Visibility of esophageal squamous cell carcinoma under iodine staining on texture and color enhancement imaging.

Objective: Iodine staining on white light imaging (WLI) is the gold standard for detecting and demarcating esophageal squamous cell carcinoma (ESCC). We examined the effects of texture and color enhancement imaging (TXI) on improving the endoscopic visibility of ESCC under iodine staining. Methods: Twenty ESCC lesions that underwent endoscopic submucosal dissection were retrospectively included. The color difference between ESCC and the surrounding mucosa (ΔEe) on WLI, TXI, and narrow-band imaging was assessed, and ΔEe under 1% iodine staining on WLI and TXI. Furthermore, the visibility grade determined by endoscopists was evaluated on each imaging. Result: The median ΔEe was greater on TXI than on WLI (14.53 vs. 10.71, respectively; p < 0.005). Moreover, the median ΔEe on TXI under iodine staining was greater than the median ΔEe on TXI and narrow-band imaging (39.20 vs. 14.53 vs. 16.42, respectively; p < 0.005 for both). A positive correlation in ΔEe under iodine staining was found between TXI and WLI (correlation coefficient = 0.61, p < 0.01). Moreover, ΔEe under iodine staining on TXI in each lesion was greater than the corresponding ΔEe on WLI. The visibility grade assessed by endoscopists on TXI was also significantly greater than that on WLI under iodine staining (p < 0.01). Conclusions: The visibility of ESCC after iodine staining was greater on TXI than on WLI.

A pH-responsive dual-emission composite for fast detection of BAs and visual monitoring seafood freshness with large luminescence color difference.

Sensing biogenic amine (BAs) content is very important for assessing food freshness. To address the limitations such as small color difference values (ΔE) and complex preparation of probes for visualizing the freshness of seafood, a pH-responsive ratiometric fluorescent probe (EnEB) was prepared by Eu(NO3)3, trimeric acid (BTC), and hydrochloric acid norepinephrine (Enr). EnEB emitted blue (446 nm) and red fluorescence (616 nm) originating from Enr and Eu3+, respectively, and exhibiting a fluorescence wavelength difference up to 170 nm. The ratiometric fluorescent signals of EnEB showed a linear correlation with pH in the range of 5.5-8.0. Thus, EnEB can rapidly and precisely detect BAs, such as histamine, tyramine, and spermine, with detection limits and response times of 1.14 µmol/L (3 s), 1.04 µmol/L (8 s), and 0.41 µmol/L (2 s), respectively. Furthermore, an EnEB aerogel was prepared by loading EnEB in a matrix formed by polyvinyl alcohol (PVA) and agarose (AG). EnEB aerogel exhibited excellent acid-base gas-sensing properties. The fluorescence color of EnEB aerogel can change significantly with the deterioration of seafood. When seafood changed from fresh to decayed, the ΔE value of EnEB aerogel was as high as 80.9. Importantly, the results of seafood freshness by naked eye using EnEB aerogel was consistent well with the TVB-N content and the freshness standard stipulated by national food standard, indicating EnEB aerogel can accurately visually and real-time monitor seafood freshness. Furthermore, the strategy for sensing food freshness based on EnEB aerogel also offered multiple color variations to indicate fine freshness levels of seafood. This work provided a convenient, efficient, and accurate approach to assessing the freshness of seafood. Additionally, EnEB also has promising applications in security and anti-counterfeiting.

Influence of preheating and water storage on the color, whiteness, and translucency of modern resin-based composites.

OBJECTIVES: To evaluate the influence of preheating and water storage on color, whiteness, and translucency of one-shaded, group-shaded, and multi-shaded resin-based composites. MATERIALS AND METHODS: A total of 270 samples were fabricated from one-shaded (Omnichroma), group-shaded (Optishade MD), and multi-shaded (Enamel Plus HRI) resin-based composites and divided into six groups: no heating (control) and 1-5 heatings (test) (n = 15). The CIE L*, a*, b*, C*, and h° color coordinates were registered over white, black, and gray backgrounds with a spectrophotometer before and after 24, 72, 144 h water storage. Kruskal-Wallis test was used to evaluate differences in the color coordinates, whiteness index, and translucency parameter (α = 0.05). The Mann-Whitney U test was performed with a Bonferroni correction (p < 0.001) for pairwise comparisons. CIEDE2000 color, whiteness, and translucency differences between groups and subgroups were evaluated using their respective 50%:50% perceptibility and acceptability thresholds. RESULTS: Preheating influenced color coordinates, whiteness index, and relative translucency parameters (p < 0.001). Although color differences were below the acceptability threshold for all materials, translucency differences were above the acceptability threshold for Omnichroma. Water storage significantly influenced the whiteness index of Optishade MD (p < 0.001). CONCLUSIONS: Preheating had a more considerable effect on the color, whiteness, and translucency of one-shaded resin-based composite, while water storage influenced group-shaded resin-based composite more importantly. CLINICAL SIGNIFICANCE: Preheating influences the color, whiteness level, and translucency of the resin-based composites, but the variations remain generally clinically acceptable; however, practitioners should be aware that the modifications in translucency for one-shaded resin-based composites could be more important than for group-shaded and multi-shaded resin-based composites.

Color detection of printing based on improved superpixel segmentation algorithm.

We propose an improved superpixel segmentation algorithm based on visual saliency and color entropy for online color detection in printed products. This method addresses the issues of low accuracy and slow speed in detecting color deviations in print quality control. The improved superpixel segmentation algorithm consists of three main steps: Firstly, simulating human visual perception to obtain visually salient regions of the image, thereby achieving region-based superpixel segmentation. Secondly, adaptively determining the superpixel size within the salient regions using color information entropy. Finally, the superpixel segmentation method is optimized using hue angle distance based on chromaticity, ultimately achieving a region-based adaptive superpixel segmentation algorithm. Color detection of printed products compares the color mean values of post-printing images under the same superpixel labels, outputting labels with color deviations to identify areas of color differences. The experimental results show that the improved superpixel algorithm introduces color phase distance with better segmentation accuracy, and combines it with human visual perception to better reproduce the color information of printed materials. Using the method described in this article for printing color quality inspection can reduce data computation, quickly detect and mark color difference areas, and provide the degree of color deviation.

Enhancing the Opacity of Glass Ceramics by Applying Opaque Stains to the Intaglio Surface.

OBJECTIVE: The aim of this study was to assess the effect of opaque stain application to the intaglio surface of lithium disilicate glass ceramics on the masking ability of discolored substrates and bond strength to a resin-based luting agent (depending on etching time); the stain film-thickness was also assessed. MATERIALS AND METHODS: Ceramic specimens were produced with CAD-CAM blocks of lithium disilicate (IPS e.max CAD). Two opaque stains were tested at ceramic intaglio surface: opaque glassy stain for titanium frameworks (OP-ti) and low-fusion glassy stain for ceramic characterization (LFG-iv). Non-stained ceramic specimens served as controls. For optical and colorimetric analyses, A2-shaded ceramics of medium and low-translucencies were tested, in thicknesses of 1.0- and 1.5-mm (n = 10), with two coupling agents (non-shaded-glycerin and A2-shaded try-in paste). CIEDE2000 formula was used for calculation of translucency parameter (TP00) and color differences (ΔE00). Whiteness index for dentistry (WID) was also reported. ΔE00 were assessed over discolored substrates (tooth-shaded A2-reference, A4, C3, and C4; coppery metal, silvery metal, white zirconia, and PEEK). Microshear bond strength of stained and non-stained ceramic specimens to a resin-based luting agent was evaluated. Film-thickness of stains was assessed by scanning electron microscopy. RESULTS: The application of opaque stains to the intaglio surface of lithium disilicate ceramics resulted in significant reduction of TP00 (p < 0.001) and WID (p < 0.001) and differences in L*, C*, and ho color coordinates (especially with OP-ti) (p < 0.001). ΔE00 was significantly reduced in stained ceramic groups in comparison with the control, for all discolored substrates (p < 0.001). Acceptable color matching was obtained with stained ceramic specimens for all discolored substrates, depending on the type of stain, ceramic thickness, ceramic translucency, and coupling agent. The application of stains to the ceramic intaglio surface was not detrimental to bond strength to a resin-based luting agent, but depended on the time of hydrofluoric acid-etching (20 s for OP-ti and 60 s for LFG-iv) (p < 0.001). Film-thickness of stains presented mean values <70 µm. CONCLUSION: The application of opaque stains to the intaglio surface of lithium disilicate glass ceramics was effective to mask severely discolored substrates, presenting adequate bond strength to the luting agent and thin film-thicknesses. CLINICAL SIGNIFICANCE: For indirect restorations over severely discolored substrates, the application of opaque stain to the intaglio surface of lithium disilicate glass ceramic ensures acceptable color matching, with adequate bond strength to resin-based luting agents and clinically acceptable stain film-thickness.

Bridging instrumental and visual perception with improved color difference equations: A multi-center study.

OBJECTIVES: This multicenter study aimed to evaluate visual-instrumental agreement of six color measurement devices and optimize three color difference equations using a dataset of visual color differences (∆V) from expert observers. METHODS: A total of 154 expert observers from 16 sites across 5 countries participated, providing visual scaling on 26 sample pairs of artificial teeth using magnitude estimation. Three color difference equations (ΔE*ab, ∆E00, and CAM16-UCS) were tested. Optimization of all three equations was performed using device-specific weights, and the standardized residual sum of squares (STRESS) index was used to evaluate visual-instrumental agreement. RESULTS: The ΔE*ab formula exhibited STRESS values from 18 to 40, with visual-instrumental agreement between 60 % and 82 %. The ∆E00 formula showed STRESS values from 26 to 32, representing visual-instrumental agreement of 68 % to 74 %. CAM16-UCS demonstrated STRESS values from 32 - 39, with visual-instrumental agreement between 61-68 %. Following optimization, STRESS values decreased for all three formulas, with ΔE' demonstrating average visual-instrumental agreement of 79 % and ∆E00 of 78 %. CAM16-UCS showed average visual-instrumental agreement of 76 % post optimization. SIGNIFICANCE: Optimization of color difference equations notably improved visual-instrumental agreement, overshadowing device performance. The optimzed ΔE' formula demonstrated the best overall performance combining computational simplicty with outstanding visual-instrumental agreement.

Effect of artificial aging on optical properties of ultra-translucent zirconia ceramics of different brands.

OBJECTIVES: This work aimed to evaluate the effect of artificial aging on the translucency and color difference (ΔE) of ultra-translucent zirconia and provide a reference for clinical application. METHODS: The discs of ultra-translucent zirconia from six brands (Wieland, 3M ESPE, Amann Girrbach, Kuraray Noritake, Upcera, and Besmile) were cut and sintered according to each manufacturer's product instructions; the experimental groups were named ZNT, LVP, AG, KAT, UPC, and BSM, respectively. IPS e.max Press was used as the control group (PLT). The specimens (n=6) were prepared with a diameter of 14 mm and a thickness of 1 mm. The specimens were subjected to artificial aging treatment according to the following conditions: in an autoclave at 134 ℃ at 0.2 MPa for 4, 8, and 12 h. According to the CIE1976Lab system, the CIE L*, a*, and b* values of the specimens before and after aging were measured by a co-lorimeter. The translucency parameter (TP) and ΔE were calculated. RESULTS: The mean TP values of each group before aging inorder were PLT>KAT>AG>ZNT>BSM>UPC>LVP. We found no significant difference in translucency in all experimental groups after aging for 4 and 8 h compared with those before aging. After 12 h of aging, the TP values of the KAT and ZNT groups were not significantly different from those before aging, but the TP values of the AG, BSM, LVP, and UPC groups were significantly lower than those before aging (P<0.05). The TP value of the control group was significantly higher than that of the other experimental groups at different stages (P<0.05). ΔE=3.3 was considered the visible color difference, and ΔE was less than 3.3 in all groups after 4 h of aging. After aging for 8 h, ΔE of the UPC group was slightly higher than 3.3. ΔE of the BSM and UPC groups was greater than 3.3 after 12 h of aging. CONCLUSIONS: The TP and ΔE of different brands of ultra-translucent zirconia may change after various aging times. The translucency of some zirconia showed a decreasing trend and the color difference showed an increasing trend with the aging time.

Colorimetric Evaluation of a Reintegration via Spectral Imaging-Case Study: Nasrid Tiling Panel from the Alhambra of Granada (Spain).

Color reintegration is a restoration treatment that involves applying paint or colored plaster to an object of cultural heritage to facilitate its perception and understanding. This study examines the impact of lighting on the visual appearance of one such restored piece: a tiled skirting panel from the Nasrid period (1238-1492), permanently on display at the Museum of the Alhambra (Spain). Spectral images in the range of 380-1080 nm were obtained using a hyperspectral image scanner. CIELAB and CIEDE2000 color coordinates at each pixel were computed assuming the CIE 1931 standard colorimetric observer and considering ten relevant illuminants proposed by the International Commission on Illumination (CIE): D65 plus nine white LEDs. Four main hues (blue, green, yellow, and black) can be distinguished in the original and reintegrated areas. For each hue, mean color difference from the mean (MCDM), CIEDE2000 average distances, volumes, and overlapping volumes were computed in the CIELAB space by comparing the original and the reintegrated zones. The study reveals noticeable average color differences between the original and reintegrated areas within tiles: 6.0 and 4.7 CIEDE2000 units for the yellow and blue tiles (with MCDM values of 3.7 and 4.5 and 5.8 and 7.2, respectively), and 16.6 and 17.8 CIEDE2000 units for the black and green tiles (with MCDM values of 13.2 and 12.2 and 10.9 and 11.3, respectively). The overlapping volume of CIELAB clouds of points corresponding to the original and reintegrated areas ranges from 35% to 50%, indicating that these areas would be perceived as different by observers with normal color vision for all four tiles. However, average color differences between the original and reintegrated areas changed with the tested illuminants by less than 2.6 CIEDE2000 units. Our current methodology provides useful quantitative results for evaluation of the color appearance of a reintegrated area under different light sources, helping curators and museum professionals to choose optimal lighting.

Machine learning models to predict submucosal invasion in early gastric cancer based on endoscopy features and standardized color metrics.

Conventional endoscopy is widely used in the diagnosis of early gastric cancers (EGCs), but the graphical features were loosely defined and dependent on endoscopists' experience. We aim to establish a more accurate predictive model for infiltration depth of early gastric cancer including a standardized colorimetric system, which demonstrates promising clinical implication. A retrospective study of 718 EGC cases was performed. Clinical and pathological characteristics were included, and Commission Internationale de l'Eclariage (CIE) standard colorimetric system was used to evaluate the chromaticity of lesions. The predicting models were established in the derivation set using multivariate backward stepwise logistic regression, decision tree model, and random forest model. Logistic regression shows location, macroscopic type, length, marked margin elevation, WLI color difference and histological type are factors significantly independently associated with infiltration depth. In the decision tree model, margin elevation, lesion located in the lower 1/3 part, WLI a*color value, b*color value, and abnormal thickness in enhanced CT were selected, which achieved an AUROC of 0.810. A random forest model was established presenting the importance of each feature with an accuracy of 0.80, and an AUROC of 0.844. Quantified color metrics can improve the diagnostic precision in the invasion depth of EGC. We have developed a nomogram model using logistic regression and machine learning algorithms were also explored, which turned out to be helpful in decision-making progress.

In Vitro Comparison of Optical Properties Between Single-Shade and Conventional Composite Resin Restorations.

INTRODUCTION: The recently developed single-shade composite resin (using the concept of structural coloring) is a promising option to eliminate the process and subjectivity of shade selection. However, current evidence of its performance is still insufficient. This study aimed to evaluate the color matching, color stability, and refractive index (RI) of single-shade restorations compared with conventional composite resin. METHODS: This in vitro study was conducted on 48 extracted maxillary premolars. The teeth were sorted into three tooth shade groups (B2, A3, and A3.5). Each group included two subgroups based on the materials used: Omnichroma (OM; Tokuyama Dental, Tokyo, Japan) and Filtek Z350 (FT; 3M ESPE, St. Paul, MN, USA). Buccal and lingual Class V round cavities were prepared and restored according to the randomly assigned subgroups, with the test single-shade material (OM) on one surface and the matching conventional control material (FT) of the proper shade on the other surface of each tooth. Color matching was evaluated by visual assessment and a spectrophotometer. All specimens were distributed into four staining groups and immersed in various staining beverages (black coffee, Arabic coffee, Coca-Cola, and distilled water) for four weeks. Color changes were assessed using a spectrophotometer. Four groups of disc-shaped specimens (single-shade, B2, A3, and A3.5) were fabricated to evaluate the RI using a refractometer. Statistical analyses were performed to compare the materials. RESULTS: The mean value of the color difference (ΔE) of single-shade restorations was significantly higher than that of paired conventional restorations in all shade groups. The highest mean ΔE was in subgroup A3.5-OM (8.84 ± 2.39) and showed significantly less color matching than other OM subgroups (p=0.009). The visual assessment showed comparable and acceptable color matching in all subgroups except A3.5-OM (p=0.006). There was a significant color change after the staining test within and across staining groups, but the color change was comparable between the OM and FT subgroups. The RI of single-shade material was significantly higher than conventional material (p<0.05). CONCLUSION: The color matching of single-shade restorations was affected by tooth shade. Its color stability was influenced by various staining substances but was similar to conventional restorations.

Is a White Diet Necessary for Tooth Bleaching Procedures? A Systematic Review and Meta-Analysis.

The aim of this investigation was to conduct a systematic review and meta-analysis to determine the necessity of a white diet during or following a bleaching procedure. This systematic review and meta-analysis followed the PRISMA guidelines meticulously. The research question was: Is a white diet necessary during and/or after a bleaching treatment? In vitro studies or clinical trials reporting the color change in bleached enamel after the use of a free-staining diet were considered for full-text review. For the analyses, a random-effects model was employed. Statistical significance was defined as a p-value < 0.05. A total of 17 documents were eligible for qualitative analysis: 5 clinical trials and 12 in vitro studies. Only data from the clinical trials were included in the meta-analysis. For at-home bleaching, differences in the color among the subjects were not statistically significant during the first (p = 0.64), second (p = 0.26) or third (p = 0.43) weeks of treatment. Also, the color difference one month after finishing the bleaching treatment were not statistically significant (p = 0.27). The color difference one month after finishing an in-office treatment showed that the restrictions on diet did not significantly improve the bleaching outcomes (p = 0.90). According to the findings of this review, dietary restrictions are not necessary during or after bleaching procedures.

Effect of ceramic type and thickness on the masking ability of chairside machinable all-ceramic crowns.

OBJECTIVES: This study aimed to evaluate the influence of ceramic type and thickness on the masking ability and final aesthetic effects of chairside machinable all-ceramic crowns. METHODS: Six kinds from three types chairside machinable ceramic materials (IPS e.max CAD HT/MT/LT, IPS Empress LT, and VITA Suprinity HT/T) in shade A2 were fabricated to slice specimens into 1.0, 1.5, and 2.0 mm-thick sections (n=10). The color parameters of the specimens against black and white tiles and four resin substrates (A2, A4, B3, and C4 shade) were measured with a spectrophotometer. The translucency parameter (TP) was calculated using color parameters measured over standard white and black backgrounds. The color differences (ΔE) were calculated between there substrate shades (A4, B3, C4 ) and A2 shade (control group). Two-way analysis of variance (ANOVA) was performed on the TP values. The two va-riables were ceramic type and ceramic thickness. Three-way ANOVA was used to determine the effects of ceramic materials, ceramic thickness, and substrate shades on the ΔE values, followed by Tukey test for multiple comparisons (α=0.05). RESULTS: Ceramic type, ceramic thickness, and substrate shade significantly affected the ΔE values (P<0.001). The L* and b* values of the specimens increased with increasing ceramic thickness, except in substrate A2, whereas the ΔE values decreased. The color difference of all 1.0 mm-thick specimens or all specimens over the substrates C4 shade exceeded the clinically acceptable threshold (ΔE>3.3). CONCLUSIONS: The masking ability of chairside machinable all-ceramic crowns is influenced by ceramic type and thickness, and ceramic material. The thickness of ceramic less than 2.0 mm cannot mask the gray shade abutment.

L-Menthol for Color Difference Change Between Early Gastric Cancer and Surrounding Mucosa: A Prospective Study.

BACKGROUND: L-Menthol sprayed on early gastric cancer (EGC) has been reported to improve the visibility of the lesion. However, its impact when used in combination with novel image-enhanced endoscopy has not been investigated. AIM: This study aimed to evaluate the visual effect of spraying L-menthol on EGC under linked color imaging (LCI). METHODS: This open-label, single-arm, prospective study investigated the color difference between EGC and the surrounding mucosa (ΔEG) before and after spraying L-menthol. The primary endpoint was the percentage of lesions with ΔEG ≥ 5 on LCI. The percentage of lesions with ΔEG ≥ 5 on white light imaging (WLI) and blue laser imaging (BLI), ΔEG before and after spraying L-menthol, and percentage of lesions with increased ΔEG after spraying L-menthol constituted the secondary endpoints. RESULTS: Sixty patients were included in the final analysis. 100% lesions had ΔEG ≥ 5, both before and after spraying L-menthol on LCI, with similar results observed in WLI as well as BLI. The median ΔEG on LCI, WLI, and BLI increased after spraying L-menthol (LCI: 16.9 vs. 21.5, p < 0.01; WLI: 10.4 vs. 13.4, p < 0.01; BLI; 12.1 vs. 15.7, before and after, respectively, p < 0.01); and LCI demonstrated the highest percentage of lesions with increased ΔEG (LCI, WLI, and BLI: 98.3%, 81.7%, and 76.7%, respectively, p < 0.01). CONCLUSION: Although spraying L-menthol did not improve the visibility of EGC under LCI observation, a significant increase in ΔEG was observed in LCI (jRCTs 021200027).

Chromophores' Contribution to Color Changes of Thermally Modified Tropical Wood Species.

This work examines the effect of thermal modification temperature (180, 200, and 220 °C) in comparison with reference (untreated) samples on selected optical properties of six tropical wood species-Sp. cedar (Cedrala odorata), iroko (Chlorophora excelsa), merbau (Intsia spp.), meranti (Shorea spp.), padouk (Pterocarpus soyauxii), and teak (Tectona grandis). The main goal is to expand the existing knowledge in the field of wood thermal modification by understanding the related degradation mechanisms associated with the formation of chromophoric structures and, above all, to focus on the change in the content of extractive substances. For solid wood, the CIELAB color space parameters (L*, a*, b*, and ΔE*), yellowness (Y), ISO brightness, and UV-Vis diffuse reflectance spectra were obtained. Subsequently, these wood samples were extracted into three individual solvents (acetone, ethanol, and ethanol-toluene). The yields of the extracted compounds, their absorption spectra, and again L*, a*, b*, ΔE*, and Yi parameters were determined. With increasing temperatures, the samples lose brightness and darken, while their total color difference grows (except merbau). The highest yield of extractives (mainly phenolic compounds, glycosides, and dyes) from thermally modified samples was usually obtained using ethanol. New types of extractives (e.g., 2-furaldehyde, lactones, formic acid, some monomer derivatives of phenols, etc.) are already created around a temperature of 180 °C and may undergo condensation reactions at higher temperatures. For padouk, merbau, teak, and partially iroko modified at temperatures of 200 and 220 °C, there was a detected similarity in the intensities of their UV-Vis DR spectra at the wavelength regions corresponding to phenolic aldehydes, unsaturated ketones, quinones, stilbenes, and other conjugated carbonyl structures. Overall, a statistical assessment using PCA sorted the samples into five clusters. Cluster 3 consists of almost all samples modified at 200 and 220 °C, and in the other four, the reference and thermally modified samples at 180 °C were distributed. The yellowness of wood (Y) has a very high dependence (r = 0.972) on its brightness (L*) and the yellowness index of the extractives in acetone Yi(Ac), whose relationship was described by the equation Y = -0.0951 × Y(Ac) + 23.3485.

Influence of Pasteurization on Maillard Reaction in Lactose-Free Milk.

In order to improve the safety and quality of lactose-free milk (LFM) Maillard reaction products (MRPs), this study used raw cow's milk as raw material and lactase hydrolysis to prepare LFM, which was heat-treated using pasteurization and then placed in storage temperatures of 4 °C, 25 °C and 37 °C to investigate the changes in the Maillard reaction (MR). The results of the orthogonal test showed that the optimal conditions for the hydrolysis of LFM are as follows: the hydrolysis temperature was 38 °C, the addition of lactase was 0.03%, and the hydrolysis time was 2.5 h. Under these conditions, the lactose hydrolysis rate reached 97.08%, and the lactose residue was only 0.15 g/100 g as determined by high-performance liquid chromatography (HPLC), complying with the standard of LFM in GB 28050-2011. The contents of furoamic acid and 5-hydroxymethylfurfural were determined by high-performance liquid chromatography, the color difference was determined by CR-400 color difference meter, and the internal fluorescence spectrum was determined by F-320 fluorescence spectrophotometer. The test results showed that the variation range of furosine in lactose-free milk after pasteurization was 44.56~136.45 mg/100g protein, the range of 5-hydroxymethylfurfural (HMF) was 12.51~16.83 mg/kg, the color difference ranges from 88.11 to 102.53 in L*, from -0.83 to -0.10 in a*, and from 1.88 to 5.47 in b*. The furosine content of LFM during storage at 4, 25, and 37 °C ranged from 44.56 to 167.85, 44.56 to 287.13, and 44.56 to 283.72 mg/100 g protein, respectively. The average daily increase in protein content was 1.18-3.93, 6.46-18.73, and 15.7-37.66 mg/100 g, respectively. The variation range of HMF was 12.51~17.61, 12.51~23.38, and 12.51~21.1 mg/kg, and the average daily increase content was 0.03~0.07, 0.47~0.68, and 0.51~0.97 mg/kg, respectively. During storage at 4 °C, the color difference of LFM ranged from 86.82 to 103.82, a* ranged from -1.17 to -0.04, and b* ranged from 1.47 to 5.70. At 25 °C, color difference L* ranges from 72.09 to 102.35, a* ranges from -1.60 to -0.03, b* ranges from 1.27 to 6.13, and at 37 °C, color difference L* ranges from 58.84 to 102.35, a* ranges from -2.65 to 1.66, and b* ranges from 0.54 to 5.99. The maximum fluorescence intensity (FI) of LFM varies from 131.13 to 173.97, 59.46 to 173.97, and 29.83 to 173.97 at 4, 25, and 37 °C. In order to reduce the effect of the Maillard reaction on LFM, it is recommended to pasteurize it at 70 °C-15 s and drink it as soon as possible during the shelf life within 4 °C.

Effects of basil seed and guar gums coatings on sensory attributes and quality of dehydrated orange slices using osmotic-ultrasound method.

In this work, the effects of gum coating (basil seed and guar gums), ultrasonic power, sonication time, and sucrose concentration on the osmosis dehydration parameters (water loss, solid gain, and rehydration rate), sensory attributes, color changes, and surface shrinkage of dehydrated orange slices using osmotic-ultrasound method were studied. The moisture loss and sucrose gain increased when the ultrasonic duration and sucrose level increased. The edible coating reduced solids absorption, with the lowest sucrose absorption in the basil seed gum-coated slices. Also, the coating increased rehydration rate of dried orange slices, with the highest rehydration ratio in the basil seed gum-coated slices (225.91 %). Edible coating with basil seeds gum improved the sensorial attributes of dried orange slices. The total color difference (ΔE) and surface shrinkage of osmotic dehydrated, dried, and rehydrated orange slices decreased with edible coating pretreatment and increasing in the sonication intensity. As the ultrasound duration enhanced from 5 to 15 min, the average surface shrinkage values of dried and rehydrated orange slices increased from 22.74 % to 26.36 %, and 12.18 % to 15.50 %, respectively. The current work confirmed that the gum coating has the potential to enhance appearance quality and sensorial attributes of osmotic-ultrasound dehydrated orange slices.

Color difference for shade determination with visual and instrumental methods: a systematic review and meta-analysis.

BACKGROUND: Shade determination is a critical step for the fabrication of a satisfactory restoration. Visual shade selection with conventional shade guides is subjective and influenced by variables related to light, observer, and object. Shade selection devices have been introduced to provide subjective and quantitative shade values. This systematic review and meta-analysis aimed to compare the color difference for shade selection with visual and instrumental methods. METHODS: An initial search was conducted on databases (MEDLINE via PubMed, Scopus, and Web of Science) in addition to a manual search through references of identified articles. Studies comparing the accuracy of visual and instrumental shade selection based on ΔΕ were included in data synthesis. Mean differences (MDs) and 95% confidence intervals (CIs) were calculated to estimate the effect size for global and subgroup meta-analysis using the inverse variance weighted method and random-effects model (P ˂ 0.05). Results were presented as forest plots. RESULTS: The authors identified 1776 articles from the initial search. Seven in vivo studies were included in the qualitative analysis of which six studies were included in the meta-analysis. For the global meta-analysis, the pooled mean (95% CI) was - 1.10 (- 1.92, - 0.27). Test for overall effect showed that instrumental methods were significantly more accurate than visual methods with significantly less ΔΕ (P = 0.009). Test for subgroup difference showed that the type of instrumental shade selection method used had a significant effect on accuracy (P ˂ 0.001). Instrumental methods including spectrophotometer, digital camera, and smartphone showed significantly better accuracy compared with visual shade selection (P ˂ 0.05). The greatest mean difference was found between the smartphone and visual method with a mean (95% CI) of - 2.98 (- 3.37, - 2.59) with P ˂ 0.001 followed by digital camera and spectrophotometer. There was no significant difference in accuracy between IOS and visual shade selection (P = 1.00). CONCLUSIONS: Instrumental shade selection with a spectrophotometer, digital camera, and smartphone showed significantly better shade matching compared with a conventional shade guide, whereas IOS did not improve the shade matching significantly compared with shade guides. REVIEW REGISTRATION: PROSPERO CRD42022356545.

Effect of thickness, translucency, and substrates on the masking ability of a polymer-infiltrated ceramic-network material.

OBJECTIVE: The aim of this in vitro study is to evaluate the masking ability of polymer-infiltrated ceramic-network materials (PICN) with different translucencies and thicknesses on multiple types of substrates. MATERIALS AND METHODS: Ceramic samples were prepared of VITA ENAMIC blocks in two different translucencies (2M2-T, 2M2-HT) in a thickness range of 0.5-2.5 mm (±0.05 mm). Layered specimens were obtained using composite substrates in nine shades and transparent try-in paste. Spectral reflectance of specimens was measured using a Konica Minolta CM-3720d spectrophotometer and D65 standard illumination. CIEDE2000 color difference (ΔE00 ) between two samples was evaluated using 50%:50% perceptibility and acceptability thresholds. Specular component of the reflection was examined with Specular Component Excluded (SCE) and Included (SCI) settings. Statistical evaluation was performed by linear regression analysis, Kruskal-Wallis test, and multiplicative effect analysis. RESULTS: An increase in thickness of 0.5 mm reduces ΔE00 of HT samples to 73.5%, of T samples to 60.5% (p < 0.0001). Five substrates with HT specimens, and three substrates with T specimens had significantly different results from average (p < 0.05). There is a significant difference between SCE and SCI data depending on the wavelength (p < 0.0001). CONCLUSIONS: Masking ability of PICN materials is influenced by the thickness and translucency of the ceramic, and by the substrate. Reflection of the examined PICN material is characterized by both diffuse and specular reflection. CLINICAL SIGNIFICANCE: Although PICN materials have been available on the market for 10 years now, there is a lack of information regarding their masking ability. Acquiring in-depth data and thereby practical experience of the factors affecting the esthetics of PICN materials is essential for creating perfectly lifelike restorations.

Color and Translucency Variation of a One-Shaded Resin-Based Composite after Repeated Heating Cycles and Staining.

(1) Background: This study aimed to determine the effect of repeated pre-polymerization heating on the color and translucency of a one-shaded resin-based composite and to evaluate whether the heating cycles affect its color stability. (2) Methods: Fifty-six samples of 1-mm thickness were fabricated from Omnichroma (OM) after applying different heating cycles (for one, five, and ten times at 45 °C) before polymerization (n = 14/group) and afterwards were stained with a yellow dye solution. CIE L*, a*, b*, C*, h° coordinates were recorded, and color differences, whiteness, and translucency were calculated, before and after staining. (3) Results: Heating cycles significantly influenced the color coordinates, WID00, and TP00 of OM being higher after one heating cycle and decreasing as the number of heating cycles increased. The color coordinates, WID, and TP00 after staining significantly differed for each group. The color and whiteness differences calculated after staining exceeded the acceptability thresholds for all groups. The color and whiteness variations after staining were clinically unacceptable. (4) Conclusions: Repeated pre-polymerization heating induces a clinically acceptable color and translucency change to OM. Although the color changes resulting after staining are clinically unacceptable, increasing the number of heating cycles up to ten times slightly reduces the color differences.

Resin composite layering on discolored substrates ensures masking ability for monolithic ceramics.

OBJECTIVE: the aim of this study was to evaluate the effect of resin composite layering on discolored substrates to obtain masking ability with monolithic ceramics. MATERIALS AND METHODS: Four groups (n = 8) of computer-aided design/computer aided manufacturing (CAD/CAM) monolithic ceramics, shade A1, with thicknesses of 1.0 and 1.5 mm, were tested: feldspathic (FC), leucite-reinforced (LC), lithium disilicate-reinforced (LD), and translucent zirconia (5YSZ). Five substrates were used: A1 (used as reference), A3.5, C4, and coppery and silvery metals. The substrates were separated as non-layered or layered (with flowable opaque resin composite (FL), white opaque restorative resin composite (WD), and A1-shaded opaque restorative resin composite (A1D)). Resin composite layers of 0.5 and 1.0 mm were tested. The try-in paste, shade A1, was used as a luting agent. Translucency parameter (TP00 ) was assessed for the ceramics. Color differences (∆E00 ) were assessed for the restorative ceramics and resin composite layers over discolored substrates with the CIEDE2000 formula. The results were compared statistically, and descriptively with acceptability (AT, 1.77) and perceptibility (PT, 0.81) thresholds. RESULTS: Feldspathic showed the highest TP00 (for both ceramic thicknesses) and LD the lowest (for 1.5 mm of ceramic thickness) (P < 0.001). For substrate A3.5, layering with 1.0 mm of A1D or WD ensured ∆E00 below PT for all ceramics tested (P < 0.001). The use of 0.5 mm of FL or 1.0 mm of A1D associated with ceramics LC, LD, and 5YSZ ensured ∆E00 below AT for substrates C4 and coppery metal (P < 0.001). Silvery background layered with 0.5 mm of FL presented ∆E00 below AT for all ceramics and ∆E00 below PT for lithium disilicate of 1.0 mm of thickness (∆E00 = 0.72). CONCLUSIONS: Layering severely discolored substrates with selected opaque resin composites ensures masking ability for restoration with CAD/CAM monolithic ceramics. CLINICAL SIGNIFICANCE: Severely discolored substrates are predictably restored with monolithic CAD/CAM ceramics by performing a previous layering of the substrate with opaque resin composite.