Evaluation of the stability of polyamines in human serum at different storage temperatures using capillary electrophoresis with indirect ultraviolet detection.

Polyamines are low molecular weight compounds that are present in all living organisms. They are related to the pathological processes, and have been studied as biomarkers for tumor progression, being analyzed in patients' biological fluids. However, polyamines can undergo degradation in serum samples, depending on storage conditions, which impairs their quantification in these matrices. In this work, capillary electrophoresis using indirect ultraviolet detection has been developed and applied to evaluate the stability of polyamines [cadaverine (Cad), putrescine (Put), spermine (Spm), and spermidine (Spd)] in human serum at different storage temperatures. By using this method, Cad, Put, Spm, and Spd were separated in less than 4 min. The range of the correlation coefficients was 0.993-0.998. The corresponding limits of detection and quantification were as follows (in mg L-1 ): Spm: 0.209 and 0.697; Spd: 0.165 and 0.549; Put: 0.189 and 0.632; Cad: 0.125 and 0.417. Besides, the coefficient of variation was lower than 1% for all analytes and the recovery was 92%-110%. The method was successfully applied for polyamines spiked in human serum samples from healthy people. The results showed that the degradation of polyamines was lower in samples stored in a freezer (-20°C).

Targeted analysis reveals alteration in pathway in 5p minus individuals.

Cri du Chat or 5p minus (5p-) syndrome is characterized by a deletion located on the chromosome 5 short (-p) arm and has an incidence rate of 1 in 50,000 individuals worldwide. This disease manifests in disturbances across a range of systems biochemicals. Therefore, a targeted metabolomics analysis was evaluated in patients with 5p- syndrome to help unravel the biochemical changes that occur in this disease. Urine samples were collected from people of both sexes aged 1-38 years old and analyzed by ultra-performance liquid chromatography coupled to mass spectrometry. Student' statistical test, metabolomic pathway analysis and metabolite set enrichment analysis were applied to the data. Alterations of some amino acids and amine biogenics levels were found in Cri du Chat Syndrome individuals. The alteration of most of these metabolites is associated with energy recuperation and glycolysis. In general, we found the catabolism of some metabolic pathways to be affected in 5p- patients.

Effects of Diacetyl Flavoring Exposure in Mice Metabolism.

Diacetyl is a flavoring that imparts a buttery flavor to foods, but the use or exposure to diacetyl has been related to some diseases. We investigated the effect of oral intake of diacetyl in male and female C57/Bl mice. We performed a target metabolomics assay using ultraperformance liquid chromatography paired with triple quadrupole mass spectrometry (UPLC-MS/MS) for the determination and quantification of plasmatic metabolites. We observed alterations in metabolites present in the urea and tricarboxylic acid (TCA) cycles. Peroxynitrite plasmatic levels were evaluated by a colorimetric method, final activity of superoxide dismutase (SOD) was evaluated by an enzymatic method, and mouse behavior was evaluated. Majority of the assay showed differences between control and treatment groups, as well as between genders. This may indicate the involvement of sex hormones in the regulation of a normal metabolic profile, and the implication of sex differences in metabolite disease response.

Profiles of amino acids and biogenic amines in the plasma of Cri-du-Chat patients.

Cri-du-chat syndrome (CDCS) is a rare innate disease attributed to chromosome 5p deletion characterized by a cat-like cry, craniofacial malformation, and altered behavior of affected children. Metabolomic analysis and a chemometric approach allow description of the metabolic profile of CDCS as compared to normal subjects. In the present work, UHPLC/MS was employed to analyze blood samples withdrawn from CDCS carriers (n=18) and normal parental subjects (n=18), all aged 0-34 years, aiming to set up a representative CDCS profile constructed from 33 targeted amino acids and biogenic amines. Methionine sulfoxide (MetO) was of particular concern with respect to CDCS redox balance. Increased serotonin (3-fold), methionine sulfoxide (2-fold), and Asp levels, and a little lower Orn, citrulline, Leu, Val, Ile, Asn, Gln, Trp, Thr, His, Phe, Met, and creatinine levels were found in the plasma of CDCS patients. Nitrotyrosine and Trp did not differ in normal and CDCS individuals.The accumulated metabolites may reflect, respectively, disturbances in the redox balance, deficient purine biosynthesis, and altered behavior, whereas the amino acid abatement in the latter group may affect the homeostasis of the urea cycle, citric acid cycle, branched chain amino acid synthesis, Tyr and Trp metabolism and amino acid biosynthesis. The identification of enzymatic deficiencies leading to the amino acid burden in CDCS is further required for elucidating its molecular bases and eventually propose specific or mixed amino acid supplementation to newborn patients aiming to balance their metabolism.

Optimization of chemometric approaches for the extraction of isorhamnetin-3-O-rutinoside from Calendula officinalis L.

The application of Design of Experiments (DoE) to the determination of optimum conditions for an extraction process relies on the correct selection of mathematical models. The linear model is the one typically used; however, in some cases it does not always have superior performance, ignoring the real nature of the data and its appropriate descriptive model. In order to evaluate the extraction efficiency of isorhamnetin-3-O-rutinoside from flowers of Calendula officinalis L. a multivariate factorial analysis was used. Simulations were conducted using linear, quadratic, full cubic and special cubic models. A Simplex-Centroid design was chosen as it delivered greater precision with only minor errors versus other models tested. Analyses were performed by capillary zone electrophoresis using sodium tetraborate buffer (40mmolL(-1), pH 9.4) containing 10% methanol. The detection was linear over a range of 8.0-50.0mgL(-1) (r(2)=0.996), and the limits of detection (LOD) and quantification (LOQ) for isorhamnetin-3-O-rutinoside were 3.44mgL(-1) and 11.47mgL(-1), respectively. The full cubic model showed the best extraction results, with an error of 3.40% compared to analysis of variance, and a determination coefficient of 0.974. The difference between the responses at the reference point, calculated by the model, and the experimental response, varies around 2.72% for full cubic model. Comparison of the four models showed the full cubic model was the most appropriate one, allowing greater efficiency in the extraction of isorhamnetin-3-O-rutinoside. Selection of the model made it possible to obtain a 60% increase in sensitivity compared to the linear model.

A dry process for production of microfluidic devices based on the lamination of laser-printed polyester films.

A new microfabrication process based on a xerographic process is described. A laser printer is used to selectively deposit toner on a polyester film, which is subsequently laminated against another polyester film. The toner layer binds the two polyester films and allows the blank regions to become channels for microfluidics. These software-outlined channels are approximately 6 microm deep. Approximately twice this depth is obtained by laminating two printed films. The resulting devices were not significantly damaged after 24 h of exposure to aqueous solutions of H3PO4, NaOH, methanol, acetonitrile, or sodium dodecyl sulfate. Electric tests with an impedance analyzer and microchannels filled with KCl solution demonstrated that (1) wide channels suffer from deformation of the top and bottom walls due to the lamination of the polyester films and (2) the toner walls are somewhat porous. Although these drawbacks limit the maximum width of a channel and the minimum distance between two channels, the process is an attractive option to other expensive, laborious, and time-consuming methods for microchannels fabrication. The process has been used to implement devices for electrospray tip and capillary electrophoresis with contactless conductivity detection.