Cellular responses to 3D printed dental resins produced using a manufacturer recommended printer versus a third party printer.

PURPOSE: The aim of this study was to evaluate the influence of different 3D dental resins, using a manufacturer recommended printer and a third-party printer, on cellular responses of human gingival cells. MATERIALS AND METHODS: Three NextDent resins (Denture 3D+, C&B MFH and Crowntec) were used to produce specimens on printers NextDent 5100 (groups ND, NC and NT, respectively) and Phrozen Sonic Mini 4K (groups PD, PC and PT, respectively). Human gingival fibroblasts were cultured and biocompatibility was evaluated on days 1, 3 and 7. IL-6 and IL-8 concentrations were evaluated at 3 days using ELISA. Surface roughness was evaluated by a contact profilometer. SEM and fluorescence micrographs were analyzed at days 1 and 7. Statistical analyses were performed using SPSS and mean differences were tested using ANOVA and post-hoc Tukey tests (P < .05). RESULTS: There was an increase in cellular viability after 7 days in groups PC and PT, when compared to group PD. ND group resulted in higher concentration of IL-6 when compared to PT group. SEM and fluorescence micrographs showed less adhesion and thinner morphology of fibroblasts from group PD. No significant differences were found regarding surface roughness. CONCLUSION: The use of different printers or resins did not seem to influence surface roughness. NextDent 5100 and Phrozen Sonic Mini 4K produced resins with similar cellular responses in human gingival fibroblasts. However, Denture 3D+ resin resulted in significantly lower biocompatibility, when compared to C&B MFH and Crowntec resins. Further testing is required to support its long-term use, required for complete dentures.

Hyaluronic acid-based gels for oral application: Comparison of in vitro effects on gingival cells and bacteria.

Purpose: This study aimed to evaluate the cytotoxic effects of different topical hyaluronic acid-based gels on human gingival fibroblasts and oral bacteria. Methods: Four different hyaluronate gels - Bexident® Aftas (BA), GUM® AftaClear (AfC), Gengigel®(G), Aloclair® Plus (AlC) and a chlorhexidine gel - Bexident®Gums(BG) were selected. Human gingival fibroblasts (HGF) were seeded in 48-well plates with different gel/culture medium concentrations (v/v%) and cell viability was evaluated at 1 and 3 days of culture. Cell morphology was assessed, and alterations graded according to ISO 10993-5:2009(E). Streptococcus oralis CECT 907T colony was, seed on 48-well plate or spread onto the blood agar plates and exposed to the different gel's concentration. The optical density (OD) was assessed, and the diameter of the inhibition zone was measured (mm). Results: BA and G elicited reduced HGF cytotoxicity, followed by AfC. AlC and BG were cytotoxic at concentrations up to 3% for all exposure times. PCM images of HGF showed moderate-to-severe alterations for AlC and BG and slight to mild changes, for BA, AfC and G. The highest antibacterial activity against S.oralis was observed on AlC and AfC, and no antibacterial activity was observed for BA and G. Inhibitory effect in sessile colonies was only observed in AlC and BG. Conclusions: AlC demonstrated superior antibacterial activities against S.oralis but a higher cytotoxic potential in HGF. BA and G presented the lowest cytotoxicity with little to no antibacterial effect. AfC demonstrated bacteriostatic effects and low cytotoxicity on HGF.

Cie L*A*B* Values in VITA Classical and VITA 3D Master by Two Dental Spectrophotometers.

PURPOSE: To compare the CIE L*a*b* values of two different dental shade guides using two shade-matching spectrophotometers. MATERIALS AND METHODS: SpectroShade Micro (SS) and Easyshade (ES) (VITA Zahnfabrik) were tested. One calibrated operator performed 30 measurements of each tab from three batches of the two guides, VITA Classical (VC) and VITA 3D Shade Master (VM). Receiver operating characteristic (ROC) curves and intraclass coefficients (ICC) between the different batches were calculated. Results were given as mean and SD of the L*a*b* values and the respective color differences according to the CIEDE 2000 formula (ΔE00) for each of the shade tabs in the two spectrophotometers and then analyzed with independent student t test (α = .05). RESULTS: A total of 1,440 and 2,610 measurements for VC and VM, respectively, were performed per spectrophotometer. There were statistically significant differences between the two devices for all L*a*b* values, with the exception of: L* for 3R1.5; a* for 2R1.5, 3L1.5, 2L2.5, 3M2, 3L2.5, 4L1.5, and 4L2.5; and b* for D3, 1M2, and 3M2. When assessing the same shade guide, differences in ΔE00 were detected between devices above the acceptability threshold (AT) (ΔE00 ≥ 1.8) for all shade tabs except for VC (C1, C2, D3, A3.5, C3, and A4) and VM (4M1, 3R2.5, 4L2.5, and 4M3). The overall mean of the interdevice ΔE00 was 2.2 ± 1.0 for VC and 2.5 ± 1.0 for VM. CONCLUSIONS: The two dental spectrophotometers presented high ICC and ROC values, which validates their indication as auxiliary tools. However, there are discrepancies in the hues D (VC) and R (VM) with interdevice variability when evaluated for the L*a*b* component. Int J Prosthodont 2023;36:e38-e52.

Modification of Zirconia Implant Surfaces by Nd:YAG Laser Grooves: Does It Change Cell Behavior?

The aim of this study was to evaluate gingival fibroblasts and human osteoblasts' response to textured Nd:YAG laser microgrooves, with different dimensions, on zirconia implant surfaces. A total of 60 zirconia disks (8 mm in diameter and 2 mm in thickness) were produced and divided between four study groups (N = 15): three laser-textured (widths between 125.07 ± 5.29 µm and 45.36 ± 2.37 µm and depth values from 50.54 ± 2.48 µm to 23.01 ± 3.79 µm) and a control group without laser treatment. Human osteoblasts and gingival fibroblasts were cultured on these surfaces for 14 days. FEG-SEM (Field Emission Gun-Scanning Electron Microscope) images showed cellular adhesion at 24 h, with comparable morphology in all samples for both cell types. A similar cell spreading within the grooves and in the space between them was observed. Cell viability increased over time in all study groups; however, no differences were found between them. Additionally, proliferation, ALP (Alkaline phosphatase) activity, collagen type I, osteopontin and interleukin levels were not significantly different between any of the study groups for any of the cell types. Analysis of variance to compare parameters effect did not reveal statistically significant differences when comparing all groups in the different tests performed. The results obtained revealed similar cell behavior based on cell viability and differentiation on different microtopographic laser grooves, compared to a microtopography only established by sandblasting and acid-etching protocol, the reference surface treatment on zirconia dental implants.

Peri-implant cell response on groove and pore-textured zirconia surfaces.

OBJECTIVES: This study aimed to assess the independent influence of grooves and pores texturized by milling on gold-standard zirconia implant surfaces. METHODS: Milled groove and pore textured with equivalent width, depth, and spacing on zirconia discs were produced using press and sintering techniques. All samples were sandblasted and acid-etched (SBAE), and untextured discs were used as controls. Osteoblasts and fibroblasts were cultured on discs for 14 days. Field emission gun-scanning electron microscopy (FEG-SEM) was used to observe cellular adhesion and morphology. Cell viability and proliferation assays were performed. Additionally, alkaline phosphatase activity, collagen type I, and osteopontin were evaluated at pre-defined time points. Results are presented as mean and standard deviation (SD), group comparisons were tested using one-way ANOVA (Tukey's post-hoc), and significance was set at P < 0.05. RESULTS: FEG-SEM images revealed cellular adhesion at 24 h in all samples with differences in distribution. Although both cell lines showed increased cell viability and differentiation cell markers such as collagen and osteopontin over time, statistically significant differences between groups were found in none of the quantitative study variables (P > 0.05). CONCLUSION: The results suggest similar cellular behavior between different patterns with similar dimensions and between them and microtopography by SBAE protocol currently used as the gold-standard for zirconia dental implants. The addition of pore and groove microtextures to the gold-standard zirconia dental implant surfaces treated with SBAE does not seem to be an asset in the cellular behavior of the hard and soft tissue cells.

Laser surface treatment on Yttria-stabilized zirconia dental implants: Influence on cell behavior.

Yttria-stabilized zirconia (YSZ) is being proposed as an alternative material to Titanium for dental implants due to its aesthetic and biocompatibility properties. However, is it yet to define the optimal surface treatment to improve YSZ bioactivy. Texturization is a promising approach, but the biological role of patterned YSZ surfaces in cell cultures is yet to be determined. Thus, cellular behavior of osteoblasts and fibroblasts in contact with groove-texturized YSZ surfaces was investigated. YSZ discs were groove-textured by conventional milling and Nd:YAG laser. All samples including control were sandblasted and acid-etched. Human osteoblasts and fibroblasts were cultured on discs for 14 days. Morphology and cellular adhesion were observed. Cell viability, interleukin-1ß, osteopontin, collagen type I prodution, alkaline phosphatase activity, and interleukin-8 were measured. YSZ texturization by conventional milling improved osteoblasts viability and differentiation when compared to laser texturization. Fibroblasts behavior did not seem to be influenced by the texturing technique. Compared to sandblasting and acid etching currently used as gold standard for zirconia dental implants no superiority of macrotexturization was found.

Bioactive-Enhanced Polyetheretherketone Dental Implant Materials: Mechanical Characterization and Cellular Responses.

The aim of this study was to characterize the mechanical properties of a bioactive-modified polyetheretherketone (PEEK) manufacturing approach for dental implants and to compare the in vitro biological behavior with titanium alloy (Ti6Al4V) as the reference. PEEK, PEEK with 5% hydroxyapatite (HA), PEEK with 5% beta-tricalcium phosphate (ßTCP), and Ti6Al4V discs were produced using hot pressing technology to create a functionally graded material (FGM). Surface roughness values (Ra, Rz), water contact angle, shear bond strength, and Vickers hardness tests were performed. Human osteoblasts and gingival fibroblasts bioactivity was evaluated by a resazurin-based method, alkaline phosphatase activity (ALP), and confocal laser scanning microscopy (CLSM) images of fluorescent-stained fibroblasts. Morphology and cellular adhesion were confirmed using field emission gun-scanning electron microscopy (FEG-SEM). Group comparisons were tested using analysis of variance (Tukey post hoc test), α = .05. All groups presented similar roughness values (P > .05). Ti6Al4V group was found to have the highest contact angle (P < .05). Shear bond strength and Vickers hardness of different PEEK materials were similar (P > .05); however, the mean values in the Ti6Al4V group were significantly higher when compared with those of the other groups (P < .05). Cell viability and proliferation of osteoblast and fibroblast cells were higher in the PEEK group (P < .05). PEEK-ßTCP showed the highest significant ALP activity over time (P < .05 at 14 days of culture). An enhanced bone and soft-tissue cell behavior on pure PEEK was obtained to the gold standard (Ti6Al4V) with equivalent roughness. The results substantiate the potential role of chemical composition rather than physical properties of materials in biological responses. The addition of 5% HA or ßTCP by FGM did not enhance PEEK mechanical properties or periodontal cell behavior.

Laser Nd:YAG patterning enhance human osteoblast behavior on zirconia implants.

Zirconia has been regarded as a promising material for dental implants, and Nd:YAG laser treatment has been proposed as a potential strategy to improve its bioactivity. The main aim of the present study was to evaluate the in vitro behavior of human fetal osteoblasts in contact with laser-textured zirconia implant surfaces assessing the effect of different texture patterns, spacing between laser passes and number of laser passes. Zirconia discs were produced and treated with Nd:YAG laser according to test group variables: texture (microgrooves and micropillar array), distance between surface features (25 µm, 30 µm and 35 µm), and laser passes [1, 2, 4, and 8]. Untextured sandblasted and acid-etched zirconia discs (SBAE) were used as controls. Human osteoblasts (hFOB 1.19) were cultured for 14 days on test and control samples. Morphology and cellular adhesion were observed using scanning electron microscopy (SEM). Cell viability and proliferation were evaluated at 1, 3, 7, and 14 days using a commercial resazurin-based method. Collagen type I was evaluated at 3 days using ELISA. Alkaline phosphatase (ALP) activity was evaluated at 7 days using a colorimetric enzymatic technique. Group comparisons were tested using ANOVA or Mann-Whitney test (Tukey's post hoc) using statistical software, and significance was set at p < 0.05. Cell viability and proliferation increased over time for all groups with statistically higher values for laser-textured groups when compared with control at 7 and 14 days in culture (p < 0.05). Collagen type I levels were higher for study groups (p < 0.05) when compared with control group. No statistically differences were detected for ALP activity levels between texture and control groups (p > 0.05). The results suggest that laser-machined zirconia implant surfaces may benefit biological osteoblast response. However, the type of texture, spacing at the range of 25-35 µm, and number of laser passes did not seem to be relevant variables.

Patient-related outcomes in Sjögren syndrome treated with stimulants of salivary secretion: Randomized clinical trial.

OBJECTIVES: To investigate the impact of gustatory stimulants of salivary secretion (GSSS) on Sjögren's syndrome patients' self-perception of xerostomia, oral health-related quality of life (OHRQoL) and salivary secretion. METHODS: A total of 110 Sjögren's syndrome patients were randomly allocated to be treated with either a malic acid lozenge or a citric acid mouthwash and then crossed over. Before and after the interventions, the Xerostomia Inventory 5 (SXI-5-PL) and the Oral Health Impact Profile (OHIP-14-PT) questionnaires (both in the Portuguese language) were administered to patients. Unstimulated, mechanical and gustatory-stimulated salivary flows were determined. Repeated measures and between-subject analyses were performed. Statistical significance was set at 5%. RESULTS: After the intervention and within each group, both GSSS elicited a reduction in the SXI-5-PL and OHIP-14-PT scores and an increase in salivary output, significant in the malic acid lozenge group. The malic acid treatment resulted in a greater effect size and percentage improvement than citric acid mouthwash. The malic acid lozenge also produced a significant greater salivary output than the citric acid rising solution. CONCLUSIONS: In Sjögren's syndrome patients, lozenges containing malic acid increased saliva production and xerostomia relief, resulting in improved quality of life.

Soft tissue replication in single unit implant impressions-A three dimensional clinical study.

OBJECTIVE: Comparison of soft tissue replication between conventional and digital impressions for definitive single unit implant rehabilitation in the esthetic zone. MATERIALS AND METHODS: Six patients were recruited according to inclusion criteria for this cross-over pilot study and submitted to a conventional silicone implant impression with customized coping and a digital impression with an intraoral scanner. Stereolithography files obtained from the same patient were superimposed with appropriate software and trueness evaluated between methods at predetermined locations (56 in hard and soft tissues and 18 in the emergence profile, per patient). Results were presented as mean root mean square (RMS) ± 95% confidence interval and effect size calculated with Hedges' g ± 95%. Mann-Whitney and Kruskal-Wallis were performed when appropriate and α was set at .05. RESULTS: Trueness between methods equated to 51.08[45.68;56.47] µm and 60.46[52.29;68.62] µm in hard and soft tissues, respectively. Soft tissue replication by intraoral scanner acquisition corresponded to a statistically significant RMS of 243.89[209.15;278.63] µm equating to a Hedges' g of 1.52[1.22;1.82] which corresponded to a large effect size. CONCLUSIONS: The proposed method could be considered for soft tissues assessment and the results suggest that intraoral impression techniques produce statistically significant changes in peri-implant soft tissue replication, although below the clinically detectable threshold. CLINICAL SIGNIFICANCE: The proposed technique allows for the 3D determination of peri-implant tissues changes in digital models with higher sensitivity than visual techniques, thus presenting itself as a promising alternative in clinical studies and that the use of an intraoral scanner obtained significant differences in the soft tissue emergence profile replication when compared with the gold standard.

Hard and Soft Tissue Cell Behavior on Polyetheretherketone, Zirconia, and Titanium Implant Materials

PURPOSE: The aim of this study was to characterize and compare the behavior of human osteoblasts and human gingival fibroblasts in contact with polyetheretherketone (PEEK), zirconia, and titanium implant surface materials. MATERIALS AND METHODS: PEEK, yttria-stabilized zirconia (YTZP), and titanium discs were produced under appropriate and similar conditions to achieve controlled surface features. Human osteoblasts and human gingival fibroblasts were cultured on discs for 14 days. Cell viability and proliferation were evaluated using a resazurin-based method. Morphology and cellular adhesion were observed using field emission gun-scanning electron microscopy (FEG-SEM). Alkaline phosphatase (ALP) activity and bone cell mineralization were evaluated on osteoblasts. Confocal laser scanning microscopy (CLSM) images of fluorescent-stained fibroblasts were obtained at 7 and 14 days of the culture. Results were presented as mean and standard deviation (SD). Group comparisons were tested using analysis of variance (ANOVA) (Tukey's post hoc) with appropriate statistical software, and significance was set at P < .05. RESULTS: Cell viability and proliferation were higher in PEEK and YTZP groups compared with titanium on osteoblast cells (P < .05, all time points) and on fibroblasts (P < .05, 7 and 14 days). All groups showed an increase in ALP activity over time, which was not significant. Mineralization patterns demonstrated an increase in mineral content over time, which was more apparent in the YTZP group. Cell spreading was more evident on PEEK and YTZP specimens. CONCLUSION: The results suggest increased adhesion, viability, and proliferation of osteoblasts and gingival fibroblasts on zirconia and PEEK surfaces compared with titanium. These results are correlated with the increased wettability of these materials.

Validity and reliability of a Portuguese version of the Summated Xerostomia Inventory-5.

OBJECTIVES: The aim of this study was to validate and determine the reliability of the Portuguese version of the Summated Xerostomia Inventory. BACKGROUND: Many conditions such as head and neck radiation, autoimmune diseases or polypharmacy are characterised by hyposalivation which can affect oral and systemic quality of life. As such, this condition must be assessed, and the English version of the Xerostomia Inventory has been increasingly used to determine the severity of dry mouth perception. MATERIALS AND METHODS: This was a descriptive cross-sectional study, which employed volunteers suffering from hyposalivation after local ethical committee clearance. Each patient signed an informed consent and responded to the Portuguese version of the questionnaire in the form of an interview. This was repeated again after 2 weeks. A standard single question provided a validity check. Data were analysed using Cronbach's α to test its reliability and total and interitem correlation, and intraclass correlation to determine its internal consistency and test-retest reliability. Significance was set at .05. RESULTS: A sample of 103 volunteers was recruited. Cronbach's α was .84 and .87 for the first and second test administrations, respectively. The intraclass correlation coefficient value for the test-retest reliability was .93, and scores for the individual items ranged from .79 to .90. The correlation between the total score of the questionnaire and standard single dry mouth question was .66, indicating a very good correlation. CONCLUSION: Demonstrating excellent psychometric properties, the Summated Xerostomia Inventory (Portuguese Version) is a valid tool for quantifying Xerostomia in a dry mouth-afflicted population.

Ceramic-Veneered Zirconia Frameworks in Full-Arch Implant Rehabilitations: A 6-Month to 5-Year Retrospective Cohort Study.

PURPOSE: This was a retrospective cohort study designed to evaluate the clinical performance of ceramic-veneered zirconia frameworks. MATERIALS AND METHODS: Patients were recruited according to defined inclusion criteria. All patients were checked every 4 months from the time of definitive rehabilitation. At the end of 2013, all patients were rescheduled and rechecked for study purposes. The restorative procedures assessment was performed by previously established methods. The primary outcomes were the survival and success rates of the prosthesis. Descriptive statistics were used for the patient's demographics, implant distribution, and occurrence of complications. To study the survival and success of the prostheses, a Cox Regression analysis was used with a model constructed in a forward conditional stepwise mode. Predictive variables were included in the model, and adjusted survival curves were obtained for each outcome. RESULTS: From 2008 to 2013, 75 patients were rehabilitated with 92 implant-supported, screw-retained, full-arch ceramic-veneered zirconia framework rehabilitations. The range of follow-up was between 6 months and 5 years. From the 92 full implant-supported screw-retained full-arch rehabilitations, Cox regression analysis indicated that within a 5-year time frame, the probability of framework fracture, major chipping, minor chipping, or any of the former combined to occur was 17.6%, 46.5%, 69.2%, and 90.5%, respectively. CONCLUSION: Results suggest zirconia as a suitable material for framework structure in implant-supported, full-arch rehabilitations. However, it experiences a high incidence of technical complications, mainly due to ceramic chipping. Further clinical studies should aim to ascertain the effects of clinical features and manufacturing procedures on the survival rates of these prostheses.

Kinetic release of hydrogen peroxide from different whitening products.

The objective of this in vitro study was to evaluate the kinetics of hydrogen peroxide (HP) release from five different bleaching products: VivaStyle® 10% fitted tray gel, VivaStyle® 30% in-office bleaching gel, VivaStyle® Paint-On Plus paint-on bleaching varnish, Opalescence PF® 10% carbamide peroxide gel and Trèswhite Supreme™ 10% HP gel. Each product was firstly titrated for its HP content by a described method. HP release kinetics was assessed by a modified spectrophotometric technique. One sample t test was performed to test for differences between the manufacturers' claimed HP concentrations and the titrated HP content in the whitening products. Analysis of variance plus Tamhane's post hoc tests and Pearson correlation analysis were used as appropriate. Values of P < 0.05 were taken as significant. Titrated HP revealed an increased content when compared to the manufacturer's specifications for all the products tested (P < 0.05), although only products from one manufacturer produced significantly higher results. All products presented a significant (P < 0.05) and sustained release of HP. However, the product with paint-on cellulose-based matrix resulted in significantly (P < 0.05) faster kinetics when compared to other products tested. These results are consistent with manufacturers' reduced recommended application times. The results of this study suggest that modifying the matrix composition may be a viable alternative to HP concentration increase, since this may result in faster release kinetics without exposure to high HP concentrations.

Hydrogen peroxide release kinetics into saliva from different whitening products: a double-blind, randomized clinical trial.

The objective of this study is to compare salivary hydrogen peroxide (HP) release kinetics and potential toxicity of systemic exposure of four different whitening products. A double-blind, randomized controlled trial was conducted in a Portuguese dental faculty clinic. Two hundred forty volunteers were randomized to eight intervention groups. Participants were randomly assigned to receive active or placebo applications of one of four different products: Opalescence 10% PF™ (OPL), Vivastyle® 10%™ (VS10%), Vivadent Paint On Plus™ (PO+), and Trés White Supreme™ (TWS). Saliva collection was obtained by established methods at different times. The HP salivary content was determined by a photometric method. Salivary HP variations, total amount of salivary HP, and counts of subjects above the safe daily HP dose were the main outcome measures. All whitening systems significantly released HP to the saliva when compared to placebo, and all showed different release kinetics. The adaptable tray system (TWS) presented a risk increase of 37% [20-54%, 95% confidence interval] when compared to the other systems. The use of an adaptable tray whitening system with higher concentration of HP increases the toxicity potential.

Effects of gustatory stimulants of salivary secretion on salivary pH and flow in patients with Sjögren's syndrome: a randomized controlled trial.

OBJECTIVES: To compare salivary pH changes and stimulation efficacy of two different gustatory stimulants of salivary secretion (GSSS) in patients with primary Sjögren syndrome. SETTING: Portuguese Institute for Rheumatological Diseases. DESIGN: Double-blind randomized controlled trial. SUBJECTS: Eighty patients were randomized to two intervention groups. Sample size was calculated using an alpha error of 0.05 and a beta of 0.20. MATERIALS AND METHODS: Participants were randomly assigned to receive a new GSSS containing a weaker malic acid, fluoride and xylitol or a traditionally citric acid-based one. Saliva collection was obtained by established methods at different times. The salivary pH of the samples was determined with a pH meter and a microelectrode. MAIN OUTCOME MEASURES: Salivary pH variations and counts of subjects with pH below 4.5 for over 1 min and stimulated salivary flow were the main outcome measures. RESULTS: Both GSSS significantly stimulated salivary output without significant differences between the two groups. The new gustatory stimulant of salivary secretion presented an absolute risk reduction of 52.78% [33.42-72.13 (95% CI)] when compared with the traditional one. CONCLUSIONS: In Xerostomic Primary Sjögren syndrome patients, gustatory stimulants of salivary secretion based on acid mail only with fluoride and xylitol present similar salivary stimulation capacity when compared to citric acid-based ones, besides significantly reducing the number of salivary pH drops below 4.5. This could be related to a diminished risk for dental erosion and should be confirmed with further studies.

A novel technique for in-office bleaching with a 6% hydrogen peroxide paint-on varnish.

In-office techniques for bleaching vital teeth are effective and expedient, but because they require the use of elevated concentrations of hydrogen peroxide-based agents, which are caustic and potentially toxic, they are found to be less appealing by practitioners compared with home whitening procedures. In this article we propose a new technique for in-office whitening of vital teeth using a 6% hydrogen peroxide paint-on whitening varnish, which enables the whitening procedure to be more economic and user-friendly, as well as less toxic and time consuming, compared with traditional in-office bleaching. A total of six patients with no caries or restorations in the maxillary and mandibular anterior teeth were selected for this study. Ten-minute applications of the paint-on whitening varnish were performed repeatedly with each patient for up to 1 hour and then repeated 1 week later. Initial shades were recorded with a Vita scale guide, and photographs were taken at the beginning and end of the study. A questionnaire assessing clinical parameters and patient satisfaction was performed. A change of 7 to 13 values on the Vita scale was observed in all cases. There were no reports of tooth sensitivity, and overall patient satisfaction was achieved. In-office bleaching with the use of paint-on varnishes seems to be effective, safe, and well accepted by patients, offering a viable alternative to high-peroxide-concentration in-office procedures.