The effect of fine grits and fine debris concentrations on the MLVSS/MLSS ratio of an activated sludge system.

This study embarks on an explorative investigation into the effects of typical concentrations and varying particle sizes of fine grits (FG, the involatile portion of suspended solids) and fine debris (FD, the volatile yet unbiodegradable fraction of suspended solids) within the influent on the mixed liquor volatile suspended solids (MLVSS)/mixed liquor suspended solids (MLSS) ratio of an activated sludge system. Through meticulous experimentation, it was discerned that the addition of FG or FD, the particle size of FG, and the concentration of FD bore no substantial impact on the pollutant removal efficiency (denoted by the removal rate of COD and ammonia nitrogen) under constant operational conditions. However, a notable decrease in the MLVSS/MLSS ratio was observed with a typical FG concentration of 20 mg/L, with smaller FG particle sizes exacerbating this reduction. Additionally, variations in FD concentrations influenced both MLSS and MLVSS/MLSS ratios; a higher FD concentration led to an increased MLSS and a reduced MLVSS/MLSS ratio, indicating FD accumulation in the system. A predictive model for MLVSS/MLSS was constructed based on quality balance calculations, offering a tool for foreseeing the MLVSS/MLSS ratio under stable long-term influent conditions of FG and FD. This model, validated using data from the BXH wastewater treatment plant (WWTP), showcased remarkable accuracy.

Promoting effects of bioplastics and sludge anaerobic co-fermentation for carboxylates production with pH regulation: Insights into the plastic structure, microbial metabolic traits, and adaptive mechanism.

Biodegradable plastics (BPs) are presenting new challenges for their reutilization. This work found that volatile fatty acids (VFAs) production by co-fermentation of BPs with waste activated sludge (WAS) reached 4-37 times of the WAS fermentation alone, which was further amplified by pH regulation (especially alkaline regulation). Moreover, the VFAs composition is highly associated with BPs category. By contrast, the traditional plastic showed a limited effect on the VFAs yield and composition. Alkaline regulation enhanced the breakdown of BPs' ester bonds and boosted WAS disintegration, increasing bioavailable substrates. The hydrolytic-acidogenic anaerobes (i.e., Serpentinicella and Proteiniclasticum) and the major metabolic processes participated in the transformation of BPs and WAS to VFAs were upregulated under alkaline conditions. Further exploration unveiled that quorum sensing and peptidoglycan synthesis played important roles in counteracting alkaline stress and maintaining microbial activity for effective VFAs generation. The works demonstrated the effectiveness of pH-regulated anaerobic co-fermentation for BPs valorization.

Enhancing short-chain fatty acids production from waste activated sludge anaerobic fermentation with addition of red mud: Performance and mechanisms.

Red mud (RM) as hazardous waste produced from aluminum refining industry has threatened the environment and human health. In this study, RM was added into the fermenter to promote short chain fatty acids (SCFAs) production from waste activated sludge (WAS) anaerobic fermentation. Results showed that the addition of RM could effectively improve the SCFAs production, especially, acetic acid. In particular, the production of total SCFAs and acetic acid in 20 g/L RM added fermenter were 1108.1 mg COD/L and 415.5 mg COD/L, which were 116.0% and 1308.0% higher than that in control fermenter. Batch experiment revealed that RM could enhance the hydrolysis and acidification process. Further study indicated that the activity of enzyme related to hydrolysis-acidification, abundance of fermentative bacteria for SCFAs production and functional metabolism genome were all improved with the addition of RM. The potential mechanism maybe that the RM promoted the hydrolysis-acidification process with the contained varies Fe(Ⅲ) oxides as electron acceptor, and the produced Fe2+ could serve as necessary trace elements to synthesize enzyme and then stimulate the expression of enzyme genes.

Synchronous and efficient removal of carbon, nitrogen, and phosphorus from actual rural sewage by composite wetlands enhanced with functional fillers.

A composite wetland (CECW) was constructed by introducing P-adsorption filler (EPAF) and activated sludge into traditional wetlands for treating actual sewage. The results showed that EPAF improved P removal through physico-chemical adsorption, and it could be stably regenerated after adsorption saturation without potential risks. Meanwhile, zeolite promoted NH4+-N reduction in sewage by cation exchange. In addition, simultaneous biological removal of carbon, nitrogen, and phosphorus was achieved through nitrification, denitrification, anammox, and aerobic P-accumulation processes induced by Nitrobacter, Proteus Hauser, Candidatus Paracaedibacter, and Brevundimonas. Under the coupling of filler interception/adsorption, microbial assimilation/transformation, flocculation, and plant uptake, CECW obtained the removal rates of 93.22 %, 85.75 %, 91.80 %, 95.38 %, 97.07 %, and 78.05 % for turbidity, TN, NH4+-N, TP, PO43--P, and TCOD, which met the Class 1A standard (GB18918-2002). Therefore, the experiment systematically investigated the effects and mechanism of CECW in treating actual sewage, which could provide reference for rural sewage treatment and sludge utilization.

Microbial approach towards anode biofilm engineering enhances extracellular electron transfer for bioenergy production.

Applying microbial electrolysis cells (MEC) is a biological approach to enhance the growth of high amounts of electroactive biofilm for extracellular electron transfer. The electroactive biofilm degrades the organics by oxidizing them at the anode and producing electrical energy. Addition of waste-activated sludge (WAS) with fat grease oil (FOG) produces an optimal reactor environment for microbial growth to enhance the exchange of electrons between cells via microbial electrolysis. The present work aimed to investigate the microbial approach to increase the extracellular electron transfer (EET) in microbial electrolysis cells. Results revealed that metabolites in electroactive microbes (EAM) grow viable cells that initiate high EET at anode sites. At optimum WAS with FOG addition, volatile fatty acid and current generation yield production was 2.94 ± 0.19 g/L and 17.91 ± 7.23 mA, accompanied by COD removal efficiency of 89.5 ± 14.4%, respectively. This study introduces a novel approach to anode biofilm engineering that significantly enhances extracellular electron transfer, offering a fresh perspective on bioenergy production. Our approach, which demonstrates that anodic biofilm enhances intercellular electron transfer, increases NADH-NAD ratio, and increases metabolite yield-fluxes, has the potential to revolutionize bio-electricity production. Results indicated that the electrolysis highlights MEC performance in power generation of 788 mV with 200 mL of anode volume of active viable cells by utilizing WAS with 11% FOG. The achievements of this study provide critical parameters for the anode biofilm engineering, demonstrating how growth cell volume, intercellular electron transfer, and increases in NADH-NAD ratio are evidence of an increase in the EET, compelling evidence for the resilience treatment and efficient current production. These findings are significant in advancing our understanding of bioenergy production.

Electricity production and nutrient recovery from waste activated sludge via microbial fuel cell and subsequent struvite crystallization: Effect of low temperature thermo-alkaline pretreatment.

Microbial fuel cell (MFC) and subsequent struvite crystallization are available low-carbon environmental- friendly techniques for resource utilization of waste activated sludge (WAS). In this study, low temperature thermo-alkaline pretreatment (LTTAP) was innovatively proposed for enhancing MFC electricity generation and subsequent struvite crystallization from WAS. The results indicated that LTTAP at 75 °C and pH 10 not only substantially shortened the start-up time of MFC to 3-4 days, but also significantly increased maximum power density to 5.38 W/m3. Moreover, thermo-alkaline pretreated WAS effectively exhibited stable and high output voltage over long period, compared to unpretreated WAS. Furthermore pretreated WAS can provide an effective pH buffering function for MFC operation. In addition, about 90 % of phosphate in the pretreated WAS supernatant was recovered by struvite crystallization. The findings herein provided a new route for enhancing electricity production and nutrient recovery from WAS, which can realize the full-scale applicationof WAS resource utilization.

How Does Triclocarban Affect Sulfur Transformation in Anaerobic Systems?

Triclocarban (TCC), as a typical antimicrobial agent, accumulates at substantial levels in natural environments and engineered systems. This work investigated the impact of TCC on anaerobic sulfur transformation, especially toxic H2S production. Experimental findings revealed that TCC facilitated sulfur flow from the sludge solid phase to liquid phase, promoted sulfate reduction and sulfur-containing amino acid degradation, and largely improved anaerobic H2S production, i.e., 50-600 mg/kg total suspended solids (TSS) TCC increased the cumulative H2S yields by 24.76-478.12%. Although TCC can be partially biodegraded in anaerobic systems, the increase in H2S production can be mainly attributed to the effect of TCC rather than its degradation products. TCC was spontaneously adsorbed by protein-like substances contained in microbe extracellular polymers (EPSs), and the adsorbed TCC increased the direct electron transfer ability of EPSs, possibly due to the increase in the content of electroactive polymer protein in EPSs, the polarization of the amide group C═O bond, and the increase of the α-helical peptide dipole moment, which might be one important reason for promoting sulfur bioconversion processes. Microbial analysis showed that the presence of TCC enriched the organic substrate-degrading bacteria and sulfate-reducing bacteria and increased the abundances of functional genes encoding sulfate transport and dissimilatory sulfate reduction.

Real-time prediction of the chemical oxygen demand component parameters in activated sludge model using backpropagation neural network.

Activated sludge models are increasingly being adopted to guide the operation of wastewater treatment plants. Chemical oxygen demand (COD) is an indispensable input for such models. To ensure that the activated sludge mathematical model can adapt to various water quality conditions and minimize prediction errors, it is essential to predict the parameters of the COD components in real-time based on the actual influent COD concentrations. However, conventional methods of determining the components' contributions are too intricate and time-consuming to be really useful. In this study, the chemical oxygen demand in the actual waste water treatment plant was disassembled and analyzed. The research involved determining the proportions of each COD component, assessing the reliability of the measurement parameters, and examining potential factors affecting measurement accuracy, including weather conditions, pipeline conditions, and residents' habits. Then, a backpropagation neural network was developed which can deliver real-time predictions for five important contributors to COD in real time. In addition, using the receiver operating characteristics curve and prediction accuracy to evaluate the performance of the prediction model. For all five components, which SS, XS, SI, XA, and XH, the prediction accuracy of model was more than 80 %. The maximum deviation values of these parameters fall within the range of the actual detected values, suggesting that the model's predictions align well with real-world observations, and demonstrated prediction performance adequate for practical application in wastewater treatment. This article can provide research basis for the engineering application of activated sludge model and help for the intelligent upgrading of waste water treatment plants.

The predicted secreted proteome of activated sludge microorganisms indicates distinct nutrient niches.

In wastewater treatment plants (WWTPs), complex microbial communities process diverse chemical compounds from sewage. Secreted proteins are critical because many are the first to interact with or degrade external (macro)molecules. To better understand microbial functions in WWTPs, we predicted secreted proteomes of WWTP microbiota from more than 1,000 high-quality metagenome-assembled genomes (MAGs) from 23 Danish WWTPs with biological nutrient removal. Focus was placed on examining secreted catabolic exoenzymes that target major classes of macromolecules. We demonstrate that Bacteroidota has a high potential to digest complex polysaccharides, but also proteins and nucleic acids. Poorly understood activated sludge members of Acidobacteriota and Gemmatimonadota also have high capacities for extracellular polysaccharide digestion. Secreted nucleases are encoded by 61% of MAGs indicating an importance for extracellular DNA and/or RNA digestion in WWTPs. Secreted lipases were the least common macromolecule-targeting enzymes predicted, encoded mainly by Gammaproteobacteria and Myxococcota. In contrast, diverse taxa encode extracellular peptidases, indicating that proteins are widely used nutrients. Diverse secreted multi-heme cytochromes suggest capabilities for extracellular electron transfer by various taxa, including some Bacteroidota that encode undescribed cytochromes with >100 heme-binding motifs. Myxococcota have exceptionally large secreted protein complements, probably related to predatory lifestyles and/or complex cell cycles. Many Gammaproteobacteria MAGs (mostly former Betaproteobacteria) encode few or no secreted hydrolases, but many periplasmic substrate-binding proteins and ABC- and TRAP-transporters, suggesting they are mostly sustained by small molecules. Together, this study provides a comprehensive overview of how WWTPs microorganisms interact with the environment, providing new insights into their functioning and niche partitioning.IMPORTANCEWastewater treatment plants (WWTPs) are critical biotechnological systems that clean wastewater, allowing the water to reenter the environment and limit eutrophication and pollution. They are also increasingly important for the recovery of resources. They function primarily by the activity of microorganisms, which act as a "living sponge," taking up and transforming nutrients, organic material, and pollutants. Despite much research, many microorganisms in WWTPs are uncultivated and poorly characterized, limiting our understanding of their functioning. Here, we analyzed a large collection of high-quality metagenome-assembled genomes from WWTPs for encoded secreted enzymes and proteins, with special emphasis on those used to degrade organic material. This analysis showed highly distinct secreted proteome profiles among different major phylogenetic groups of microorganisms, thereby providing new insights into how different groups function and co-exist in activated sludge. This knowledge will contribute to a better understanding of how to efficiently manage and exploit WWTP microbiomes.

Promotion of aromatic amino acids of extracellular polymeric substance targeted transformation via sulfite mediated iron redox cycling in sludge solid-liquid separation.

Highly hydrophilic extracellular polymeric substance (EPS) with gel-like structure seriously plagues the development of sludge deep dewatering. Oxysulfur radicals-based oxidation driven by iron-bearing mineral proposes a promising strategy for effective EPS decomposition. However, the transformation and involved interaction mechanisms of aromatic proteins are still controversial due to the complex EPS structure. Herein, sulfite mediated siderite (denoted as Fe(II)/S(IV)) was developed for targeted transformation aromatic amino acids in EPS oxidation to strengthen sludge solid-liquid separation. The enhanced sludge dewaterability were benefited from the Fe(II)/S(IV) bonded interaction assisted by Fe3+/Fe2+ as redox interface that facilitating the release of intracellular bound water via diminish the hydrophily and bind strength with solid protons. The amide region nitrogen of aromatic amino acids (especially tyrosine and tryptophan) originating from EPS presented looser structure and lower spatial site resistance, which were attributed to the exposure of hydrophobic sites in amino groups after Fe(II)/S(IV) treatment. Furthermore, the effective decline of aromatic amino acids in inner layer-EPS (loosely bound EPS and tightly bound EPS) was directed from Fe-N targeted interaction by triggering a series of sulfate-based radical chain reactions. The good correlation between electron transfer amount (R2 = 0.926) and Fe-N (R2 = 0.925) with bonding interaction demonstrated that the complexation of aromatic amino acids with Fe sites on siderite/sulfite via Fe-N bonds, accounting for efficient sludge solid-liquid separation. This study deepens the understanding of sludge organic matter targeted transformation and provides a tactic for iron-based conditioning of sludge.

Influential mechanism of water occurrence states of waste-activated sludge: Specifically focusing on the pore characteristics dominated by cation-organic interactions.

The solid pore characteristics are commonly considered as the important influential factors on waste-activated sludge (WAS) dewaterability, and should be related to the cohesive force of bio-flocs dominated by cation-organic interactions at solid-water interface. This study aimed to establish an approach for regulating the solid pore structure of WAS by cationic regulation. The influential mechanism of WAS dewaterability was accordingly explored from the perspective of the pore characteristics dominated by cation-organic interactions. Primarily, with the gradient removal or addition of bivalent cations, the varying pore structure of WAS flocs was tracked by in-situ synchrotron X-ray computed microtomography imaging technique (CMT). The three-dimensional visual model was established to quantify the pore structure parameters of WAS flocs. Following the visualization analysis, the artificial intelligence means, the gradient-weighted class activation mapping (Grad CAM) of three-dimensional convolutional neural network (3D-CNN), was applied for the first time to explore the linkages among solid surface properties, solid pore structure, water occurrence states and sludge dewaterability. It was found that the number and volume of isolated pores jointly determined the mobility and the fractions of vicinal water and interstitial water (p-value ≤ 0.02); also, the decreasing polar or acid-based interfacial free energy with the cationic addition was accompanied with the decreasing isolated pore mean-volume (Pearson coefficient=-0.77, p-value < 0.01). These results indicated that the pore structure characteristics determined the water occurrence states, but the solid porosity strongly depended on the interfacial properties. Accordingly, the molecular docking was applied to explore the interfacial reaction mechanism between Ca2+/Mg2+ and solid compositions in terms of complexation sites, molecular dynamics and free energy calculations. As a result, how the cation-organic interactions affected the pore characteristics through solid surface modification could be clarified, which is expected to serve as theoretical foundation for the development of novel sludge conditioning technologies, i.e., more efforts should be devoted to increasing the dense degree of sludge particles through weakening the hydration repulsion of solid surface.

Analysis of wastewater treatment plant data identifies the drivers of PFAS enrichment in foams.

The concept of incorporating foam fractionation in aerated bioreactors at wastewater treatment plants (WWTPs) for the removal of per- and polyfluoroalkyl substances (PFAS) has recently been proposed. The extent of PFAS enrichment in aerated bioreactors' foams, as indicated by enrichment factors (EFs), has been observed to vary widely. Laboratory evidence has shown that factors affecting PFAS enrichment in foams include conductivity, surfactant concentrations and initial PFAS concentrations. However, real wastewaters are complex heterogenous matrices with physical, chemical and biological characteristics potentially contributing to the phenomenon of PFAS partitioning into foams. In this study, we characterised mixed liquor suspensions, including conductivity, filament content, aqueous PFAS concentrations, surface tension and total suspended solids concentrations (TSS) as well as foams, including bubble size and half-life. We used statistical tools - linear mixed-effects model - to establish relationships between PFAS enrichment in aerated bioreactor foams and the examined characteristics. We found that some of the examined characteristics, specifically filament content, surface tension and TSS concentrations measured in mixed liquor suspension and foam half-life, are negatively and significantly associated with the enrichment of longer chain PFAS (with perfluorinated carbon number ≥ 6). Of these, filament content is the important determinant of PFAS enrichment, potentially leading to an increase in, for example, perfluorooctanoic acid (PFOA) EF from 3 to 100 between typical filamentous and non-filamentous suspended biomass. However, enrichment of shorter chain PFAS (with perfluorinated carbon number ≤ 5) is negligible and is not affected by the characteristics that were measured. The findings of our study may serve as valuable information for the implementation of foam fractionation at WWTPs by elucidating the drivers that contribute to the enrichment of longer chain PFAS, under conditions typically found at WWTPs.

Adaptation towards catabolic biodegradation of trace organic contaminants in activated sludge.

Trace organic contaminants (TrOCs) are omnipresent in wastewater treatment plants (WWTPs), yet, their removal during wastewater treatment is oftentimes incomplete and underlying biotransformation mechanisms are not fully understood. In this study, we elucidate how different factors, including pre-exposure levels and duration, influence microbial adaptation towards catabolic TrOC biodegradation and its potential role in biological wastewater treatment. Four sequencing batch reactors (SBRs) were operated in parallel in three succeeding phases, adding and removing a selection of 26 TrOCs at different concentration levels. After each phase of SBR operation, a series of batch experiments was conducted to monitor biotransformation kinetics of those same TrOCs across various spike concentrations. For half of our test TrOCs, we detected increased biotransformation in sludge pre-exposed to TrOC concentrations ≥5 µg L-1 over a 30-day period, with most significant differences observed for the insect repellent DEET and the artificial sweetener saccharin. Accordingly, 16S rRNA amplicon sequencing revealed enrichment of taxa that have previously been linked to catabolic biodegradation of several test TrOCs, e.g., Bosea sp. and Shinella sp. for acesulfame degradation, and Pseudomonas sp. for caffeine, cyclamate, DEET, metformin, paracetamol, and isoproturon degradation. We further conducted shotgun metagenomics to query for gene products previously reported to be involved in the TrOCs' biodegradation pathways. In the future, directed microbial adaptation may be a solution to improve bioremediation of TrOCs in contaminated environments or in WWTPs.

A novel strategy for waste activated sludge treatment: Recovery of structural extracellular polymeric substances and fermentative production of volatile fatty acids.

Structural extracellular polymeric substances (SEPS) as valuable biopolymers, can be extracted from waste activated sludge (WAS). However, the extraction yield is typically low, and detailed information on SEPS characterizations, as well as proper treatment of the sludge after SEPS extraction, remains limited. This study aimed to optimize the conditions of heating-Na2CO3 extraction process to increase the yield of SEPS extracted from WAS. Subsequently, SEPS were characterized, and, for the first time, insights into their protein composition were uncovered by using proteomics. A maximum SEPS yield of 209 mg g-1 volatile solid (VS) was obtained under optimal conditions: temperature of 90 °C, heating time of 60 min, Na+ dosage of 8.0 mmol/g VS, and pH required to precipitation of 4.0, which was comparable to that from the aerobic granular sludge reported in literature. Proteomics analysis unveiled that the proteins in SEPS primarily originated from microorganisms involved in nitrogen fixation and organic matter degradation, including their intracellular and membrane-associated regions. These proteins exhibited various catalytic activities and played crucial roles in aggregation processes. Besides, the process of SEPS extraction significantly enhanced volatile fatty acid (VFA) production during the anaerobic fermentation of residual WAS after SEPS extraction. A maximum VFA yield of 420 ± 14 mg COD/g VSadded was observed in anaerobic fermentation of 10 d, which was 77.2 ± 0.1 % higher than that from raw sludge. Mechanism analysis revealed that SEPS extraction not only improved WAS disintegration and solubilization but also reduced the relative activity of methanogens during anaerobic fermentation. Moreover, SEPS extraction shifted the microbial population during anaerobic fermentation in the direction towards hydrolysis and acidification such as Fermentimonas sp. and Soehngenia sp. This study proposed a novel strategy based on SEPS extraction and VFA production for sludge treatment, offering potential benefits for resource recovery and improved process efficiency.

Interaction of poly dimethyl diallyl ammonium chloride with sludge components: Anaerobic digestion performance and adaptive changes of anaerobic microbes.

The wide utilization of poly dimethyl diallyl ammonium chloride (polyDADMAC) in industrial conditions leads to its accumulation in waste activated sludge (WAS), thereby affecting subsequent WAS treatment processes. This work investigated the interaction between polyDADMAC and WAS components from the perspective of anaerobic digestion (AD) performance and anaerobes adaptability variation. The results showed that polyDADMAC decreased the content of biodegradable organic substrates (i.e., soluble protein and carbohydrate) by binding with the functional groups and then settling to the solid phase, thus impeding the subsequent utilization. Higher concentrations of polyDADMAC prompted an initial protective response of excreting organic substrates into extracellular environment, but its toxicity to archaea was irreversible. Consequently, polyDADMAC inhibited the processes of AD and induced a 30 % reduction in methane production with 0.05 g polyDADMAC/g total suspended solid (TSS) addition. Changes in microbial community structure indicated that archaea involved in methane production (e.g., Anaerolineaceae sp. and Methanosaeta sp.) were inhibited when exposed to polyDADMAC. However, several adaptive bacteria with the ability of utilizing complex organics and participating in nitrogen cycle (e.g., Aminicenantales sp. and Ellin6067 sp.) were enriched with the above dosage. Specifically, the decreased abundance of genes relevant to methane metabolism pathway (i.e., mer and cdh) and increased abundance of genes involved in metabolism of cofactors and vitamins (e.g., nad and thi) indicated the toxicity of polyDADMAC and the irritant response of microflora. Moreover, polyDADMAC underwent degradation in AD system, resulting in a 12 % reduction in 15 days, accompanied by an increase in the -NO2 functional group. In general, this study provided a thorough understanding of the interaction between polyDADMAC and WAS components, raising concerns regarding the elimination of endogenous pollutants during AD.

A holistic valorization of treasured waste activated sludge for directional high-valued products recovery: Routes, key technologies and challenges.

Global energy shortages and environmental crises underscore the imperative for a circular economy to tackle resource scarcity and waste management. The circular economy model encourages the recovery and reuse of valuable materials, reducing reliance on finite natural resources and lessening the environmental impact of waste disposal. Among urban organic solid wastes, waste activated sludge (WAS) emerges as a potent reservoir of untapped resources (including various inorganic and organic ones) offering significant potential for recovery. This review delves into a comprehensive analysis of directional valorization of WAS to recover high-valued products, including the inorganic matters (i.e. phosphorus, ammonia nitrogen, and heavy metals), organic resources (i.e. extracellular polymers like alginate and protein, volatile fatty acid, methane, hydrogen, and plant growth hormones) and reutilization of WAS residues for the preparation of adsorbent materials - the biochar. Moreover, the main recovery methodologies associated influencing parameters, product application, and attendant challenges for those diverse recovered resources are unveiled. Future research are encouraged to prioritize the development of integrated multi-resource recovery approaches, the establishment of regulatory frameworks to support resource recovery and product utilization, and the systematic evaluation of disposal strategies to foster a more sustainable and resource-efficient future. This work illuminates avenues for sustainable WAS management with high-valued resource recovery towards circular economy.

Leaching behavior of microplastics during sludge mechanical dewatering and its effect on activated sludge.

Dewatering is an indispensable link in sludge treatment, but its effect on the microplastics (MPs) remains inadequately understood. This study investigated the physicochemical changes and leaching behavior of MPs during the mechanical dewatering of sludge, as well as the impact of MP leachates on activated sludge (AS). After sludge dewatering, MPs exhibit rougher surfaces, decreased sizes and altered functional groups due to the addition of dewatering agents and the application of mechanical force. Meanwhile, plastic additives, depolymerization products, and derivatives of their interactions are leached from MPs during sludge dewatering process. The concentration of MP-based leachates in sludge is 2-25 times higher than that in water. The enhancement of pH and ionic strength caused by dewatering agents induces the release of MP leachates enriched with protein-like, fulvic acid-like, and soluble microbial by-product-like substances. The reflux of MP leachates in sludge dewatering liquor to the wastewater treatment system negatively impacts AS, leading to a decrease in COD removal rate and inhibition of the extracellular polymeric substances secretion. More importantly, MP leachates cause oxidative stress to microbial cells and alter the microbial community structure of AS at the phylum and genus levels. These findings confirm that MPs undergo aging and leaching during sludge dewatering process, and MP leachates may negatively affect the wastewater treatment system.

Influence of perfluorooctanoic acid on alkaline anaerobic fermentation of waste activated sludge: Perspective from volatile fatty acids production and sludge reduction.

Alkaline anaerobic fermentation is an effective approach for resource utilization and reduction of waste activated sludge (WAS). Perfluorooctanoic acid (PFOA) is widespread in WAS, however, its potential impact on alkaline anaerobic fermentation of WAS remains largely unknown. Hence, this study focused on investigating the influence of PFOA on volatile fatty acids (VFAs) production and sludge reduction during alkaline anaerobic fermentation (pH = 10 ± 0.1), as well as the critical mechanisms. Results demonstrated that low PFOA concentration (5 mg/kg-TS) raised VFAs yield to 109.37%, while high levels of PFOA (25 and 50 mg/kg-TS) remarkably decreased VFAs production to 89.55% and 80.44% of the control. Mechanism exploration revealed that PFOA facilitated the solubilization process, and low PFOA level enhanced the accumulation of VFAs via increased bioavailable substrates and the activities of enzymes and microorganisms. On the contrary, high levels of PFOA were substantial biotoxicity, inducing excessive ROS production, causing oxidative damage, and reducing enzyme activity and functional microbial abundance, thereby decreasing VFAs production. Additionally, further analysis of sludge physicochemical properties confirmed that the effect of PFOA on WAS reduction exhibited the same trend as VFAs production. This work provides a basis for PFOA environmental risk assessment and WAS resource utilization.

Mechanistic insights into Fe3O4-mediated inhibition of H2S gas production in sludge anaerobic digestion.

The addition of iron-based conductive materials has been extensively validated as a highly effective approach to augment methane generation from anaerobic digestion (AD) process. In this work, it was additionally discovered that Fe3O4 notably suppressed the production of hazardous H2S gas during sludge AD. As the addition of Fe3O4 increased from 0 to 20 g/L, the accumulative H2S yields decreased by 89.2 % while the content of element sulfur and acid volatile sulfide (AVS) respectively increased by 55.0 % and 30.4 %. Mechanism analyses showed that the added Fe3O4 facilitated sludge conductive capacity, and boosted the efficiency of extracellular electron transfer, which accelerated the bioprocess of sulfide oxidation. Although Fe3O4 can chemically oxidize sulfide to elemental sulfur, microbial oxidation plays a major role in reducing H2S accumulation. Moreover, the released iron ions reacted with soluble sulfide, which promoted the chemical equilibrium of sulfide species from H2S to metal sulfide. Microbial analysis showed that some SRBs (i.e., Desulfomicrobium and Defluviicoccus) and SOB (i.e., Sulfuritalea) changed into keystone taxa (i.e., connectors and module hubs) in the reactor with Fe3O4 addition, showing that the functions of sulfate reduction and sulfur oxidation may play important roles in Fe3O4-present system. Fe3O4 presence also increased the content of functional genes encoding sulfide quinone reductase and flavocytochrome c sulfidedehydrogenase (e.g., Sqr and Fcc) that could oxidize sulfide to sulfur. The impact of other iron-based conductive material (i.e., zero-valent iron) was also verified, and the results showed that it could also significantly reduce H2S production. These findings provide new insights into the effect of iron-based conductive materials on anaerobic process, especially sulfur conversion.

Mechanistic exploration of COVlD-19 antiviral drug ritonavir on anaerobic digestion through experimental validation coupled with metagenomics analysis.

Aggregation of antiviral drugs (ATVs) in waste activated sludge (WAS) poses considerable environmental risk, so it is crucial to understand the behavior of these agents during WAS treatment. This study investigated the effects of ritonavir (RIT), an ATV used to treat human immunodeficiency virus infection and coronavirus disease 2019, on anaerobic digestion (AD) of WAS to reveal the mechanisms by which it interferes with anaerobic flora. The dosage influence results showed that methane production in AD of WAS decreased by 46.56 % when RIT concentration was increased to 1000 µg/kg total suspended solids (TSS). The AD staging test revealed that RIT mainly stimulated microbial synthesis of the extracellular polymeric substance (EPS), limiting organic matter solubilization. At 500 µg/kg TSS, RIT decreased CHO and CHON levels in dissolved organic matter by 23.12 % and 56.68 %, respectively, significantly reducing substrate availability to microorganisms. Metagenomic analysis of microbial functional gene sets revealed that RIT had greater inhibitory effects on protein and amino acid metabolism than on carbohydrate metabolism. Under RIT stress, methanogens switched from hydrogenotrophic and acetotrophic methanogenesis to methylotrophic and acetotrophic methanogenesis.