Unveiling Morphological Diversity: An Anatomical Investigation of the Foramen Transversarium in the Cervical Vertebrae.

PURPOSE: This study aimed to investigate the morphological variations in the foramen transversarium of the cervical vertebrae and their clinical implications. Understanding these variations is crucial for accurate diagnosis, treatment planning, and surgical procedures involving the cervical spine. MATERIALS AND METHODS: This descriptive cross-sectional study was conducted at the AIl India Institute of Medical Sciences, Bibinagar, India, and involved 150 dry cervical vertebrae specimens. Measurements of the anteroposterior and transverse dimensions, as well as anatomical variations such as accessory foramina and bilateral symmetry, were recorded using vernier calipers. RESULTS: Out of 150 vertebrae, 149 had foramina on both sides, while one had a single foramen on the right. The anteroposterior diameter ranged from 1.0 to 10.0 mm on the right (mean: 5.13 ± 1.25 mm) and 2.0 to 8.5 mm on the left (mean: 5.08 ± 1.11 mm). The transverse diameter ranged from 2.0 to 9.0 mm on the right (mean: 5.54 ± 1.06 mm) and 2.0 to 8.0 mm on the left (mean: 5.42 ± 1.07 mm). Statistical analysis indicated symmetry in morphological dimensions. The morphological variations included unilateral and bilateral accessory foramina, incomplete accessory foramina, and asymmetrical foramina. Circular shapes were predominant (76% on the right, 75% on the left), with other shapes, such as oval and irregular shapes, being less common. CONCLUSION: These findings enhance the understanding of cervical spine anatomy, aiding in the interpretation of radiographic images and the planning of surgical procedures. This research highlights the need for precise anatomical knowledge to improve patient outcomes in cervical spine-related interventions.

Effects of Auricular Acupressure on Pain and Stress in Nursing College Students With Cervical Pain: A Single-Blind Placebo-Controlled Trial.

PURPOSE: This study aimed to examine the effects of auricular acupressure (AA) on neck pain and stress in nursing students with neck pain. METHODS: This single-blind, randomized, and placebo-controlled comparative pretest-posttest study involved administering AA for four weeks. The subjects included nursing students experiencing neck pain. The experimental group comprised 17 subjects, and the control group comprised 14 subjects. In the experimental group, AA was applied to the Shenmen, cervical vertebrae, shoulder, and liver areas to improve neck pain and reduce stress. In the control group, AA was applied to the anus, rectum, urethra, and external genitalia areas, which are not associated with neck pain and stress. To assess the intervention effects, NRS (Numeric Rating Scale), NDI (Neck Disability Index), and PSS (Perceived Stress Scale) scores were measured. RESULTS: The NRS scores in the experimental group with AA significantly decreased over time (F = 7.463, p < .001). The between group and group-by-time interaction results were F = 8.564, p = .007 and F = 3.252, p = .025, respectively. The NDI scores in the experimental group showed a statistically significant difference between the groups (F = 13.762, p = .001); however, there were no significant differences over time or in the group-by-time interaction (F = 1.086, p = .347) (F = .301, p = .757). The PSS scores in the experimental group decreased significantly over time (F = 5.557, p = .013), but there were no significant differences between the groups (F = .636, p = .432) or in the group-by-time interaction (F = .063, p = .891). CONCLUSION: AA applied for four weeks was found to be safe, noninvasive, and effective in reducing neck pain in nursing students with cervical pain.

Comparison of robotic or computer-assisted navigation versus fluoroscopic freehand techniques in the accuracy of posterior cervical screw placement during cervical spine surgery: a meta-analysis.

OBJECTIVE: Robot guidance (RG) and computer-assisted navigation (CAN) have been increasingly utilized for posterior cervical screw placement in cervical spine surgery, and cervical screw malposition may contribute to catastrophic complications. However, the superiority of the navigation using RG or CAN compared with conventional freehand (FH) techniques remains controversial, and no meta-analysis comparing the two methods in cervical spine surgery has been performed. METHODS: The PubMed, Embase, Web of Science, Cochrane, China National Knowledge Infrastructure, and Wanfang databases were searched for eligible literature. Studies reporting the primary outcomes of the accuracy of cervical screw placement using RG or CAN compared with FH techniques were included. Bias was evaluated using the Cochrane risk of bias criteria and the Newcastle-Ottawa Scale. The outcomes were evaluated in terms of odds ratio or standardized mean difference and corresponding 95% confidence interval. RESULTS: One randomized controlled trial and 18 comparative cohort studies published between 2012 and 2023 consisting of 946 patients and 4163 cervical screws were included in this meta-analysis. The RG and CAN techniques were associated with a substantially higher rate of optimal and clinically acceptable cervical screw accuracy than FH techniques. Furthermore, compared with the FH group, the navigation group showed fewer postoperative adverse events, less blood loss, shorter hospital lengths of stay, and lower postoperative Neck Disability Index scores. However, the navigation and FH groups had equivalent intraoperative times and postoperative visual analog scale and Japanese Orthopaedic Association scores at the final follow-up. CONCLUSIONS: Both RG and CAN are superior to FH techniques in terms of the accuracy of cervical screw placement. Navigation techniques, including RG and CAN methods, are accurate, safe, and feasible in cervical spine surgery.

Management of congenitally fused cervical vertebrae with Ayurveda intervention - A case report.

A 42-year-old male patient presented with complaints of vertigo, neck pain, swallowing difficulties, and difficulty in maintaining an upright posture. The patient took allopathic consultation for the complaints and was advised to undergo MDCT scan of brain, hematological and audiological evaluations. No abnormalities were detected in the investigations and he was given some medications for symptomatic management. As no relief was noted, the patient took an Ayurveda consultation. After clinical evaluation, the patient was advised to perform an X-ray of the cervical spine and was diagnosed with congenital block vertebrae at C3 - C4 vertebral bodies and posterior appendages with hypoplastic intervening disc space. He was advised to take Ekangveerarasa 250 mg BD before food with honey, Trayodashang guggulu 1 gm BD after food, Vishatinduka vati 250 mg BD after food, Aswagandha churna 3 gm BD after food with milk.The patient was also advised to do light massage and mild hot fomentation in the neck region twice a day with Mahavishagarbha oil. Remarkable relief was observed with all signs and symptoms including a reduction of score in the Neck Disability Index (NDI) within a very short duration of treatment. Considerable improvements were noted in the quality of life of the patient as confirmed by the WHO QOL BREF score. This case report shows that Ayurveda can offer safer and more effective symptomatic treatment for conditions like congenitally fused vertebrae.

Precaudal Vertebrae in the Postcranial Region of Moray Eels Form Ventral Processes.

Fish vertebrae are primarily morphologically classified into precaudal vertebrae jointed to the ribs and caudal vertebrae with hemal spines, through which the caudal artery and veins pass. Moray eels (family Muraenidae) capture prey by directly biting, combining oral and pharyngeal jaw. During feeding motions, they exhibit various head manipulations, such as neurocranial elevation, ventral flexion, and horizontal shaking, with their postcranial region acting like the neck of amniotes. However, the bone morphology supporting these movements remains unclear. In this study, the vertebral morphologies of the Kidako moray (Gymnothorax kidako), starry moray (Echidna nebulosa), pink-lipped moray (Echidna rhodochilus), tidepool snake moray (Uropterygius micropterus), and Seychelles moray (Anarchias seychellensis) were investigated using X-ray computed tomography. These five species exhibited longitudinal ventral processes in the second to approximately 12th precaudal vertebrae with canals for blood vessels, structurally similar to hemal spines. In addition, the morphology of the precaudal vertebrae in three Anguilliformes species closely related to moray eels and two Gasterosteiformes species, including a seahorse that flexes its head ventrally as a feeding motion, was compared with that of moray eels. However, no remarkable ventral processes were observed in their precaudal vertebrae in the postcranial region, suggesting that these structural features in the postcranial vertebrae were preserved in Muraenidae but not necessarily required for the fish to bend its head ventrally. Although the functional significance of the ventral process has yet to be determined, our findings highlight a novel aspect of fish vertebral morphology.

Cardiopulmonary Complications of Klippel-Feil Syndrome: A Case Report.

Klippel-Feil syndrome is characterized by the congenital synostosis of multiple cervical vertebrae and commonly presents with a multitude of congenital abnormalities, mainly including cardiac and respiratory defects. We present the case of a 39-year-old male with a prolonged history of cardiopulmonary symptoms whose investigations revealed restrictive lung disease, ventricular trigeminy and bigeminy, cervical vertebrae fusion, thoracic lumbar scoliosis, and mild-to-moderate pulmonary hypertension, all consistent with a diagnosis of Klippel-Feil syndrome. His management focused on preventing the progression of these findings while minimizing the effects of his extrinsic pulmonary restriction. Given the lack of guidelines in the management of such patients, this report highlights the role of early diagnosis and adequate management of such patients to reduce its progression and prevent the development of complications.

3D-printed neck phantoms with detailed anatomy for ultrasound-guided procedure and device testing.

Objectives: With rapid advances in ultrasound-guided procedures, there is an unmet need for echogenic phantoms with sufficient anatomical details for artificial intelligence and ultrasound-guided device testing. We developed a method for creating neck phantoms for novel otolaryngology-related device testing. To achieve accurate representation of the anatomy, we utilized CT scans and 3D printing technology to create customized agar molds, thus providing high-fidelity yet cost-effective tools. Methods: Based on previous studies, the key components in our neck phantom include the cervical vertebrae, trachea, common carotid arteries, internal jugular veins, thyroid gland, and surrounding soft tissue. Open-source image analysis software were employed to process CT data to generate high fidelity 3D models of the target structures. Resin molds were 3D printed and filled with various agar mixtures to mimic anatomical echogenicity. Results: Following the method proposed, we successfully assembled the neck phantom which provided a detailed representation of the target structures. To evaluate the results, ultrasound data was collected on the phantom and living tissue and analyzed with ImageJ. We were able to demonstrate echogenicity comparable to that of living tissue. Conclusion: The proposed method for building neck phantoms with detailed anatomical features offers a valuable, detailed, low-cost tool for medical training and device testing in otolaryngology, particularly for novel devices that involve artificial intelligence (AI) guidance and robotic-based needle insertion. Additional anatomical refinements and validation studies could further enhance the consistency and accuracy, thus paving the way for future advancements in ultrasound training and research, and ultimately benefiting patient care and safety.

Comparative analysis of contrast distribution in cervical epidural steroid injections utilizing a modified paramedian interlaminar approach with varied needle tip positions: A randomized controlled trial.

BACKGROUND: Recent advancements in cervical interlaminar epidural steroid injections have given rise to the modified paramedian interlaminar (mPIL) approach. The objective of this study was to perform an analysis of the contrast spread pattern within the cervical epidural space, taking into account different needle tip positions in the mPIL approach. METHODS: A total of 48 patients were included in the study and randomly assigned to either the medial or lateral group based on the needle tip's position in the anterior-posterior view. The primary outcome measured was the contrast flow under fluoroscopic visualization. As a secondary outcome, we analyzed the location of the needle tip position in both lateral and contralateral oblique views. Clinical effectiveness was assessed by measuring pain intensity and functional disability post-procedure. RESULTS: Significant disparities were noted in the ventral distribution of contrast between the medial and lateral groups. In the lateral images, needle tips in the lateral group were positioned more ventrally compared to those in the medial group. Both groups exhibited statistically significant improvements in neck and radicular pain, as well as functional status, 4 weeks after treatment, with no significant differences between them. CONCLUSIONS: Our results suggest that the ventral dispersion of contrast material during cervical interlaminar epidural steroid injections using the mPIL approach may vary depending on the needle tip location.

A machine learning-based approach for individualized prediction of short-term outcomes after anterior cervical corpectomy.

STUDY DESIGN: A retrospective machine learning (ML) classification study for prognostic modeling after anterior cervical corpectomy (ACC). PURPOSE: To evaluate the effectiveness of ML in predicting ACC outcomes and develop an accessible, user-friendly tool for this purpose. OVERVIEW OF LITERATURE: Based on our literature review, no study has examined the capability of ML algorithms to predict major shortterm ACC outcomes, such as prolonged length of hospital stay (LOS), non-home discharge, and major complications. METHODS: The American College of Surgeons' National Surgical Quality Improvement Program database was used to identify patients who underwent ACC. Prolonged LOS, non-home discharges, and major complications were assessed as the outcomes of interest. ML models were developed with the TabPFN algorithm and integrated into an open-access website to predict these outcomes. RESULTS: The models for predicting prolonged LOS, non-home discharges, and major complications demonstrated mean areas under the receiver operating characteristic curve (AUROC) of 0.802, 0.816, and 0.702, respectively. These findings highlight the discriminatory capacities of the models: fair (AUROC >0.7) for differentiating patients with major complications from those without, and good (AUROC >0.8) for distinguishing between those with and without prolonged LOS and non-home discharges. According to the SHapley Additive Explanations analysis, single- versus multiple-level surgery, age, body mass index, preoperative hematocrit, and American Society of Anesthesiologists physical status repetitively emerged as the most important variables for each outcome. CONCLUSIONS: This study has considerably enhanced the prediction of postoperative results after ACC surgery by implementing advanced ML techniques. A major contribution is the creation of an accessible web application, highlighting the practical value of the developed models. Our findings imply that ML can serve as an invaluable supplementary tool to stratify patient risk for this procedure and can predict diverse postoperative adverse outcomes.

Exploring the atlantic part of the vertebral artery in the South Indian population and its implications in spine surgery.

STUDY DESIGN: A descriptive, quantitative cross-sectional study of the atlantic part (V3) of the vertebral artery (VA). PURPOSE: This study aimed to bridge the research gap in the morphometry of the V3 segment of the VA in the South Indian population. OVERVIEW OF LITERATURE: The microsurgical anatomy of this segment of the VA has been explored in various populations, and a thorough understanding of the anatomy and course of the VA, particularly the V3 segment, is essential to prevent iatrogenic complications. Several computed tomography studies but a few cadaveric studies have explored the V3 segment of the VA in the South Indian population. METHODS: This study examined 40 VAs from 20 embalmed cadavers that were obtained from the voluntary donation program, and Institutional Ethical Clearance was obtained before the study. The length, diameter, and angle of the vertical, horizontal, and exit parts of the V3 segment of the VA were documented after its exposure. RESULTS: The mean lengths of the right and left VAs on each part were nearly similar, except for the mean length of the horizontal part (right: 38.937 mm, left: 40.237 mm) and total length of the V3 segment (right: 66.870 mm, left: 70.350 mm). CONCLUSIONS: These morphometric parameters are essential to spine surgeons who intend to operate on a small part (vertical, horizontal, or exit part) of the V3 segment of the VA. The mean values of the parameters obtained in this study give average measurements or safe limits to surgeons for safe surgical procedures such as the occipital condyle screw technique and C1 laminectomy.

Correlations of spheno-occipital synchondrosis, cervical vertebrae, midpalatal suture, and third molar maturation stages.

OBJECTIVES: To estimate the joint correlations among cervical vertebrae maturation (CVM), spheno-occipital synchondrosis (SOS), midpalatal suture maturation (MPS), and third molar mineralization (TMM) and to assess the predictive potential of SOS on CVM and MPS. MATERIALS AND METHODS: 570 pretreatment cone-beam computed tomogram (CBCT) scans from three private practices were analyzed, and MPS, CVM, SOS, and TMM stages were categorized and recorded by two independent investigators. Intra- and inter-rater reliability tests were evaluated with weighted Cohen's kappa tests. Spearman correlation coefficients for ordinal data were used to estimate the pairwise correlations among SOS, CVM, MPS, and TMM. To evaluate if SOS could predict CVM and MPS, ordinal regression models were estimated and cross-validated. RESULTS: The analysis demonstrated a robust positive correlation between SOS and CVM (r = 0.845) and between SOS and MPS (r = 0.742). A significant correlation was also observed between CVM and MPS (r = 0.659). Further correlations were identified between TMM and SOS (r = 0.444), TMM and MPS (r = 0.392), and TMM and CVM (r = 0.358). Ordinal regression models indicated the potential of using SOS as a predictive marker for CVM and MPS stages. CONCLUSIONS: With a comprehensive analysis, SOS is strongly correlated with CVM and MPS, and SOS stage can be used to predict CVM and MPS using ordinal regression. Since MPS stages are challenging to categorize due to their anatomy, this finding suggests a diagnostic tool using SOS stages or when more information on skeletal maturity of the patient is desired.

Does hydrogen peroxide help mitigate the incidence of Cutibacterium acnes in cervical spine surgeries?

Background: Surgical site infection (SSI) is a common yet serious complication of cervical spine surgery. While initially thought to be clinically insignificant, Cutibacterium acnes (C. acnes) is an important cause of infection. The purpose of this study was to investigate the ability of a hydrogen peroxide (H2O2) application during standard presurgical skin preparation to reduce the burden of C. acnes in patients undergoing cervical spine surgery. Methods: This was a retrospective review of prospectively collected data. Subjects were randomly assigned to either standard surgical preparation plus H2O2 (experimental) or without H2O2 (control). Prescrub, postscrub, and dermal cultures were obtained to assess the C. acnes burden after cultures on an aerobic and anaerobic growth medium were held for 21 days. Multivariate analysis was conducted to determine factors associated with presence of C. acnes. Outcome measures included the results of intraoperative cultures and the development of a SSI within 90 days postoperatively. Results: Patients (n=86) undergoing elective 2- or 3-level fusion via anterior approach were included. Prior to application of the antiseptic solution, 65% (28/43) of the experimental cohort and 77% (33/43) of the control cohort had positive C. acnes cultures (p=.34). Following application of antiseptic solution, there were no differences in positive C. acnes culture rates between the experimental and control cohorts in the epidermal (30% vs. 28%, p=1.00) or dermal (40% vs. 42%, p=1.00) cultures. No differences in the rates of C. acnes eradication from preantiseptic to postantiseptic application occurred for epidermal (p=1.00) or dermal (p=1.00) skin layers. None of the factors were associated with positive C. acnes epidermal cultures on multivariable logistic regression analysis (p>.05). Conclusions: While there is potential for H2O2 to reduce the positive culture rate of C. acnes in cervical spine patients, no difference was seen when compared to standard surgical skin preparation.

Variations in Foramen Transversarium in Typical Cervical Vertebra / Variaciones del Foramen transverso en una Vértebra Cervical Típica

SUMMARY: In literature were described variations in foramen transversarium in cervical vertebrae, as well as their clinical importance, and the information about them boils down to the individual case reports or population morphological studies. The aim of this paper is to contribute to the knowledge of morphological characteristics of the transverse openings on vertebrae of the cervical region. The study was performed on 60 typical vertebrae that are part of the collection of the Department of Anatomy in Nis. The characteristics of permanent openings were measured and accessory foramina were recorded. It was found that the diameter of the openings on the left side was 5.595±0.92 x 5.390±1.507 mm, and on the right 5.766±1.201 x 6.101±1.401 mm. Unilateral completely separated accessory foramina were recorded in 10.17 % of cases, dominant on the left side, and incompletely separated cases in 5.09 %. The research has demonstrated a relatively high incidence of accessory foramina and deviations from circular shaped openings.

En la literatura se describen variaciones en el foramen transverso de las vértebras cervicales, así como su importancia clínica, y la información sobre ellas se reduce a informes de casos individuales o estudios morfológicos poblacionales. El objetivo de este trabajo fue contribuir al conocimiento de las características morfológicas de los forámenes transversos de las vértebras cervicales. El estudio se realizó en 60 vértebras típicas que forman parte de la colección del Departamento de Anatomía de Nis. Se midieron las características de los forámenes constantes y se registraron los forámenes accesorios. Se encontró que el diámetro de los forámenes del lado izquierdo era de 5,595±0,92 x 5,390±1,507 mm, y del derecho de 5,766±1,201 x 6,101±1,401 mm. Se registraron forámenes accesorios unilaterales completamente separados en el 10,17 % de los casos, dominantes en el lado izquierdo y casos incompletamente separados en el 5,09 %. La investigación ha demostrado una incidencia relativamente alta de forámenes accesorios y desviaciones de forma circular.

Finite element analysis of a three-dimensional cervical spine model with muscles based on CT scan data.

BACKGROUND: The incidence of cervical spondylosis is increasing, gradually affecting people's normal lives. Establishing a finite element model of the cervical spine is one of the methods for studying cervical spondylosis. MRI (Magnetic Resonance Imaging) still has certain difficulties in transitioning from human imaging to establishing muscle models suitable for finite element analysis. Medical software provides specific morphologies and can generate muscle finite element models. Additionally, there is little research on the static analysis of cervical spine finite element models with solid muscle. PURPOSE: A new method is proposed for establishing a finite element model of the cervical spine based on CT (Computed Tomography) data and medical software, and the model's effectiveness is validated. Human movement characteristics based on the force distribution in various parts are analyzed and predicted. METHODS: The muscle model is reconstructed in medical software and a three-dimensional finite element model of the entire cervical spine (C0-C7) is established by combining muscle models with CT vertebral data models. 1.5 Nm of load is applied to the finite element model to simulate the cervical spine movement. RESULTS: The finite element model was successfully established, and effectiveness was verified. Stress variations in various parts under six movements were obtained. The effectiveness of the model was basically verified. CONCLUSION: The finite element model of the cervical spine for mechanical analysis can be successfully established by using medical software and CT data. In daily life, the C2-3, C3-4, C4-C5 intervertebral discs, rectus capitis posterior major, longus colli, and obliquus capitis inferior are more prone to injury.

The hidden value of MRI: modifying treatment decisions in C-spine injuries.

BACKGROUND DATA: Computed Tomography (CT) is the gold standard for cervical spine (c-spine) evaluation. Magnetic resonance imaging (MRI) emerges due to its increasing availability and the lack of radiation exposure. However, MRI is costly and time-consuming, questioning its role in the emergency department (ED). This study investigates the added the value of an additional MRI for patients presenting with a c-spine injury in the ED. METHODS: We conducted a retrospective monocenter cohort study that included all patients with neck trauma presenting in the ED, who received imaging based on the NEXUS criteria. Spine surgeons performed a full-case review to classify each case into "c-spine injured" and "c-spine uninjured". Injuries were classified according to the AO Spine classification. We assessed patients with a c-spine injury detected by CT, who received a subsequent MRI. In this subset, injuries were classified separately in both imaging modalities. We monitored the treatment changes after the additional MRI to evaluate characteristics of this cohort and the impact of the AO Spine Neurology/Modifier modifiers. RESULTS: We identified 4496 subjects, 2321 were eligible for inclusion and 186 were diagnosed with c-spine injuries in the retrospective case review. Fifty-six patients with a c-spine injury initially identified through CT received an additional MRI. The additional MRI significantly extended (geometric mean ratio 1.32, p < 0.001) the duration of the patients' stay in the ED. Of this cohort, 25% had a change in treatment strategy and among the patients with neurological symptoms (AON ≥ 1), 45.8% experienced a change in treatment. Patients that were N-positive, had a 12.4 (95% CI 2.7-90.7, p < 0.01) times higher odds of a treatment change after an additional MRI than neurologically intact patients. CONCLUSION AND RELEVANCE: Our study suggests that patients with a c-spine injury and neurological symptoms benefit from an additional MRI. In neurologically intact patients, an additional MRI retains value only when carefully evaluated on a case-by-case basis.

Changes in lateral standing posture following orthognathic surgery: a cohort study.

Altering neuromuscular and musculoskeletal relationships also affects standing body posture, particularly in the head and neck areas. This prospective cohort study assessed the effects of orthognathic surgery on head posture in the lateral standing view. Thirty-one patients who underwent single-jaw orthognathic mandibular surgery were included. The patients underwent cephalometric and photographic evaluations of their habitual posture before and 6 months after surgery. The craniovertebral angle and Frankfort angle were determined and measured using MB-Ruler software. Mandibular positional changes were also measured by superimposing lateral cephalograms and recording changes in the menton point. All data were analysed by paired t-test. The craniovertebral angle increased significantly in patients with Class II malocclusion (P = 0.001) and decreased significantly in Class III patients (P = 0.004). Furthermore, the Frankfort angle was significantly increased in both Class II (P = 0.005) and Class III (P = 0.012) patients. The tendency towards forward head posture decreased in Class II patients, and the neck posture improved. Conversely, a slight but significant tendency towards a forward head posture was observed in Class III patients after surgery. Furthermore, the natural head position changed in both study groups, leading to a more upright head posture.

Accuracy of Artificial Intelligence for Cervical Vertebral Maturation Assessment-A Systematic Review.

Background/Objectives: To systematically review and summarize the existing scientific evidence on the diagnostic performance of artificial intelligence (AI) in assessing cervical vertebral maturation (CVM). This review aimed to evaluate the accuracy and reliability of AI algorithms in comparison to those of experienced clinicians. Methods: Comprehensive searches were conducted across multiple databases, including PubMed, Scopus, Web of Science, and Embase, using a combination of Boolean operators and MeSH terms. The inclusion criteria were cross-sectional studies with neural network research, reporting diagnostic accuracy, and involving human subjects. Data extraction and quality assessment were performed independently by two reviewers, with a third reviewer resolving any disagreements. The Quality Assessment of Diagnostic Accuracy Studies (QUADAS)-2 tool was used for bias assessment. Results: Eighteen studies met the inclusion criteria, predominantly employing supervised learning techniques, especially convolutional neural networks (CNNs). The diagnostic accuracy of AI models for CVM assessment varied widely, ranging from 57% to 95%. The factors influencing accuracy included the type of AI model, training data, and study methods. Geographic concentration and variability in the experience of radiograph readers also impacted the results. Conclusions: AI has considerable potential for enhancing the accuracy and reliability of CVM assessments in orthodontics. However, the variability in AI performance and the limited number of high-quality studies suggest the need for further research.

Current practices of cervical epidural block for cervical radicular pain: a multicenter survey conducted by the Korean Pain Society.

Background: Cervical epidural block (CEB) is an effective intervention for managing cervical radicular pain. This study aimed to investigate the current status of performing CEB in South Korea. Methods: Pain physicians affiliated with the Korean Pain Society were asked to complete anonymous questionnaires regarding CEB between September and October 2022. The questionnaire consisted of 24 questions assessing the current status and methods of CEB in detail. Results: Of the 198 surveys collected, 171 physicians (86.4%) reported performing CEB. Among those, the majority (94.7%) used fluoroscopy during the procedure. The paramedian interlaminar (IL) approach was the most preferred method (50.3%). Respondents performing fluoroscopic-guided IL CEB were categorized into two groups based on clinical experience: those with ≤10 years of experience (≤10-year group, n = 91) and those with >10 years of experience (>10-year group, n = 71). The proportion of physicians obtaining informed consent in the ≤10-year group and >10-year group was 50.5% and 56.3%, respectively. When entering the epidural space during IL CEB, the contralateral oblique view was the second most frequently used in both groups (≤10-year group, 42.9%; >10-year group, 29.6%). In targeting the upper cervical lesions (C3-4), the proportion of respondents who used an IL space higher than C6-7 was 17.6% in the ≤10-year group and 29.5% in the >10-year experience group. Conclusions: This study demonstrated variability in the CEB technique used by pain physicians in South Korea. The findings highlight the need for education on informed consent and techniques to enhance safety.

Clinical and Radiological Outcomes in C2 Recapping Laminoplasty for the Pathologies in the Upper Cervical Spine.

OBJECTIVE: To evaluate C2 muscle preservation effect and the radiological and clinical outcomes after C2 recapping laminoplasty. METHODS: Fourteen consecutive patients who underwent C2 recapping laminoplasty around C1-2 level were enrolled. To evaluate muscle preservation effect, the authors conducted a morphological measurement of extensor muscles between the operated and nonoperated side. Two surgeons measured the cross-sectional area (CSA) of obliquus capitis inferior (OCI) and semispinalis cervicis (SSC) muscle before and after surgery to determine atrophy rates (ARs). Additionally, we examined range of motion (ROM), sagittal vertical axis (SVA), neck visual analogue scale (VAS), Neck Disability Index (NDI), and Japanese Orthopaedic Association (JOA) score to assess potential changes in alignment and consequent clinical outcomes following posterior cervical surgery. RESULTS: We measured the CSA of OCI and SSC before surgery, and at 6 and 12 months postoperatively. Based on these measurements, the AR of the nonoperated SSC was 0.1% ± 8.5%, the AR of the operated OCI was 2.0% ± 7.2%, and the AR of the nonoperated OCI was -0.7% ± 5.1% at the 12 months after surgery. However, the AR of the operated side's SSC was 11.2% ± 12.5%, which is a relatively higher value than other measurements. Despite the atrophic change of SSC on the operated side, there were no prominent changes observed in SVA, C0-2 ROM, and C2-7 ROM between preoperative and 12 months postoperative measurements, which were 11.8 ± 10.9 mm, 16.3° ± 5.9°, and 48.7° ± 7.7° preoperatively, and 14.1 ± 11.6 mm, 16.1° ± 7.2°, and 44.0° ± 10.3° at 12 months postoperative, respectively. Improvement was also noted in VAS, NDI, and JOA scores after surgery with JOA recovery rate of 77.3% ± 29.6%. CONCLUSION: C2 recapping laminoplasty could be a useful tool for addressing pathologies around the upper cervical spine, potentially mitigating muscle atrophy and reducing postoperative neck pain, while maintaining sagittal alignment and ROM.

Combined replantation of the posterior arch of the atlas and bilateral axial lamina in the treatment of intradural schwannoma: a case report.

Background: Laminotomy and laminar replantation have emerged as novel treatment modalities for intraspinal tumors, aiming to minimize postoperative complications and retain spinal mobility. However, existing research predominantly emphasizes their application in the thoracolumbar spine. The unique anatomy of the atlantoaxial segments necessitates surgical techniques that differ from those used in other spinal regions, and the clinical effect of such procedure remains unknown. Case presentation: A 61-year-old male patient with intradural schwannoma at the atlantoaxial level was operated on. The patient underwent posterior laminectomy, as well as a combined replantation of the posterior arch of the atlas and bilateral axial laminae. Postoperatively, the patient experienced significant neurological improvement, with no deformities or instability on the radiological assessments during the follow-up. Conclusion: Laminotomy with combined replantation of the posterior arch of the atlas and bilateral axial lamina emerges as an effective approach for managing intraspinal tumors at the atlantoaxial level. This technique not only offers ample operating space but also restores the stability of the spinal canal. Moreover, it preserves the mobility of the atlantoaxial segment, minimizes impact on adjacent segments, and mitigates the formation of postoperative fibrosis.