naive Bayes. In addition, different models were aggregated by means of the ensembled stacking method. The primary outcome of the study was related to the prediction of overall molar loss (MLO) in patients after active periodontal treatment. RESULTS: The general performance in the external validation settings (aggregating three cohorts) revealed that the ensembled model, which combined neural network and logistic regression, showed the best performance among the different models for the prediction of MLO with an area under the curve (AUC) = 0.726. The neural network model showed the best AUC of 0.724 for the prediction of periodontitis-related molar loss. In addition, the ensembled model showed the best calibration performance. CONCLUSIONS: Through a multi-centre collaboration, both prognostic models for the prediction of molar loss were developed and externally validated. The ensembled model showed the best performance in terms of both discrimination and validation, and it is made freely available to clinicians for widespread use in clinical practice.

Three Dimensional Printed Surgical Guides: Effect of Time on Dimensional Stability.

PURPOSE: To analyze, in vitro, the dimensional stability over time of 3D-printed surgical guides. MATERIALS AND METHODS: Ten surgical guides, manufactured by digital light processing 3D-printing technology, were scanned immediately after post-processing and then after 5, 10, 15, and 20 days. The corresponding standard tessellation language (STL) files were used for comparison with the reference CAD project. Mean absolute deviation (MAD) of the intaglio surface, axial, and linear deviations of the sleeves' housings were measured. Generalized estimated equations models (α = 0.05) were used to investigate the effect of time. RESULTS: MAD of the teeth intaglio surface showed less variation (minimum: 0.002, maximum: 0.014 mm) than that of the mucosa (minimum: 0.026, maximum: 0.074 mm). Axial variations of the sleeves' housings on the sagittal (minimum: -0.008°, maximum: -0.577°) and frontal plane (minimum: -0.193°, maximum: 0.525°) changed with similar patterns, but opposite trends (decreasing for the former). Linear deviations of center points of the sleeves' housings had a shifting (minimum: -0.074, maximum: 0.02 mm) pattern with a decreasing tendency. Time after processing had a significant effect, either alone or nested with guides volume, on all outcomes of interest, except for MAD of the mucosa intaglio surface (p < 0.001), which was significantly affected only by the time-volume nested effect (p = 0.012). CONCLUSIONS: Within the limitations of the experimental design, postmanufacturing dimensional variations of surgical guides were statistically significant. Although limited, they are an additional source of variability affecting the overall accuracy of computer-guided surgery. As such, they should be addressed by further research.

Congenital adrenal hyperplasia. Role of dentist in early diagnosis.

Congenital adrenal hyperplasia (CAH) is a genetic disorder characterized by an impairment of steroid synthesis due to an altered production of 21-hydroxylase enzyme. Corticoid hormones are involved in the development and functioning of many organs. The aim of the present study was to review the international literature to collect data regarding oral manifestations of CAH. A review of the literature describing oral features of patients affected by CAH was performed using electronic databases (PubMed and Scopus). The data about number of patients, form of CAH, and oral findings were extracted and analyzed. Seven studies were included in the final analysis. The principal findings reported regarded an advanced dental development observed in patients with CAH. One paper reported amelogenesis imperfecta and periodontal issues. The dentist could be the first specialist involved in the CAH syndrome diagnosis, identifying the characteristic features described above, especially for the classical simple virilizing and non-classical form.