ABSTRACT
Objective - to develop the form of the drug reservoir to hold the vegetable oils under the basis of the prosthesis. The research was conducted on the Bench PMMA samples. The comparison group consisted of smooth plate PMMA. Two study groups were PMMA plates with grooves on one side of a square with sides of 2 mm and depth of channel - 1 mm. The third group consisted of the experimental plate with diamond-shaped notches with the same parameters. The lowest value of the stress in the plate having a rhombic grid, they are 54% less than in the smooth plate and 37% less than in the plate with a square lattice (the best strength characteristics in a rhombic plate with grille). Equivalent move from the plate with a rhombic lattice is less than an order of magnitude than that of a smooth plate and by 5.8% more than at the plate with a square lattice, which indicates good performance design plasticity with rhombic grid. Basis with the rhombic lattice on the surface has the best record on the stress-strain state in comparison with other models considered (smooth plate with a square lattice plate).