Enhancement of thermostability of GH10 xylanase E Penicillium canescens directed by ΔΔG calculations and structure analysis.

Hydrolytic enzymes are highly demanded in the industry. Thermostability is an important property of enzymes that affects the economic costs of the industrial processes. The rational design of GH10 xylanase E (XylE) Penicillium canescens for the thermostability improvement was directed by ΔΔG calculations and structure analysis. Amino acid substitutions with stabilizing values of ΔΔG and providing an increase in side-chain volume of buried residues were performed experimentally. From the six designed substitutions, four substitutions appeared to be stabilizing, one - destabilizing, and one - neutral. For the improved XylE variants, values of Tm were increased by 1.1-3.1 °C, and times of half-life at 70 °C were increased in 1.3-1.7-times. Three of the four stabilizing substitutions were located in the N- or the C-terminus region. This highlights the importance of N- and C-terminus for the thermostability of GH10 xylanases and also enzymes with (ß/α)8 TIM barrel type of structure. The criteria of stabilizing values of ΔΔG and increased side-chain volume of buried residues for selection of substitutions may be applied in the rational design for thermostability improvement.

Expression and Refolding of the Plant Chitinase From Drosera capensis for Applications as a Sustainable and Integrated Pest Management.

Recently, the study of chitinases has become an important target of numerous research projects due to their potential for applications, such as biocontrol pest agents. Plant chitinases from carnivorous plants of the genus Drosera are most aggressive against a wide range of phytopathogens. However, low solubility or insolubility of the target protein hampered application of chitinases as biofungicides. To obtain plant chitinase from carnivorous plants of the genus Drosera in soluble form in E.coli expression strains, three different approaches including dialysis, rapid dilution, and refolding on Ni-NTA agarose to renaturation were tested. The developed « Rapid dilution ¼ protocol with renaturation buffer supplemented by 10% glycerol and 2M arginine in combination with the redox pair of reduced/oxidized glutathione, increased the yield of active soluble protein to 9.5 mg per 1 g of wet biomass. A structure-based removal of free cysteines in the core domain based on homology modeling of the structure was carried out in order to improve the soluble of chitinase. One improved chitinase variant (C191A/C231S/C286T) was identified which shows improved expression and solubility in E. coli expression systems compared to wild type. Computational analyzes of the wild-type and the improved variant revealed overall higher fluctuations of the structure while maintaining a global protein stability. It was shown that free cysteines on the surface of the protein globule which are not involved in the formation of inner disulfide bonds contribute to the insolubility of chitinase from Drosera capensis. The functional characteristics showed that chitinase exhibits high activity against colloidal chitin (360 units/g) and high fungicidal properties of recombinant chitinases against Parastagonospora nodorum. Latter highlights the application of chitinase from D. capensis as a promising enzyme for the control of fungal pathogens in agriculture.

An engineered cellobiohydrolase I for sustainable degradation of lignocellulosic biomass.

This study provides computational-assisted engineering of the cellobiohydrolase I (CBH-I) from Penicillium verruculosum with simultaneous enhanced thermostability and tolerance in ionic liquids, deep eutectic solvent, and concentrated seawater without affecting its wild-type activity. Engineered triple variant CBH-I R1 (A65R-G415R-S181F) showed 2.48-fold higher thermostability in terms of relative activity at 65°C after 1 h of incubation when compared with CBH-I wild type. CBH-I R1 exhibited 1.87-fold, 1.36-fold, and 1.57-fold higher specific activities compared with CBH-I wild type in [Bmim]Cl (50 g/L), [Ch]Cl (50 g/L), and two-fold concentrated seawater, respectively. In the multicellulases mixture, CBH-I R1 showed higher hydrolytic efficiency to hydrolyze aspen wood compared with CBH-I wild type in the buffer, [Bmim]Cl (50 g/L), and two-fold concentrated seawater, respectively. Structural analysis revealed a molecular basis for the higher stability of the CBH-I structure in which A65R and G415R substitutions form salt bridges (D64 … R65, E411 … R415) and S181F forms π-π interaction (Y155 … F181), leading to stabilize surface-exposed flexible α-helixes and loop in the multidomain ß-jelly roll fold structure, respectively. In conclusion, the variant CBH-I R1 could enable efficient lignocellulosic biomass degradation as a cost-effective alternative for the sustainable production of biofuels and value-added chemicals.

Heterologous Expression of Thermogutta terrifontis Endo-Xanthanase in Penicillium verruculosum, Isolation and Primary Characterization of the Enzyme.

Heterologous endo-xanthanase (EX) from the thermophilic planktomycete Thermogutta terrifontis strain was obtained using Penicillium verruculosum 537 (ΔniaD) expression system with the cellobiohydrolase 1 gene promoter. Homogeneous EX with a molecular weight of 23.7 kDa (pI 6.5) was isolated using liquid chromatography methods. This xanthan degrading enzyme also possesses the enzymatic activity towards CM-cellulose, ß-glucan, curdlan, lichenan, laminarin, galactomannan, xyloglucan but not towards p-nitrophenyl derivatives of ß-D-glucose, mannose and cellobiose. The temperature and pH optima of EX were 55°C and 4.0, respectively; the enzyme exhibited 90% of its maximum activity in the temperature range 50-60°C and pH 3-5.

Designing enzyme cocktails from Penicillium and Aspergillus species for the enhanced saccharification of agro-industrial wastes.

The aim of this study was to develop optimized enzyme cocktails, containing native and recombinant purified enzymes from five fungal species, for the saccharification of alkali- and acid-pretreated sugarcane bagasse (SCB), soybean hulls (SBH) and oil palm empty fruit bunches (EFB). Basic cellulases were represented by cellobiohydrolase I (CBH) and endo-glucanase II (EG) from Penicillium verruculosum and ß-glucosidase (BG) from Aspergillus niger. Auxiliary enzymes were represented by endo-xylanase A (Xyl), pectin lyase (PNL) and arabinoxylanhydrolase (AXH) from Penicillium canescens, ß-xylosidase (BX) from Aspergillus japonicus, endo-arabinase (ABN) from A. niger and arabinofuranosidase (Abf) from Aspergillus foetidus. Enzyme loads were 5 mg protein/g dry substrate (basic cellulases) and 1 mg/g (each auxiliary enzyme). The best choice for SCB and EFB saccharification was alkaline pretreatment and addition of Xyl + BX, AXH + BX or ABN + BX + Abf to basic cellulases. For SBH, acid pretreatment and basic cellulases combined with ABN + BX + Abf or Xyl + BX performed better than other enzyme preparations.

Rational design and structure insights for thermostability improvement of Penicillium verruculosum Cel7A cellobiohydrolase.

Thermostability is a fundamental characteristic of enzymes that is of high importance for industrial implementation of enzymatic catalysis. Cellobiohydrolases are enzymes capable to hydrolyze the most abundant natural polysaccharide - cellulose. These enzymes are widely applied in industry for processing of cellulose containing materials. However, structural and functional engineering of cellobiohydrolases for improving their properties is a challenging task. In this study, the thermostability of Penicillium verruculosum Cel7A cellobiohydrolase was increased through rational design of substitutions with proline. The stabilizing substitution G415P resulted in 3.4-fold increase in half-life time at 60 °C compared to wild-type enzyme. Molecular dynamics simulations indicated a clear effect of the stabilizing substitution G415P and the destabilizing substitutions D62P, S191P, and S273P on the stability of the enzyme tertiary structure. The stabilizing substitution G415P decreased flexibility of the lateral sides of the enzyme active site tunnel, while the considered destabilizing substitutions increased their flexibility.

Engineering Robust Cellulases for Tailored Lignocellulosic Degradation Cocktails.

Lignocellulosic biomass is a most promising feedstock in the production of second-generation biofuels. Efficient degradation of lignocellulosic biomass requires a synergistic action of several cellulases and hemicellulases. Cellulases depolymerize cellulose, the main polymer of the lignocellulosic biomass, to its building blocks. The production of cellulase cocktails has been widely explored, however, there are still some main challenges that enzymes need to overcome in order to develop a sustainable production of bioethanol. The main challenges include low activity, product inhibition, and the need to perform fine-tuning of a cellulase cocktail for each type of biomass. Protein engineering and directed evolution are powerful technologies to improve enzyme properties such as increased activity, decreased product inhibition, increased thermal stability, improved performance in non-conventional media, and pH stability, which will lead to a production of more efficient cocktails. In this review, we focus on recent advances in cellulase cocktail production, its current challenges, protein engineering as an efficient strategy to engineer cellulases, and our view on future prospects in the generation of tailored cellulases for biofuel production.

Cloning, purification and study of recombinant GH3 family ß-glucosidase from Penicillium verruculosum.

A novel bgl1 gene, encoding GH3 family ß-glucosidase from Penicillium verruculosum (PvBGL), was cloned and heterologously expressed in P. canescens RN3-11-7 (niaD-) strain under the control of the strong xylA gene promoter. The recombinant rPvBGL was purified and their properties were studied in comparison with those of rAnBGL from Aspergillus niger expressed previously in the same fungal host. The rPvBGL had an observed molecular mass of 90 kDa (SDS-PAGE data) and displayed the enzyme maximum activity at pH 4.6 and 65 °C. The enzyme half-life time at 60 °C was found to be 87 min. Unlike the rAnBGL, the rPvBGL was not adsorbed on microcrystalline cellulose, which gives the latter enzyme an advantage in cellulose conversion with a longer time of hydrolysis.

Protein surface engineering of endoglucanase Penicillium verruculosum for improvement in thermostability and stability in the presence of 1-butyl-3-methylimidazolium chloride ionic liquid.

Thermostability and stability in ionic liquids are essential properties of cellulases that are applied in industrial processes of bioconversion. Engineering of protein surface of endoglucanase II from Penicillium verruculosum was used to improve the enzyme thermostability and stability in 1-butyl-3-methylimidazolium chloride ([Bmim]Cl). The engineering was based on analysis of the protein surface topography and enhanced by multiple sequence alignment and ΔΔG calculations. In the case of the thermostability, half-life time was improved in 1.3-1.6 times at 70 °C and 1.2-1.4 times at 80 °C. In the case of the stability in [Bmim]Cl, the residual activity after 72 h of incubation in the presence of [Bmim]Cl (50 g/L, 50 °C, pH 4.5) was 1.7-1.9 times greater for the tailored enzyme. The yield of reducing sugars after enzymatic hydrolysis of aspen wood pretreated with [Bmim]Cl was 10-20% higher with the tailored endoglucanase.

Novel endo-(1,4)-ß-glucanase Bgh12A and xyloglucanase Xgh12B from Aspergillus cervinus belong to GH12 subgroup I and II, respectively.

In spite of intensive exploitation of aspergilli for the industrial production of carbohydrases, little is known about hydrolytic enzymes of fungi from the section Cervini. Novel glycoside hydrolases Bgh12A and Xgh12B from Aspergillus cervinus represent examples of divergent activities within one enzyme family and belong to the GH12 phylogenetic subgroup I (endo-(1,4)-ß-glucanases) and II (endo-xyloglucanases), respectively. The bgh12A and xgh12B genes were identified in the unsequenced genome of A. cervinus using primers designed for conservative regions of the corresponding subgroups and a genome walking approach. The recombinant enzymes were heterologously produced in Pichia pastoris, purified, and characterized. Bgh12A was an endo-(1,4)-ß-glucanase (EC 3.2.1.4) hydrolyzing the unbranched soluble ß-(1,4)-glucans and mixed linkage ß-(1,3;1,4)-D-glucans. Bgh12A exhibited maximum activity on barley ß-glucan (BBG), which amounted to 614 ± 30 U/mg of protein. The final products of BBG and lichenan hydrolysis were glucose, cellobiose, cellotriose, 4-O-ß-laminaribiosyl-glucose, and a range of higher mixed-linkage gluco-oligosaccharides. In contrast, the activity of endo-xyloglucanase Xgh12B (EC 3.2.1.151) was restricted to xyloglucan, with 542 ± 39 U/mg protein. The enzyme cleaved the (1,4)-ß-glycosidic bonds of the xyloglucan backbone at the unsubstituted glucose residues finally generating cellotetraose-based hepta-, octa, and nona-oligosaccharides. Bgh12A and Xgh12B had maximal activity at 55 °C, pH 5.0. At these conditions, the half-time of Xgh12B inactivation was 158 min, whereas the half-life of Bgh12A was 5 min. Recombinant P. pastoris strains produced up to 106 U/L of the target enzymes with at least 75% of recombinant protein in the total extracellular proteins. The Bgh12A and Xgh12B sequences show 43% identity. Strict differences in substrate specificity of Bgh12A and Xgh12B were in congruence with the presence of subgroup-specific structural loops and substrate-binding aromatic residues in the catalytic cleft of the enzymes. Individual composition of aromatic residues in the catalytic cleft defined variability in substrate selectivity within GH12 subgroups I and II.

Complex effect of lignocellulosic biomass pretreatment with 1-butyl-3-methylimidazolium chloride ionic liquid on various aspects of ethanol and fumaric acid production by immobilized cells within SSF.

The pretreatment of softwood and hardwood samples (spruce and hornbeam wood) with 1-butyl-3-methylimidazolium chloride ([Bmim]Cl) was undertaken for further simultaneous enzymatic saccharification of renewable non-food lignocellulosic biomass and microbial fermentation of obtained sugars to ethanol and fumaric acid. A multienzyme cocktail based on cellulases and yeast or fungus cells producing ethanol and fumaric acid were the main objects of [Bmim]Cl influence studies. A complex effect of lignocellulosic biomass pretreatment with [Bmim]Cl on various aspects of the process (both action of cellulases and microbial conversion of hydrolysates to target products) was revealed. Positive effects of the pretreatment with [Bmim]Cl included decreasing the lignin content in the biomass, and increasing the effectiveness of enzymatic hydrolysis and microbial transformation of pretreated biomass. Immobilized cells of both yeasts and fungi possessed improved productive characteristics in the biotransformation of biomass pretreated with [Bmim]Cl to ethanol and fumaric acid.

Site-directed mutagenesis of GH10 xylanase A from Penicillium canescens for determining factors affecting the enzyme thermostability.

In order to investigate factors affecting the thermostability of GH10 xylanase A from Penicillium canescens (PcXylA) and to obtain its more stable variant, the wild-type (wt) enzyme and its mutant forms, carrying single amino acid substitutions, were cloned and expressed in Penicillium verruculosum B1-537 (niaD-) auxotrophic strain under the control of the cbh1 gene promoter. The recombinant PcXylA-wt and I6V, I6L, L18F, N77D, Y125R, H191R, S246P, A293P mutants were successfully expressed and purified for characterization. The mutations did not affect the enzyme specific activity against xylan from wheat as well as its pH-optimum of activity. One mutant (L18F) displayed a higher thermostability relative to the wild-type enzyme; its half-life time at 50-60°C was 2-2.5-fold longer than that for the PcXylA-wt, and the melting temperature was 60.0 and 56.1°C, respectively. Most of other mutations led to decrease in the enzyme thermostability. This study, together with data of other researchers, suggests that multiple mutations should be introduced into GH10 xylanases in order to dramatically improve their stability.

Glucoamylases from Penicillium verruculosum and Myceliophthora thermophila: analysis of differences in activity against polymeric substrates based on 3D model structures of the intact enzymes.

Two glucoamylases, a recombinant enzyme from Penicillium verruculosum (PvGla) heterologously expressed in Penicillium canescens RN3-11-7 (niaD-) strain and a native glucoamylase from Myceliophthora thermophila (MtGla), were purified and their properties were studied. MtGla displayed 2-5-fold higher specific activities against soluble starch, amylose and amylopectin than PvGla. MtGla also provided higher glucose yields in extended hydrolysis of the polymeric substrates. Analysis of 3D model structures of the intact PvGla and MtGla, which were built using the 2vn7.pdb crystal structure of the intact Trichoderma reesei glucoamylase (TrGla) as a template, showed that the reason for lower hydrolytic performance of PvGla in comparison to MtGla may be less strong interactions between the enzyme domains as well as a longer (by 17 residues) linker in the first enzyme.