Advancing gasoline desulfurization: Multi-objective fuzzy optimization in systems technology.

Ultrasonic-assisted oxidative desulfurization (UAOD) is utilized to lessen environmental problems due to sulfur emissions. The process uses immiscible polar solvents and ultrasonic waves to enhance desulfurization efficiency. Prior research focused on comparing the effectiveness of UAOD for gasoline using response surface methodology. This study evaluates the desulfurization efficiency and operating costs, including ultrasonic power, irradiation time, and oxidant amount to determine optimal conditions. The study used a multi-objective fuzzy optimization (MOFO) approach to evaluate the economic viability of UAOD for gasoline. It identified upper and lower boundaries and then optimized the desulfurization efficiency and operating costs while considering uncertainty errors. The fuzzy model employed max-min aggregation to optimize the degree of satisfaction on a scale from 0 (unsatisfied) to 1 (satisfied). Optimal conditions for gasoline UAOD were found at 445.43 W ultrasonic power, 4.74 min irradiation time, and 6.73 mL oxidant, resulting in a 66.79 % satisfaction level. This yielded a 78.64 % desulfurization efficiency (YA) at an operating cost of 13.49 USD/L. Compared to existing literature, gasoline desulfurization was less efficient and less costly. The solutions provided by MOFO demonstrate not only economic viability through decreased overall operating costs and simplified process conditions, but also offer valuable insights for optimizing prospective future industrial-scale UAOD processes.

A critical review on the use of flue gas desulfurization gypsum to ameliorate saline-alkali soils and its prospect for reducing carbon emissions.

Flue gas desulfurization gypsum (FGDG), a solid waste produced during sulfur removal in coal-fired power plants, has applications in saline-alkali soil amelioration due to its function of calcium­sodium ion exchange. Existing research has focused on the use of gypsum to improve saline-alkali soils in non-coastal areas. However, coastal areas are not only extensively salinized, but an important source of methane, and surprisingly, FGDG may assist to decrease methane formation mainly by the action of sulfate radical. This is the first critical review to systematically discuss the effects of FGDG on both saline-alkali soil improvement and carbon emission control in tidal flats, including application status, amendment principles, environmental risks and methane emission control. After adding FGDG, soil salinization degree was weakened via adjusting soil structure, pH, exchangeable sodium percentage and electric conductivity, introduction of nutrients also promotes crop growth. The optimal FGDG dosage in tidal flats seems to be higher (>2 %) than that in non-coastal areas (<1 %). Its environmental risks regarding heavy metals and eutrophication are evaluated safe. In tidal areas, more methane is produced in hot seasons and ebb tides. Plants and invertebrates also promote methane release. FGDG controls methane production by promoting the activity of sulfate-reducing bacteria and inhibiting methanogens. Considering methane flux levels and seawater erosion, FGDG use in low tidal beach needs more research, while that in high and middle tidal beach is recommended. This review will expand applications and appropriate use of FGDG for reducing carbon emission and improving ecological services in coastal areas.

The effective separation of photogenerated carriers in MIL101 nanocomposites promoting the efficient photocatalytic desulfurization in air.

The extensive industrial applications of fuel oil, a critical strategic resource, are accompanied by significant environmental and health concerns due to the presence of sulfur-containing compounds in its composition, which result in hazardous combustion waste. Extensive research has been conducted to develop technologies for low-vulcanization fuel production to address this issue. Consequently, the investigation of catalysts for environmentally friendly and safe photocatalytic desulfurization becomes imperative. To that end, we have designed efficient MIL-101(Fe)/CQDs@g-C3N4 (MIL101/CDs-C3N4) Z-scheme heterojunction photocatalysts with high carrier separation and mobility through a thermal polymerization-hydrothermal strategy. The high concentration of photogenerated carriers facilitates the activation of oxygen and H2O2, leading to increased production of ROS (·O2-, ·OH, h+), thereby enhancing the photocatalytic desulfurization (PODS). Additionally, DFT calculations were utilized to determine the electron migration pathways of the catalysts and adsorption energies of DBT (dibenzothiophene). Moreover, Gibbs free energy calculations indicated that MIL101/CDs-C3N4 exhibited the lowest activation energy for oxygen and H2O2. The mechanism of photocatalytic desulfurization was proposed through a combination of theoretical calculations and experimental studies. This study provides guidance for the development of MOF-based Z-scheme systems and their practical application in desulfurization processes.

Controllable Synthesis of Titanium Silicon Molecular Zeolite Nanosheet with Short b-Axis Thickness and Application in Oxidative Desulfurization.

Titanium silicon molecular zeolite (TS-1) plays an important role in catalytic reactions due to its unique nanostructure. The straight channel on TS-1 was parallel to the orientation of the short b-axis and directly exposed to the aperture of the 10-member ring with a diameter of 0.54 nm × 0.56 nm. This structure could effectively reduce the diffuse restriction of bulk organic compounds during the oxidative desulfurization process. As a kind of cationic polymer electrolyte, polydimethyldiallyl ammonium chloride (PDDA) contains continuous [C8H16N+Cl-] chain segments, in which the Cl- could function as an effective structure-directing agent in the synthesis of nanomaterials. The chain of PDDA could adequately interact with the [0 1 0] plane in the preparation process of zeolite, and then the TS-1 nanosheet with short b-axis thickness (6 nm) could be obtained. The pore structure of the TS-1 nanosheet is controlled by regulating the content of PDDA. Scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), N2 physical adsorption analysis, infrared absorption spectrum and ultraviolet-visible spectrum were used to determine the TS-1. The thinner nanosheets exhibit excellent catalytic performance in oxidative desulfurization of dibenzothiophene (DBT), in which the removal rate could remain at 100% after three recycles. Here, the TS-1 nanosheet with short b-axis thickness has a promising future in catalytic reactions.

Qualitative Analysis of Nitrogen and Sulfur Compounds in Vacuum Gas Oils via Matrix-Assisted Laser Desorption Ionization Time of Flight Mass Spectrometry.

Analysis of the heavy fractions in crude oil has been important in petroleum industries. It is well known that heavy fractions such as vacuum gas oils (VGOs) include heteroatoms, of which sulfur and nitrogen are often characterized in many cases. We conducted research regarding the molecular species analysis of VGOs. Further refine processes using VGOs are becoming important when considering carbon recycling. In this work, we attempted to classify compounds within VGOs provided by Kuwait Institute for Scientific Research. Two VGOs were priorly distillated from Kuwait Export crude and Lower Fars crude. Quantitative analysis was performed mainly using matrix-assisted laser desorption ionization time of flight mass spectrometry (MALDI-TOFMS). MALDI-TOF-MS has been developed for analyzing high-molecular-weight compounds such as polymer and biopolymers. As matrix selection is one of the most important aspects in MALDI-TOFMS, the careful selection of a matrix was firstly evaluated, followed by analysis using a Kendrick plot with nominal mass series (z*). The objective was to evaluate if this work could provide an effective classification of VGOs compounds. The Kendrick plot is a well-known method for processing mass data. The difference in the Kendrick mass defect (KMD) between CnH2n-14S and CnH2n-20O is only 0.0005 mass units, which makes it difficult in general to distinguish these compounds. However, since the z* value showed effective differences during the classification of these compounds, qualitative analysis could be possible. The analysis using nominal mass series showed the potential to be used as an effective method in analyzing heavy fractions.

Deep Desulfurization of High-Sulfur Petroleum Coke via Alkali Catalytic Roasting Combined with Ultrasonic Oxidation.

The sulfur in petroleum coke is harmful to carbon products, underscoring the importance of desulfurization for high-sulfur petroleum coke. This paper proposes a method combining alkaline catalytic roasting with ultrasonic oxidation for the deep desulfurization of high-sulfur petroleum coke. The results show that the desulfurization rate reaches 88.99% and the sulfur content is reduced to 0.83 wt.% under a coke particle size of 96-75 µm, sodium-hydroxide-to-petroleum-coke ratio of 50%, roasting temperature of 700 °C, and holding time of 2 h. The alkali-calcined petroleum coke is ultrasonically oxidized and desulfurized in peracetic acid. The results show that, under a hydrogen peroxide content of 10%, hydrogen-peroxide-(liquid)-to-petroleum-coke (solid) ratio of 20 mL/g, acetic acid content of 5 mL, ultrasonic power of 300 W, reaction temperature of 60 °C, and reaction duration of 4 h, the sulfur content is reduced to 0.15 wt.% and the total desulfurization reaches 98.01%. Through a series of characterizations, the proposed desulfurization mechanism is verified. Alkali roasting effectively removes a significant portion of sulfur in petroleum coke. However, the elimination of certain sulfur compounds, such as the more complex thiophene, presents challenges. The thiophene content is subsequently removed via ultrasonic oxidation.

Efficient and promising oxidative desulfurization of fuel using Fenton like deep eutectic solvent.

Oxidative desulfurization (ODS) has emerged as a prominent technique for the removal of sulfur compounds from fuels, aiming to comply with stringent environmental regulations and minimize sulfur dioxide emissions. Herein, Fenton-like deep eutectic solvents (DESs) were synthesized as a catalyst and reaction medium and their application for the ODS process was investigated. The study encompassed the optimization of DES composition, reaction conditions, and the influence of different parameters on the desulfurization efficiency. The experimental findings demonstrated that the Fenton-like DES exhibited outstanding catalytic activity in the oxidative desulfurization of fuel. The optimized conditions involved conducting the reaction at room temperature for 2.5 h, using 200 mg of the prepared DES (HNFM-FeCl4) as both the extraction solvent and catalyst. An oxidant-to-sulfur (O/S) ratio of approximately 3:1 was maintained, with a 30 wt% H2O2 solution utilized as the oxidant. The analysis of the reaction products using GC-MS revealed a remarkable yield of 98% for dibenzothiophene sulfone. The DES provided a suitable medium for the reaction, enhancing the solubility and availability of sulfur compounds. The iron catalyst, in the presence of hydrogen peroxide, facilitated the oxidation of sulfur-containing compounds to their corresponding sulfones, which can be easily separated from the fuel phase. The DES catalysts exhibited stability and recyclability, making them suitable for practical applications in fuel desulfurization processes.

ι-Carrageenan catabolism is initiated by key sulfatases in the marine bacterium Pseudoalteromonas haloplanktis LL1.

Marine bacteria contribute substantially to cycle macroalgae polysaccharides in marine environments. Carrageenans are the primary cell wall polysaccharides of red macroalgae. The carrageenan catabolism mechanism and pathways are still largely unclear. Pseudoalteromonas is a representative bacterial genus that can utilize carrageenan. We previously isolated the strain Pseudoalteromonas haloplanktis LL1 that could grow on ι-carrageenan but produce no ι-carrageenase. Here, through a combination of bioinformatic, biochemical, and genetic analyses, we determined that P. haloplanktis LL1 processed a desulfurization-depolymerization sequential pathway for ι-carrageenan utilization, which was initiated by key sulfatases PhSulf1 and PhSulf2. PhSulf2 acted as an endo/exo-G4S (4-O-sulfation-ß-D-galactopyranose) sulfatase, while PhSulf1 was identified as a novel endo-DA2S sulfatase that could function extracellularly. Because of the unique activity of PhSulf1 toward ι-carrageenan rather than oligosaccharides, P. haloplanktis LL1 was considered to have a distinct ι-carrageenan catabolic pathway compared to other known ι-carrageenan-degrading bacteria, which mainly employ multifunctional G4S sulfatases and exo-DA2S (2-O-sulfation-3,6-anhydro-α-D-galactopyranose) sulfatase for sulfate removal. Furthermore, we detected widespread occurrence of PhSulf1-encoding gene homologs in the global ocean, indicating the prevalence of such endo-acting DA2S sulfatases as well as the related ι-carrageenan catabolism pathway. This research provides valuable insights into the enzymatic processes involved in carrageenan catabolism within marine ecological systems.IMPORTANCECarrageenan is a type of linear sulfated polysaccharide that plays a significant role in forming cell walls of marine algae and is found extensively distributed throughout the world's oceans. To the best of our current knowledge, the ι-carrageenan catabolism in marine bacteria either follows the depolymerization-desulfurization sequential process initiated by ι-carrageenase or starts from the desulfurization step catalyzed by exo-acting sulfatases. In this study, we found that the marine bacterium Pseudoalteromonas haloplanktis LL1 processes a distinct pathway for ι-carrageenan catabolism employing a specific endo-acting DA2S-sulfatase PhSulf1 and a multifunctional G4S sulfatase PhSulf2. The unique PhSulf1 homologs appear to be widely present on a global scale, indicating the indispensable contribution of the marine bacteria containing the distinct ι-carrageenan catabolism pathway. Therefore, this study would significantly enrich our understanding of the molecular mechanisms underlying carrageenan utilization, providing valuable insights into the intricate roles of marine bacteria in polysaccharide cycling in marine environments.

[Effects of Different Modified Materials on Soil Fungal Community Structure in Saline-Alkali Soil].

Studying the effects of different modified materials on the physicochemical properties and fungal community structure of saline-alkali soil can provide theoretical basis for reasonable improvement of saline-alkali soil. High-throughput sequencing technology was used to explore the effects of five treatments, namely, control (CK), desulfurization gypsum (T1), soil ameliorant (T2), organic fertilizer (T3), and desulfurization gypsum compounds soil ameliorant and organic fertilizer (T4), on soil physicochemical properties and fungal community diversity, composition, and structure of saline-alkali soil in Hetao Plain, Inner Mongolia. The results showed that compared with those in CK, the contents of available phosphorus, available potassium, organic matter, and alkali hydrolysis nitrogen were significantly increased in modified material treatments, and the T4 treatment significantly decreased soil pH. Modified treatments increased the Simpson and Shannon indexes of fungi but decreased the Chao1 index. The dominant fungi were Ascomycota, Basidiomycota, and Mortierellomycota, and the dominant genera were Mortierella, Conocybe, Botryotrichum, Fusarium, and Pseudogymnoascus. The application of modified materials increased the relative abundance of Ascomycota, Basidiomycota, Fusarium, and Pseudogymnoascus, while decreasing the relative abundance of Mortierellomycota, Chytridiomycota, and Mortierella. LEfSe analysis showed that modified treatments altered the fungal community biomarkers. Correlation analysis showed that pH and available potassium were the main environmental factors affecting fungal community structure. The results can provide scientific basis for improving saline-alkali soil and increasing soil nutrients in Hetao Plain, Inner Mongolia.

Porous Organic Polymers for Efficient and Selective SO2 Capture from CO2-rich Flue Gas.

The quest for effective technologies to reduce SO2 pollution is crucial due to its adverse effects on the environment and human health. Markedly, removing a ppm level of SO2 from CO2-containing waste gas is a persistent challenge, and current technologies suffer from low SO2/CO2 selectivity and energy-intensive regeneration processes. Here using the molecular building blocks approach and theoretical calculation, we constructed two porous organic polymers (POPs) encompassing pocket-like structures with exposed imidazole groups, promoting preferential interactions with SO2 from CO2-containing streams. Markedly, the evaluated POPs offer outstanding SO2/CO2 selectivity, high SO2 capacity, and an easy regeneration process, making it one of the best materials for SO2 capture. To gain better structural insights into the notable SO2 selectivity of the POPs, we used dynamic nuclear polarization NMR spectroscopy (DNP) and molecular modelling to probe the interactions between SO2 and POP adsorbents. The newly developed materials are poised to offer an energy-efficient and environment-friendly SO2 separation process while we are obliged to use fossil fuels for our energy needs.

Mechanical insights into desulfurization by peroxymonosulfate oxidation via a non-reactive oxygen species pathway.

Air pollution by sulfur dioxide (SO2) remains a pressing concern for both the environment and human health. Desulfurization enhanced by persulfate based advanced oxidation processes (PS-AOPs) has been proven to be a feasible method. However, the inherent contradiction between the rapid diffusion mass transfer of SO2 in the "gas-liquid-gas" phase and the limited lifespan of reactive oxygen species (ROS) can not be ignored. Excessive investment in PS is required to sustainably generate ROS to achieve continuous desulfurization performance, which may lead to excessive PS consumption. To address this issue, whether PS can achieve the oxidation absorption of SO2 via a non-reactive oxygen species pathway was investigated. Experimental and computational results demonstrated that peroxymonosulfate (PMS) instead of peroxydisulfate (PDS) had a great SO2 removal performance, the utilization of PS could be effectively achieved by maintaining a 1:1 molar ratio of PMS and removed SO2. The presence of HOO bonds in the PMS introduced a partial positive charge to the oxygen atom, making the PMS polar and more susceptible to be attacked by the nucleophile HSO3-. So SO2 underwent a series of processes including dissolution, dissociation, one-oxygen atom transfer, and ionization before ultimately being converted into SO42- ions, effectively achieving its removal from flue gas. This study may presents a novel approach for achieving high-efficiency flue gas desulfurization.

[Simultaneous determination of eight organic amines in desulfurization solution by ion chromatography].

The applications of organic-amine desulfurization have steadily increased owing to its high efficiency, low cost, and low energy consumption. Different proportions of organic amines exert different effects on sulfur dioxide removal. Therefore, the accurate determination of different organic amines in the desulfurization solution is of great importance. The ion-chromatographic method for the detection of organic amines does not require a derivatization step, has simple pretreatment procedures, and allows for the simultaneous determination of many types of organic amines. In this study, a method based on ion chromatography was developed for the simultaneous determination of ethanolamine (MEA), diethylethanolamine (DEEA), n-methyldiethanolamine (MDEA), 2-amino-2-methyl-1-propanol (AMP), hydroxyethylethylenediamine (AEEA), piperazine (PZ), n-hydroxyethylpiperazine (HEPZ), and diethylenetriamine (DETA). The separation efficiency of the eight organic amines in different types of columns, leaching solutions, and column temperatures were compared. The determination was performed using an IonPac CS17 column with column temperature of 35 ℃ and gradient leaching with methyl sulfonic acid (MSA) solution via the inhibition conductance method. Samples of the desulfurization solution were analyzed using ultrapure water filtered through a 0.22 µm nylon microporous filter membrane and an OnGuard Ⅱ RP column; thus, the pretreatment steps are simple. The eight organic amines showed a good linear relationship within a certain concentration range, and the coefficient of determinations (R2) were greater than 0.998. The limits of detection (LODs) and quantification (LOQs) were determined from the mass concentrations of the organic amines corresponding to signal-to-noise ratios (S/N) of 3 and 10, respectively. LODs of 0.02-0.08 mg/L and LOQs of 0.07-0.27 mg/L were determined from a 1.0 µL sample injection. The actual recoveries ranged from 93.0% to 111%, and the relative standard deviations (RSDs, n=5) ranged from 0.31% to 1.2%. The results indicated that the proposed method has good accuracy and precision; thus, it is suitable for the determination of various organic amines in desulfurization solution.

Extraction of Dibenzyl Disulfide from Transformer Oils by Acidic Ionic Liquid.

In recent years, dibenzyl disulfide (DBDS) in transformer oils has caused many transformer failures around the world, and its removal has attracted more attention. In this work, nine imidazolium-based ionic liquids (ILs) were applied as effective, green desulfurization extractants for DBDS-containing transformer oil for the first time. The results show that the desulfurization ability of the ILs for DBDS followed the order of [BMIM]FeCl4 > [BMIM]N(CN)2 > [BMIM]SCN > [BMIM](C4H9O)2PO2 > [BMIM]MeSO4 > [BMIM]NTf2 > [BMIM]OTf > [BMIM]PF6 > [BMIM]BF4. Especially, [BMIM]FeCl4 ionic liquid had excellent removal efficiency for DBDS, with its S partition coefficient KN (S) being up to 2642, which was much higher than the other eight imidazolium-based ILs. Moreover, the extractive performance of [BMIM]FeCl4 increased with an increasing molar ratio of FeCl3 to [BMIM]Cl, which was attributed to its Lewis acidity and fluidity. [BMIM]FeCl4 ionic liquid could also avail in the desulfurization of diphenyl sulfide (DPS) from model oils. The experimental results demonstrate that π-π action, π-complexation, and Lewis acid-base interaction played important roles in the desulfurization process. Finally, the ([BMIM]FeCl4) ionic liquid could be recycled five times without a significant decrease in extractive ability.

Effect of Mineral Admixtures on Physical, Mechanical, and Microstructural Properties of Flue Gas Desulfurization Gypsum-Based Self-Leveling Mortar.

The production of flue gas desulfurization gypsum poses a serious threat to the environment. Thus, utilizing gypsum-based self-leveling mortar (GSLM) stands out as a promising and effective approach to address the issue. ß-hemihydrate gypsum, cement, polycarboxylate superplasticizer, hydroxypropyl methyl cellulose ether (HPMC), retarder, and defoamer were used to prepare GSLM. The impact of mineral admixtures (steel slag (SS), silica fume (SF), and fly ash (FA)) on the physical, mechanical, and microstructural properties of GSLM was examined through hydration heat, X-ray diffractometry (XRD), Raman spectroscopy, and scanning electron microscopy (SEM) analyses. The GSLM benchmark mix ratio was determined as follows: 94% of desulfurization building gypsum, 6% of cement, 0.638% each of water reducer and retarder, 0.085% each of HPMC and defoamer (calculated additive ratio relative to gypsum), and 0.54 water-to-cement ratio. Although the initial fluidity decreased in the GSLM slurry with silica fume, there was minimal change in 30 min fluidity. Notably, at an SS content of 16%, the GSLM exhibited optimal flexural strength (6.6 MPa) and compressive strength (20.4 MPa). Hydration heat, XRD, and Raman analyses revealed that a small portion of SS actively participated in the hydration reaction, while the remaining SS served as a filler.

Microbially Mediated Rubber Recycling to Facilitate the Valorization of Scrap Tires.

The recycling of scrap tire rubber requires high levels of energy, which poses challenges to its proper valorization. The application of rubber in construction requires significant mechanical and/or chemical treatment of scrap rubber to compatiblize it with the surrounding matrix. These methods are energy-consuming and costly and may lead to environmental concerns associated with chemical leachates. Furthermore, recent methods usually call for single-size rubber particles or a narrow rubber particle size distribution; this, in turn, adds to the pre-processing cost. Here, we used microbial etching (e.g., microbial metabolism) to modify the surface of rubber particles of varying sizes. Specifically, we subjected rubber particles with diameters of 1.18 mm and 0.6 mm to incubation in flask bioreactors containing a mineral medium with thiosulfate and acetate and inoculated them with a microbial culture from waste-activated sludge. The near-stoichiometric oxidation of thiosulfate to sulfate was observed in the bioreactors. Most notably, two of the most potent rubber-degrading bacteria (Gordonia and Nocardia) were found to be significantly enriched in the medium. In the absence of added thiosulfate in the medium, sulfate production, likely from the desulfurization of the rubber, was also observed. Microbial etching increased the surface polarity of rubber particles, enhancing their interactions with bitumen. This was evidenced by an 82% reduction in rubber-bitumen separation when 1.18 mm microbially etched rubber was used. The study outcomes provide supporting evidence for a rubber recycling method that is environmentally friendly and has a low cost, promoting pavement sustainability and resource conservation.

Ecological risk assessment of heavy metals in desulfurized seawater discharged from a coal-fired power plant in Qingdao.

Despite the prevalence of discharge of large volumes of heavy-metal-bearing seawater from coal-fired power plants into adjacent seas, studies on the associated ecological risks remain limited. This study continuously monitored concentrations of seven heavy metals (i.e. As, Cd, Cr, Cu, Hg, Pb, and Zn) in surface seawater near the outfall of a coal-fired power plant in Qingdao, China over three years. The results showed average concentrations of As, Cd, Cr, Cu, Hg, Pb, and Zn of 2.63, 0.33, 2.97, 4.63, 0.008, 0.85, and 25.00 µg/L, respectively. Given the lack of data on metal toxicity to local species, this study investigated species composition and biomass near discharge outfalls and constructed species sensitivity distribution (SSD) curves with biological flora characteristics. Hazardous concentrations for 5% of species (HC5) for As, Cd, Cr, Cu, Hg, Pb, and Zn derived from SSDs constructed from chronic toxicity data for native species were 3.23, 2.22, 0.06, 2.83, 0.66, 4.70, and 11.07 µg/L, respectively. This study further assessed ecological risk of heavy metals by applying the Hazard Quotient (HQ) and Joint Probability Curve (JPC) based on long-term heavy metal exposure data and chronic toxicity data for local species. The results revealed acceptable levels of ecological risk for As, Cd, Hg, and Pb, but unacceptable levels for Cr, Cu, and Zn. The order of studied heavy metals in terms of ecological risk was Cr > Cu ≈ Zn > As > Cd ≈ Pb > Hg. The results of this study can guide the assessment of ecological risk at heavy metal contaminated sites characterized by relatively low heavy metal concentrations and high discharge volumes, such as receiving waters of coal-fired power plant effluents.

CoII-catalysed synthesis of N-(4-meth-oxy-phen-yl)-5-(pyridin-4-yl)-1,3,4-oxa-diazol-2-amine hemi-hydro-chloride monohydrate.

The title compound, C14H12N4O2·0.5HCl·H2O or H(C14H12N4O2)2 +·Cl-·2H2O, arose from the unexpected cyclization of isonicotinoyl-N-phenyl hydrazine carbo-thio-amide catalysed by cobalt(II) acetate. The organic mol-ecule is almost planar and a symmetric N⋯H+⋯N hydrogen bond links two of them together, with the H atom lying on a crystallographic twofold axis. The extended structure features N-H⋯O and O-H⋯Cl hydrogen bonds, which generate [001] chains. Weak C-H⋯Cl inter-actions cross-link the chains. The chloride ion has site symmetry 2. The major contributions to the Hirshfeld surface are from H⋯H (47.1%), Cl⋯H/H⋯Cl (total 10.8%), O⋯H/H⋯O (7.4%) and N⋯H/H⋯N (6.7%) inter-actions.

Modulator-assisted solvent-free synthesis of amorphous zirconium terephthalate catalyst for efficient oxidative desulfurization.

Oxidative desulfurization (ODS) emerges as a critical player in enhancing efficient fuel desulfurization and promoting sustainable clean energy. Metal-organic frameworks (MOFs) show great potential as ODS catalysts because of their exceptional porosity and versatility. This study explores the use of amorphous metal-organic frameworks (aMOFs), which combine MOFs' structural advantages with unique properties of amorphous materials, to enhance catalytic efficiency in ODS. Traditional methods for synthesizing MOFs rely on solvent-thermal or solvent-free methods, each with limitations in environmental impact or scalability. To address this, we introduce a novel strategy utilizing a small quantity of benzoic acid (BA) modifier to facilitate the solvent-free, one-pot, mechanical synthesis of amorphous zirconium terephthalate (GU-2BA-3h). The resulting GU-2BA-3h demonstrates exceptional ODS performance, efficiently removing 1000 ppm of dibenzothiophene (DBT) in just 6 min at 60 °C. Amorphous GU-2BA-3h features an expanded external surface area, increased acidic sites, and exceptional stability, resulting in a high turnover frequency (19.6 h-1) and outstanding catalytic activity (53.2 mmol g-1 h-1), establishing it as a highly efficient ODS catalyst. This remarkable performance arises from the formation of dangling carboxyl groups and active metal sites due to the competitive coordination of benzoic acid with the linker. Experimental evidence confirms that these carboxyl groups and exposed Zr-OH sites interact with oxidants, generating hydroxyl radicals that effectively eliminate sulfur-containing compounds. Furthermore, the methodology exhibits universality in constructing amorphous Zr-based MOFs, and provides an eco-friendly, cost-effective route for efficient ODS catalyst production.

Separation of Chloride and Sulfate Ions from Desulfurization Wastewater Using Monovalent Anions Selective Electrodialysis.

The high concentration of chloride ions in desulphurization wastewater is the primary limiting factor for its reusability. Monovalent anion selective electrodialysis (S-ED) enables the selective removal of chloride ions, thereby facilitating the reuse of desulfurization wastewater. In this study, different concentrations of NaCl and Na2SO4 were used to simulate different softened desulfurization wastewater. The effects of current density and NaCl and Na2SO4 concentration on ion flux, permselectivity (PSO42-Cl-) and specific energy consumption were studied. The results show that Selemion ASA membrane exhibits excellent permselectivity for Cl- and SO42-, with a significantly lower flux observed for SO42- compared to Cl-. Current density exerts a significant influence on ion flux; as the current density increases, the flux of SO42- also increases but at a lower rate than that of Cl-, resulting in an increase in permselectivity. When the current density reaches 25 mA/cm2, the permselectivity reaches a maximum of 50.4. The increase in NaCl concentration leads to a decrease in the SO42- flux; however, the permselectivity is reduced due to the elevated Cl-/SO42- ratio. The SO42- flux increases with the increase in Na2SO4 concentration, while the permselectivity increases with the decrease in Cl-/SO42- ratio.

New Adsorption Materials for Deep Desulfurization of Fuel Oil.

In recent years, due to the rapid growth of mankind's demand for energy, harmful gases (SOx) produced by the combustion of sulfur-containing compounds in fuel oil have caused serious problems to the ecological environment and human health. Therefore, in order to solve this hidden danger from the source, countries around the world have created increasingly strict standards for the sulfur content in fuel. Adsorption desulfurization technology has attracted wide attention due to its advantages of energy saving and low operating cost. This paper reviewed the latest research progress on various porous adsorption materials. The future challenges and research directions of adsorption materials to meet the needs of clean fuels are proposed.