ABSTRACT
The skin is an envelope that covers the entire body. Nowadays, understanding and studying the mechanical, biological and sensory properties of the skin is essential, especially in dermatology and cosmetology. The in-depth study of the skin's mechanical behaviour is a highly intriguing challenge, enabling the differentiation of the behaviour of each layer. An extension device was developed to perform relaxation and extension tests to characterize the skin. The device has also been coupled with imaging tools (LC-OCT and ultrasound), allowing us to observe layer-by-layer deformations during the tests. Relaxation tests revealed significant skin anisotropy, as well as an influence of age and gender on skin viscoelastic parameters calculated from relaxation curves and a skin viscoelastic model. These tests also unveiled their ability to distinguish certain characteristic pathologies that alter the mechanical properties of the skin, such as scleroderma or heliodermatitis. Furthermore, the optical-mechanical coupling and deformation calculation through image analysis demonstrated that the skin layers exhibit distinct mechanical behaviours owing to their different structures. Finally, Poisson's ratio of the skin was obtained by calculating the deformation in two directions for each layer.
ABSTRACT
Anisotropic optical 2D materials are crucial for achieving multiple-quanta functions within quantum materials, which enables the fabrication of axially polarized electronic and optoelectronic devices. In this work, multiple excitonic emissions owning polarization-sensitive orientations are clearly detected in a multilayered quasi-1D ZrS3 nanoribbon with respect to the nanostripe edge. Four excitons denoted as AS1, AS2, AS, and A2 with E ⥠b polarized direction and one prominent A1 exciton with E || b polarized emission are simultaneously detected in the polarized micro-photoluminescence (µPL) measurement of 1.9-2.2 eV at 10 K. In contrast to light emission, polarized micro-thermoreflectance (µTR) measurements are performed to identify the polarization dependence and verify the excitons in the multilayered ZrS3 nanoribbon from the perspective of light absorption. At 10 K, a prominent and broadened peak on the lower-energy side, containing an indirect resonant emission (DI) observed by µPL and an indirect defect-bound exciton peak (AInd) observed by both µPL and µTR, is simultaneously detected, confirming the existence of a quasi-direct band edge in ZrS3. A van der Waals stacked p-GaSe/n-ZrS3 heterojunction solar cell is fabricated, which demonstrates a maximum axially-polarized conversion efficiency up to 0.412% as the E || b polarized light incident onto the device.
ABSTRACT
The advanced development of optoelectronic devices requires a methodical knowledge of the fundamental material properties of the key active components. Systematic investigations and correlations of such basic optical properties can lead to new insights for the design of more potent materials. In this perspective, we provide a systematic overview of the uniaxial complex refractive indices and the absorption coefficients obtained by ellipsometry as well as the optical bandgap energies derived from Tauc plots of six selected solution-processed polymer thin films. While the optical bandgap energies are intentionally distributed over the visible spectral range, we found that the absorption strength of all polymer samples are grouped in a random distribution within a rather uniform range of values.
ABSTRACT
This study explores the potential of untapped lithium hydroxide (LiOH) as a phase change material for thermal energy storage. By overcoming the challenges associated with the liquid LiOH leakage, we successfully thermal-cycled LiOH in a laboratory scale experimentation, and observed its stability (>500 thermal cycles), without chemical decomposition. This step has never been performed to date. Its solid-to-liquid reversible transitions temperatures and related solidification/melting enthalpies values have been verified. Then, the first experimental characterization of LiOH's thermal properties shows unexpected values for its heat capacity, thermal conductivity and diffusivity, in contradiction with the few ones available in literature. This opens avenues for LiOH's applications for the storage of sensible and latent heat, as shown through the increased cycle efficiency potential of a thermal energy storage system if based on its energy storage capacity; up to six times more volumetric energy density compared to traditional Solar Salt-based systems used in the solar tower plant (4.5 GJ/m3 vs. 0.76 GJ/m3 over 1000 thermal cycles). Additionally, we observed a softening phenomenon that occurs inconsistently during heating, but which may account for its excellent melting properties and the interplay with other raw chemicals. This new insight contributes certainly to the underlying mechanisms in the synthesis of another promising heat storage material in development: the peritectic compound Li4Br(OH)3. This pioneering work suggests LiOH as a promising ultra-compact thermal energy storage material for filling the intermediary gap from current to next-generation solar power plants, although its large-scale application requires further investigation to achieve economic viability.
ABSTRACT
Organic crystals are widely used by animals to manipulate light for producing structural colors and for improving vision. To date only seven crystal types are known to be used, and among them ß-guanine crystals are by far the most widespread. The fact that almost all these crystals have unusually high refractive indices (RIs) is consistent with their light manipulation function. Here, the physical, structural, and optical principles of how light interacts with the polarizable free-electron-rich environment of these quasiaromatic molecules are addressed. How the organization of these molecules into crystalline arrays introduces optical anisotropy and finally how organisms control crystal morphology and superstructural organization to optimize functions in light reflection and scattering are also discussed. Many open questions remain in this fascinating field, some of which arise out of this in-depth analysis of the interaction of light with crystal arrays. More types of organic crystals will probably be discovered, as well as other organisms that use these crystals to manipulate light. The insights gained from biological systems can also be harnessed for improving synthetic light-manipulating materials.
ABSTRACT
Antiferromagnets (AFMs) are ideal materials to boost neuromorphic computing toward the ultrahigh speed and ultracompact integration regime. However, developing a suitable AFM neuromorphic memory remains an aspirational but challenging goal. In this work, we construct such a memory based on the CoO/Pt heterostructure, in which the collinear insulating AFM CoO shows a strong perpendicular anisotropy facilitating its electrical readout and writing. Utilizing the unique nonlinear response and bipolar fading memory properties of the device, we demonstrate a multidimensional reservoir computing beyond the traditional binary paradigm. These results are expected to pave the way toward next-generation fast and massive neuromorphic computing.
ABSTRACT
OBJECTIVE: Neuroticism was found to be associated with cerebral small vessel disease (CSVD) in observational studies. We aimed to explore the causal relationship between distinct components of neuroticism and CSVD. METHODS: Two-sample mendelian randomization (MR) study was conducted to explore the bidirectional causal relationships between three genetically distinct subclusters of neuroticism (depressed affect, worry, and sensitivity to environmental stress and adversity [SESA]) and MRI markers of CSVD using publicly available genome-wide association studies (GWAS) data. Inverse variance weighted (IVW) method was used for the primary causal estimates. Alternative MR approaches and extensive sensitivity analyses were conducted to ensure the robustness of the findings. Multivariable MR (MVMR) analysis was used to estimate the direct causal effects with adjustment of other known risk factors for CSVD. RESULTS: Genetically determined SESA was significantly associated with reduced fractional anisotropy (FA) (beta: -1.94, 95%CI: -3.04 to -0.84, p=5.29e-4), and associated with increased mean diffusivity (MD) (beta=1.55, 95%CI: 0.29 to 2.81, p=0.016) and white matter hyperintensities (WMH) (beta=0.25, 95% CI: 0.03 to 0.47, p=0.029) at the nominally significant level. MVMR analysis suggested the significant associations remained significant after accounting for body mass index (BMI), smoking, alcohol drinking, type 2 diabetes (T2D), hypertension, and depression. The other two neuroticism subclusters (depressed affect and worry) didn't have significant causal effects on the MRI markers. In the reverse MR analysis with the MRI markers as exposures, no significant associations were found. CONCLUSION: This study supported the casual role of SESA in the development of CSVD. Further research to explore the underlying mechanism are warranted.
ABSTRACT
Magnetic anisotropy and magnetic exchange interactions are crucial parameters that characterize the hybrid metal-organic interface, a key component of an organic spintronic device. It is shown that the incorporation of 4f RE atoms to hybrid metal-organic interfaces of CuPc/REAu2 type (RE = Gd, Ho) constitutes a feasible approach toward on-demand magnetic properties and functionalities. The GdAu2 and HoAu2 substrates differ in their magnetic anisotropy behavior. Remarkably, the HoAu2 surface promotes the inherent out-of-plane anisotropy of CuPc, owing to the match between the anisotropy axis of substrate and molecule. Furthermore, the presence of RE atoms leads to a spontaneous antiferromagnetic exchange coupling at the interface, induced by the 3d-4f superexchange interaction between the unpaired 3d electron of CuPc and the 4f electrons of the RE atoms. It is shown that 4f RE atoms with unquenched quantum orbital momentum ( L $L$ ), as it is the case of Ho, induce an anisotropic interfacial exchange coupling.
ABSTRACT
CrSbSe3âthe only experimentally validated one-dimensional (1D) ferromagnetic semiconductorâhas recently attracted significant attention. However, all reported synthesis methods for CrSbSe3 nanocrystals are based on top-down methods. Here we report a template selection strategy for the bottom-up synthesis of CrSbSe3 nanoribbons. This strategy relies on comparing the formation energies of potential binary templates to the ternary target product. It enables us to select Sb2Se3 with the highest formation energy, along with its 1D crystal structure, as the template instead of Cr2Se3 with the lowest formation energy, thereby facilitating the transformation from Sb2Se3 to CrSbSe3 by replacing half of the Sb atoms in Sb2Se3 with Cr atoms. The as-prepared CrSbSe3 nanoribbons exhibit a length of approximately 5 µm, a width ranging from 80 to 120 nm, and a thickness of about 5 nm. The single CrSbSe3 nanoribbon presents typical semiconductor behavior and ferromagnetism, confirming the intrinsic ferromagnetism in the 1D CrSbSe3 semiconductor.
ABSTRACT
Secondary healing of fractured bones requires an application of an appropriate fixator. In general, steel or titanium devices are used mostly. However, in recent years, composite structures arise as an attractive alternative due to high strength to weight ratio and other advantages like, for example, radiolucency. According to Food and Drug Administration (FDA), the only unidirectionally reinforced composite allowed to be implanted in human bodies is carbon fiber (CF)-reinforced poly-ether-ether-ketone (PEEK). In this work, the healing process of long bone assembled with CF/PEEK plates with cross- and angle-ply lay-up configurations is studied in the framework of finite element method. The healing is simulated by making use of the mechanoregulation model basing on the Prendergast theory. Cells transformation is determined by the octahedral shear strain and interstitial fluid velocity. The process runs iteratively assuming single load cycle each day. The fracture is subjected to axial and transverse forces. In the computations, the Abaqus program is used. It is shown that the angle-ply lamination scheme of CF/PEEK composite seems to provide better conditions for the transformation of the soft callus into the bone tissue.
Subject(s)
Benzophenones , Bone Plates , Carbon Fiber , Fracture Healing , Ketones , Polyethylene Glycols , Polymers , Ketones/chemistry , Carbon Fiber/chemistry , Polyethylene Glycols/chemistry , Polymers/chemistry , Humans , Carbon/chemistry , Fractures, Bone , Finite Element AnalysisABSTRACT
Traditionally, the acquisition of 2D materials involved the exfoliation of layered crystals. However, the anisotropic bonding arrangements within 3D crystals indicate they are mechanically reminiscent of 2D counterparts and could also be exfoliated into nanosheets. This report delineates the preparation of 2D nanosheets from six representative 3D metal-organic frameworks (MOFs) through liquid-phase exfoliation. Notably, the cleavage planes of exfoliated nanosheets align perpendicular to the direction of the minimum elastic modulus (Emin) within the pristine 3D frameworks. The findings suggest that the in-plane and out-of-plane bonding forces of the exfoliated nanosheets can be correlated with the maximum elastic modulus (Emax) and Emin of the 3D frameworks, respectively. Emax influences the ease of cleaving adjacent layers, while Emin governs the ability to resist cracking of layers. Hence, a combination of large Emax and small Emin indicates an efficient exfoliation process, and vice versa. The ratio of Emax/Emin, denoted as Amax/min, is adopted as a universal index to quantify the ease of mechanical exfoliation for 3D MOFs. This ratio, readily accessible through mechanical experiments and computation, serves as a valuable metric for selecting appropriate exfoliation methods to produce surfactant-free 2D nanosheets from various 3D materials.
ABSTRACT
A study on the absorption and fluorescence properties of the 8-anilino-1-naphthalenesulfonate (ANS) fluorescent probe was performed in order to (i) verify the validity of its classification as hydrophobic probe and (ii) to assess the reliability of the interpretation of the ANS fluorescence enhancement upon protein binding as the evidence for the existence of hydrophobic binding sites on the protein molecules. We observed an enhancement of the ANS fluorescence in hydrophilic media: DMSO, polyethylene glycol (PEG400) and glycerol to the values characteristic of ANS complexes with globular proteins, and all ANS fluorescence characteristics (except anisotropy) in PEG400 and in complex with bovine serum albumin are identical. We observed an increase in the ANS fluorescence with a nonzero anisotropy in an aqueous medium in the presence of an amphiphilic cetyltrimethylammonium cation as a result of the formation of the 1:1 complex with ANS. Water molecules quench the fluorescence of ANS. The enhancement of the ANS fluorescence in aqueous media in the presence of fluorescence enhancers is accounted for by their blocking the access of water molecules to the region close to the excited ANS molecule, which is critical for the fluorescence.
ABSTRACT
Here, we investigated the complexation of short chain amylose (SCAs) and palmitic acid (PA), serving as polymeric building blocks that alter the selectivity and directionality of particle growth. This alteration affects the shape anisotropy of the particles, broadening their applications due to the increased surface area. By modifying the concentration of PA, we were able to make spherical, macaron, and disc-shaped particles, demonstrating that PA acts as a structure-directing agent. We further illustrated the lateral and longitudinal stacking kinetics between PA-SCA inclusion complexes during self-assembly, leading to anisotropy. Transmission electron microscope (TEM) and scanning electron microscope (SEM) revealed the structural difference between the initial and final morphologies of palmitic acid-short chain amylose particles (PA-SCAPs) compared to those of short-chain amylose particle (SCAPs). The presence of PA-SCA inclusion complex in the anisotropic particles was confirmed using nuclear magnetic resonance (NMR) and powder x-ray diffraction (XRD) analysis.
ABSTRACT
We have studied the magnetization dynamics of single Py(t) (t= 20 nm, 50 nm) and trilayer [Py(50)/Pd(tPd)/Py(20)] nanowire arrays fabricated over large areas using deep ultraviolet lithography technique. The dynamic properties are sensitive to the field orientation and magnetic film thicknesses. A single resonant mode corresponding to the excitations at the bulk part of the wire is detected in all the single-layer nanowire arrays. Furthermore, the spacer layer thickness influenced the dynamic properties in trilayer samples due to the different coupling mechanisms. A single resonant mode is observed intPd= 2 nm trilayer nanowires with a sharp frequency jump from 13 GHz to 15 GHz across the reversal regime. This indicates the exchange coupling and the coherence in magnetization precession in the ferromagnetic layers. On the other hand, wires with 10 nm-spacer display two well-resolved modes separated by â¼3 GHz with a gradual change in frequency across the reversal regime from-26mT to-46mT, indicating the presence of long-range dipolar interactions instead of exchange coupling. The spacer layer of the proposed spin-valve-type structure can be tailored for desired microwave splitters or combiners.
ABSTRACT
INTRODUCTION: We investigated the associations of leptin markers with cognitive function and magnetic resonance imaging (MRI) measures of brain atrophy and vascular injury in healthy middle-aged adults. METHODS: We included 2262 cognitively healthy participants from the Framingham Heart Study with neuropsychological evaluation; of these, 2028 also had available brain MRI. Concentrations of leptin, soluble leptin receptor (sOB-R), and their ratio (free leptin index [FLI]), indicating leptin bioavailability, were measured using enzyme-linked immunosorbent assays. Cognitive and MRI measures were derived using standardized protocols. RESULTS: Higher sOB-R was associated with lower fractional anisotropy (FA, ß = -0.114 ± 0.02, p < 0.001), and higher free water (FW, ß = 0.091 ± 0.022, p < 0.001) and peak-width skeletonized mean diffusivity (PSMD, ß = 0.078 ± 0.021, p < 0.001). Correspondingly, higher FLI was associated with higher FA (ß = 0.115 ± 0.027, p < 0.001) and lower FW (ß = -0.096 ± 0.029, p = 0.001) and PSMD (ß = -0.085 ± 0.028, p = 0.002). DISCUSSION: Higher leptin bioavailability was associated with better white matter (WM) integrity in healthy middle-aged adults, supporting the putative neuroprotective role of leptin in late-life dementia risk. HIGHLIGHTS: Higher leptin bioavailability was related to better preservation of white matter microstructure. Higher leptin bioavailability during midlife might confer protection against dementia. Potential benefits might be even stronger for individuals with visceral obesity. DTI measures might be sensitive surrogate markers of subclinical neuropathology.
ABSTRACT
In cryogenic electron microscopy (cryo-EM), specimen preparation remains a bottleneck despite recent advancements. Classical plunge freezing methods often result in issues like aggregation and preferred orientations at the air/water interface. Many alternative methods have been proposed, but there remains a lack a universal solution, and multiple techniques are often required for challenging samples. Here, we demonstrate the use of lipid nanotubes with nickel NTA headgroups as a platform for cryo-EM sample preparation. His-tagged specimens of interest are added to the tubules, and they can be frozen by conventional plunge freezing. We show that the nanotubes protect samples from the air/water interface and promote a wider range of orientations. The reconstruction of average subtracted tubular regions (RASTR) method allows for the removal of the nanotubule signal from the cryo-EM images resulting in isolated images of specimens of interest. Testing with ß-galactosidase validates the method's ability to capture particles at lower concentrations, overcome preferred orientations, and achieve near-atomic resolution reconstructions. Since the nanotubules can be identified and targeted automatically at low magnification, the method enables fully automated data collection. Furthermore, the particles on the tubes can be automatically identified and centered using 2D classification enabling particle picking without requiring prior information. Altogether, our approach that we call specimen preparation on a tube RASTR holds promise for overcoming air-water interface and preferred orientation challenges and offers the potential for fully automated cryo-EM data collection and structure determination.
ABSTRACT
The Mercury Sulphohalides have attracted significant attention in the fields of solar cells and thermoelectric applications. This study delves into the fundamental characteristics, including structural, elasticity, electronic behavior, phonon stability, optical properties, and transport features of AgHgSZ (Z = Br, I) through computational simulations based on Density Functional Theory (DFT) using WIEN2k software. Meticulous calculations of the phonon band structure ensure dynamic stability. The semiconductor nature with indirect band gaps (1.833 eV and 1.832 eV) for Mercury Sulphohalides (Br, I), as revealed by their band structures, suggests diverse photovoltaic and transport applications. Mechanical assessments show stable ductility for AgHgSBr and brittleness for AgHgSI, along with anisotropy and resistance to scratching. Optical properties exhibit anisotropy and significant UV absorption. Analysis of effective masses, exciton binding energy, and exciton Bohr radius suggests low exciton binding energy and classification under Mott-Wannier excitons. Positive thermopower results indicate holes as the predominant charge carriers in AgHgSBr and AgHgSI materials. Moreover, essential thermoelectric factors are examined, revealing the compounds' potential for thermoelectric applications. Notably, the figure of merit (ZT) at 300 K for AgHgSBr and AgHgSI are calculated to be 0.41 and 0.13, respectively. While these values are low at 300 K, they indicate promising potential for thermoelectric applications at higher temperatures. In summary, this investigation provides valuable understanding into the photovoltaic and thermoelectric properties of AgHgSZ (Z = Br, I) materials, potentially paving the way for further exploration in this domain.
ABSTRACT
Additive manufacturing (AM) is a technology that builds parts layer by layer. Over the past decade, metal additive manufacturing (AM) technology has developed rapidly to form a complete industry chain. AM metal parts are employed in a multitude of industries, including biomedical, aerospace, automotive, marine, and offshore. The design of components can be improved to a greater extent than is possible with existing manufacturing processes, which can result in a significant enhancement of performance. Studies on the anisotropy of additively manufactured metallic materials have been reported, and they describe the advantages and disadvantages of preparing different metallic materials using additive manufacturing processes; however, there are few in-depth and comprehensive studies that summarize the microstructural and mechanical properties of different types of additively manufactured metallic materials in the same article. This paper begins by outlining the intricate relationship between the additive manufacturing process, microstructure, and metal properties. It then explains the fundamental principles of powder bed fusion (PBF) and directed energy deposition (DED). It goes on to describe the molten pool and heat-affected zone in the additive manufacturing process and analyzes their effects on the microstructure of the formed parts. Subsequently, the mechanical properties and typical microstructures of additively manufactured titanium alloys, stainless steel, magnesium-aluminum alloys, and high-temperature alloys, along with their anisotropy, are summarized and presented. The summary indicates that the factors leading to the anisotropy of the mechanical properties of metallic AM parts are either their unique microstructural features or manufacturing defects. This anisotropy can be improved by post-heat treatment. Finally, the most recent research on the subject of metal AM anisotropy is presented.
ABSTRACT
The yield behavior of aluminum alloy 5754-H111 under different stress conditions for three kinds of plastic work is studied using an anisotropic Drucker model. It is found that when the plastic work is 30 MPa, the anisotropic Drucker model has the most accurate prediction. Comparing the Hill48 and Yld91 models with the Drucker model, the results show that both the anisotropic Drucker and Yld91 models can accurately predict the yield behavior of the alloy. Cylinder drawing finite element analysis is performed under the AFR, but it is not possible to accurately predict the position and height of earing appearance. The anisotropic Drucker model is used to predict the earing behavior under the non-AFR, which can accurately predict the earing phenomenon. Numerical simulation is conducted using three different combinations of yield functions: the anisotropic yield function and the anisotropic plastic potential function (AYAPP), the anisotropic yield function and the isotropic plastic potential function (AYIPP), and the isotropic yield function and the anisotropic plastic potential function (IYAPP). It is concluded that the influence of the plastic potential function on predicting earing behavior is more critical than that of the yield function.
ABSTRACT
Nature provides us with a wealth of inspiration for the design of bionic functional surfaces. Numerous types of plant leaves with exceptional wettability, anisotropy, and adhesion are extensively employed in many engineering applications. Inspired by the wettability, anisotropy, and adhesion of indocalamus leaves, bionic upper and lower surfaces (BUSs and BLSs) of the indocalamus leaf were successfully prepared using a facile approach combining laser scanning and chemical modification. The results demonstrated the BUSs and BLSs obtained similar structural features to the upper and lower surfaces of the indocalamus leaf and exhibited enhanced and more-controllable wettability, anisotropy, and adhesion. More importantly, we conducted a detailed comparative analysis of the wettability, anisotropy, and adhesion between BUSs and BLSs. Finally, BUSs and BLSs were also explored for the corresponding potential applications, including self-cleaning, liquid manipulation, and fog collection, thereby broadening their practical utility. We believe that this study can contribute to the enrichment of the research on novel biological models and provide significant insights into the development of multifunctional bionic surfaces.