Synchronous optimization of H2O and H adsorption on NiO1-xTex nanodots for alkaline photocatalytic H2 evolution.

Suitable H2O and H adsorption on the surface of transition metal chalcogenide cocatalyst is highly required to achieve their excellent alkaline H2-evolution rate. However, the weak adsorption of H2O and H atoms on NiTe surface greatly hinders its alkaline H2-evolution efficiency. Herein, an electron-deficient modulation strategy is proposed to synchronously improve the adsorption of H2O and H atoms on NiTe surface, which can greatly improve the alkaline photocatalytic H2 evolution of TiO2. In this case, highly electronegative oxygen atoms are introduced into the NiTe cocatalysts to induce the formation of electron-deficient Niδ+ and Teδ+ sites in the ultra-small-sized NiO1-xTex nanodots (0.5-2 nm), which can be uniformly loaded onto the TiO2 surface to prepare the NiO1-xTex/TiO2 photocatalysts by a facile complexation-photodeposition strategy. The resulting NiO1-xTex/TiO2 (0.6:0.4) photocatalyst exhibits the optimal activity (2143.36 µmol g-1 h-1), surpassing the activity levels of TiO2 and NiTe/TiO2 samples by 42.3 and 1.8 times, respectively. The experimental and theoretical investigations have revealed that the presence of highly electronegative O atoms in the NiO1-xTex cocatalyst can redistribute the charges of Ni and Te atoms for the formation of electron-deficient Niδ+ and Teδ+ active sites, thereby synchronously enhancing the adsorption of H2O on Niδ+ sites and H on Teδ+ sites and promoting alkaline photocatalytic H2 evolution. The current research about the synchronous optimization of the H2O and H adsorption offers a significant approach to design high-performance H2-evolution materials.

Metal Cocatalyst Engineering in Metal-Semiconductor Hybrid Photocatalysts Achieves a Fivefold Enhancement of Hydrogen Evolution.

This study explores the optimal morphology of photochemical hydrogen evolution catalysts in a one-dimensional system. Systematic engineering of metal tips on precisely defined CdSe@CdS dot-in-rods is conducted to exert control over morphology, composition, and both factors. The outcome yields an optimized configuration, a Au-Pt core-shell structure with a rough Pt surface (Au@r-Pt), which exhibits a remarkable fivefold increase in quantum efficiency, reaching 86% at 455 nm and superior hydrogen evolution rates under visible and AM1.5G irradiation conditions with prolonged stability. Kinetic investigations using photoelectrochemical and time-resolved measurements demonstrate a greater extent and extended lifetime of the charge-separated state on the tips as well as rapid water reduction kinetics on high-energy surfaces. This approach sheds light on the critical role of cocatalysts in hybrid photocatalytic systems for achieving high performance.

Electrostatic Self-Assembly of CdS Quantum Dots with Co9S8 Hollow Nanotubes for Enhanced Visible Light Photocatalytic H2 Production.

CdS quantum dots (CdS QDs) are regarded as a promising photocatalyst due to their remarkable response to visible light and suitable placement of conduction bands and valence bands. However, the problem of photocorrosion severely restricts their application. Herein, the CdS QDs-Co9S8 hollow nanotube composite photocatalyst has been successfully prepared by loading Co9S8 nanotubes onto CdS QDs through an electrostatic self-assembly method. The experimental results show that the introduction of Co9S8 cocatalyst can form a stable structure with CdS QDs, and can effectively avoid the photocorrosion of CdS QDs. Compared with blank CdS QDs, the CdS QDs-Co9S8 composite exhibits obviously better photocatalytic hydrogen evolution performance. In particular, CdS QDs loaded with 30% Co9S8 (CdS QDs-30%Co9S8) demonstrate the best photocatalytic performance, and the H2 production rate reaches 9642.7 µmol·g-1·h-1, which is 60.3 times that of the blank CdS QDs. A series of characterizations confirm that the growth of CdS QDs on Co9S8 nanotubes effectively facilitates the separation and migration of photogenerated carriers, thereby improving the photocatalytic hydrogen production properties of the composite. We expect that this work will facilitate the rational design of CdS-based photocatalysts, thereby enabling the development of more low-cost, high-efficiency and high-stability composites for photocatalysis.

Simultaneous Defect Passivation and Co-catalyst Engineering Leads to Superior Photocatalytic Hydrogen Evolution on Metal Halide Perovskites.

Metal halide perovskites (MHPs) have emerged as attractive candidates for producing green hydrogen via photocatalytic pathway. However, the presence of abundant defects and absence of efficient hydrogen evolution reaction (HER) active sites on MHPs seriously limit the solar-to-chemical (STC) conversion efficiency. Herein, to address this issue, we present a bi-functionalization strategy through decorating MHPs with a molecular molybdenum-sulfur-containing co-catalyst precursor. By virtue of the strong chemical interaction between lead and sulfur and the good dispersion of the molecular co-catalyst precursor in the deposition solution, a uniform and intimate decoration of the MHPs surface with lead sulfide (PbS) and amorphous molybdenum sulfide (MoSx) co-catalysts is obtained simultaneously. We show that the PbS co-catalyst can effectively passivate the Pb-related defects on the MHPs surface, thus retarding the charge recombination and promoting the charge transfer efficiency significantly. The amorphous MoSx co-catalyst further promotes the extraction of photogenerated electrons from MHPs and facilitates the HER catalysis. Consequently, drastically enhanced photocatalytic HER activities are obtained on representative MHPs through the synergistic functionalization of PbS and MoSx co-catalysts. A solar-to-chemical (STC) conversion efficiency of ca. 4.63% is achieved on the bi-functionalized FAPbBr3-xIx, which is among the highest values reported for MHPs.

Synergistic effect of Na doping and CoSe2 cocatalyst for enhanced photocatalytic hydrogen evolution performance of ZnIn2S4.

Element doping has been demonstrated as a useful strategy to regulate the band gap and electronic structure of photocatalyst for improving photocatalytic activity. Herein, ZnIn2S4 (ZIS) nanosheets were doped with alkali metal ions (Li+, Na+ or K+) by a simple solution method. Experimental characterizations reveal that alkali metal ions doping reduce the band gap, raise the conduction band position, and improve surface hydrophilicity of ZIS. In addition, theoretical calculations show that Na doping increases the electron density at valence band maximum and surrounding S atom, which is conducive to produce more electrons and effective utilization of electrons, respectively. Benefited from above factors, Na-doped ZIS (Na-ZIS) shows the highest photocatalytic hydrogen evolution performance. Furthermore, CoSe2 cocatalyst is loaded on the surface of Na-ZIS (CS/Na-ZIS), which further improve the charge separation and prolong the lifetime of charges. As a result, the optimized CS/Na-ZIS shows a H2 evolution rate of 4525 µmol·g-1·h-1 with an apparent quantum efficiency of 27.5 % at 420 nm, which are much higher than that of pure ZIS. This study provides an in-depth understanding of the synergistic effect of Na doping and CoSe2 cocatalyst in ameliorating photocatalytic activity.

Ammonium Tetrakis(pentafluorophenyl)borate: Preparation and Application in Olefin Coordination Polymerization as the Cocatalyst Compound.

Metallocene catalysts have attracted much attention from academia and industry for their excellent catalytic activity in the field of olefin polymerization. Cocatalysts play a key role in metallocene catalytic systems, which can not only affect the overall catalytic activity, but also have an obvious influence on the structure and properties of the polymer. Although methylaluminoxane (MAO) is currently the most widely used cocatalyst, its price increases the production cost of polyolefin materials. Ammonium tetrakis(pentafluorophenyl)borate has shown excellent performance in polymerization, being one of the best substitutes for the traditional cocatalyst MAO. Compared with the main catalyst, whose composition and structure are relatively complex, the research on cocatalyst is very limited. This review mainly introduces the research history, preparation methods, and application progress in polymerization of ammonium tetrakis(pentafluorophenyl)borate, deepening our understanding of the role of cocatalyst in polymerization, with the hope of inspiring brand-new thinking on improving and enhancing the overall performance of catalyst systems.

Correlation between existential form of ruthenium cocatalyst and photocatalytic hydrogen evolution of carbon nitride.

Catalysts composed of nanocluster and single-atom (SA) were extensively used to enhance electrocatalytic water splitting performance, whereas study of their photocatalytic hydrogen (H2) evolution activity was limited. Herein, carbon nitride (CN) decorated by ruthenium (Ru) cocatalysts existed as SA + cluster, cluster + nanoparticles (NPs), and NPs were prepared by impregnation and calcination processes. The correlation between existential form, content of Ru cocatalyst and H2 evolution rate were carefully discussed. It was found that Ru NPs were favor for water molecule adsorption, whereas Ru SAs and clusters facilitated H2 desorption. Theoretical calculations revealed that Ru clusters + NPs cocatalyst were beneficial for H* intermediate formation. Water splitting tests found that 1.07 wt% Ru NPs + cluster modified CN showed the highest H2 evolution rate of 13.64 mmol h-1 g-1, which was 266.4 and 1.5 times higher than those of CN and Ru NPs (2.33 wt%) decorated CN, respectively. This work deeply reveals the influences of existential form of Ru cocatalysts on photocatalytic water splitting of CN, and provides thought in designing new cocatalysts to largely enhance H2 evolution.

Integrating bimetallic borides with g-C3N4 containing cyanamide defects for efficient photocatalytic nitrogen fixation.

The sustainable generation of ammonia by photocatalytic nitrogen fixation under mild conditions is fascinating compared to conventional industrial processes. Nevertheless, owing to the low charge transfer efficiency, the insufficient light absorption capacity and limited active sites of the photocatalyst cause the difficult adsorption and activation of N2 molecules, thereby resulting in a low photocatalytic conversion efficiency. Herein, a novel bimetallic CoMoB nanosheets (CoMoB) co-catalyst modified carbon nitride with dual moiety defects (CN-TH3/3) Schottky junction photocatalyst is designed for photocatalytic nitrogen reduction reaction (NRR). The photocatalytic nitrogen reduction rate of the optimized CoMoB/CN-TH3/3 photocatalyst is 4.81 mM·g-1·h-1, which is 6.2 and 2.2 times higher than carbon nitride (CN) (0.78 mM·g-1·h-1) and CN-TH3/3 (2.21 mM·g-1·h-1), respectively. The excellent photocatalytic NRR performance is ascribed not only to the introduction of dual moiety defects (cyano and cyanamide groups) that extends the visible light absorption range and promotes exciton polarization dissociation, but also to the formation of interfacial electric field between CoMoB and CN-TH3/3, which effectively facilitates the interfacial charge transfer. Thus, the synergistic interaction between CN-TH3/3 and CoMoB further increases the electron numble of CoMoB active sites, which effectively strengthens the adsorption and activation of N2 and weakens the NN triple bond, thereby enhancing the photocatalytic NRR activity. This work highlights the introduced dual moiety defects and bimetallic CoMoB co-catalyst to synergistically enhance the photocatalytic nitrogen reduction performance.

Recent Developments in Nickel-Based Layered Double Hydroxides for Photo(-/)electrocatalytic Water Oxidation.

Layered double hydroxides (LDHs), especially those containing nickel (Ni), are increasingly recognized for their potential in photo(-/)electrocatalytic water oxidation due to the abundant availability of Ni, their corrosion resistance, and their minimal toxicity. This review provides a comprehensive examination of Ni-based LDHs in electrocatalytic (EC), photocatalytic (PC), and photoelectrocatalytic (PEC) water oxidation processes. The review delves into the operational principles, highlighting similarities and distinctions as well as the benefits and limitations associated with each method of water oxidation. It includes a detailed discussion on the synthesis of monolayer, ultrathin, and bulk Ni-based LDHs, focusing on the merits and drawbacks inherent to each synthesis approach. Regarding the EC oxygen evolution reaction (OER), strategies to improve catalytic performance and insights into the structural evolution of Ni-based LDHs during the electrocatalytic process are summarized. Furthermore, the review extensively covers the advancements in Ni-based LDHs for PEC OER, including an analysis of semiconductors paired with Ni-based LDHs to form photoanodes, with a focus on their enhanced activity, stability, and underlying mechanisms facilitated by LDHs. The review concludes by addressing the challenges and prospects in the development of innovative Ni-based LDH catalysts for practical applications. The comprehensive insights provided in this paper will not only stimulate further research but also engage the scientific community, thus driving the field of photo(-/)electrocatalytic water oxidation forward.

Subtraction Descriptors in Machine Learning for Optimizing the Cocatalyst Effect of Cobalt Phosphate on Hematite Photoanodes.

In the quest for sustainable energy solutions, the optimization of the photoelectrochemical (PEC) performance of hematite photoanodes through cocatalysts represents a promising avenue. This study introduces a novel machine learning approach, leveraging subtraction descriptors, to isolate and quantify the specific effects of cobalt phosphate (Co-Pi) as a cocatalyst on hematite's PEC performance. By integrating data from various analytical techniques, including photoelectrochemical impedance spectroscopy and ultraviolet-visible spectroscopy, with advanced machine learning models, we successfully predicted the PEC performance enhancement attributed to Co-Pi. The Gaussian process regression (GPR) model emerged as the most effective, revealing the critical influence of the interfacial resistance, bulk resistance, and interfacial capacitance on the PEC performance. These findings underscore the potential of cocatalysts in improving charge separation and extending charge carrier lifetimes, thereby boosting the efficiency of photocatalytic reactions. This study not only advances our understanding of the cocatalyst effect in photocatalytic systems but also demonstrates the power of machine learning in modifying complex materials and guiding the development of optimized photocatalytic materials. The implications of this research extend beyond hematite photoanodes, offering a generalizable framework for enhancing the photoelectrochemical properties of a wide range of material modifications such as cocatalyst deposition, doping, and passivation.

Insights into the function of metallic 1T phase tungsten disulfide as cocatalyst decorated zinc indium sulfide for enhanced photocatalytic hydrogen production activity.

Improving the separation efficiency of carriers is an important part of enhancing photocatalytic activity. Herein, we successfully decorated metallic 1T phase tungsten disulfide (1T-WS2) on the surface of zinc indium sulfide (ZnIn2S4) and investigated the synergistic effect of 1T-WS2 on ZnIn2S4. The characterization results show that 1T-WS2 improves the light absorption capacity and utilization efficiency, increases the catalytic active site, improves the photogenerated charge separation efficiency, and optimizes the reduction potential of ZnIn2S4. Theoretical calculations show that compared with ZnIn2S4, 1T-WS2/ZnIn2S4 has a smaller adsorption Gibbs free energy of the intermediate state H*, which is conducive to the catalytic reaction. Under simulated solar irradiation, the hydrogen (H2) production rate of 1T-WS2/ZnIn2S4 with a loading of 12 wt% reaches 30.90 mmol h-1 g-1, which is 3.38 times higher than that of single ZnIn2S4 (9.13 mmol h-1 g-1). In addition, the apparent quantum efficiency of 1T-WS2/ZnIn2S4 with a loading of 12 wt% reaches 21.14 % under monochromatic light at a wavelength of λ = 370 nm. This work analyzes the light absorption and carrier separation to the catalytic site, and elucidates the mechanism for the enhancement of the photocatalytic hydrogen production performance.

A new Ni-based cocatalyst nickel thiocarbonate enhancing graphitic carbon nitride photocatalytic hydrogen production by constructing a built-in electric field.

Despite the excellent photocatalytic activity under visible light, graphitic carbon nitride (g-C3N4) exhibits a high overpotential for hydrogen evolution. To address this issue, cocatalysts have been utilized to modify g-C3N4. However, the use of high-performance cocatalysts typically involves noble metals such as platinum and palladium, which are cost-prohibitive for practical applications. Therefore, the development of efficient and cost-effective cocatalysts is crucial for advancing photocatalysis. In this study, we synthesized a new Ni-based cocatalyst, nickel thiocarbonate (NiCS3), to enhance the photocatalytic hydrogen evolution reaction (HER) on g-C3N4. The NiCS3/g-C3N4 composite demonstrated a significantly increased hydrogen evolution rate of 951 µmol·h-1·g-1 under visible light, representing more than a 105-fold improvement compared to pure g-C3N4. Theoretical calculations suggested that the enhanced performance in photocatalytic hydrogen production can be attributed to the generation of a built-in electric field within the composite, facilitating efficient charge carrier separation and migration. Additionally, the C site in NiCS3 provides a favorable Gibbs free energy of adsorbed H* (ΔGH∗). This work underscores the potential of NiCS3 as a viable alternative to precious metals in photocatalytic hydrogen production using g-C3N4.

Construction of Dual-Active Sites by Interfacing with Polyhydroxy Fullerene on Nickel Hydroxide Surfaces to Promote CO2 Deep Photoreduction to CH4.

Due to the complex series of elementary steps involved, achieving deep photoreduction of CO2 to multielectron products such as CH4 remains a challenging task. Therefore, it is crucial to strategically design catalysts that facilitate the controlled formation of the crucial intermediates and provide precise control over the reaction pathway. Herein, we present a pioneering approach by employing polyhydroxy fullerene (PHF) molecules to modify the surface of Ni(OH)2, creating stable and effective synergistic sites to enhance the formation of CH4 from CO2 under light irradiation. As a result, the optimized PHF-modified Ni(OH)2 cocatalyst achieves a CH4 production rate of 455 µmol g-1 h-1, with an electron-based selectivity of approximately 60%. The combination of in situ characterizations and theoretical calculations reveals that the hydroxyl species on the surface of PHF can participate in stabilizing crucial intermediates and facilitating water activation, thereby altering the reaction pathway to form CH4 instead of CO. This study provides a novel approach to regulating the selectivity of photocatalytic CO2 reduction by exploring molecular surface modification through interfacing with functionalized carbon clusters.

Structurally disordered MoSe2 with rich 1T phase as a universal platform for enhanced photocatalytic hydrogen production.

The improvement of surface reactivity in noble-metal-free cocatalysts is crucial for the development of efficient and cost-effective photocatalytic systems. However, the influence of crystallinity on catalytic efficacy has received limited attention. Herein, we report the utilization of structurally disordered MoSe2 with abundant 1T phase as a versatile cocatalyst for photocatalytic hydrogen evolution. Using MoSe2/carbon nitride (CN) hybrids as a case study, it is demonstrated that amorphous MoSe2 significantly enhances the hydrogen evolution rate of CN, achieving up to 11.37 µmol h-1, surpassing both low crystallinity (8.24 µmol h-1) and high crystallinity MoSe2 (3.86 µmol h-1). Experimental analysis indicates that the disordered structure of amorphous MoSe2, characterized by coordination-unsaturated surface sites and a rich 1T phase with abundant active sites at the basal plane, predominantly facilitates the conversion of surface-bound protons to hydrogen. Conversely, the heightened charge transfer capacity of the highly crystalline counterpart plays a minor role in enhancing practical catalytic performance. This approach is applicable for enhancing the photocatalytic hydrogen evolution performance of various semiconducting photocatalysts, including CdS, TiO2, and ZnIn2S4, thereby offering novel insights into the advancement of high-performance non-precious catalysts through phase engineering.

Understanding the Activation Mechanism of RhCrOx Cocatalysts for Hydrogen Evolution with Nanoparticulate Electrodes.

Mixed oxides of Rh-Cr (RhCrOx), containing Rh3+ and Cr3+ cations, are commonly used as cocatalysts for the hydrogen evolution reaction (HER) on particulate photocatalysts. The precise physicochemical mechanisms of the HER at the catalytic sites of these oxides are not well understood. In this study, model cocatalyst electrodes, composed of nanoparticulate RhCrOx, were fabricated to investigate the physicochemical mechanisms of the HER. Electroanalytical and X-ray photoelectron spectroscopic measurements revealed that nanoparticulate RhCrOx produces reduced Rh (Rh0) species by maintaining an electrode potential more negative than 0.03 V versus the reversible hydrogen electrode (VRHE). This results in significant enhancement of the HER activity. The catalytic activity for the HER stems from the reduced Rh species, and the inclusion of Cr3+ (CrOx) aided in the electron transfer process at the solid/liquid interface, resulting in a higher current density during the HER. To achieve a solar-to-hydrogen efficiency of over 3%, the conduction band minimum of the particulate photocatalyst should be positioned more negatively than -0.10 VRHE. Moreover, the formation of electron trap states at potentials more positive than 0.03 VRHE should be avoided. This study highlights the importance of understanding the catalytic sites on metal oxide cocatalysts. Moreover, it offers a design strategy for enhancing the efficiency of photocatalytic water splitting.

Systematic Constructing FeOCl/BiVO4 Hetero-Interfacial Hybrid Photoanodes for Efficient Photoelectrochemical Water Splitting.

Bismuth vanadate (BiVO4), as a promising photoanode for photoelectrochemical (PEC) water splitting, suffers from poor charge separation efficiency and light absorption efficiency. Herein, iron oxychloride (FeOCl) is introduced as a novel cocatalyst simply grafted on BiVO4 to construct an integrated photoanode, enhancing PEC performance. The optimized FeOCl/BiVO4 photoanode exhibits a superior photocurrent density value of 5.23 mA cm-2 at 1.23 V versus reversible hydrogen electrode (RHE) under AM 1.5G illuminations. From experimental analysis, such high PEC performance is ascribed to the unique properties of FeOCl, facilitating charge transport, increasing light absorption efficiency, and promoting water oxidation kinetics. Density functional theory calculations further confirm that FeOCl optimizes the Gibbs free energy of H and O-containing intermediates (OOH*) during PEC processes, boosting the catalytic kinetics of PEC water splitting. This work presents FeOCl as a promising catalyst for constructing high efficient PEC water-splitting photoanodes.

Ge-Doped Hematite with FeCoNi-Bi as Cocatalyst for High-Performing Photoelectrochemical Water Splitting.

Hematite is a promising photoanode material for photoelectrochemical water-splitting technology. However, the low current density associated with the low conductivity, low charge carrier mobility, and poor oxygen evolution catalytic activity is a challenging issue for the material. In this study, the challenge is addressed by introducing Germanium (Ge) doping, coupled with the use of FeCoNi-Bi as a co-catalyst. Ge doping not only increases the conductivity and charge carrier concentration of the hematite photoanode, but also induces nanopores, thereby expanding its electrochemical reactive surface area to facilitate the oxygen evolution reaction. In the meantime, the FeCoNi-Bi cocatalyst electrodeposited onto the surface of Ge-doped hematite, improves the oxygen evolution reaction performance. As a result, the obtained photoanode achieves a photocurrent density of 2.31 mA cm-2 at 1.23 VRHE, which is three times higher than that of hematite (0.72 mA cm-2). Moreover, a new analytical method is introduced to scrutinize both the positive and negative effects of Ge doping and FeCoNi-Bi cocatalyst on the photoanode performance by decoupling the photoelectrochemical process steps. Overall, this study not only enhances the performance of hematite photoanodes but also guides their rational design and systematic assessment.

Mechanistic insight into the synergy between platinum cluster and indium particle dual cocatalysts for enhanced photocatalytic water splitting.

Photocatalytic H2 production is envisioned as a promising pillar of sustainable energy conversion system to address the energy crisis and environmental issues but still challenging. Herein, a strategy is proposed to design a dual-metal cocatalysts consisting of Pt nanoclusters (Pt NCs) and In nanoparticles (In NPs) anchored on polymeric carbon nitride (Pt-In/CN) for boosting photocatalytic water splitting. As expected, the designed Pt-In/CN photocatalyst exhibits an impressive H2 production rate of 6.49 mmol·h-1·g-1 with an apparent quantum yield (AQY) of 33.56 % at 400 nm, which is 2.8- and 11.2-fold higher than those of the Pt/CN and In/CN, respectively. Combining experimental characterization with theoretical calculation demonstrates the synergistic mechanisms underpinning the enhanced photocatalytic activity. The Pt NCs and In NPs serve as photogenerated electron and hole trapping sites, respectively, which achieves the spatial separation of charge carriers and induces the polarized surface charge distribution, thus fostering optimal adsorption behavior of intermediates. More importantly, the p-block In NPs modulate the electronic microenvironment of Pt NCs to attenuate the adsorption behavior of H* intermediates for accelerated H2 evolution kinetics. This work unveils a versatile strategy to regulate the electronic structures of dual-metal sites with synergy by establishing charge transfer mechanism for dual-metal cocatalysts.

Carbon-coated nickel phosphide enhances efficiently electron transfer of cadmium sulfide for photocatalytic hydrogen production.

The capacitance of a co-catalyst can be likened to a "double-edged sword". Α co-catalysts with high capacitance can store photoexcited electrons, thereby facilitating charge separation within the host catalyst. However, this property simultaneously restricts electron release. Both effects are enhanced with an increasing capacitance value, implying that excessively high capacitance can significantly hinder the photocatalytic hydrogen (H2) production reaction. Herein, we have designed a metal-organic framework (MOF) -derived carbon-coated nickel phosphide (C-Ni5P4) as the co-catalyst of cadmium sulfide (CdS). When C-Ni5P4 and CdS are closely interconnected, electrons spontaneously migrate from CdS to C-Ni5P4 under irradiation due to the higher work function (WF) of C-Ni5P4 compared to CdS. Most importantly, although the WF of C-Ni5P4 is 0.1 eV lower than that of Ni5P4, its specific capacitance (1.2 mF/cm2) is also lower than that of Ni5P4 (1.3 mF/cm2). This difference dramatically promotes electron release. Thereby exerting a strong positive effect on capacitance catalysis. Therefore, 7% C-Ni5P4/CdS exhibits exceptional cyclic stability and has a remarkably high activity level of 12283 µmol/h/g and 3.8 times as many as 3.0 %Ni5P4/CdS. This study provides a theoretical basis for the advancement of photocatalysts with high efficiency in H2 production and is expected to be applied in other fields of photocatalysis.

Interfacial OOH* mediated Fe(II) regeneration on the single atom Co-N-C catalyst for efficient Fenton-like processes.

Fe(II) regeneration is decisive for highly efficient H2O2-based Fenton-like processes, but the role of cobalt-containing reactive sites in promoting Fe(II) regeneration was overlooked. Herein, a single atom Co-N-C catalyst was employed in Fe(II)/H2O2 system to promote the degradation of diverse organic contaminants. The EPR and quenching experiments indicated Co-N-C significantly enhanced the generation of superoxide species, and accelerated hydroxyl radical generation for pollutant degradation. The electrochemical and surface composition analyses demonstrated the enhanced H2O2 activation and Fe(III)/Fe(II) recycling on the catalyst. Furthermore, in-situ Raman characterization with shell-isolated gold nanoparticles was employed to visualize the interfacial reactive intermediates and their time-resolved interaction. The accumulation of interfacial CoOOH* was confirmed when Co-N-C activated H2O2 alone, but it rapidly transformed into FeOOH* upon Fe(II) addition. Besides, the temporal variation of OOH* intermediates and the relative intensity of Co(III)-O and Co(IV)=O peaks depicted the dynamic interaction of reactive intermediates along the H2O2 consumption. With this basis, we proposed a mechanism of interfacial OOH* mediated Fe(II) regeneration, which overcame the kinetical limitation of Fe(II)/H2O2 system. Therefore, this study provided a primary effort to elucidate the overlooked role of interfacial CoOOH* in the Fenton-like processes, which may inspire the design of more efficient catalysts.