Chemically Tailored Growth of 2D Semiconductors via Hybrid Metal-Organic Chemical Vapor Deposition.

Two-dimensional (2D) semiconducting transition-metal dichalcogenides (TMDCs) are an exciting platform for excitonic physics and next-generation electronics, creating a strong demand to understand their growth, doping, and heterostructures. Despite significant progress in solid-source (SS-) and metal-organic chemical vapor deposition (MOCVD), further optimization is necessary to grow highly crystalline 2D TMDCs with controlled doping. Here, we report a hybrid MOCVD growth method that combines liquid-phase metal precursor deposition and vapor-phase organo-chalcogen delivery to leverage the advantages of both MOCVD and SS-CVD. Using our hybrid approach, we demonstrate WS2 growth with tunable morphologies─from separated single-crystal domains to continuous monolayer films─on a variety of substrates, including sapphire, SiO2, and Au. These WS2 films exhibit narrow neutral exciton photoluminescence line widths down to 27-28 meV and room-temperature mobility up to 34-36 cm2 V-1 s-1. Through simple modifications to the liquid precursor composition, we demonstrate the growth of V-doped WS2, MoxW1-xS2 alloys, and in-plane WS2-MoS2 heterostructures. This work presents an efficient approach for addressing a variety of TMDC synthesis needs on a laboratory scale.

Axially-Polarized Excitonic Series and Anisotropic van der Waals Stacked Heterojunction in a Quasi-1D Layered Transition-Metal Trichalcogenide.

Anisotropic optical 2D materials are crucial for achieving multiple-quanta functions within quantum materials, which enables the fabrication of axially polarized electronic and optoelectronic devices. In this work, multiple excitonic emissions owning polarization-sensitive orientations are clearly detected in a multilayered quasi-1D ZrS3 nanoribbon with respect to the nanostripe edge. Four excitons denoted as AS1, AS2, AS, and A2 with E ⊥ b polarized direction and one prominent A1 exciton with E || b polarized emission are simultaneously detected in the polarized micro-photoluminescence (µPL) measurement of 1.9-2.2 eV at 10 K. In contrast to light emission, polarized micro-thermoreflectance (µTR) measurements are performed to identify the polarization dependence and verify the excitons in the multilayered ZrS3 nanoribbon from the perspective of light absorption. At 10 K, a prominent and broadened peak on the lower-energy side, containing an indirect resonant emission (DI) observed by µPL and an indirect defect-bound exciton peak (AInd) observed by both µPL and µTR, is simultaneously detected, confirming the existence of a quasi-direct band edge in ZrS3. A van der Waals stacked p-GaSe/n-ZrS3 heterojunction solar cell is fabricated, which demonstrates a maximum axially-polarized conversion efficiency up to 0.412% as the E || b polarized light incident onto the device.

Direct Growth of Bi2SeO5 Thin Films for High-k Dielectrics via Atomic Layer Deposition.

This study describes a modified atomic layer deposition (ALD) process for fabricating BiOxSey thin films, targeting their application as high-k dielectrics in semiconductor devices, especially for two-dimensional semiconductors. Using an intermediate-enhanced ALD technique for Bi2Se3 and a plasma-enhanced ALD process for Bi2O3, a method for the sequential deposition of Bi2SeO5 ternary films has been established. The thin film has been deposited on SiO2 and TiN substrates, exhibiting growth rates of 0.17 to 0.16 nm·cycle-1 without an incubation period, thanks to facile nucleation characteristics. The resulting film exhibited high flatness and reached 96% of its theoretical density, forming a uniform nanocrystalline structure. Electrical evaluations using metal-insulator-metal capacitors indicated the dielectric constant (∼17.6) and electrical breakdown strength (2.6 MV·cm-1), demonstrating their potential as a dielectric layer.

Photoluminescence of Chemically and Electrically Doped Two-Dimensional Monolayer Semiconductors.

Two-dimensional (2D) transition metal dichalcogenide (TMDC) monolayers exhibit unique physical properties, such as self-terminating surfaces, a direct bandgap, and near-unity photoluminescence (PL) quantum yield (QY), which make them attractive for electronic and optoelectronic applications. Surface charge transfer has been widely used as a technique to control the concentration of free charge in 2D semiconductors, but its estimation and the impact on the optoelectronic properties of the material remain a challenge. In this work, we investigate the optical properties of a WS2 monolayer under three different doping approaches: benzyl viologen (BV), potassium (K), and electrostatic doping. Owing to the excitonic nature of 2D TMDC monolayers, the PL of the doped WS2 monolayer exhibits redshift and a decrease in intensity, which is evidenced by the increase in trion population. The electron concentrations of 3.79×1013 cm-2, 6.21×1013 cm-2, and 3.12×1012 cm-2 were measured for WS2 monolayers doped with BV, K, and electrostatic doping, respectively. PL offers a direct and versatile approach to probe the doping effect, allowing for the measurement of carrier concentration in 2D monolayer semiconductors.

Bioinspired In-Sensor Multimodal Fusion for Enhanced Spatial and Spatiotemporal Association.

Multimodal perception can capture more precise and comprehensive information compared with unimodal approaches. However, current sensory systems typically merge multimodal signals at computing terminals following parallel processing and transmission, which results in the potential loss of spatial association information and requires time stamps to maintain temporal coherence for time-series data. Here we demonstrate bioinspired in-sensor multimodal fusion, which effectively enhances comprehensive perception and reduces the level of data transfer between sensory terminal and computation units. By adopting floating gate phototransistors with reconfigurable photoresponse plasticity, we realize the agile spatial and spatiotemporal fusion under nonvolatile and volatile photoresponse modes. To realize an optimal spatial estimation, we integrate spatial information from visual-tactile signals. For dynamic events, we capture and fuse in real time spatiotemporal information from visual-audio signals, realizing a dance-music synchronization recognition task without a time-stamping process. This in-sensor multimodal fusion approach provides the potential to simplify the multimodal integration system, extending the in-sensor computing paradigm.

Nonvolatile Modulation of Bi2O2Se/Pb(Zr,Ti)O3 Heteroepitaxy.

The pursuit of high-performance electronic devices has driven the research focus toward 2D semiconductors with high electron mobility and suitable band gaps. Previous studies have demonstrated that quasi-2D Bi2O2Se (BOSe) has remarkable physical properties and is a promising candidate for further exploration. Building upon this foundation, the present work introduces a novel concept for achieving nonvolatile and reversible control of BOSe's electronic properties. The approach involves the epitaxial integration of a ferroelectric PbZr0.2Ti0.8O3 (PZT) layer to modify BOSe's band alignment. Within the BOSe/PZT heteroepitaxy, through two opposite ferroelectric polarization states of the PZT layer, we can tune the Fermi level in the BOSe layer. Consequently, this controlled modulation of the electronic structure provides a pathway to manipulate the electrical properties of the BOSe layer and the corresponding devices.

Intrinsic negative Poisson's ratio of the monolayer semiconductorß-TeO2.

Monolayer semiconductors with unique mechanical responses are promising candidates for novel electromechanical applications. Here, through first-principles calculations, we discover that the monolayerß-TeO2, a high-mobilityp-type and environmentally stable 2D semiconductor, exhibits an unusual out-of-plane negative Poisson's ratio (NPR) when a uniaxial strain is applied along the zigzag direction. The NPR originates from the unique six-sublayer puckered structure and hinge-like Te-O bonds in the 2Dß-TeO2. We further propose that the sign of the Raman frequency change under uniaxial tensile strain could assist in determining the lattice orientation of monolayerß-TeO2, which facilitates the experimental study of the NPR. Our results is expected to motivate further experimental and theoretical studies of the rich physical and mechanical properties of monolayerß-TeO2.

Eight In. Wafer-Scale Epitaxial Monolayer MoS2.

Large-scale, high-quality, and uniform monolayer molybdenum disulfide (MoS2) films are crucial for their applications in next-generation electronics and optoelectronics. Epitaxy is a mainstream technique for achieving high-quality MoS2 films and is demonstrated at a wafer scale up to 4-in. In this study, the epitaxial growth of 8-in. wafer-scale highly oriented monolayer MoS2 on sapphire is reported as with excellent spatial homogeneity, using a specially designed vertical chemical vapor deposition (VCVD) system. Field effect transistors (FETs) based on the as-grown 8-in. wafer-scale monolayer MoS2 film are fabricated and exhibit high performances, with an average mobility and an on/off ratio of 53.5 cm2 V-1 s-1 and 107, respectively. In addition, batch fabrication of logic devices and 11-stage ring oscillators are also demonstrated, showcasing excellent electrical functions. This work may pave the way of MoS2 in practical industry-scale applications.

Vertical Cross-Alignments of 2D Semiconductors with Steered Internal Electric Field for Urea Electrooxidation via Balancing Intermediates Adsorption.

Single-component electrocatalysts generally lead to unbalanced adsorption of OH- and urea during urea oxidation reaction (UOR), thus obtaining low activity and selectivity especially when oxygen evolution reaction (OER) competes at high potentials (>1.5 V). Herein, a cross-alignment strategy of in situ vertically growing Ni(OH)2 nanosheets on 2D semiconductor g-C3N4 is reported to form a hetero-structured electrocatalyst. Various spectroscopy measurements including in situ experiments indicate the existence of enhanced internal electric field at the interfaces of vertical Ni(OH)2 and g-C3N4 nanosheets, favorable for balancing adsorption of reaction intermediates. This heterojunction electrocatalyst shows high-selectivity UOR compared to pure Ni(OH)2, even at high potentials (>1.5 V) and large current density. The computational results show the vertical heterojunction could steer the internal electric field to increase the adsorption of urea, thus efficiently avoiding poisoning of strongly adsorbed OH- on active sites. A membrane electrode assembly (MEA)-based electrolyzer with the heterojunction anode could operate at an industrial-level current density of 200 mA cm-2. This work paves an avenue for designing high-performance electrocatalysts by vertical cross-alignments of active components.

Optimizing Thermoelectric Performance of Hybrid Crystals Bi2O2Se1-xTex in the Bi2O2X System.

In addressing the global need for sustainable energy conversion, this study presents a breakthrough in thermoelectric materials research by optimizing the Bi2O2Se1-xTex system in the Bi2O2Se/Bi2O2Te pseudobinary series. Leveraging the principles of innovative transport mechanisms and defect engineering, we introduce tellurium (Te) doping into Bi2O2Se to enhance its thermoelectric properties synergistically. With the help of various advanced characterization tools such as XRD, SEM, TEM, XPS, FTIR, TGA, LFA, and DSC, combined with relevant resistance and density measurement techniques, we conducted an in-depth exploration of the complex interactions between various factors within thermoelectric materials. We recognize that the balance and synergy of these factors in the thermoelectric conversion process are crucial to achieving efficient energy conversion. Through systematic research, we are committed to revealing the mechanisms of these interactions and providing a solid scientific foundation for the optimal design and performance enhancement of thermoelectric materials. Finally, the advantage coefficient (ZT) of the thermoelectric material has been significantly improved. The crystallographic analysis confirms the formation of a continuous series of mixed crystals with varying Te concentrations, adhering to Vegard's law and exhibiting significant improvements in electrical and thermal conductivities. The Bi2O2Se1-xTex crystals, particularly the Bi2O2Se0.6Te0.4 composition, demonstrate a peak ZT of 0.86 at 373 K. This achievement aligns with recent advancements in defect-enabled mechanisms and band convergence and sets a new standard for high-performance thermoelectrics. The study's findings contribute significantly to the ongoing quest for efficient thermal-to-electrical energy conversion, offering a promising avenue for future sustainable energy technologies.

Sm and Gd Contacts in 2D Semiconductors for High-Performance Electronics and Spintronics.

Two-dimensional (2D) semiconductors have attracted great attention due to their rich electronic properties and even been considered to have the potential to extend Moore's Law. However, the Schottky barrier between the metal and 2D semiconductor is formed due to the metal-induced gap states (MIGS), which greatly hinder the development of 2D semiconductor transistors in large-scale integrated circuits. Meanwhile, most air-stable 2D semiconductors are nonmagnetic, limiting the possibility of spintronic application. Here, we report a new strategy to suppress the MIGS and reduce the Schottky barrier height on 2D semiconductors (MoS2, WS2, and WSe2) by using lanthanide metal (Sm and Gd) contacts. It was found the lanthanide contacts exhibit a good Ohmic property with a near-zero Schottky barrier. As a result, the carrier mobility of MoS2 transistors reaches 118 cm2/(V s). Furthermore, Gd-contact MoS2 transistors show the typical magnetic property where the magnetoresistance reaches 2.7% at 5 K. By studying its spin valve effect, it was demonstrated that the nonlocal magnetoresistance is 4.1% and spin polarization is 3.25%. This study provides a promising pathway for high-performance 2D electronic and spintronics, which may open a new strategy for future computing-in-memory architecture.

Activating two-dimensional semiconductors for photocatalysis: a cross-dimensional strategy.

The emerging two-dimensional (2D) semiconductors substantially extend materials bases for versatile applications such as semiconductor photocatalysis demanding semiconductive matrices and large surface areas. The dimensionality, while endowing 2D semiconductors the unique properties to host photocatalytic functionality of pollutant removal and hydrogen evolution, hurdles the activation paths to form heterogenous photocatalysts where the photochemical processes are normally superior over these on the mono-compositional counterparts. In this perspective, we present a cross-dimensional strategy to employ thenD (n= 0-2) clusters or nanomaterials as activation partners to boost the photocatalytic activities of the 2D semiconductors. The formation principles of heterogenous photocatalysts are illustrated specifically for the 2D matrices, followed by selection criteria of them among the vast 2D database. The computer investigations are illustrated in the density functional theory route and machine learning benefitted from the vast samples in the 2D library. Synthetic realizations and characterizations of the 2D heterogenous systems are introduced with an emphasis on chemical methods and advanced techniques to understand materials and mechanistic studies. The perspective outlooks cross-dimensional activation strategies of the 2D materials for other applications such as CO2removal, and materials matrices in other dimensions which may inspire incoming research within these fields.

Ag-Assisted Dry Exfoliation of Large-Scale and Continuous 2D Monolayers.

Two-dimensional (2D) semiconductors have generated considerable attention for high-performance electronics and optoelectronics. However, to date, it is still challenging to mechanically exfoliate large-area and continuous monolayers while retaining their intrinsic properties. Here, we report a simple dry exfoliation approach to produce large-scale and continuous 2D monolayers by using a Ag film as the peeling tape. Importantly, the conducting Ag layer could be converted into AgOx nanoparticles at low annealing temperature, directly decoupling the conducting Ag with the underlayer 2D monolayers without involving any solution or etching process. Electrical characterization of the monolayer MoS2 transistor shows a decent carrier mobility of 42 cm2 V-1 s-1 and on-state current of 142 µA/µm. Finally, a plasmonic enhancement photodetector could be simultaneously realized due to the direct formation of Ag nanoparticles arrays on MoS2 monolayers, without complex approaches for nanoparticle synthesis and integration processes, demonstrating photoresponsivity and detectivity of 6.3 × 105 A/W and 2.3 × 1013 Jones, respectively.

Probing the Formation of Dark Interlayer Excitons via Ultrafast Photocurrent.

Optically dark excitons determine a wide range of properties of photoexcited semiconductors yet are hard to access via conventional time-resolved spectroscopies. Here, we develop a time-resolved ultrafast photocurrent technique (trPC) to probe the formation dynamics of optically dark excitons. The nonlinear nature of the trPC makes it particularly sensitive to the formation of excitons occurring at the femtosecond time scale after the excitation. As a proof of principle, we extract the interlayer exciton formation time of 0.4 ps at 160 µJ/cm2 fluence in a MoS2/MoSe2 heterostructure and show that this time decreases with fluence. In addition, our approach provides access to the dynamics of carriers and their interlayer transport. Overall, our work establishes trPC as a technique to study dark excitons in various systems that are hard to probe by other approaches.

Ferromagnetic Interlayer Coupling in CrSBr Crystals Irradiated by Ions.

Layered magnetic materials are becoming a major platform for future spin-based applications. Particularly, the air-stable van der Waals compound CrSBr is attracting considerable interest due to its prominent magneto-transport and magneto-optical properties. In this work, we observe a transition from antiferromagnetic to ferromagnetic behavior in CrSBr crystals exposed to high-energy, non-magnetic ions. Already at moderate fluences, ion irradiation induces a remanent magnetization with hysteresis adapting to the easy-axis anisotropy of the pristine magnetic order up to a critical temperature of 110 K. Structure analysis of the irradiated crystals in conjunction with density functional theory calculations suggests that the displacement of constituent atoms due to collisions with ions and the formation of interstitials favors ferromagnetic order between the layers.

Single Atomic Defect Conductivity for Selective Dilute Impurity Imaging in 2D Semiconductors.

Precisely controlled impurity doping is of fundamental significance in modern semiconductor technologies. Desired physical properties are often achieved at impurity concentrations well below parts per million level. For emergent two-dimensional semiconductors, development of reliable doping strategies is hindered by the inherent difficulty in identifying and quantifying impurities in such a dilute limit where the absolute number of atoms to be detected is insufficient for common analytical techniques. Here we report rapid high-contrast imaging of dilute single atomic impurities by using conductive atomic force microscopy. We show that the local conductivity is enhanced by more than 100-fold by a single impurity atom due to resonance-assisted tunneling. Unlike the closely related scanning tunneling microscopy, the local conductivity sensitively depends on the impurity energy level, allowing minority defects to be selectively imaged. We further demonstrate subsurface impurity detection with single monolayer depth resolution in multilayer materials.

The Discovery of a High-Mobility Two-Dimensional Bismuth Oxyselenide Semiconductor and Its Application in Nonvolatile Neuromorphic Devices.

The development of two-dimensional (2D) electronics is always accompanied by the discovery of 2D semiconductors with high mobility and specific crystal structures, which may bring revolutionary breakthrough on proof-of-concept devices and physics. Here, Bi3O2.5Se2, a 2D bismuth oxyselenide semiconductor with non-neutral layered crystal structure is discovered. Ultrathin Bi3O2.5Se2 films are readily synthesized by chemical vapor deposition, displaying tunable band gaps and high room-temperature field-effect mobility of >220 cm2 V-1 s-1. Moreover, the as-synthesized Bi3O2.5Se2 nanoplates were fabricated into top-gated transistors with a simple device configuration, whose carrier density can be reversibly regulated in the range of 1014 cm-2 just by a facile method of electrostatic doping at room temperature. These features enable it to be functionalized into nonvolatile synaptic transistors with ultralow operating energy consumption (∼0.5 fJ), high repeatability, low operating voltage (0.1 V), and long retention time. Our work extends the family of bismuth oxyselenide 2D semicondutors.

Highly Trustworthy In-Sensor Cryptography for Image Encryption and Authentication.

The prevailing transmission of image information over the Internet of Things demands trustworthy cryptography for high security and privacy. State-of-the-art security modules are usually physically separated from the sensory terminals that capture images, which unavoidably exposes image information to various attacks during the transmission process. Here we develop in-sensor cryptography that enables capturing images and producing security keys in the same hardware devices. The generated key inherently binds to the captured images, which gives rise to highly trustworthy cryptography. Using the intrinsic electronic and optoelectronic characteristics of the 256 molybdenum disulfide phototransistor array, we can harvest electronic and optoelectronic binary keys with a physically unclonable function and further upgrade them into multiple-state ternary and double-binary keys, exhibiting high uniformity, uniqueness, randomness, and coding capacity. This in-sensor cryptography enables highly trustworthy image encryption to avoid passive attacks and image authentication to prevent unauthorized editions.

Liquid-Metal-Printed Ultrathin Oxides for Atomically Smooth 2D Material Heterostructures.

Two-dimensional (2D) semiconductors are promising channel materials for continued downscaling of complementary metal-oxide-semiconductor (CMOS) logic circuits. However, their full potential continues to be limited by a lack of scalable high-k dielectrics that can achieve atomically smooth interfaces, small equivalent oxide thicknesses (EOTs), excellent gate control, and low leakage currents. Here, large-area liquid-metal-printed ultrathin Ga2O3 dielectrics for 2D electronics and optoelectronics are reported. The atomically smooth Ga2O3/WS2 interfaces enabled by the conformal nature of liquid metal printing are directly visualized. Atomic layer deposition compatibility with high-k Ga2O3/HfO2 top-gate dielectric stacks on a chemical-vapor-deposition-grown monolayer WS2 is demonstrated, achieving EOTs of ∼1 nm and subthreshold swings down to 84.9 mV/dec. Gate leakage currents are well within requirements for ultrascaled low-power logic circuits. These results show that liquid-metal-printed oxides can bridge a crucial gap in dielectric integration of 2D materials for next-generation nanoelectronics.

Combination of Polymer Gate Dielectric and Two-Dimensional Semiconductor for Emerging Field-Effect Transistors.

Two-dimensional (2D) materials are considered attractive semiconducting layers for emerging field-effect transistors owing to their unique electronic and optoelectronic properties. Polymers have been utilized in combination with 2D semiconductors as gate dielectric layers in field-effect transistors (FETs). Despite their distinctive advantages, the applicability of polymer gate dielectric materials for 2D semiconductor FETs has rarely been discussed in a comprehensive manner. Therefore, this paper reviews recent progress relating to 2D semiconductor FETs based on a wide range of polymeric gate dielectric materials, including (1) solution-based polymer dielectrics, (2) vacuum-deposited polymer dielectrics, (3) ferroelectric polymers, and (4) ion gels. Exploiting appropriate materials and corresponding processes, polymer gate dielectrics have enhanced the performance of 2D semiconductor FETs and enabled the development of versatile device structures in energy-efficient ways. Furthermore, FET-based functional electronic devices, such as flash memory devices, photodetectors, ferroelectric memory devices, and flexible electronics, are highlighted in this review. This paper also outlines challenges and opportunities in order to help develop high-performance FETs based on 2D semiconductors and polymer gate dielectrics and realize their practical applications.