ABSTRACT
The Rubella virus (RUBV) is a highly contagious pathogen classified within the rubivirus genus, primarily infecting humans and transmitted via airborne routes. RUBV infection generally manifests as a mild illness reminiscent of measles. However, when affecting pregnant women, it can lead to a severe condition known as congenital rubella syndrome (CRS). Rubella infection could be also associated with joint pain, arthritis, and neurological disorders. Determination of Rubella immunity and diagnosis conventionally involve the Hemagglutination Inhibition (HI) test or the Enzyme-Linked Immunosorbent Assay (ELISA). In this study, we describe the selection and characterization of specific aptamers targeting the Rubella virus by using the process of Systematic Evolution of Ligands by EXponantial enrichment (SELEX). The Binding affinity studies have shown that the two aptamers; R-7 and R-5 display the lowest dissociation constants (Kd) of 6.58 nM and 19.05 nM, respectively. Then, R-7 aptamer was modified with a thiol group to enable its immobilization on screen-printed gold electrodes for the Rubella virus aptasensing. The label-free electrochemical detection was achieved using square wave voltammetry (SWV). The designed aptasensor has shown an excellent performance in detecting the Rubella virus within the range of 0.0005 ng/ml to 1000 ng/ml antigen and a limit of detection (LOD) of 0.00015 ng/ml. Selectivity studies were also performed against other viral antigens and serum proteins. Finally, the biosensor applicability was successfully demonstrated in spiked serum samples.
Subject(s)
Aptamers, Nucleotide , Biosensing Techniques , Electrochemical Techniques , Rubella virus , Rubella virus/chemistry , Rubella virus/isolation & purification , Rubella virus/immunology , Aptamers, Nucleotide/chemistry , Biosensing Techniques/methods , Electrochemical Techniques/methods , SELEX Aptamer Technique , Humans , Electrodes , Limit of Detection , Gold/chemistryABSTRACT
This study introduces an innovative electrochemical aptasensor designed for the highly sensitive and rapid detection of Legionella pneumophila serogroup 1 (L. pneumophila SG1), a particularly virulent strain associated with Legionellosis. Employing a rigorous selection process utilizing cell-based systematic evolution of ligands by exponential enrichment (cell-SELEX), we identified new high-affinity aptamers specifically tailored for L. pneumophila SG1. The selection process encompassed ten rounds of cell-SELEX cycles with live L. pneumophila, including multiple counter-selection steps against the closely related Legionella sub-species. The dissociation constant (Kd) of the highest affinity sequence to L. pneumophila SG1 was measured at 14.2 nM, representing a ten-fold increase in affinity in comparison with the previously reported aptamers. For the development of electrochemical aptasensor, a gold electrode was modified with the selected aptamer through the formation of self-assembled monolayers (SAMs). The newly developed aptasensor exhibited exceptional sensitivity, and specificity in detecting and differentiating various Legionella sp., with a detection limit of 5 colony forming units (CFU)/mL and an insignificant/negligible cross-reactivity with closely related sub-species. Furthermore, the aptasensor effectively detected L. pneumophila SG1 in spiked water samples, demonstrating an appreciable recovery percentage. This study shows the potential of our aptamer-based electrochemical biosensor as a promising approach for detecting L. pneumophila SG1 in diverse environments.
Subject(s)
Aptamers, Nucleotide , Biosensing Techniques , Electrochemical Techniques , Legionella pneumophila , SELEX Aptamer Technique , Legionella pneumophila/isolation & purification , Biosensing Techniques/methods , SELEX Aptamer Technique/methods , Aptamers, Nucleotide/chemistry , Electrochemical Techniques/methods , Serogroup , Gold/chemistry , Sensitivity and Specificity , Limit of Detection , HumansABSTRACT
In this study, we report a multiplexed platform for the simultaneous determination of five marine toxins. The proposed biosensor is based on a disposable electrical printed (DEP) microarray composed of eight individually addressable carbon electrodes. The electrodeposition of gold nanoparticles on the carbon surface offers high conductivity and enlarges the electroactive area. The immobilization of thiolated aptamers on the AuNP-decorated carbon electrodes provides a stable, well-orientated and organized binary self-assembled monolayer for sensitive and accurate detection. A simple electrochemical multiplexed aptasensor based on AuNPs was designed to synchronously detect multiple cyanotoxins, namely, microcystin-LR (MC-LR), Cylindrospermopsin (CYL), anatoxin-α, saxitoxin and okadaic acid (OA). The choice of the five toxins was based on their widespread presence and toxicity to aquatic ecosystems and humans. Taking advantage of the conformational change of the aptamers upon target binding, cyanotoxin detection was achieved by monitoring the resulting electron transfer increase by square-wave voltammetry. Under the optimal conditions, the linear range of the proposed aptasensor was estimated to be from 0.018 nM to 200 nM for all the toxins, except for MC-LR where detection was possible within the range of 0.073 to 150 nM. Excellent sensitivity was achieved with the limits of detection of 0.0033, 0.0045, 0.0034, 0.0053 and 0.0048 nM for MC-LR, CYL, anatoxin-α, saxitoxin and OA, respectively. Selectivity studies were performed to show the absence of cross-reactivity between the five analytes. Finally, the application of the multiplexed aptasensor to tap water samples revealed very good agreement with the calibration curves obtained in buffer. This simple and accurate multiplexed platform could open the window for the simultaneous detection of multiple pollutants in different matrices.
Subject(s)
Aptamers, Nucleotide , Biosensing Techniques , Cyanobacteria Toxins , Electrochemical Techniques , Gold , Marine Toxins , Metal Nanoparticles , Microcystins , Saxitoxin , Marine Toxins/analysis , Microcystins/analysis , Gold/chemistry , Saxitoxin/analysis , Metal Nanoparticles/chemistry , Bacterial Toxins/analysis , Uracil/analysis , Uracil/analogs & derivatives , Tropanes/analysis , Alkaloids/analysis , Okadaic Acid/analysis , Electrodes , Limit of DetectionABSTRACT
The integration of microfabrication and microfluidics techniques into cell culture technology has significantly transformed cell culture conditions, scaffold architecture, and tissue biofabrication. These tools offer precise control over cell positioning and enable high-resolution analysis and testing. Culturing cells in 3D systems, such as spheroids and organoids, enables recapitulating the interaction between cells and the extracellular matrix, thereby allowing the creation of human-based biomimetic tissue models that are well-suited for pre-clinical drug screening. Here, we demonstrate an innovative microfluidic device for the formation, culture, and testing of hepatocyte spheroids, which comprises a large array of patterned microwells for hosting hepatic spheroid culture in a reproducible and organized format in a dynamic fluidic environment. The device allows maintaining and characterizing different spheroid sizes as well as exposing to various drugs in parallel enabling high-throughput experimentation. These liver spheroids exhibit physiologically relevant hepatic functionality, as evidenced by their ability to produce albumin and urea at levels comparable to in vivo conditions and the capability to distinguish the toxic effects of selected drugs. This highlights the effectiveness of the microenvironment provided by the chip in maintaining the functionality of hepatocyte spheroids. These data support the notion that the liver-spheroid chip provides a favorable microenvironment for the maintenance of hepatocyte spheroid functionality.
ABSTRACT
An optical photonic biosensor for the detection of microcystin (MC) has been developed using an aptamer-immobilized interpenetrating polymeric network (IPNaptamer) intertwined with solid-state cholesteric liquid crystals (CLCsolids). The IPN was constructed with a polyacrylic acid hydrogel (PAA). Aptamer immobilization enhances polarity while blocking hydrogen bonding between the carboxylic groups of PAA-IPN hydrogel, thereby increasing the swelling ratio of the PAA-IPN hydrogel. This leads to an expansion in the helical pitch of the corresponding IPNaptamer-CLCsolid biosensor chip and results in a red-shift in the reflected color. Upon exposure to an aqueous MC solution, the IPNaptamer-CLCsolid biosensor chip exhibits aptamer-mediated engulfment of MC, resulting in reduced polarity of the IPNaptamer complex and a consequential blue-shift in the biosensor chip color occurred. The wavelength shift of the IPNaptamer-CLCsolid biosensor chip demonstrates a linear change with an increase in MC concentration from 3.8 to 150 nM, with a limit of detection of 0.88 nM. This novel optical biosensor is characterized by its low cost, simplicity, selectivity, and sensitivity, offering a promising strategy for designing similar toxin biosensors through the modification of biological receptors.
Subject(s)
Aptamers, Nucleotide , Biosensing Techniques , Limit of Detection , Microcystins , Biosensing Techniques/methods , Biosensing Techniques/instrumentation , Microcystins/analysis , Aptamers, Nucleotide/chemistry , Liquid Crystals/chemistry , Acrylic Resins/chemistry , Hydrogels/chemistry , Equipment Design , PhotonsABSTRACT
Brucellosis is a bacterial zoonotic disease that requires major attention for both health and financial facilities in many parts of the world including the Mediterranean and the Middle East. The existing gold standard diagnosis relies on the culturing technique, which is costly and time-consuming with a duration of up to 45 days. The Brucella protease biosensor represents a new detection approach that will lead to low-cost point-of-care devices for sensitive Brucella detection. In addition, the described diagnostic device is portable and simple to operate by a nurse or non-skilled clinician making it appropriate for the low-resource setting. In this study, we rely on the total extracellular protease proteolytic activity on specific peptide sequences identified using the FRET assay by high-throughput screening from the library of peptide (96 short peptides such as dipeptides and tripeptides) substrates for Brucella melitensis (B. melitensis). The B. melitensis-specific protease substrate was utilized in the development of the paper-based colorimetric assay. Two specific and highly active dipeptide substrates were identified (FITC-Ahx-K-r-K-Ahx-DABCYL and FITC-Ahx-R-r-K-Ahx-DABCYL). The peptide-magnetic bead nanoprobe sensors developed based on these substrates were able to detect the Brucella with LOD as low as 1.5 × 102 and 1.5 × 103 CFU/mL using K-r dipeptide and R-r dipeptide substrates, respectively, as the recognition element. The samples were tested using this sensor in few minutes. Cross-reactivity studies confirmed that the other proteases extracted from closely related pathogens have no significant effect on the sensor. To the best of our knowledge, this assay is the first assay that can be used with low-cost, rapid, direct, and visual detection of B. melitensis.
ABSTRACT
Pharmaceutical pollution has received considerable attention because of the harmful effects of pharmaceutical compounds on human health, even in trace amounts. Amoxicillin is one of the frequently used antibiotics that was included in the list of emerging water pollutants. Therefore, a highly selective and rapid technique for amoxicillin detection is required. In this work, a new aptamer was selected for amoxicillin and utilized for the development of a label-free electrochemical aptasensor. Aptamer selection was performed using the systematic evolution of ligands by exponential enrichment. The selected aptamer showed good specificity against other antibiotics, including the structurally related antibiotics: ampicillin and ciprofloxacin. Among the selected aptamers, Amx3 exhibited the lowest dissociation constant value of 112.9 nM. An aptasensor was developed by immobilization of thiolated Amx3 aptamer onto gold screen-printed electrodes via self-assembly, which was characterized using cyclic voltammetry and electrochemical impedance spectroscopy. The detection was realized by monitoring the change in the differential pulse voltammetry peak current in the ferro/ferricyanide redox couple upon binding of the aptasensor to amoxicillin. The aptasensor showed very good sensitivity with an ultralow limit of detection of 0.097 nM. When the aptasensor was tested using actual spiked milk samples, excellent recovery percentages were observed. The label-free electrochemical aptasensor developed herein is a promising tool for the selective and sensitive detection of amoxicillin in environmental samples.
Subject(s)
Amoxicillin , Aptamers, Nucleotide , Biosensing Techniques , Electrochemical Techniques , Milk , Amoxicillin/analysis , Amoxicillin/chemistry , Aptamers, Nucleotide/chemistry , Biosensing Techniques/methods , Electrochemical Techniques/methods , Milk/chemistry , Anti-Bacterial Agents/analysis , Anti-Bacterial Agents/chemistry , Electrodes , Gold/chemistry , Animals , Limit of Detection , SELEX Aptamer TechniqueABSTRACT
Giardia intestinalis is one of the most widespread intestinal parasites and is considered a major cause of epidemic or sporadic diarrhea worldwide. In this study, we aimed to develop a rapid aptameric diagnostic technique for G. intestinalis infection. First, the SELEX (Systematic Evolution of Ligands by Exponential Enrichment) process generated DNA aptamers specific to a recombinant protein of the parasite's trophozoite. Ten selection rounds were performed; each round, the DNA library was incubated with the target protein conjugated to Sepharose beads. Then, the unbound sequences were removed by washing and the specific sequences were eluted and amplified by Polymerase Chain Reaction (PCR). Two aptamers were selected, and the dissociation constants (Kd), were determined as 2.45 and 16.95 nM, showed their high affinity for the G. intestinalis trophozoite protein. Subsequently, the aptamer sequence T1, which exhibited better affinity, was employed to develop a label-free electrochemical biosensor. A thiolated aptamer was covalently immobilized onto a gold screen-printed electrode (SPGE), and the binding of the targeted protein was monitored using square wave voltammetry (SWV). The developed aptasensor enabled accurate detection of the G. intestinalis recombinant protein within the range of 0.1 pg/mL to 100 ng/mL, with an excellent sensitivity (LOD of 0.35 pg/mL). Moreover, selectivity studies showed a negligible cross-reactivity toward other proteins such as bovine serum albumin, globulin, and G. intestinalis cyst protein.
Subject(s)
Aptamers, Nucleotide , Biosensing Techniques , Electrochemical Techniques , Giardia lamblia , Protozoan Proteins , SELEX Aptamer Technique , Aptamers, Nucleotide/chemistry , Biosensing Techniques/methods , SELEX Aptamer Technique/methods , Electrochemical Techniques/methods , Protozoan Proteins/chemistry , DNA, Single-Stranded/chemistry , Giardiasis/diagnosis , Giardiasis/parasitologyABSTRACT
Matrix metalloproteinases (MMPs) are zinc-dependent proteinases that are capable of cleavage of extracellular matrix (ECM) proteins and enzymes and play an important role in lung dysfunction. Specifically, MMP-2 is produced in the lung by alveolar epithelial and endothelial cells and other immune cells, such as macrophages. MMP-2 regulatory pathway is initiated in alveolar macrophages during acute lung injury (ALI), which may increase pulmonary inflammation. Therefore, there is a critical need for fast and reliable techniques to track the acute respiratory distress syndrome (ARDS). Here, we describe near-infrared fluorescence resonance energy transfer (NI-FRET) MMP-2-based probe for the in vivo detection of ALI induced by lipopolysaccharides (LPS). LPS-induced MMP-2 was measured using near-infrared (NIR) imaging after 1, 2, 4, 5, and 24 h of LPS exposure. Our results were compared with the data obtained from ELISA and Western blotting, demonstrating that MMP-2 fluorescence probe provide a promising in vivo diagnostic tool for ALI/ARDS in infected mice.
ABSTRACT
Over the past decade, solid-state cholesteric liquid crystals (CLCsolid ) have emerged as a promising photonic material, heralding new opportunities for the advancement of optical photonic biosensors and actuators. The periodic helical structure of CLCsolid s gives rise to their distinctive capability of selectively reflecting incident radiation, rendering them highly promising contenders for a wide spectrum of photonic applications. Extensive research is conducted on utilizing CLCsolid 's optical characteristics to create optical sensors for bioassays, diagnostics, and environmental monitoring. This review provides an overview of emerging technologies in the field of interpenetrating polymeric network-CLCsolid (IPN) and CLCsolid -based optical sensors, including their structural designs, processing, essential materials, working principles, and fabrication methodologies. The review concludes with a forward-looking perspective, addressing current challenges and potential trajectories for future research.
ABSTRACT
The development of a colorimetric severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) detection assay with the WHO published ASSURED criteria is reported, in which the biosensor should have the following characteristics of (i) being affordable for low-income communities, (ii) sensitive, (iii) specific, (iv) user-friendly to be used by non-skilled personnel, (v) rapid and robust, (vi) equipment-free, and (vii) delivered to the end-users as a simple and easy to use point-of-care tool. Early viral infection detection prevents virus spread and controls the epidemic. We herein report the development of a colorimetric assay in which SARS-COV-2 variants can be detected by colorimetric observation of color on the sensing cotton swab surface. Using the developed biosensor assay, it is possible to discriminate between the various SARS-CoV-2 variants with a LOD of 100 ng/mL within 4 min including sample preconcentration and incubation step. The results illustrated the development of a SARS-CoV-2 colorimetric biosensor that can be mass produced, with low-reagent cost, and can be read-out visually in the field by nonskilled personnel.
ABSTRACT
MicroRNAs (miRNAs) are short non-coding RNAs that are found in various cellular compartments and play an important role in regulating gene expression. Extracellular miRNAs, such as those found within extracellular vesicles such as exosomes are involved in cell-to-cell communication. The intercellular transfer of miRNAs has been implicated in various diseases' pathogenesis including cancer and has been studied extensively as potential cancer biomarkers. However, the extraction of miRNA from exosomes is still a challenging task. The current nucleic acid extraction assays are expensive and labor-intensive. In this study, we demonstrated a microfluidic device for aptamer-based magnetic separation of the exosomes and subsequent detection of the miRNA using a fluorescence switching assay, which was enabled by carbon nanomaterials coated on magnetic beads. In the OFF state, the fluorophore-labelled cDNA is quenched using carbon nanomaterials. However, when the target miRNA210 is introduced, the cDNA detaches from the bead's surface, which leads to an increase in the fluorescence intensity (ON state). This increment was found to be proportional to miRNA concentration within the dynamic range of 0-100 nM with a detection limit of 5 pM. The assay was validated with spiked miRNA using the standard RT-PCR method. No notable cross-reactivity with other closely related miRNAs was observed. The developed method can be utilized for the minimally invasive detection of cancer biomarkers.
ABSTRACT
Sepsis is an immune response to a microbial invasion that causes organ injury and dysfunction due to a systemic inflammatory response. Sepsis is a serious, life-threatening condition and a widely recognized global health challenge. Given its high death rate, it is critical to diagnose sepsis and start treatment as early as possible. There is an urgent need for a sensitive and rapid screening method for detecting sepsis. In this study, we investigated the use of MMP-9 as a biomarker for sepsis. A colorimetric paper-based biosensor was used for the detection of MMP-9 utilizing peptide-magnetic nanoparticle conjugates. The method is based on the cleavage of the MMP-9-specific peptide by the protease leading to the detaching of the magnetic beads from the sensor surface and changing of color. A fecal intraperitoneal (FIP) challenge was used to induce sepsis in mice, and an MMP-9 secretion was measured by taking blood and Bronchoalveolar Lavage (BAL) fluid samples at 1 h, 2 h, 4 h, and 20 h (early sepsis) post-challenge intervals. The results of the paper-based sensor for the detection of MMP-9 levels in blood samples and BAL samples were compared with ELISA and Western Blot. We found that both blood and BAL levels of MMP-9 increased immediately and could be detected as early as 1 h in FIP mice post-challenge. Our work adds evidence to the assertion that MMP-9 is a reliable biomarker for the detection of sepsis at early stages.
Subject(s)
Matrix Metalloproteinase 9 , Sepsis , Animals , Mice , Sepsis/diagnosis , Biomarkers , Colorimetry , Disease Models, AnimalABSTRACT
Acute respiratory distress syndrome (ARDS) is a worldwide health concern. The pathophysiological features of ALI/ARDS include a pulmonary immunological response. The development of a rapid and low-cost biosensing platform for the detection of ARDS is urgently needed. In this study, we report the development of a paper-based multiplexed sensing platform to detect human NE, PR3 and MMP-2 proteases. Through monitoring the three proteases in infected mice after the intra-nasal administration of LPS, we showed that these proteases played an essential role in ALI/ARDS. The paper-based sensor utilized a colorimetric detection approach based on the cleavage of peptide-magnetic nanoparticle conjugates, which led to a change in the gold nanoparticle-modified paper sensor. The multiplexing of human NE, PR3 and MMP-2 proteases was tested and compared after 30 min, 2 h, 4 h and 24 h of LPS administration. The multiplexing platform of the three analytes led to relatively marked peptide cleavage occurring only after 30 min and 24 h. The results demonstrated that MMP-2, PR3 and human NE can provide a promising biosensing platform for ALI/ARDS in infected mice at different stages. MMP-2 was detected at all stages (30 min-24 h); however, the detection of human NE and PR3 can be useful for early- (30 min) and late-stage (24 h) detection of ALI/ARDS. Further studies are necessary to apply these potential diagnostic biosensing platforms to detect ARDS in patients.
Subject(s)
Metal Nanoparticles , Respiratory Distress Syndrome , Humans , Animals , Mice , Bronchoalveolar Lavage Fluid , Lipopolysaccharides , Matrix Metalloproteinase 2 , Gold , Respiratory Distress Syndrome/diagnosis , Biomarkers , Peptide HydrolasesABSTRACT
Studying the immune system in vitro aims to understand how, when, and where the immune cells migrate/differentiate and respond to the various triggering events and the decision points along the immune response journey. It becomes evident that organ-on-a-chip (OOC) technology has a superior capability to recapitulate the cell-cell and tissue-tissue interaction in the body, with a great potential to provide tools for tracking the paracrine signaling with high spatial-temporal precision and implementing in situ real-time, non-destructive detection assays, therefore, enabling extraction of mechanistic information rather than phenotypic information. However, despite the rapid development in this technology, integration of the immune system into OOC devices stays among the least navigated tasks, with immune cells still the major missing components in the developed models. This is mainly due to the complexity of the immune system and the reductionist methodology of the OOC modules. Dedicated research in this field is demanded to establish the understanding of mechanism-based disease endotypes rather than phenotypes. Herein, we systemically present a synthesis of the state-of-the-art of immune-cantered OOC technology. We comprehensively outlined what is achieved and identified the technology gaps emphasizing the missing components required to establish immune-competent OOCs and bridge these gaps.
Subject(s)
Lab-On-A-Chip Devices , Microphysiological SystemsABSTRACT
Colorectal cancer (CC) is one of the common causes of cancer-related deaths around the globe. Identification of a novel biomarker for CC is of paramount importance for early diagnostics and reducing its mortality. Among the most promising biomarker candidates, exosomes hold great potential for cancer diagnosis, management, and treatment. Exosomes are extracellular vesicles secreted from cells and they contribute to the intercellular communication, immune response and the pathogenesis of many diseases including cardiovascular diseases, neurodegenerative diseases, and cancer. Several methods have been developed/utilized for exosome isolation and purification. However, these methods are time-consuming and have low purification efficiency. In this work, we developed the "apta-magnetic biosensor" platform for isolation, purification and detection of exosomes from cell culture. Anti-CD63 aptamer, which is conjugated to the surface of magnetic nanobeads, was used as a recognition element. A dynamic separation system was used which employs a transverse magnetic field along a microfluidic channel. The channel was exposed to an alternate magnetic field which imposes alternate magnetic force onto the magnetic bead-exosome complex. The combination of the fluid flow and magnetic force generates several "alternate trapping and releasing" events under continuous-flow conditions with each event representing a washing cycle. The graphene coated onto the surface of the magnetic nanobeads was used as a quencher for the fluorescently labeled aptamer (OFF state) in the absence of the target. Upon the addition of CD63 target protein, the aptamer dissociates from the graphene and binds to the target hence increasing the fluorescence intensity (ON state). A calibration plot of variable concentrations of exosomes vs fluorescence intensity was obtained and the detection limit was calculated as 1457 particles/mL. The specificity of the sensor was tested using closely associated proteins. The results showed that the aptamagnetic isolation, pre-concentration of exosomes and quantification demonstrate great potential for various clinical applications.
Subject(s)
Biosensing Techniques , Colorectal Neoplasms , Exosomes , Graphite , Humans , Lab-On-A-Chip Devices , Oligonucleotides , Colorectal Neoplasms/diagnosisABSTRACT
A versatile and reconfigurable microfluidic chip has been fully in-house fabricated and tested for immune cell culture, activation, and quantification of multi-cytokine secretion. The chip comprises three vertically stacked fluidic layers for perfusion, cell culture and cytokine capture, and quantification, respectively. The perfused media were separated from the cell culture by employing a biomimetic membrane as a model of the intestinal epithelial layer. Time-resolved detection and quantification of several secreted cytokines were enabled by an array of parallel channels, which are interfaced with the cell culture by a porous membrane. Each channel hosts magnetic beads conjugated with a specific antibody against the cytokine of interest. Magnetic bead-assisted agitation enables homogenization of the cell culture supernatant and perfusion of the cytokines through the bottom immune assay channels. As a proof of concept, THP-1 monocytic cells and their induced macrophages were used as a model of immune-responsive cells. The cells were sequentially stimulated by lipopolysaccharides and two dietary supplements, namely, docosahexaenoic acid (DHA) and curcumin, which are known to possess inflammasome-modulating activity. Both DHA and curcumin have shown anti-inflammatory effects by downregulating the secretion of TNFα, IL-6, IL-1ß, and IL-10. Treatment of the cells with DHA and curcumin together lowered the TNFα secretion by â¼54%. IL-6 secretion was lowered upon cell treatment with curcumin, DHA, or DHA and curcumin co-treatment by 69%, 78%, or 67%, respectively. IL-1ß secretion was lowered by 67% upon curcumin treatment and 70% upon curcumin and DHA co-treatment. IL-10 secretion was also lowered upon treating the cells with DHA, curcumin, or DHA and curcumin together by 7%, 53%, or 54%, respectively. The limit of the detection of the assay was determined as 25 pg/ml. Four cytokine profiling was demonstrated, but the design of the chip can be improved to allow a larger number of cytokines to be simultaneously detected from the same set of cells.
ABSTRACT
Snakebite is a neglected tropical disease that causes considerable death and disability in the tropical world. Although snakebite can cause a variety of pathologies in victims, haemotoxic effects are particularly common and are typically characterised by haemorrhage and/or venom-induced consumption coagulopathy. Antivenoms are the mainstay therapy for treating the toxic effects of snakebite, but despite saving thousands of lives annually, these therapies are associated with limited cross-snake species efficacy due to venom variation, which ultimately restricts their therapeutic utility to particular geographical regions. In this study, we sought to explore the potential of ssDNA aptamers as toxin-specific inhibitory alternatives to antibodies. As a proof of principle model, we selected snake venom serine protease toxins, which are responsible for contributing to venom-induced coagulopathy following snakebite envenoming, as our target. Using SELEX technology, we selected ssDNA aptamers against recombinantly expressed versions of the fibrinogenolytic SVSPs ancrod from the venom of C. rhodostoma and batroxobin from B. atrox. From the resulting pool of specific ssDNA aptamers directed against each target, we identified candidates that exhibited low nanomolar binding affinities to their targets. Downstream aptamer-linked immobilised sorbent assay, fibrinogenolysis, and coagulation profiling experiments demonstrated that the candidate aptamers were able to recognise native and recombinant SVSP toxins and inhibit the toxin- and venom-induced prolongation of plasma clotting times and the consumption of fibrinogen, with inhibitory potencies highly comparable to commercial polyvalent antivenoms. Our findings demonstrate that rationally selected toxin-specific aptamers can exhibit broad in vitro cross-reactivity against toxin isoforms found in different snake venoms and are capable of inhibiting toxins in pathologically relevant in vitro and ex vivo models of venom activity. These data highlight the potential utility of ssDNA aptamers as novel toxin-inhibiting therapeutics of value for tackling snakebite envenoming.
Subject(s)
Disseminated Intravascular Coagulation , Snake Bites , Antivenins/pharmacology , Antivenins/therapeutic use , Disseminated Intravascular Coagulation/drug therapy , Hemorrhage/drug therapy , Humans , Snake Bites/complications , Snake Venoms/toxicityABSTRACT
Two-dimensional carbon nanomaterials have been commonly employed in the field of biosensors to improve their sensitivity/limits of detection and shorten the analysis time. These nanomaterials act as efficient transducers because of their unique characteristics, such as high surface area and optical, electrical, and magnetic properties, which in turn have been exploited to create simple, quick, and low-cost biosensing platforms. In this review, graphene and two-dimensional carbon material-based fluorescent biosensors are covered between 2010 and 2021, for the detection of different human viruses. This review specifically focuses on the new developments in graphene and two-dimensional carbon nanomaterials for fluorescent biosensing based on the Förster resonance energy transfer (FRET) mechanism. The high-efficiency quenching capability of graphene via the FRET mechanism enhances the fluorescent-based biosensors. The review provides a comprehensive reference for the different types of carbon nanomaterials employed for the detection of viruses such as Rotavirus, Ebola virus, Influenza virus H3N2, HIV, Hepatitis C virus (HCV), and Hepatitis B virus (HBV). This review covers the various multiplexing detection technologies as a new direction in the development of biosensing platforms for virus detection. At the end of the review, the different challenges in the use of fluorescent biosensors, as well as some insights into how to overcome them, are highlighted.