Tremendously enhanced catalytic performance of Fe(III)/peroxymonosulfate process by trace Cu(II): A high-valent metals domination in organics removal.

Dissolved copper and iron ions are regarded as friendly and economic catalysts for peroxymonosulfate (PMS) activation, however, neither Cu(II) nor Fe(III) shows efficient catalytic performance because of the slow rates of Cu(II)/Cu(I) and Fe(III)/Fe(II) cycles. Innovatively, we observed a significant enhancement on the degradation of organic contaminants when Cu(II) and Fe(III) were coupled to activate PMS in borate (BA) buffer. The degradation efficiency of Rhodamine B (RhB, 20 µmol/L) reached up to 96.3% within 10 min, which was higher than the sum of individual Cu(II)- and Fe(III)- activated PMS process. Sulfate radical, hydroxyl radical and high-valent metal ions (i.e., Cu(III) and Fe(IV)) were identified as the working reactive species for RhB removal in Cu(II)/Fe(III)/PMS/BA system, while the last played a predominated role. The presence of BA dramatically facilitated the reduction of Cu(II) to Cu(I) via chelating with Cu(II) followed by Fe(III) reduction by Cu(I), resulting in enhanced PMS activation by Cu(I) and Fe(II) as well as accelerated generation of reactive species. Additionally, the strong buffering capacity of BA to stabilize the solution pH was satisfying for the pollutants degradation since a slightly alkaline environment favored the PMS activation by coupling Cu(II) and Fe(III). In a word, this work provides a brand-new insight into the outstanding PMS activation by homogeneous bimetals and an expanded application of iron-based advanced oxidation processes in alkaline conditions.

Using transglutaminase to cross-link complexes of lactoferrin and α-lactalbumin to increase thermal stability.

The poor thermal stability of lactoferrin (LF) hinders its bioavailability and use in commercial food products. To preserve LF from thermal denaturation, complexation with other biopolymers has been studied. Here we present the complex formation conditions, structural stability, and functional protection of LF by α-lactalbumin (α-LA). The formation of the LF-α-LA complexes was dependent on pH, mass ratio, and ionic strength. Changing the formation conditions and cross-linking by transglutaminase impacted the turbidity, particle size, and zeta-potential of the resulting complexes. Electrophoresis, Fourier-transform infrared spectroscopy, and circular dichroism measurements suggest that the secondary structure of LF in the LF-α-LA complex was maintained after complexation and subsequent thermal treatments. At pH 7, the LF-α-LA complex protected LF from thermal aggregation and denaturation, and the LF retained its functional and structural properties, including antibacterial capacity of LF after thermal treatments. The improved thermal stability and functional properties of LF in the LF-α-LA complex are of interest to the food industry.

Unraveling Anomalies in Preferential Liquid Transport through the Intrinsic Pores of Cyclodextrin in Polyester Nanofilms.

The precise manipulation of the porous structure of the nanofiltration membrane is critical for unlocking enhanced separation efficiencies across various liquids and solutes. Ultrathin films of crosslinked macrocycles, specifically cyclodextrins (CDs), have drawn considerable attention in this area owing to their ability to facilitate precise molecular separation with high liquid permeance for both polar and non-polar liquids, resembling Janus membranes. However, the functional role of the intrinsic cavity of CD in liquid transport remains inadequately understood, demanding immediate attention in designing nanofiltration membranes. Here, the synthesis of polyester nanofilms derived from crosslinked ß-CD, demonstrating remarkable Na2SO4 rejection (≈92 - 99.5%), high water permeance (≈4.4 - 37.4 Lm-2h-1bar-1), extremely low hexane permeance (<1 Lm-2h-1bar-1), and extremely high ratio (α > 500) of permeances for polar and non-polar liquids, is reported. Molecular simulations support the findings, indicating that neither the polar nor the non-polar liquids flow through the ß-CD cavity in the nanofilm. Instead, liquid transport predominantly occurs through the 2.2 nm hydrophilic aggregate pores. This challenges the presumed functional role of macrocyclic cavities in liquid transport and raises questions about the existence of the Janus structure in nanofiltration membranes produced from the macrocyclic monomers.

Adsorption mechanism and remediation of heavy metals from soil amended with hyperthermophilic composting products: Exploration of waste utilization.

Due to high humification, hyperthermophilic composting products (HP) show potential for remediating heavy metal pollution. However, the interaction between HP and heavy metals remains unclear. This study investigated the adsorption mechanism and soil remediation effect of HP on heavy metals. The results showed that the maximum adsorption capacity of HP increased by an average of 30.74 % compared to conventional composting products. HP transformed 34.87 % of copper, 42.55 % of zinc, and 35.63 % of lead from exchangeable and reducible forms into residual and oxidizable forms, thus reducing the soil risk level. In conclusion, HP significantly enhanced the adsorption of heavy metals and their transformation from unstable to stable forms, primarily due to the higher content of hydroxyl and carboxyl groups. This study aims to demonstrate the effectiveness of HP for remediating heavy metal pollution and to enhance the understanding of the underlying mechanism, which lays a foundation for waste utilization.

Binding between Cu2+/Zn2+ and aged polyethylene and polyethylene terephthalate microplastics in swine wastewaters: Adsorption behavior, and mechanism insights.

Microplastics (MPs) have aroused growing environmental concerns due to their biotoxicity and vital roles in accelerating the spread of toxic elements. Illuminating the interactions between MPs and heavy metals (HMs) is crucial for understanding the transport and fate of HM-loaded MPs in specific environmentally relevant scenarios. Herein, the adsorption of copper (Cu2+) and zinc (Zn2+) ions over polyethylene (PE) and polyethylene terephthalate (PET) particulates before and after heat persulfate oxidation (HPO) treatment was comprehensively evaluated in simulated and real swine wastewaters. The effects of intrinsic properties (i.e., degree of weathering, size, type) of MPs and environmental factors (i.e., pH, ionic strength, and co-occurring species) on adsorption were investigated thoroughly. It was observed that HPO treatment expedites the fragmentation of pristine MPs, and renders MPs with a variety of oxygen-rich functional groups, which are likely to act as new active sites for binding both HMs. The adsorption of both HMs is pH- and ionic strength-dependent at a pH of 4-6. Co-occurring species such as humic acid (HA) and tetracycline (TC) appear to enhance the affinity of both aged MPs for Cu2+ and Zn2+ ions via bridging complexation. However, co-occurring nutrient species (e.g., phosphate and ammonia) demonstrate different impacts on the adsorption, improving uptake of Cu2+ by precipitation while lowering affinity for Zn2+ owing to the formation of soluble zinc-ammonia complex. Spectroscopic analysis indicates that the dominant adsorption mechanism mainly involves electrostatic interactions and surface complexation. These findings provided fundamental insights into the interactions between aged MPs and HMs in swine wastewaters and might be extended to other nutrient-rich wastewaters.

N-Halosuccinimide-CeCl3 Transient Charge-Transfer Complexes as Semi Heterogeneous Photocatalyst in Cyclization of N-Propargylamides.

In this work, we used photoinert anhydrous cerium(III) chloride, to form a transient charge-transfer (CT) complex with NXS (N-bromosuccinimide or NBS and N-iodosuccinimide or NIS) in acetonitrile. These transient CT complexes acted as a semi-heterogeneous photocatalyst. These complexes allowed the Ce(III) ions to absorb light, turning them into strong electron donors that transferred electrons to NXS. This created halide radicals from NXS radical anions, helping to turn N-propargylamides into oxazole aldehydes. Experiments with DMPO and spin-trapping showed that a radical-based mechanism followed a single electron transfer (SET) pathway. Notably, CeCl3 was reused after the reaction without much decomposition, as it was regenerated and separated through simple filtration.

Generic phosphate affinity constants of the CD-MUSIC-eSGC model to predict phosphate adsorption and dominant speciation on iron (hydr)oxides.

Estimating the availability of phosphorus in soils and sediments is complicated by the diverse mineralogical properties of iron (hydr)oxides that control the environmental fate of phosphorus. Despite various surface complexation models have been developed, lack of generic phosphate affinity constants (logKPO4s) for iron (hydr)oxides hinders the prediction of phosphate adsorption to iron (hydr)oxides in nature. The aim of this work is to derive generic logKPO4s for the Charge Distribution-Multisite Complexation extended-Stern-Gouy-Chapman (CD-MUSIC-eSGC) model using a large phosphate adsorption database and previously derived generic protonation parameters. The optimized logKPO4s of goethite, hematite and ferrihydrite are located in a much narrower range than those in the RES3T database. Specifically, the logKPO4 ranges of FeOPO3, FeOPO2OH, FeOPO(OH)2, (FeO)2PO2, and (FeO)2POOH complexes were 17.40-18.00, 24.20-27.40, 27.90-29.80, 26.50-29.60, and 30.70-33.40, respectively. A simplified CD-MUSIC-eSGC model with species FeOPO2OH and (FeO)2PO2 and generic logKPO4 values 26.0 ± 0.9 and 27.9 ± 0.8, respectively, provides an accurate prediction of phosphate adsorption and dominant speciation to the iron (hydr)oxides at environmental pH and phosphate levels. For ferrihydrite at low pH and high phosphate levels the species FeOPO(OH)2 and (FeO)2POOH cannot be neglected. The simplified model expands the application boundaries of CD-MUSIC-eSGC model in predicting the phosphate adsorption on natural iron (hydr)oxides without laborious characterization.

Influence of Diluent on Extraction Parameters of Systems for Separation Am(III) and Ln(III) Based on 1,10-Phenanthroline-2,9-Diamide.

A systematic study of extraction systems for the separation of f-elements using the tetradentate N,O-donor diamide of 1,10-phenanthroline-2,9-dicarboxylic acid (L) in various molecular and ionic solvents was performed. It was demonstrated that the nature of a diluent has a significant impact on solvent extraction of Am(III) and Ln(III) and the stoichiometry of formed complexes with f-elements. The mechanism of complexation and forms of complexes in different diluents were investigated by radiometric methods, UV-vis titration, and XRD.

Copper(II) and Zinc(II) Complexes with Bacterial Prodigiosin Are Targeting Site III of Bovine Serum Albumin and Acting as DNA Minor Groove Binders.

The negative environmental and social impacts of food waste accumulation can be mitigated by utilizing bio-refineries' approach where food waste is revalorized into high-value products, such as prodigiosin (PG), using microbial bioprocesses. The diverse biological activities of PG position it as a promising compound, but its high production cost and promiscuous bioactivity hinder its wide application. Metal ions can modulate the electronic properties of organic molecules, leading to novel mechanisms of action and increased target potency, while metal complex formation can improve the stability, solubility and bioavailability of the parent compound. The objectives of this study were optimizing PG production through bacterial fermentation using food waste, allowing good quantities of the pure natural product for further synthesizing and evaluating copper(II) and zinc(II) complexes with it. Their antimicrobial and anticancer activities were assessed, and their binding affinity toward biologically important molecules, bovine serum albumin (BSA) and DNA was investigated by fluorescence emission spectroscopy and molecular docking. The yield of 83.1 mg/L of pure PG was obtained when processed meat waste at 18 g/L was utilized as the sole fermentation substrate. The obtained complexes CuPG and ZnPG showed high binding affinity towards target site III of BSA, and molecular docking simulations highlighted the affinity of the compounds for DNA minor grooves.

Optimization and mechanism studies for the biosorption of rare earth ions by Yarrowia lipolytica.

Research on the recovery of rare earth elements from wastewater has attracted increasing attention. Compared with other methods, biosorption is a simple, efficient, and environmentally friendly method for rare earth wastewater treatment, which has greater prospects for development. The objective of this study was to investigate the biosorption behavior and mechanism of Yarrowia lipolytica for five rare earth ions (La3⁺, Nd3⁺, Er3⁺, Y3⁺, and Sm3⁺) with a particular focus on biosorption behavior, biosorption kinetics, and biosorption isotherm. It was demonstrated that the biosorption capacity of Y. lipolytica at optimal conditions was 76.80 mg/g. It was discovered that the biosorption process complied with the pseudo-second-order kinetic model and the Langmuir biosorption isotherm, indicating that Y. lipolytica employed a monolayer chemical biosorption process to biosorb rare earth ions. Characterization analysis demonstrated that the primary functional groups involved in rare earth ion biosorption were amino, carboxyl, and hydroxyl groups. The cooperative biosorption of rare earth ions by Y. lipolytica was facilitated by means of surface complexation, ion exchange, and electrostatic interactions. These findings suggest that Y. lipolytica has the potential to be an effective biosorbent for the removal of rare earth elements from wastewater.

Solubility, complexation and thermodynamics of the Tc(IV)-isosaccharinic acid system: trends in the M(IV) series.

Isosaccharinic acid (HISA, or ISA in its deprotonated form) is the main degradation product of cellulose under alkaline conditions. It can form strong complexes with radionuclides and other toxic metal ions, eventually enhancing their mobility in the context of nuclear waste repositories and other environmental systems. 99Tc is a redox-sensitive, long-lived fission product produced in high yield in nuclear reactors. The solubility of 99Tc(IV) was investigated in 0.5 M NaCl‒NaISA‒NaOH solutions with 6 ≤ pHm ≤ 12.5 and 10-6 M ≤ [ISA] ≤ 0.2 M. Complete chemical and thermodynamic models were derived on the basis of solubility data, (pe + pHm) measurements, redox speciation, and solid phase characterization. These models include the previously unreported aqueous complexes TcO(OH)(ISA)2‒ and TcO(OH)2(ISA)22‒. In spite of the small size and high polarizability of the Tc4+ metal ion, the Tc(IV)-ISA complexes described in this work are significantly weaker than other ISA complexes formed with larger M4+ metal ions, i.e., Zr, Pu and U. This unexpected behavior can be possibly explained by the strong hydrolysis of Tc(IV) and corresponding stabilization of the TcO2+ moiety, which does not occur for other M(IV) systems. Thermodynamic data derived in this work can be implemented in geochemical calculations of relevance in the context of nuclear waste disposal and other environmental applications.

Study on co-amorphous emerging solubilization behavior after gelation during dissolution: The importance of complexation and anti-crystallization.

Co-amorphous (CM) is a promising technology for enhancing the aqueous solubility of insoluble drugs, but the gelation phenomenon has often occurred during the dissolution process and seriously threatened their solubility/dissolution performance. Therefore, it's quite important to design favorable CM systems to alleviate or even avoid the adverse effects of gelation phenomenon. In this study, CM systems of taxifolin (TAX) and oxymatrine (OMT) (TAX-OMT CMs) were constructed to improve the solubility and dissolution properties of TAX. Interestingly, TAX-OMT CMs gradually aggregated and obviously gelled during dissolution, but the solubility and dissolution of TAX in TAX-OMT CMs were significantly enhanced compared to crystalline TAX. Consequently, the underlying solubilization mechanisms of TAX-OMT CMs after gelation were systematically explored. For one thing, the complexation between the two components in TAX-OMT CMs was verified by phase solubility, fluorescence spectroscopy and isothermal titration calorimetry. For another, the residual solids of TAX-OMT CMs after dissolution evaluation were thoroughly characterized by means of powder X-ray diffraction, fourier transform infrared spectroscopy, scanning electron microscopy, which showed the anti-crystallization property of TAX-OMT CMs. Furthermore, molecular simulation demonstrated the intermolecular interactions of TAX-OMT CMs alone and TAX-OMT complexes in aqueous solution. Finally, pharmacokinetics study in rats suggested that the bioavailability of TAX in TAX-OMT CM (1:2) was approximately 5.5-fold higher than that of crystalline TAX after oral administration. Collectively, this study reveals the importance of complexation and anti-crystallization effects of CM systems on maintaining solubilization behavior after gelation, providing an effective strategy to improve the absorption performance of pharmaceutical CM systems.

Green synthesis of diatom-allophane bio-nanocomposites for highly efficient oxytetracycline adsorption.

The extensive use of the antibiotic oxytetracycline (OTC) has led to considerable environmental contamination and other negative impacts, prompting an urgent need for a green, effective, and innovative OTC adsorption material. In this study, diatom-allophane bio-nanocomposites were synthesized using a simple and eco-friendly method, yielding a homogeneous coating of allophane nanoparticles on diatom surfaces. The resultant bio-nanocomposites were found to have hierarchically porous structures and abundant active sites derived from successful allophane loading and dispersion on diatom surfaces. The OTC adsorption capacity of this novel adsorbent is remarkable (219.112 mg·g-1), surpassing the capacities of raw allophane and diatoms by >5 and 10 times, respectively. Mechanistically, OTC adsorption by the bio-nanocomposites was found to be driven primarily by chemisorption through a process involving complexation between the amide and amino groups on OTC and the aluminum hydroxyl and carboxyl groups on the adsorbent surface. Electrostatic interactions and hydrogen bonding also contribute significantly to OTC capture. Furthermore, the diatom-allophane bio-nanocomposites exhibit excellent performance over a wide pH range (4-7), in the presence of various cations (Na+, K+, Ca2+, Mg2+) and anions (Cl-, NO3-, SO42-), and in real water bodies. These findings demonstrate the potential of the diatom-allophane bio-nanocomposite as a green, efficient, and promising biological-mineral adsorbent for environmental remediation, leveraging the combined utilization of biological and mineral resources.

3D-Printed Interfacially Jammed Emulsion Aerogels.

3D printing ultralightweight porous structures using direct ink writing (DIW) while maintaining their mechanical robustness is highly challenging. This difficulty is amplified when low ink concentrations are used to create complex geometries. Herein, this shortfall was addressed by interfacially jammed emulsion gels. The gel emerged from the electrostatic interaction among synergized nanomaterials (graphene oxide (GO) and cellulose nanocrystals (CNCs)) in the aqueous phase and a ligand in the oil phase. This interaction led to the jamming of the nanoparticles and the creation of stable emulsion gels. The formed interfacial assemblies were further treated by post-jamming ionic cross-linking with NaHCO3, which dictated the emulsion gels' rheological characteristics, enhancing the ink's viscoelastic properties for high-resolution 3D printing. The customizable emulsion system allows control over porosity from the macro- to the micro-scale and generates complex geometries with desired compositions. By manipulating post-annealing processes and varying concentrations, it is possible to achieve aerogels that feature a remarkably low density (∼2.63 mg/cm3) and adjustable mechanical robustness (elastic modulus of 0.45 MPa). Additionally, this method allows for producing aerogels with flexible or stiff characteristics as required, alongside the capability to tailor specific electromagnetic shielding effectiveness (ranging from 6791 to 19615 dB cm2/g), showcasing the technique's versatility and engineerability.

Tailored Supramolecular Interactions in Host-Guest Complexation for Efficient and Stable Perovskite Solar Cells and Modules.

Host-guest complexation offers a promising approach for mitigating surface defects in perovskite solar cells (PSCs). Crown ethers are the most widely used macrocyclic hosts for complexing perovskite surfaces, yet their supramolecular interactions and functional implications require further understanding. Here we show that the dipole moment of crown ethers serves as an indicator of supramolecular interactions with both perovskites and precursor salts. A larger dipole moment, achieved through the substitution of heteroatoms, correlates with enhanced coordination with lead cations. Perovskite films incorporating aza-crown ethers as additives exhibited improved morphology, reduced defect densities, and better energy-level alignment compared to those using native crown ethers. We report power-conversion efficiencies (PCEs) exceeding 25% for PSCs, which show enhanced long-term stability, and a record PCE of 21.5% for host-guest complexation-based perovskite solar modules with an active area of 14.0 cm2.

Emerging Chemical, Biochemical, and Non-Thermal Physical Treatments in the Production of Hypoallergenic Plant Protein Ingredients.

Allergies towards gluten and legumes (such as, soybean, peanut, and faba bean) are a global issue and, occasionally, can be fatal. At the same time, an increasing number of households are shifting to plant protein ingredients from these sources, which application and consumption are limited by said food allergies. Children, the elderly, and people with immune diseases are particularly at risk when consuming these plant proteins. Finding ways to reduce or eliminate the allergenicity of gluten, soybean, peanut, and faba bean is becoming crucial. While thermal and pH treatments are often not sufficient, chemical processes such as glycation, polyphenol conjugation, and polysaccharide complexation, as well as controlled biochemical approaches, such as fermentation and enzyme catalysis, are more successful. Non-thermal treatments such as microwave, high pressure, and ultrasonication can be used prior to further chemical and/or biochemical processing. This paper presents an up-to-date review of promising chemical, biochemical, and non-thermal physical treatments that can be used in the food industry to reduce or eliminate food allergenicity.

Biocompatible Preparation of Beta-Lactoglobulin/Chondroitin Sulfate Carrier Nanoparticles and Modification of Their Colloidal and Hydropathic Properties by Tween 80.

The electrostatic complexation of the protein beta-lactoglobulin (ß-LG) with the anionic polysaccharide chondroitin sulfate (CS) and the subsequent stabilization by thermal treatment were studied to achieve the well-defined nanoparticles (NPs). The formation of the well-defined NPs was obtained at pH 4 with a hydrodynamic radius from 60 to 80 nm. NP aggregation was observed at pH 1.5 because of the loss of the anionic charge of chondroitin sulfate on the surface of the NPs. After thermal treatment, the NPs exhibited stability against a pH increase to pH 7 while a stronger aggregation at pH 1.5 was observed. Core-shell structures were found at pH 7 after thermal treatment, indicating a possible mechanism of partial disintegration. The addition of Tween 80 (T80) before thermal treatment led to the formation of T80 self-assemblies inside the NPs. This caused an increase in the hydrophobicity of the inner and outer surfaces of the NPs as it was observed by fluorescence spectroscopy. The ζ-potential of the complexes and NPs was about -20 mV while the presence of T80 did not affect it. FTIR spectra verified changes of the secondary structure of ß-LG in its complexes with CS and T80. The thermally treated NPs exhibited high surface and overall hydrophobicity and stability in high salinity and biocompatible solutions. The thermally treated NPs showed colloidal and physicochemical stability for 1 month, which were enhanced by the addition of T80. Due to the nature of the precursors and their colloidal properties, the NPs are highly promising for applications as biocompatible drug delivery nanocarriers while T80 acts as an agent to modify their properties.

Stabilized, ROS-sensitive ß-cyclodextrin-grafted hyaluronic supramolecular nanocontainers for CD44-targeted anticancer drug delivery.

Hyaluronic acid (HA)-based tumor microenvironment-responsive nanocontainers are attractive candidates for anticancer drug delivery due to HA's excellent biocompatibility, biodegradability, and CD44-targeting properties. Nevertheless, the consecutive synthesis of stabilized, stealthy, responsive HA-based multicomponent nanomedicines generally requires multi-step preparation and purification procedures, leading to batch-to-batch variation and scale-up difficulties. To develop a facile yet robust strategy for promoted translations, a silica monomer containing a cross-linkable diethoxysilyl unit was prepared to enable in situ crosslinking without any additives. Further combined with the host-guest inclusion complexation between ß-cyclodextrin-grafted HA (HA-CD) and ferrocene-functionalized polymers, ferrocene-terminated poly(oligo(ethylene glycol) methyl ether methacrylate (Fc-POEGMA) and Fc-terminated poly(ε-caprolactone)-b-poly(3-(diethoxymethylsilyl)propyl(2-(methacryloyloxy)ethyl) carbamate) (Fc-PCL-b-PDESPMA), a reactive oxygen species (ROS)-sensitive supramolecular polymer construct, Fc-POEGMA/Fc-PCL-b-PDESPMA@HA-CD was readily fabricated to integrate stealthy POEGMA, tumor active targeting HA, and an in situ cross-linkable PDESPMA sequence. Supramolecular amphiphilic copolymers with two different POEGMA contents of 25 wt% (P1) and 20 wt% (P2) were prepared via a simple physical mixing process, affording two core-crosslinked (CCL) micelles via an in situ sol-gel process of ethoxysilyl groups. The P1-based CCL micelles show not only desired colloidal stability against high dilution, but also an intracellular ROS-mimicking environment-induced particulate aggregation that is beneficial for promoted intracellular release of the loaded cargoes. Most importantly, P1-based nanomedicines exhibited greater cytotoxicity in CD44 receptor-positive HeLa cells than that in CD44 receptor-negative MCF-7 cells. Overall, this work developed HA-based nanomedicines with sufficient extracellular colloidal stability and efficient intracellular destabilization properties for enhanced anticancer drug delivery via smart integration of in situ crosslinking and supramolecular complexation.

Marangoni flows triggered by cationic-anionic surfactant complexation.

HYPOTHESIS: The gradients in surfactant distribution at a fluid-fluid interface can induce fluid flow known as the Marangoni flow. Fluid interfaces found in biological and environmental systems are seldom clean, where mixtures of various surfactants are present. The presence of multi-component surfactant mixtures introduces the possibility of interactions among constituents, which may impact Marangoni flows and alter flow dynamics. EXPERIMENTS: We employed flow visualization, surface tension and reaction kinetic measurements, and numerical simulations to quantitatively investigate the Marangoni flows induced by the reacting surfactant mixtures. Different binary surfactant mixtures were utilized for comparative analysis. FINDINGS: The impact of surfactant interactions on Marangoni flows is confirmed through the observation of diverse complex flow patterns that result from the combination of oppositely charged surfactants in varying composition ratios and concentrations. Unique flow patterns originate from the composition-dependent interfacial phenomena upon mixing surfactants. Our findings provide vital insights that could be used to guide the development of effective oil remediation or the spreading of waterborne pathogens in contaminated regions.

Synthesis of Ordered Mesoporous Molecular Sieve-Supported Cobalt Catalyst via Organometallic Complexation for Propane Non-Oxidative Dehydrogenation.

Co-based catalysts have shown great promise for propane dehydrogenation (PDH) reactions due to their merits of environmental friendliness and low cost. In this study, ordered mesoporous molecular sieve-supported CoOx species (CoOx/Al-SBA-15 catalyst) were prepared by one-step organometallic complexation. The catalysts show worm-like morphology with regular straight-through mesoporous pores and high external specific surface area. These typical features can substantially enhance the dispersion of CoOx species and mass transfer of reactants and products. Compared with the conventional impregnation method, the 10CSOC (10 wt.% Co/Al-SBA-15 prepared by the organometallic complexation method) sample presents a smaller CoOx size and higher Co2+/Co3+ ratio. When applied to PDH reaction, the 10CSOC delivers higher propane conversion and propylene selectivity. Under the optimal conditions (625 °C and 4500 h-1), 10CSOC achieves high propane conversion (43%) and propylene selectivity (83%). This is attributed to the smaller and better dispersion of CoOx nanoparticles, more suitable acid properties, and higher content of Co2+ species. This work paves the way for the rational design of high-performance catalysts for industrially important reactions.