Development of novel montmorillonite-based sustained release system for oral bromopride delivery.

The drug delivery systems are an important strategy of pharmaceutical technology to modulate undesirable properties, increasing efficacy, and reducing the side effects of active pharmaceutical ingredients (API). The sustained release is a type of controlled-release system that provides a suitable drug level in the blood through a slow release rate. An interesting alternative to achieve a controlled release is the application of carrier materials such as polymers, cyclodextrins, and clays. Sodium montmorillonite (Na-MMT) is a biocompatible natural clay that allows the insertion of organic compounds in interlamellar space, owing to its high cation exchange capacity and large internal surface area. Bromopride (BPD) is an aminated compound with antiemetic properties classified as class II (low solubility, high permeability) of the Biopharmaceutical Classification System (BCS). Herein, the aim of the study was the development and investigation of a drug delivery system formed by intercalation of BPD with Na-MMT. The results indicate the successful intercalation of this API with the lamellar silicate, meanwhile, there was no evidence of BPD intercalation in organic montmorillonite. The Na-MMT/BPD molecular complex exhibits a sustained release in performed assays. Molecular dynamics simulations suggested that BPD molecules interact with the montmorillonite layer through ion-dipole interactions and also between BPD molecules, forming hydrogen bonds web into montmorillonite interlayer space. The new drug delivery system showed an alternative to achieve the BPD sustained release, which may improve its pharmacological performance in therapeutic applications.

Evaluation of Dermorphin Metabolism Using Zebrafish Water Tank Model and Human Liver Microsomes.

BACKGROUND: Dermorphin is a heptapeptide with an analgesic potential higher than morphine that does not present the same risk for the development of tolerance. These pharmacological features make dermorphin a potential doping agent in competitive sports and it is already prohibited for racehorses. For athletes, the development of an efficient strategy to monitor for its abuse necessitates an investigation of the metabolism of dermorphin in humans. METHODS: Here, human liver microsomes and zebrafish were utilized as model systems of human metabolism to evaluate the presence and kinetics of metabolites derived from dermorphin. Five hours after its administration, the presence of dermorphin metabolites could be detected in both models by liquid chromatography coupled to highresolution mass spectrometry. RESULTS: Although the two models showed common results, marked differences were also observed in relation to the formed metabolites. Six putative metabolites, based on their exact masses of m/z 479.1915, m/z 501.1733, m/z 495.1657, m/z 223.1073, m/z 180.1017 and m/z 457.2085, are proposed to represent the metabolic pattern of dermorphin. The major metabolite generated from the administration of dermorphin in both models was YAFG-OH (m/z 457.2085), which is the N-terminal tetrapeptide previously identified from studies on rats. CONCLUSION: Its extensive characterization and commercial availability suggest that it could serve as a primary target analyte for the detection of dermorphin misuse. The metabolomics approach also allowed the assignment of other confirmatory metabolites.

A high throughput approach for determination of dermorphin in human urine using liquid chromatography-mass spectrometry for doping control purposes.

Dermorphin is a peptide with analgesic actions similar to morphine, but with greater effect and less potential to cause tolerance. The use of dermorphin has been documented in race horses, and its use in humans has already been reported. Considering the potential advantages from the use of dermorphin over morphine, a method to monitor it, and its main metabolite dermorphin (1-4) in humans becomes necessary for doping control. Here, we present two orthogonal methods for this purpose: a high-throughput liquid chromatography coupled to high-resolution mass spectrometry (HRMS) as an initial testing procedure and liquid chromatography-tandem mass spectrometry (MS/MS) in the selected reaction monitoring (SRM) acquisition mode for a confirmation procedure. For urine samples, pretreatment through a mixed-mode weak cation-exchange solid-phase extraction emerged as an effective approach to extract peptides from the biological sample. For the HRMS analysis, a full-MS scan acquisition mode was selected to detect the exact masses of dermorphin and dermorphin (1-4) at m/z 803.37226 and 457.20816, respectively. The SRM method used in the MS/MS confirmation protocol presented high specificity and sensitivity. The selected product ions for dermorphin were 602.2, 202.1 and 574.3 and for dermorphin (1-4) were 207.1, 223.1, and 235.1. Both methods were evaluated for specificity, repeatability, carryover, matrix effects, and recovery. No carryover and matrix effects were detected. The limit of detection for initial testing procedure and the limit of identification for confirmation procedure was 2.5 ng/ml. Also, specificity and robustness were acceptable for the application. Together, the developed methods proved to be efficient for the analysis of dermorphin and metabolite for human doping control purpose.

Post-marketing assessment of generic tamoxifen in Brazilian breast cancer patients.

Generic formulations of tamoxifen are commonly prescribed to oestrogen receptor-positive breast cancer patients at the Brazilian National Cancer Institute (INCA). We carried out a post-marketing surveillance of the generic tamoxifen formulation in current use at INCA, by comparing plasma concentrations of the parent drug and metabolites obtained with the generic vs the reference formulation. Thirty patients participated in an open-label, bracketed protocol, comprising 3 successive phases of 30-32 days each: the generic formulation was used in phases 1 and 3 and the reference formulation in phase 2. Two blood samples were collected in the last 4 days of each phase, for LC-MS/MS quantification of tamoxifen and metabolites in plasma. The median plasma concentrations (ng/mL) for the reference formulation were as follows: tamoxifen, 135.0 (CI 95% 114.2-155.8); endoxifen, 35.3 (30.0-40.8); and 4-hydroxytamoxifen, 4.8 (4.2-5.4). The endoxifen/tamoxifen plasma concentration ratio was 0.27 (0.21-0.25). ANOVA detected no statistically significant difference in plasma concentrations of tamoxifen, metabolites or the endoxifen/tamoxifen ratio among the three phases. The genetic component (rGC) of the CYP2D6-mediated conversion of tamoxifen into endoxifen, estimated using the repeated drug administration procedure across the three phases, was 0.87, pointing to an important component of genetic variability. In conclusion, this first post-marketing surveillance trial of oncologic generic drugs carried out in Brazilian patients verified the switchability between the reference and the generic tamoxifen formulation currently used at our institution. The adopted bracketed protocol adds confidence to this conclusion and may serve as a frame for future trials of post-marketing assessment of other generic drug products.

Identification, characterization and in silico ADMET prediction of Roflumilast degradation products.

The present study reports the degradation behavior of roflumilast (RFL), a new drug developed for the treatment of chronic obstructive pulmonary disease. The degradation of RFL was tested under various stress conditions as per the guidelines of the International Conference on Harmonization. The degradation products (DPs) of RFL were identified, characterized and in silico predictions were made of their pharmacokinetic properties, absorption, distribution, metabolism, excretion and toxicity (ADMET). RFL was subjected to various stress conditions including photodegradation, alkaline and acidic hydrolysis, oxidative and metallic degradation. After analysis by HPLC-DAD, the DPs were isolated by preparative TLC and characterized by high resolution mass spectrometry (HRMS), 1H NMR, 13C NMR and infrared (IR) spectroscopy. RFL tablets were prepared by the addition of solid stressing substances such as excipients and storage in an accelerated stability chamber (40°C; 75% r.h.) for sixteen months. Resulting DPs from the tablets were analyzed by UFLC-QTOF. The most drastic degradation conditions for RFL were 5M NaOH(aq), 6M HCl(aq), 7.5% v/v peracetic acid, which resulted in the isolation of four DPs. However, milder degradation conditions (1M NaOH(aq) and photolysis) generated six DPs (DP-1, 2, 3, 5, 7 and 8), and are more similar to the actual conditions the drug will be exposed. For tablets containing RFL exposed to an alkaline reagent, two DPs were formed: DP-1 and DP-11. Whereas RFL-containing tablets exposed to acid and oxidizing agents, formed one product DP-11. Forced degradation of RFL led to the formation of eleven DPs, seven of which have never been previously reported. RFL is stable under metallic stress and it is relatively stable during photodegradation testing. The UFLC-QTOF methodology detected a greater number of DPs that formed during the stress conditions tested when compared to the HPLC-DAD methodology. In silico prediction of the ADMET properties of the RFL degradation products and metabolites produced in this study are potentially hepatotoxic.

Sodium montmorillonite/amine-containing drugs complexes: new insights on intercalated drugs arrangement into layered carrier material.

Layered drug delivery carriers are current targets of nanotechnology studies since they are able to accommodate pharmacologically active substances and are effective at modulating drug release. Sodium montmorillonite (Na-MMT) is a clay that has suitable properties for developing new pharmaceutical materials due to its high degree of surface area and high capacity for cation exchange. Therefore Na-MMT is a versatile material for the preparation of new drug delivery systems, especially for slow release of protonable drugs. Herein, we describe the intercalation of several amine-containing drugs with Na-MMT so we can derive a better understanding of how these drugs molecules interact with and distribute throughout the Na-MMT interlayer space. Therefore, for this purpose nine sodium montmorillonite/amine-containing drugs complexes (Na-MMT/drug) were prepared and characterized. In addition, the physicochemical properties of the drugs molecules in combination with different experimental conditions were assessed to determine how these factors influenced experimental outcomes (e.g. increase of the interlayer spacing versus drugs arrangement and orientation). We also performed a molecular modeling study of these amine-containing drugs associated with different Na-MMT/drug complex models to analyze the orientation and arrangement of the drugs molecules in the complexes studied. Six amine-containing drugs (rivastigmine, doxazosin, 5-fluorouracil, chlorhexidine, dapsone, nystatin) were found to successfully intercalate Na-MMT. These findings provide important insights on the interlayer aspect of the molecular systems formed and may contribute to produce more efficient drug delivery nanosystems.

Therapeutic nanosystems for oral administration of insulin.

The treatment of Diabetes Mellitus (DM), a chronic disease, is primarily based upon administration of insulin forms to patients. Conventional subcutaneous administration is associated with a large number of complications, therefore, several new strategies have been developed. Amongst these strategies, oral insulin administration is much less invasive and, therefore, well tolerated. In recent years, various nanoformulations were developed for the oral administration of insulin, allowing more effective stabilization of the active pharmaceutical ingredient and modified for better absorption along the gastrointestinal tract. The development of different oral insulin nanoformulations in academic research as well as in patents, including the development of nanoparticles, liposomes, nanoemulsions and the use of cyclodextrins deserves special attention. The future of oral insulin nanoformulations is dependent on strategies utilizing simple technologies that stabilize the raw material, including inclusion within cyclodextrins or inclusion in low weight molecular mass polymers/ oligomers. All of the theories developed here provide a solid foundation upon which to develop new methods for the production of pharmaceutical peptide formulations. In addition, the effective search for existing nanometric formulations of insulin could provide economically viable therapeutic options that can consequently be produced on an industrial scale.

Development and characterization of a new oral dapsone nanoemulsion system: permeability and in silico bioavailability studies.

BACKGROUND: Dapsone is described as being active against Mycobacterium leprae, hence its role in the treatment of leprosy and related pathologies. Despite its therapeutic potential, the low solubility of dapsone in water results in low bioavailability and high microbial resistance. Nanoemulsions are pharmaceutical delivery systems derived from micellar solutions with a good capacity for improving absorption. The aim of this work was to develop and compare the permeability of a series of dapsone nanoemulsions in Caco-2 cell culture against that of effective permeability in the human body simulated using Gastroplus™ software. METHODS AND RESULTS: The release profiles of the dapsone nanoemulsions using different combinations of surfactants and cosolvent showed a higher dissolution rate in simulated gastric and enteric fluid than did the dispersed dapsone powder. The drug release kinetics were consistent with a Higuchi model. CONCLUSION: This comparison of dapsone permeability in Caco-2 cells with effective permeability in the human body simulated by Gastroplus showed a good correlation and indicates potential improvement in the biodisponibility of dapsone using this new system.

Influence of the relative composition of trace elements and vitamins in physicochemical stability of total parenteral nutrition formulations for neonatal use.

OBJECTIVE: The present study aimed to evaluate the influence of the relative composition of trace elements and vitamins in physicochemical stability of neonatal parenteral nutrition. MATERIAL AND METHODS: Three formulations for neonatal administration were selected; the main variable was the presence of trace elements and vitamins. The analyses where carried out immediately after preparation and at 24 h, 48 h, 72 h and 7 days after preparation. Three methods were selected to determine globule size: light obscuration, dynamic light scattering and optical microscopy. Complementary evaluation including visual inspection, determination of pH and osmolarity, peroxide levels and measurements of zeta potential were also performed. RESULTS: There was an observable alteration in color and phase separation in the PN stored at 25°C and 40°C. Neither globule size pattern, nor any other physicochemical characteristic evaluated appeared to be considerably altered in any of the analyzed formulations even after 7 days of storage at 5°C. Globule size in all the PN studied was consistent with the established limit, below 500 nm by DLS measurement, and PFAT5 was below 0.05% under all storage temperatures. CONCLUSION: Concomitant presence of trace elements and vitamins in the same neonatal formulation did not alter the evaluated aspects of stability.

Chemical stability study of vitamins thiamine, riboflavin, pyridoxine and ascorbic acid in parenteral nutrition for neonatal use.

BACKGROUND: The objective of this work was to study the vitamins B1, B2, B6 and C stability in a pediatric formulation containing high amounts of calcium in the presence of organic phosphate, amino acids, glucose, sodium chloride, magnesium sulfate, pediatric vitamins and trace elements under different conditions using developed and validated analytical methods. METHODS: The study was carried out during 72 h with formulations packaged in recommended storage temperature (4°C) and 25°C, with and without photoprotection. RESULTS: The results showed that the methodologies used for assessing the chemical stability of vitamins B1, B2, B6 and C in the formulation were selective, linear, precise and accurate. The vitamins could be considered stable in the formulation during the three days of study if stored at 4°C. When stored at 25°C vitamin C presented instability after 48 h. CONCLUSION: The pediatric formulation containing high amount of calcium in the presence of organic phosphate, amino acids, glucose, sodium chloride, magnesium sulphate, pediatric vitamins and trace elements packaged in bag-type trilaminate presented a shelf life of the 72 h, when maintained under refrigeration, between 2°C and 8°C. This shelf life was measured considering the vitamins studied. Further studies are needed including all the vitamins present in this formulation.