ABSTRACT
China is the most important steel producer in the world, and its steel industry is one of the most carbon-intensive industries in China. Consequently, research on carbon emissions from the steel industry is crucial for China to achieve carbon neutrality and meet its sustainable global development goals. We constructed a carbon dioxide (CO2) emission model for China's iron and steel industry from a life cycle perspective, conducted an empirical analysis based on data from 2019, and calculated the CO2 emissions of the industry throughout its life cycle. Key emission reduction factors were identified using sensitivity analysis. The results demonstrated that the CO2 emission intensity of the steel industry was 2.33 ton CO2/ton, and the production and manufacturing stages were the main sources of CO2 emissions, accounting for 89.84% of the total steel life-cycle emissions. Notably, fossil fuel combustion had the highest sensitivity to steel CO2 emissions, with a sensitivity coefficient of 0.68, reducing the amount of fossil fuel combustion by 20% and carbon emissions by 13.60%. The sensitivities of power structure optimization and scrap consumption were similar, while that of the transportation structure adjustment was the lowest, with a sensitivity coefficient of less than 0.1. Given the current strategic goals of peak carbon and carbon neutrality, it is in the best interest of the Chinese government to actively promote energy-saving and low-carbon technologies, increase the ratio of scrap steel to steelmaking, and build a new power system.
Subject(s)
Carbon Dioxide , Carbon Footprint , Steel , China , Carbon Dioxide/analysis , Air Pollutants/analysis , Metallurgy , Environmental Monitoring , Industry , Air Pollution/statistics & numerical data , Air Pollution/prevention & controlABSTRACT
Excess CO2 accumulated in soils is typically transported to the atmosphere through molecular diffusion along a concentration gradient. Because of the slow and constant nature of this process, a steady state between peat CO2 production and emissions is often established. However, in peatland ecosystems, high peat porosity could foster additional non-diffusive transport processes, whose dynamics may become important to peat CO2 storage, transport and emission. Based on a continuous record of in situ peat pore CO2 concentration within the unsaturated zone of a raised bog in southern Canada, we show that changes in wind speed create large diel fluctuations in peat pore CO2 store. Peat CO2 builds up overnight and is regularly flushed out the following morning. Persistently high wind speed during the day maintains the peat CO2 with concentrations close to that of the ambient air. At night, wind speed decreases and CO2 production overtakes the transport rate leading to the accumulation of CO2 in the peat. Our results indicate that the effective diffusion coefficient fluctuates based on wind speed and generally exceeds the estimated molecular diffusion coefficient. The balance between peat CO2 accumulation and transport is most dynamic within the range of 0-2 m s-1 wind speeds, which occurs over 75% of the growing season and dominates night-time measurements. Wind therefore drives considerable temporal dynamics in peat CO2 transport and storage, particularly over sub-daily timescales, such that peat CO2 emissions can only be directly related to biological production over longer timescales. Supplementary Information: The online version contains supplementary material available at 10.1007/s10021-024-00904-1.
ABSTRACT
Molecular catalysts offer a unique opportunity to implement different chemical functionalities to steer the efficiency and selectivity for the CO2 reduction for instance. Metalloporphyrins and metallophthalocyanines are under high scrutiny since their most classic derivatives the tetraphenylporphyrin (TPP) and parent phthalocyanine (Pc), have been used as the molecular platform to install, hydrogen bonds donnors, proton relays, cationic fragments, incorporation in MOFs and COFs, to enhance the catalytic power of these catalysts. Herein, we examine the electrocatalytic properties of the tetramethyl cobalt (II) tetrapyridinoporphyrazine (CoTmTPyPz) for the reduction of CO2 in heterogeneous medium when adsorbed on carbon nanotubes (CNT) at a carbon paper (CP) electrode. Unlike reported electrocatalysis with cobalt based phthalocyanine where CO was advocated as the two electron and two protons reduced intermediate on the way to the formation of methanol, we found here that CoTmTPyPz does not reduce CO to methanol. Henceforth, ruling out a mechanistic pathway where CO is a reaction intermediate.
ABSTRACT
We introduced a new class of gas diffusion electrodes (GDEs) with adjustable pore morphology. We fabricated intrinsically conductive polymer-composite membranes containing carbon filler, enabling a pore structure variation through film casting cum phase separation protocols. We further selectively functionalized specific pore regions of the membranes with Cu by a NaBH4-facilitated coating strategy. The as-obtained GDEs can facilitate the electrochemical CO2 reduction reaction (CO2RR) at Cu active sites that are presented inside a defined and electrically conductive pore system. When employing them as free-standing cathodes in a CO2 flow electrolyzer, we achieved >70% Faradaic efficiencies for CO2RR products at up to 200 mA/cm2. We further demonstrated that deposition of a dense Cu layer on top of the membrane leads to obstruction of the underlying pore openings, inhibiting an excessive wetting of the pore pathways that transport gaseous CO2. However, the presentation of Cu inside the pore system of our novel membrane electrodes increased the C2H4/CO selectivity by a factor of up to 3 compared to Cu presented in the dense layer on top of the membrane. Additionally, we found that gaseous CO2 could still access Cu in macropores after wetting with electrolyte, while CO2RR was completely suppressed in wetted nm-scale pores.
ABSTRACT
Background: Carbon dioxide (CO2), traditionally viewed as a mere byproduct of cellular respiration, plays a multifaceted role in human physiology beyond simple elimination through respiration. CO2 may regulate the tumor microenvironment by significantly affecting the release of oxygen (O2) to tissues through the Bohr effect and by modulating blood pH and vasodilation. Previous studies suggest hypercapnia (elevated CO2 levels) might trigger optimized cellular mechanisms with potential therapeutic benefits. The role of CO2 in cellular stress conditions within tumor environments and its impact on O2 utilization offers a new investigative area in oncology. Objectives: This study aims to explore CO2's role in the tumor environment, particularly how its physiological properties and adaptive responses can influence therapeutic strategies. Methods: By applying a structured translational approach using the Work Breakdown Structure method, the study divided the analysis into six interconnected work packages to comprehensively analyze the interactions between carbon dioxide and the tumor microenvironment. Methods included systematic literature reviews, data analyses, data integration for identifying critical success factors and exploring extracellular environment modulation. The research used SMART criteria for assessing innovation and the applicability of results. Results: The research revealed that the human body's adaptability to hypercapnic conditions could potentially inform innovative strategies for manipulating the tumor microenvironment. This could enhance O2 utilization efficiency and manage adaptive responses to cellular stress. The study proposed that carbon dioxide's hormetic potential could induce beneficial responses in the tumor microenvironment, prompting clinical protocols for experimental validation. The research underscored the importance of pH regulation, emphasizing CO2 and carbonic acid's role in modulating metabolic and signaling pathways related to cancer. Conclusion: The study underscores CO2 as vital to our physiology and suggests potential therapeutic uses within the tumor microenvironment. pH modulation and cellular oxygenation optimization via CO2 manipulation could offer innovative strategies to enhance existing cancer therapies. These findings encourage further exploration of CO2's therapeutic potential. Future research should focus on experimental validation and exploration of clinical applications, emphasizing the need for interdisciplinary and collaborative approaches to tackle current challenges in cancer treatment.
ABSTRACT
BACKGROUND: The selection of adequate indicators of tissue hypoxia for guiding the resuscitation process of septic patients is a highly relevant issue. Current guidelines advocate for the use of lactate as sole metabolic marker, which may be markedly limited, and the integration of different variables seems more adequate. In this study, we explored the metabolic profile and its implications in the response to the administration of a fluid challenge in early septic shock patients. METHODS: Observational study including septic shock patients within 24 h of ICU admission, monitored with a cardiac output estimation system, with ongoing resuscitation. Hemodynamic and metabolic variables were measured before and after a fluid challenge (FC). A two-step cluster analysis was used to define the baseline metabolic profile, including lactate, central venous oxygen saturation (ScvO2), central venous-to-arterial carbon dioxide difference (PcvaCO2), and PcvaCO2 corrected by the difference in arterial-to-venous oxygen content (PcvaCO2/CavO2). RESULTS: Seventy-seven fluid challenges were analyzed. Cluster analysis revealed two distinct metabolic profiles at baseline. Cluster A exhibited lower ScvO2, higher PcvaCO2, and lower PcvaCO2/CavO2. Increases in cardiac output (CO) were associated with increases in VO2 exclusively in cluster A. Baseline isolated metabolic variables did not correlate with VO2 response, and changes in ScvO2 and PcvaCO2 were associated to VO2 increase only in cluster A. CONCLUSIONS: In a population of early septic shock patients, two distinct metabolic profiles were identified, suggesting tissue hypoxia or dysoxia. Integrating metabolic variables enhances the ability to detect those patients whose VO2 might increase as results of fluid administration.
Subject(s)
Fluid Therapy , Shock, Septic , Humans , Shock, Septic/metabolism , Shock, Septic/therapy , Shock, Septic/physiopathology , Male , Fluid Therapy/methods , Female , Middle Aged , Cluster Analysis , Aged , Hypoxia/metabolism , Cardiac Output/physiology , Lactic Acid/blood , Lactic Acid/metabolism , Oxygen/metabolism , Oxygen/blood , Prospective StudiesABSTRACT
Near UV and visible light photodegradation can target therapeutic proteins during manufacturing and storage. While the underlying photodegradation pathways are frequently not well-understood, one important aspect of consideration is the formulation, specifically the formulation buffer. Citrate is a common buffer for biopharmaceutical formulations, which can complex with transition metals, such as Fe(III). In an aqueous solution, the exposure of such complexes to light leads to the formation of the carbon dioxide radical anion (â¢CO2-), a powerful reductant. However, few studies have characterized such processes in solid formulations. Here, we show that solid citrate formulations containing Fe(III) lead to the photochemical formation of â¢CO2-, identified through DMPO spin trapping and HPLC-MS/MS analysis. Factors such as buffers, the availability of oxygen, excipients, and manufacturing processes of solid formulations were evaluated for their effect on the formation of â¢CO2- and other radicals such as â¢OH.
ABSTRACT
Introduction: Vitiligo is an acquired skin pigmentation disorder, the cause of which is poorly understood. Researchers in this field are dedicated to exploring novel treatments for achieving re-pigmentation. Methods: Mice were randomly selected and divided into control, model, and model+laser groups. Evaluate the impact of different levels of carbon dioxide laser irradiation on tyrosinase activity, melanocyte viability, and melanin content. Results: In this study, it was found that the cell viability and melanin content were significantly enhanced in human melanocytes after treatment with different energy densities of fractional carbon dioxide laser. In addition, laser-treated vitiligo mouse models showed mild pathological changes. Discussion: Therefore, we believe that fractional carbon dioxide laser may be a potential adjunctive modality for treating vitiligo.
ABSTRACT
Although mangrove forests are great carbon sinks, they also release carbon dioxide (CO2) from soil, plants, and water through respiration. Many studies have focused on CO2 effluxes only from soils, but the role of biogenic structures such as pneumatophore roots has been poorly studied. Hence, CO2 effluxes from pneumatophores were quantified at sediment-air (non-flooded sediment) and water-air (flooded sediment) interfaces along a salinity gradient in three mangrove types (fringe, scrub, and basin) dominated by Avicennia germinans during the dry and rainy seasons in Yucatan, Mexico. Pneumatophore abundance explained up to 91% of CO2 effluxes for scrub, 87% for fringe, and 83% for basin mangrove forests at the water-air interface. Overall, CO2 effluxes were inversely correlated with temperature and salinity. The highest CO2 effluxes were in the fringe and the lowest were in the scrub mangrove forests. Flooding decreased CO2 effluxes from the dry to the rainy season in all mangrove forests. These results highlight the contribution of pneumatophores to mangrove respiration, and the need to include them in our current carbon budgets and models, but considering different exchange interfaces, seasons, and mangrove ecotypes.
ABSTRACT
PURPOSE: Research has demonstrated negative environmental impacts from in-person conferences. Nonetheless, there are benefits to in-person meetings. The 2023 American Pediatric Surgical Association (APSA) meeting was mostly attended in-person. To understand the environmental impact, this study quantifies the travel emissions generated from that meeting. METHODS: The 2023 APSA meeting was held in Orlando, FL. Using a de-identified list of attendees, the distance between the attendee's home city and Orlando was determined. If ≤ 200 miles, it was assumed the attendee drove. If > 200 miles, the distance between the closest airport and Orlando International Airport was determined. Travel emissions factors represent emissions per person-mile traveled. The Environmental Protection Agency (EPA) Greenhouse Gas Inventory emissions factors for carbon dioxide (CO2), methane (CH4), and nitrous oxide (N2O) were multiplied by travel distances to determine the emissions generated from each attendee. These were aggregated to determine the total meeting travel emissions. The EPA Greenhouse Gas Equivalencies Calculator was used to convert the emissions to a relatable outcome. RESULTS: There were 757 in-person and 135 virtual attendees. Fifty attendees drove and 707 attendees flew. This generated 267,279 kg CO2, 1222 gm CH4, and 8486 gm N2O; equivalent to the emissions generated from the average annual use of 60 gasoline-powered passenger vehicles in the United States. CONCLUSION: Based on attendance to the 2023 APSA meeting, there is a preference for meeting in-person, though the associated environmental cost should be recognized. Based on these results, APSA should consider strategies to mitigate the environmental impact of its annual meeting. LEVELS OF EVIDENCE: N/A.
ABSTRACT
Porous ZIF-8 and ZIF-67 were synthesized via a green steam-assisted dry-gel technique and investigated as potential catalysts for CO2 electroreduction. The synthesis conditions are found to significantly influence the growth of these metal-organic frameworks (MOFs). Notably, the water content employed during synthesis plays a crucial role in shaping the morphological properties of ZIF-8. Specifically, a moderate water content results in the formation of uniform ZIF-8 with a size distribution ranging from 240 to 440 nm. During CO2 electroreduction, these morphological properties exert substantial effects on the selectivity for CO formation, thereby facilitating the production of syngas with adjustable CO: H2 ratios. This feature holds promise for the widespread adoption of syngas as a clean alternative to fossil fuels, offering potential benefits for electricity generation and liquid fuel production. Despite sharing similar structural properties with ZIF-8, ZIF-67 exhibits distinct performance characterized by its limited selectivity for CO2 electroreduction. This discrepancy is attributed to the different metal centers of the two MOFs, resulting in the distinct activation of CO2 and H2O molecules and their further reduction. This finding highlights the critical role of metal centers in MOF-based materials for electrocatalysis application.
ABSTRACT
This study explores the potential of Cucumaria frondosa (C. frondosa) viscera as a natural source of omega-3 FAs using supercritical carbon dioxide (scCO2) extraction. The extraction conditions were optimized using a response surface design, and the optimal parameters were identified as 75 °C and 45 MPa, with a 20 min static and a 30 min dynamic extraction, and a 2:1 ethanol to feedstock mass ratio. Under these conditions, the scCO2 extraction yielded higher FAs than the solvent-based Bligh and Dyer method. The comparative analysis demonstrated that scCO2 extraction (16.30 g of FAs/100 g of dried samples) yielded more fatty acids than the conventional Bligh and Dyer method (9.02 g, or 13.59 g of FAs/100 g of dried samples with ultrasonic assistance), indicating that scCO2 extraction is a viable, green alternative to traditional solvent-based techniques for recovering fatty acids. The pre-treatment effects, including drying methods and ethanol-soaking, were investigated. Freeze-drying significantly enhanced FA yields to almost 100% recovery, while ethanol-soaked viscera tripled the FA yields compared to fresh samples, achieving similar EPA and DHA levels to hot-air-dried samples. These findings highlight the potential of sea cucumber viscera as an efficient source of omega-3 FA extraction and offer an alternative to traditional extraction procedures.
Subject(s)
Carbon Dioxide , Fatty Acids, Omega-3 , Viscera , Animals , Carbon Dioxide/chemistry , Fatty Acids, Omega-3/isolation & purification , Fatty Acids, Omega-3/chemistry , Viscera/chemistry , Chromatography, Supercritical Fluid/methods , Cucumaria/chemistry , Sea Cucumbers/chemistry , Freeze DryingABSTRACT
BACKGROUND: Thoracoscopic esophagectomy (TE) with carbon dioxide (CO2) insufflation is increasingly performed for esophageal cancer; however, there is limited evidence of the long-term outcomes of CO2 insufflation on postoperative survival. OBJECTIVES: We investigated the long-term outcomes of TE with or without CO2 insufflation. METHODS: We enrolled 182 patients who underwent TE for esophageal cancer between January 2003 and October 2013 and categorized them into two groups: with and without CO2 insufflation. The primary endpoint was five-year overall survival (5y-OS). Secondary endpoints included long-term outcomes, such as five-year relapse-free survival (5y-RFS) and five-year cancer-specific survival (5y-CSS), and short-term outcomes, such as surgical and non-surgical complications and reoperation within 30 days. RESULTS: Follow-up until death or the five-year postoperative period was 98.9% (median follow-up duration was six years in survivors). After adjusting for age, sex, and yield pathologic tumor, node, and metastasis (TNM) stage, we found no significant differences in 5y-OS (HR 1.12, 95% CI 0.66-1.91), 5y-RFS (HR 1.12, 95% CI 0.67-1.83), or 5y-CSS rates (HR 1.00, 95% CI 0.57-1.75). For short-term outcomes, significant intergroup differences in operation time (p=0.02), blood loss (p<0.001), postoperative length of stay (p<0.001), and incidence of atelectasis (p=0.004) were observed. The results of the sensitivity analysis were similar to the main results. CONCLUSIONS: In thoracoscopic procedures, CO2 insufflation significantly improved short-term outcomes, and it appears that the recurrence risk of esophageal cancer may not impact the long-term prognosis. While the influence of CO2 insufflation in thoracoscopic esophageal surgery remains unclear, our study suggests that the long-term prognosis is not compromised in other thoracic surgeries.
ABSTRACT
The construction and optimization of microbial cell factories are crucial steps and key technologies in achieving green biomanufacturing. As concern has been aroused regarding the excessive carbon dioxide (CO2) emissions and food security, a new and promising research field, microbial conversion of CO2 into food compounds, has emerged. The research in this field not only holds significant implications for achieving the carbon peaking and carbon neutrality goals but also plays a role in maintaining food security. This paper provides a comprehensive review and outlook of the research on utilizing CO2 and its derived low-carbon chemicals for the production of food compounds, focusing on the production of glucose, sugar derivatives, and single-cell proteins and the development of artificial CO2 fixation pathways.
Subject(s)
Carbon Dioxide , Glucose , Carbon Dioxide/metabolism , Glucose/metabolism , Carbon/metabolism , Carbon/chemistry , Industrial Microbiology/methods , Bacteria/metabolismABSTRACT
Carbon dioxide (CO2) stands as the primary driver of Earth's greenhouse effect, and it's suggested that the global contribution of CO2 emissions from lakes cannot be ignored. Despite the numerous estimations of CO2 fluxes from lakes, limited focus has been directed towards the carbon isotopes (δ13C) of dissolved CO2 in lake water. Particularly, the potential use of δ13C values in tracing the CO2 concentrations in lake water remains as an understudied area, warranting further exploration and investigation. In this study, we conducted an analysis of the concentrations and δ13C values of dissolved CO2 in 33 lakes located at the Tibetan Plateau, Chinese Loess Plateau, and Yangtze Plain (among which high-resolution spatial investigations were performed in 6 lakes through in-situ continuous monitoring). Our findings revealed spatial variations in both the CO2 concentrations and δ13C values in lakes. Additionally, notable differences are observed among lakes in different regions of China, with lakes in the Yangtze Plain exhibiting considerably higher CO2 concentrations, and the overall CO2 δ13C values in lakes on the Tibetan Plateau tend to be more positive, while those in lakes on the Chinese Loess Plateau tend to be more negative. The pH values, dissolved oxygen, and dissolved organic carbon are likely crucial factors influencing the CO2 concentrations and δ13C values in the lakes. Furthermore, lake water CO2 concentrations are negatively correlated with δ13C values of CO2 and dissolved inorganic carbon (DIC) both within a single lake with high spatial resolutions or in lake groups across different regions. These results highlight that the CO2/DIC δ13C values can be applied to trace the concentration variations of dissolved CO2 in lakes.
ABSTRACT
Diamine-functionalized metal-organic frameworks (MOFs) based on Mg2(dobpdc) (dobpdc4- = 4,4'-dioxidobihyenyl-3,3'-dicarboxylate) have been frequently reported as promising CO2 adsorbents due to their characteristic step-shaped adsorption behavior. However, high CO2 desorption temperatures for diamine-Mg2(dobpdc)-based adsorbents led to gradual diamine loss while the existence of an exotic CO2 adsorption mode remains experimentally unanswered. Herein, we present CO2 adsorbents obtained by functionalizing Mn2(dobpdc) with a diaminopropane series. These adsorbents offer low regeneration energies, allowing CO2 desorption at lower temperatures than the reported Mg-based analogs. Our first-principles density functional theory calculations showed that the binding strength between the diamine and Mn ions in Mn2(dobpdc) was stronger than that between the diamine and Mg ions in Mg2(dobpdc), preventing diamine loss even at high temperatures and enabling efficient regeneration. Additionally, the computational and experimental data demonstrated that primary-tertiary diamine-functionalized MOFs exhibit one-channel flipped adsorption structures that have not been experimentally revealed. Our findings provide insights into the role of metal ions in diamine loss for the future development of efficient amine-based CO2 adsorbents.
ABSTRACT
BACKGROUND: Angiography with carbon dioxide (CO2) has long been used as an alternative when iodine contrast media (ICM) cannot be used due to allergy to iodine or renal dysfunction. Conversely, CO2 angiography is also known as a provocation method for active bleeding. In this study, we examined the efficacy of CO2 angiography in angioembolization (AE) for trauma patients. METHODS: This was a single-center, retrospective, observational study of trauma patients who underwent AE at our facility between January 2012 and April 2023. RESULTS: Within this period, 335 AEs were performed. CO2 angiography was performed in 102 patients (30.4%), and in 113 procedures. CO2angiography was used to provoke active bleeding which went undetected using ICM in 83 procedures, and to confirm hemostasis after embolization in 30 procedures. Of the 80 procedures wherein, active bleeding was not detected on ICM, 35 procedures (43.8%) were detected using CO2. The spleen had the highest detection rate of active bleeding by CO2 angiography among the organs. There were 4/102 (1.9%) patients with CO2 contrast who underwent some form of reintervention. Two patients were re-embolized with n-butyl-2-cyanoacrylate because of recanalization after embolization with gelatin sponge. The other two patients had pseudoaneurysm formation which required reintervention, and CO2 angiography was not used. Vomiting was the most common complication of CO2 angiography in 10 patients (9.8%), whereas all were transient and did not require treatment. CONCLUSIONS: CO2 angiography of trauma patients may have a better detection rate of active bleeding compared with ICM, leading to reliable hemostasis.
ABSTRACT
To investigate air-sea CO2 flux at the Qingdao nearshore site and its temporal variations, a high-resolution continuous observation of surface carbon dioxide partial pressure (pCO2) was carried out at Zhongyuan Pier near Tuandao from May 25 to July 8, 2019. It was observed that during this period, surface pCO2 varied between â¼490 and â¼690 µatm, mainly associated with sea surface temperature. Surface pCO2 also displayed substantial diurnal variations, with an average amplitude of 64 ± 21 µatm, largely dominated by biological activities. During the observational period, this site acted as a source of atmospheric CO2, releasing 361 mmol CO2 m-2. The notable diurnal variations in air-sea CO2 flux, such as the observed average amplitude of 10.9 mmol m-2 d-1 in this study, pose a challenge for accurately estimating the air-sea CO2 flux in coastal regions without high-resolution observations.
ABSTRACT
Silage is an excellent method of feed preservation; however, carbon dioxide, methane and nitrous oxide produced during fermentation are significant sources of agricultural greenhouse gases. Therefore, determining a specific production method is crucial for reducing global warming. The effects of four temperatures (10 °C, 20 °C, 30 °C, and 40 °C) on silage quality, greenhouse gas yield and microbial community composition of forage sorghum were investigated. At 20 °C and 30 °C, the silage has a lower pH value and a higher lactic acid content, resulting in higher silage quality and higher total gas production. In the first five days of ensiling, there was a significant increase in the production of carbon dioxide, methane, and nitrous oxide. After that, the output remained relatively stable, and their production at 20 °C and 30 °C was significantly higher than that at 10 °C and 40 °C. Firmicutes and Proteobacteria were the predominant silage microorganisms at the phylum level. Under the treatment of 20 °C, 30 °C, and 40 °C, Lactobacillus had already dominated on the second day of silage. However, low temperatures under 10 °C slowed down the microbial community succession, allowing, bad microorganisms such as Chryseobacterium, Pantoea and Pseudomonas dominate the fermentation, in the early stage of ensiling, which also resulted in the highest bacterial network complexity. According to random forest and structural equation model analysis, the production of carbon dioxide, methane and nitrous oxide is mainly affected by microorganisms such as Lactobacillus, Klebsiella and Enterobacter, and temperature influences the activity of these microorganisms to mediate gas production in silage. This study helps reveal the relationship between temperature, microbial community and greenhouse gas production during silage fermentation, providing a reference for clean silage fermentation.
Subject(s)
Fermentation , Greenhouse Gases , Microbiota , Silage , Sorghum , Temperature , Silage/analysis , Greenhouse Gases/analysis , Methane/metabolism , Methane/analysis , Carbon Dioxide/analysis , Nitrous Oxide/analysisABSTRACT
Electricity production is a significant source of air pollution. Various factors, including electricity demand, generation efficiency, energy mix, and end-of-pipe control measures, are responsible for the emission changes during electricity generation. Although electricity production more than doubled from 1990 to 2017, air pollutant emissions showed a moderate increase or decrease, which was attributed to mitigating drivers such as increased clean energy use, improved power generation efficiency, and widespread installation of end-of-pipe control facilities. The absence of these mitigating drivers would have increased CO2, fine particulate matter (PM2.5), black carbon, SO2, and NOx emissions in 2017 by 165 %, 403 %, 1070 %, 614 %, and 274 % than their actual levels, respectively. The improved electricity generation efficiency reduced potential CO2, PM2.5, SO2, and NOx emissions by 30 %, 295 %, 119 %, and 52 % compared to actual emissions, respectively. Meanwhile, the installation of end-of-pipe facilities reduced potential SO2 and PM2.5 emissions by 34.7 and 4.0 Tg, respectively. Considerable differences in emissions among countries were found to be attributable to their differences in electricity demand and the implementation of local mitigating polices.