A brief review of perovskite quantum dot solar cells:Synthesis, property and defect passivation.

Perovskite quantum dot solar cells (PQDSCs), as the promising candidate for the next generation of solar cell, have garnered the significant attention over the past decades. However, the performance and stability of PQDSCs are highly dependent on the properties of interfaces between the perovskite quantum dots (PQDs) and the other layers in the device. This work provides a brief overview of PQDSCs, including the synthesis of PQDs, the characteristics and preparation methods of PQDs, the photoelectric properties as the light absorption layer and optimization methods for PQDSCs with high efficiency. Future directions and potential applications are also highlighted.

Reconstruction and Solidification of Dion-Jacobson Perovskite Top and Buried Interfaces for Efficient and Stable Solar Cells.

Quasi-two-dimensional (Q-2D) perovskites show great potential in the field of photonic and optoelectronic device applications. However, defects and local lattice dislocation still limit performance and stability improvement by nonradiative recombination, unpreferred phase distribution, and unbonded amines. Here, a low-temperature synergistic strategy for both reconstructing and solidifying the perovskite top and buried interface is developed. By post-treating the 1,4-phenylenedimethanammonium (PDMA) based (PDMA)MA4Pb5I16 films with cesium acetate (CsAc) before thermal annealing, a condensation reaction between R-COO- and -NH2 and ion exchange between Cs+ and MA+ occur. It converts the unbonded amines to amides and passivates uncoordinated Pb2+. Meanwhile, it adjusts film composition and improves the phase distribution without changing the out-of-plane grain orientation. Consequently, performance of 18.1% and much-enhanced stability (e.g., stability for photo-oxygen increased over 10 times, light-thermal for T90 over 4 times, and reverse bias over 3 times) of (PDMA)MA4Pb5I16 perovskite solar cells are demonstrated.

Enhancing Perovskite Solar Cell Performance through Propylamine Hydroiodide Passivation.

In recent years, the power conversion efficiency of perovskite solar cells has increased rapidly. Perovskites can be prepared using simple and cost-effective solution methods. However, the perovskite films obtained are usually polycrystalline and contain numerous defects. Passivation of these defects is crucial for enhancing the performance of solar cells. Here, we report the use of propylamine hydroiodide (PAI) for defect passivation. We found that PAI can result in higher-efficiency cells by reducing the defects and suppressing non-radiative recombination. Consequently, n-i-p perovskite solar cells with a certificated efficiency of 21% were obtained. In addition, PAI exhibited excellent performance in p-i-n devices by serving as a buried interface layer, leading to an improved efficiency of 23%.

Efficient Polycrystalline Single-Cation Perovskite Light-Emitting Diodes by Simultaneous Intracrystal and Interfacial Defect Passivation.

Polycrystalline perovskite light-emitting diodes (PeLEDs) have shown great promise with high efficiency and easy processability. However, PeLEDs using single-cation polycrystalline perovskite emitters have demonstrated low efficiency due to defects within the grains and at the interfaces between the perovskite layer and the charge injection contact. Thus, simultaneous defect engineering of perovskites to suppress exciton loss within the grains and at the interfaces is crucial for achieving high efficiency in PeLEDs. Here, 1,8-octanedithiol which is a strong nucleophile, is used to increase the luminescence efficiency of a single-cation perovskite by suppressing non-radiative recombination within the grains of their polycrystalline emitter film as well as at their interface with an anode. The dithiol additive performs a multifunctional role in defect passivation, spatial confinement of excitons, and prevention of exciton quenching at the interface between the perovskite layer and the underlying hole-injection layer. Photoluminescence studies demonstrate that incorporating the dithiol additive significantly enhances the charge carrier dynamics in perovskites, resulting in an external quantum efficiency (EQE) of up to 23.46% even in a simplified PeLED that does not use a hole-injection layer. This represents the highest level of EQE achieved among devices utilizing polycrystalline single-cation perovskites.

Regulation of Lead Iodide Crystallization and Distribution for Efficient Perovskite Solar Cells.

At present, the power conversion efficiency (PCE) of perovskite solar cells (PSCs) has reached 26.1%. Polycrystalline perovskite films prepared by sequential deposition are often accompanied by excess PbI2. Although excess PbI2 can reduce the internal defects of the perovskites and promote charge transfer, excess PbI2 is unevenly distributed in the perovskites and easily decomposed into the composite center of charge. Therefore, the growth and distribution of PbI2 crystals can be regulated by introducing 4-fluoroaniline (4-FLA) as an additive into the precursor of PbI2. We observe that the presence of an amino group in 4-FLA leads to a reduction in the strength of van der Waals forces between PbI2 layer structures, thereby facilitating the uniform dispersion of excess PbI2 within the perovskites. Additionally, 4-FLA is restricted from being embedded in the PbI2 layer due to the steric hindrance of 4-FLA and the hydrogen bond interaction between nitrogen atoms and PbI2. Therefore, it leads to better dispersion of PbI2, resulting in better passivation and device efficiency. Based on the hydrophobicity of the benzene ring, the modified perovskite film shows excellent hydrophobicity. Ultimately, we achieved 21.63% PCE and 1.16V VOC. This provides an effective strategy for regulating excess PbI2 to achieve efficient and stable PSCs.

Interface Engineering by Unsubstituted Pristine Nickel Phthalocyanine as Hole Transport Material for Efficient and Stable Perovskite Solar Cells.

Lead halide perovskite solar cells (PSCs) have been rapidly developed in the past decade. With the development of a PSC, interface engineering plays an increasingly important role in maximizing device performance and long-term stability. We report a simple and effective interface engineering method for achieving improvement of PSCs up to 20% by employing unsubstituted pristine nickel phthalocyanine (NiPc). Thermal annealing of NiPc improves the interface between NiPc and perovskite because of the incorporation of NiPc molecules into the perovskite grain boundaries, which creates improvements in hole extraction from the perovskite absorber layer, as evidenced by time-resolved photoluminescence measurements. This significantly improves the charge transfer and collection efficiency, which are closely related to the improvement of the interface between perovskite and NiPc.

Ions-induced Assembly of Perovskite Nanocomposites for Highly Efficient Light-Emitting Diodes with EQE Exceeding 30.

Metal halide perovskites, a cost-effective class of semiconductos, hold great promise for display technologies that demand high-efficiency, color-pure light-emitting diodes (LEDs). Early research on three-dimensional (3D) perovskites showed low radiative efficiencies due to modest exciton binding energies. To inprove luminescence, reducing dimensionality or grain size has been a common approach. However, dividing the perovskite lattice into smaller units may hinder carrier transport, compromising electrical performance. Moreover, the increased surface area introduce additional surface trap states, leading to greater non-radiative recombination. Here, an ions-induced growth method is employed to assembe lattice-anchored perovskite nanocomposites for efficient LEDs with high color purity. This approach enables the nanocomposite thin films, composed of 3D CsPbBr3 and its variant of zero-dimensional (0D) Cs4PbBr6, to feature significant low trap-assisted nonradiative recombination, enhanced light out-coupling with a corrugated surface, and well-balanced charge carrier transport. Based on the resultant 3D/0D perovskite nanocomposites, the perovskite LEDs (PeLEDs) achieving an remarkable external quantum efficiency of 31.0% at the emission peak of 521 nm with a narrow full width at half-maximum of only 18 nm. This sets a new benchmark for color purity in high performance PeLED research, highlighting the significant advantage of this approach.

Robust Imidazole-Linked Covalent Organic Framework Enabling Crystallization Regulation and Bulk Defect Passivation for Highly Efficient and Stable Perovskite Solar Cells.

The low crystallinity of the perovskite layers and many defects at grain boundaries within the bulk phase and at interfaces are considered huge barriers to the attainment of high performance and stability in perovskite solar cells (PSCs). Herein, a robust photoelectric imidazole-linked porphyrin-based covalent organic framework (PyPor-COF) is introduced to precisely control the perovskite crystallization process and effectively passivate defects at grain boundaries through a sequential deposition method. The 1D porous channels, abundant active sites, and high crystallization orientation of PyPor-COF offer advantages for regulating the crystallization of PbI2 and eliminating defects. Moreover, the intrinsic electronic characteristics of PyPor-COF endow a more closely matched energy level arrangement within the perovskite layer, which promotes charge transport and thereby suppresses the recombination of photogenerated carriers. The champion PSCs containing PyPor-COF achieved power conversion efficiencies of 24.10% (0.09 cm2) and 20.81% (1.0 cm2), respectively. The unpackaged optimized device is able to maintain its initial efficiency of 80.39% even after being exposed to air for 2000 h. The device also exhibits excellent heating stability and light stability. This work gives a new impetus to the development of highly efficient and stable PSCs via employing COFs.

Low-Defect-Density Monolayer MoS2 Wafer by Oxygen-Assisted Growth-Repair Strategy.

Atomic chalcogen vacancy is the most commonly observed defect category in two dimensional (2D) transition-metal dichalcogenides, which can be detrimental to the intrinsic properties and device performance. Here a low-defect density, high-uniform, wafer-scale single crystal epitaxial technology by in situ oxygen-incorporated "growth-repair" strategy is reported. For the first time, the oxygen-repairing efficiency on MoS2 monolayers at atomic scale is quantitatively evaluated. The sulfur defect density is greatly reduced from (2.71 ± 0.65) × 1013 down to (4.28 ± 0.27) × 1012 cm-2, which is one order of magnitude lower than reported as-grown MoS2. Such prominent defect deduction is owing to the kinetically more favorable configuration of oxygen substitution and an increase in sulfur vacancy formation energy around oxygen-incorporated sites by the first-principle calculations. Furthermore, the sulfur vacancies induced donor defect states is largely eliminated confirmed by quenched defect-related emission. The devices exhibit improved carrier mobility by more than three times up to 65.2 cm2 V-1 s-1 and lower Schottky barrier height reduced by half (less than 20 meV), originating from the suppressed Fermi-level pinning effect from disorder-induced gap state. The work provides an effective route toward engineering the intrinsic defect density and electronic states through modulating synthesis kinetics of 2D materials.

Heterogeneous Nucleation Regulation Amends Unfavorable Crystallization Orientation and Defect Features of Antimony Selenosulfide Film for High-Efficient Planar Solar Cells.

Antimony selenosulfide (Sb2(S,Se)3) has obtained widespread concern for photovoltaic applications as a light absorber due to superior photoelectric features. Accordingly, various deposition technologies have been developed in recent years, especially hydrothermal deposition method, which has achieved a great success. However, device performances are limited with severe carrier recombination, relating to the quality of absorber and interfaces. Herein, bulk and interface defects are simultaneously suppressed by regulating heterogeneous nucleation kinetics with barium dibromide (BaBr2) introduction. In details, the Br adsorbs and dopes on the polar planes of cadmium sulfide (CdS) buffer layer, promoting the exposure of nonpolar planes of CdS, which facilitates the favorable growth of [hk1]-Sb2(S,Se)3 films possessing superior crystallinity and small interface defects. Additionally, the Se/S ratio is increased due to the replacement of S/Se by Br, causing a downshift of the Fermi levels with a benign band alignment and a shallow-level defect. Moreover, Ba2+ is located at grain boundaries by coordination with S and Se ions, passivating grain boundary defects. Consequently, the efficiency is increased from 7.70% to 10.12%. This work opens an avenue towards regulating the heterogeneous nucleation kinetics of Sb2(S,Se)3 film deposited via hydrothermal deposition approach to optimize its crystalline orientation and defect features.

Efficient and Stable Red Perovskite Light-Emitting Diodes via Thermodynamic Crystallization Control.

Efficient and stable red perovskite light-emitting diodes (PeLEDs) demonstrate promising potential in high-definition displays and biomedical applications. Although significant progress has been made in device performance, meeting commercial demands remains a challenge in the aspects of long-term stability and high external quantum efficiency (EQE). Here, an in situ crystallization regulation strategy is developed for optimizing red perovskite films through ingenious vapor design. Mixed vapor containing dimethyl sulfoxide and carbon disulfide (CS2) is incorporated to conventional annealing, which contributes to thermodynamics dominated perovskite crystallization for well-aligned cascade phase arrangement. Additionally, the perovskite surface defect density is minimized by the CS2 molecule adsorption. Consequently, the target perovskite films exhibit smooth exciton energy transfer, reduced defect density, and blocked ion migration pathways. Leveraging these advantages, spectrally stable red PeLEDs are obtained featuring emission at 668, 656, and 648 nm, which yield record peak EQEs of 30.08%, 32.14%, and 29.04%, along with prolonged half-lifetimes of 47.7, 60.0, and 43.7 h at the initial luminances of 140, 250, and 270 cd m-2, respectively. This work provides a universal strategy for optimizing perovskite crystallization and represents a significant stride toward the commercialization of red PeLEDs.

Enhanced Performance and Stability of Perovskite Solar Cells Through Surface Modification with Benzocaine Hydrochloride.

Current development of inverted p-i-n perovskite solar cells (PSCs), with nickel oxide as the hole transport layer, is progressing toward lower net costs, higher efficiencies, and superior stabilities. Unfortunately, the high density of defect-based traps on the surface of perovskite films significantly limits the photoelectric conversion efficiency and operational stability of perovskite solar cells. Finding cost-effective interface modifiers is crucial for the further commercial development of p-i-n PSCs. In the present work, we report a passivation strategy using a multifunctional molecule, benzocaine hydrochloride (BHC), which is shown to reduce defect density and enhance the photovoltaic performance and stability of the resultant p-i-n PSCs. It has been revealed that BHC strongly interacts with perovskite precursor components and triggers the evolution of the perovskite absorber film morphology and enables improved surface energy level alignment, thus promoting charge carrier transport and extraction. These properties are beneficial for improving open-circuit voltage (VOC) and fill factor (FF). Our results show that the photoelectric conversion efficiency (PCE) of p-i-n PSCs with nickel oxide as the hole transport layer increased from an initial 20.0% to 22.1% after being passivated with BHC, and these passivated devices also exhibited improved stability. DFT calculations reveal the unusual ability of the BHC passivant to improve band alignment while also preventing the accumulation of holes at the interface. In this work, the advantages of BHC passivation are demonstrated by linking theoretical calculations with optical and electrical characterizations.

Molecularly Engineered Alicyclic Organic Spacers for 2D/3D Hybrid Tin-based Perovskite Solar Cells.

The high defect density and inferior crystallinity remain great hurdles for developing highly efficient and stable Sn-based perovskite solar cells (PSCs). 2D/3D heterostructures show strong potential to overcome these bottlenecks; however, a limited diversity of organic spacers has hindered further improvement. Herein, a novel alicyclic organic spacer, morpholinium iodide (MPI), is reported for developing structurally stabilized 2D/3D perovskite. Introducing a secondary ammonium and ether group to alicyclic spacers in 2D perovskite enhances its rigidity, which leads to increased hydrogen bonding and intermolecular interaction within 2D perovskite. These strengthened interactions facilitate the formation of highly oriented 2D/3D perovskite with low structural disorder, which leads to effective passivation of Sn and I defects. Consequently, the MP-based PSCs achieved a power conversion efficiency (PCE) of 12.04% with superior operational and oxidative stability. This work presents new insight into the design of organic spacers for highly efficient and stable Sn-based PSCs.

One-Stone-For-Three-Birds Strategy Using a Fullerene Modifier for Efficient and Stable Inverted Perovskite Solar Cells.

The electron extraction from perovskite/C60 interface plays a crucial role in influencing the photovoltaic performance of inverted perovskite solar cells (PSCs). Here, we develop a one-stone-for-three-birds strategy via employing a novel fullerene derivative bearing triple methyl acrylate groups (denoted as C60-TMA) as a multifunctional interfacial layer to optimize electron extraction at the perovskite/C60 interface. It is found that the C60-TMA not only passivates surface defects of perovskite via coordination interactions between C=O groups and Pb2+ cations but also bridge electron transfer between perovskite and C60. Moreover, it effectively induces the secondary grain growth of the perovskite film through strong bonding effect, and this phenomenon has never been observed in prior art reports on fullerene related studies. The combination of the above three upgrades enables improved perovskite film quality with increased grain size and enhanced crystallinity. With these advantages, C60-TMA treated PSC devices exhibit a much higher power conversion efficiency (PCE) of 24.89% than the control devices (23.66%). Besides, C60-TMA benefits improved thermal stability of PSC devices, retaining over 90% of its initial efficiency after aging at 85 °C for 1200 h, primarily due to the reinforced interfacial interactions and improved perovskite film quality.

Crown Ethers with Different Cavity Diameters Inhibit Ion Migration and Passivate Defects toward Efficient and Stable Lead Halide Perovskite Solar Cells.

Organic-inorganic hybrid metal halide perovskite solar cells have been considered as one of the most promising next-generation photovoltaic technologies. Nevertheless, perovskite defects and Li+ ionic migration will seriously affect the power conversion efficiency and stability of the formal device. Herein, we designed two crown ether derivatives (PC12 and PC15) with different cavity diameters, which selectively bind to different metal cations. It is found that PC15 in perovskite precursor solution can actively regulate the nucleation and crystallization processes and passivate the uncoordinated Pb2+ ions, while PC12 at the interface between the perovskite layer and hole-transporting layer can effectively inhibit the migration of Li+ ions and reduce nonradiative recombination losses. Therefore, PC12 and PC15 can act as "lubricant" and defect passivators, as well as inhibitors of ion migration, when they are synergistically applied at the surface and bulk of perovskite layer. Consequently, the optimized device achieved a champion efficiency of 24.8% with significantly improved humidity, thermal, and light stability.

Lattice Strain Regulation and Halogen Vacancies Passivation Enable High-Performance Formamidine-Based Perovskite Solar Cells.

Formamidinium lead iodide (FAPbI3) perovskite has lately surfaced as the preferred contender for highly proficient and robust perovskite solar cells (PSCs), owing to its favorable bandgap and superior thermal stability. Nevertheless, volatilization and migration of iodide ions (I-) result in non-radiating recombination centers, and the presence of large formamidine (FA) cations tends to cause lattice strain, thereby reducing the power conversion efficiency (PCE) and stability of PSCs. To solve these problems, the lead formate (PbFa) is added into the perovskite solution, which effectively mitigates the halogen vacancy and provides tensile strain outside the perovskite lattice, thereby enhancing its properties. The strong coordination between the C═O of HCOO- and Pb-I backbones effectively immobilizes anions, significantly increases the energy barrier for anion vacancy formation and migration, and reduces the risk of lead ion (Pb2+) leakage, thereby improving the operation and environmental safety of the device. Consequently, the champion PCE of devices with Ag electrodes can be increased from 22.15% to 24.32%. The unencapsulated PSCs can still maintain 90% of the original PCE even be stored in an N2 atmosphere for 1440 h. Moreover, the target devices have significantly improved performance in terms of light exposure, heat, or humidity.

Synergy Between Dynamic Behavior of Hydrogen Defects and Non-Radiative Recombination in Metal-Halide Perovskites.

In organic-inorganic hybrid perovskite solar cells (PSCs), hydrogen defects introduce deep-level trap states, significantly influencing non-radiative recombination processes. Those defects are primarily observed in MA-PSCs rather than FA-PSCs. As a result, MA-PSCs demonstrated a lower efficiency of 23.6% compared to 26.1% of FA-PSCs. In this work, both hydrogen vacancy (VH -) and hydrogen interstitial (Hi -) defects in MAPbI3 bulk and on surfaces, respectively are investigated. i) Bulk VH - defects have dramatic impact on non-radiative recombination, with lifetime varying from 67 to 8 ns, depending on whether deprotonated MA0 are ion-bonded or not. ii) Surface H-defects exhibited an inherent self-healing mechanism through a chemical bond between MA0 and Pb2+, indicating a self-passivation effect. iii) Both VH - and Hi - defects can be mitigated by alkali cation passivation; while large cations are preferable for VH - passivation, given strong binding energy of cation/perovskite, as well as, weak band edge non-adiabatic couplings; and small cations are suited for Hi - passivation, considering the steric hindrance effect. The dual passivation strategy addressed diverse experimental outcomes, particularly in enhancing performance associated with cation selections. The dynamic connection between hydrogen defects and non-radiative recombination is elucidated, providing insights into hydrogen defect passivation essential for high-performance PSCs fabrication.

Elucidating the Role of Alkali Metal Carbonates in Impact on Oxygen Vacancies for Efficient and Stable Perovskite Solar Cells.

Effectively suppressing nonradiative recombination at the SnO2/perovskite interface is imperative for perovskite solar cells. Although the capabilities of alkali salts at the SnO2/perovskite interface have been acknowledged, the effects and optimal selection of alkali metal cations remain poorly understood. Herein, a novel approach for obtaining the optimal alkali metal cation (A-cation) at the interface is investigated by comparatively analyzing different alkali carbonates (A2CO3; Li2CO3, Na2CO3, K2CO3, Rb2CO3, and Cs2CO3). Theoretical calculations demonstrate that A2CO3 coordinates with undercoordinated Sn and O on the surface, effectively mitigating oxygen vacancy (VO) defects with increasing A-cation size, whereas Cs2CO3 exhibits diminished preferability owing to enhanced steric hindrance. The experimental results highlight the crucial role of Rb2CO3 in actively passivating VO defects, forming a robust bond with SnO2, and facilitating Rb+ diffusion into the perovskite layer, thereby enhancing charge extraction, alleviating deep-level trap states and structural distortion in the perovskite film, and significantly suppressing nonradiative recombination. X-ray absorption spectroscopy analyses further reveal the effect of Rb2CO3 on the local structure of the perovskite film. Consequently, a Rb2CO3-treated device with aperture area of 0.14 cm2 achieves a notable efficiency of 22.10%, showing improved stability compared to the 20.11% achieved for the control device.

Tailored Supramolecular Interactions in Host-Guest Complexation for Efficient and Stable Perovskite Solar Cells and Modules.

Host-guest complexation offers a promising approach for mitigating surface defects in perovskite solar cells (PSCs). Crown ethers are the most widely used macrocyclic hosts for complexing perovskite surfaces, yet their supramolecular interactions and functional implications require further understanding. Here we show that the dipole moment of crown ethers serves as an indicator of supramolecular interactions with both perovskites and precursor salts. A larger dipole moment, achieved through the substitution of heteroatoms, correlates with enhanced coordination with lead cations. Perovskite films incorporating aza-crown ethers as additives exhibited improved morphology, reduced defect densities, and better energy-level alignment compared to those using native crown ethers. We report power-conversion efficiencies (PCEs) exceeding 25 % for PSCs, which show enhanced long-term stability, and a record PCE of 21.5 % for host-guest complexation-based perovskite solar modules with an active area of 14.0 cm2.

Monoammonium Modified Dion-Jacobson Quasi-2D Perovskite for High Efficiency Pure-Blue Light Emitting Diodes.

Quasi-2D perovskites exhibit impressive optoelectronic properties and hold significant promise for future light-emitting devices. However, the efficiency of perovskite light-emitting diodes (PeLEDs) is seriously limited by defect-induced nonradiative recombination and imbalanced charge injection. Here, the defect states are passivated and charge injection balance is effectively improved by introducing the additive cyclohexanemethylammonium (CHMA) to bromide-based Dion-Jacobson (D-J) structure quasi-2D perovskite emission layer. CHMA participates in the crystallization of perovskite, leading to high quality film composed of compact and well-contacted grains with enhanced hole transportation and less defects. As a result, the corresponding PeLEDs exhibit stable pure blue emission at 466 nm with a maximum external quantum efficiency (EQE) of 9.22%. According to current knowledge, this represents the highest EQE reported for pure-blue PeLEDs based on quasi-2D bromide perovskite thin films. These findings underscore the potential of quasi-2D perovskites for advanced light-emitting devices and pave the way for further advancements in PeLEDs.