Structure and Formation Mechanisms in Tantalum and Niobium Oxides in Superconducting Quantum Circuits.

Improving the qubit's lifetime (T1) is crucial for fault-tolerant quantum computing. Recent advancements have shown that replacing niobium (Nb) with tantalum (Ta) as the base metal significantly increases T1, likely due to a less lossy native surface oxide. However, understanding the formation mechanism and nature of both surface oxides is still limited. Using aberration-corrected transmission electron microscopy and electron energy loss spectroscopy, we found that Ta surface oxide has fewer suboxides than Nb oxide. We observed an abrupt oxidation state transition from Ta2O5 to Ta, as opposed to the gradual shift from Nb2O5, NbO2, and NbO to Nb, consistent with thermodynamic modeling. Additionally, amorphous Ta2O5 exhibits a closer-to-crystalline bonding nature than Nb2O5, potentially hindering H atomic diffusion toward the oxide/metal interface. Finally, we propose a loss mechanism arising from the transition between two states within the distorted octahedron in an amorphous structure, potentially causing two-level system loss. Our findings offer a deeper understanding of the differences between native amorphous Ta and Nb oxides, providing valuable insights for advancing superconducting qubits through surface oxide engineering.

Probing Defectivity Beneath the Hydrocarbon Blanket in 2D hBN Using TEM-EELS.

The controlled creation and manipulation of defects in 2D materials has become increasingly popular as a means to design and tune new material functionalities. However, defect characterization by direct atomic-scale imaging is often severely limited by surface contamination due to a blanket of hydrocarbons. Thus, analysis techniques that can characterize atomic-scale defects despite the contamination layer are advantageous. In this work, we take inspiration from X-ray absorption spectroscopy and use broad-beam electron energy loss spectroscopy (EELS) to characterize defect structures in 2D hexagonal boron nitride (hBN) based on averaged fine structure in the boron K-edge. Since EELS is performed in a transmission electron microscope (TEM), imaging can be performed in-situ to assess contamination levels and other factors such as tears in the fragile 2D sheets, which can affect the spectroscopic analysis. We demonstrate the TEM-EELS technique for 2D hBN samples irradiated with different ion types and doses, finding spectral signatures indicative of boron-oxygen bonding that can be used as a measure of sample defectiveness depending on the ion beam treatment. We propose that even in cases where surface contamination has been mitigated, the averaging-based TEM-EELS technique can be useful for efficient sample surveys to support atomically resolved EELS experiments.

Second world record for Barathronus roulei Nielsen, 2019 (Ophidiiformes, Bythitidae), from the Porcupine Bank (Northeast Atlantic).

Barathronus is a genus of blind cusk eels comprising 11 valid species. In this paper, we report the second specimen ever documented of Barathronus roulei (Bythitidae) obtained from the Porcupine Bank by R.V. Vizconde de Eza using a bottom trawl at a depth of 1349 m. Morphological description and illustrations, including a radiograph, are provided. In addition, three new sequences corresponding to three different genes, cytochrome c oxidase subunit I (COI)-DNA barcoding, 16S ribosomal RNA (16S), and recombination activating protein 1 (RAG1), have been added to the molecular repositories, representing the first sequences for the species.

Probing Correlation of Optical Emission and Defect Sites in Hexagonal Boron Nitride by High-Resolution STEM-EELS.

Optically bright emitters in hexagonal boron nitride (hBN) often acting as a source of a single-photon are mostly attributed to point-defect centers, featuring localized intra-bandgap electronic states. Although vacancies, anti-sites, and impurities have been proposed as candidates, the exact physical and chemical nature of most hBN single-photon emitters (SPEs) within the visible region are still up for debate. Combining site-specific high-angle annular dark-field imaging (HAADF) with electron energy loss spectroscopy (EELS), we resolve and identify a few carbon substitutions among neighboring hBN hexagons, all within the same sample region, from which typical defect emission is observed. Our experimental results are further supported by first-principles calculations, through which the stability and possible optical transitions of the proposed carbon-defect complex are assessed. The presented correlation between optical emission and defects provides valuable information toward the controlled creation of emitters in hBN, highlighting carbon complexes as another probable cause of its visible SPEs.

Probing the Polarization of Low-Energy Excitations in 2D Materials from Atomic Crystals to Nanophotonic Arrays Using Momentum-Resolved Electron Energy Loss Spectroscopy.

Spectroscopies utilizing free electron beams as probes offer detailed information on the reciprocal-space excitations of 2D materials such as graphene and transition metal dichalcogenide monolayers. Yet, despite the attention paid to such quantum materials, less consideration has been given to the electron-beam characterization of 2D periodic nanostructures such as photonic crystals, metasurfaces, and plasmon arrays, which can exhibit the same lattice and excitation symmetries as their atomic analogues albeit at drastically different length, momentum, and energy scales. Because of their lack of covalent bonding and influence of retarded electromagnetic interactions, important physical distinctions arise that complicate interpretation of scattering signals. Here we present a fully-retarded theoretical framework for describing the inelastic scattering of wide-field electron beams from 2D materials and apply it to investigate the complementarity in sample excitation information gained in the measurement of a honeycomb plasmon array versus angle-resolved optical spectroscopy in comparison to single monolayer graphene.

Hidden Impurities Generate False Positives in Single Atom Catalyst Imaging.

Single-atom catalysts (SACs) are an emerging class of materials, leveraging maximum atom utilization and distinctive structural and electronic properties to bridge heterogeneous and homogeneous catalysis. Direct imaging methods, such as aberration-corrected high-angle annular dark-field scanning transmission electron microscopy, are commonly applied to confirm the atomic dispersion of active sites. However, interpretations of data from these techniques can be challenging due to simultaneous contributions to intensity from impurities introduced during synthesis processes, as well as any variation in position relative to the focal plane of the electron beam. To address this matter, this paper presents a comprehensive study on two representative SACs containing isolated nickel or copper atoms. Spectroscopic techniques, including X-ray absorption spectroscopy, were employed to prove the high metal dispersion of the catalytic atoms. Employing scanning transmission electron microscopy imaging combined with single-atom-sensitive electron energy loss spectroscopy, we scrutinized thin specimens of the catalysts to provide an unambiguous chemical identification of the observed single-atom species and thereby distinguish impurities from active sites at the single-atom level. Overall, the study underscores the complexity of SACs characterization and establishes the importance of the use of spectroscopy in tandem with imaging at atomic resolution to fully and reliably characterize single-atom catalysts.

Nanoscale mapping of residual stresses in Al 2024 alloys using correlative and multimodal scanning transmission electron microscopy.

A methodology for the mapping of residual stresses in metal alloys has been developed by analyzing an isotropic and homogeneous Al2024 alloy with scanning transmission electron microscopy (STEM), combined with diffraction (4DSTEM) and electron energy loss spectroscopy (STEM-EELS) techniques of TEM. The investigations on the alloy's microstructure and elemental distributions were also carried out with conventional dark-field STEM (DFSTEM) and X-ray energy dispersive (EDS) techniques, respectively. Using the STEM-EELS technique, the Young's modulus (YM) is mapped in the (001) plane of the Al alloy in the same regions where the residual strain maps are generated in [1‾ 00] and [010] directions by using 4DSTEM technique. The YM vs. residual strain plot for the Al 2024 alloy revealed that the value of YM decreased by about ∼ 7 % after the tensile residual strain reached 0.02 %. Whereas such a decrease in YM happens after the compressively residual strain reaches -0.015 %. The residual stress maps were also obtained in accordance with the Hooke's law i.e., by multiplying YM map with the corresponding residual strain maps.

Unveiling Enhanced PEC Water Oxidation: Morphology Tuning and Interfacial Phase Change in α-Fe2O3@K-OMS-2 Branched Core-Shell Nanoarrays.

A simple fabrication method that involves two steps of hydrothermal reaction has been demonstrated for the growth of α-Fe2O3@K-OMS-2 branched core-shell nanoarrays. Different reactant concentrations in the shell-forming step led to different morphologies in the resultant composites, denoted as 0.25 OC, 0.5 OC, and 1.0 OC. Both 0.25 OC and 0.5 OC formed perfect branched core-shell structures, with 0.5 OC possessing longer branches, which were observed by SEM and TEM. The core K-OMS-2 and shell α-Fe2O3 were confirmed by grazing incidence X-ray diffraction (GIXRD), EDS mapping, and atomic alignment from high-resolution STEM images. Further investigation with high-resolution HAADF-STEM, EELS, and XPS indicated the existence of an ultrathin layer of Mn3O4 sandwiched at the interface. All composite materials offered greatly enhanced photocurrent density at 1.23 VRHE, compared to the pristine Fe2O3 photoanode (0.33 mA/cm2), and sample 0.5 OC showed the highest photocurrent density of 2.81 mA/cm2. Photoelectrochemical (PEC) performance was evaluated for the samples by conducting linear sweep voltammetry (LSV), applied bias photo-to-current efficiency (ABPE), electrochemical impedance spectroscopy (EIS), incident-photo-to-current efficiency (IPCE), transient photocurrent responses, and stability tests. The charge separation and transfer efficiencies, together with the electrochemically active surface area, were also investigated. The significant enhancement in sample 0.5 OC is ascribed to the synergetic effect brought by the longer branches in the core-shell structure, the conductive K-OMS-2 core, and the formation of the Mn3O4 thin layer formed between the core and shell.

Singular and Nonsingular Transitions in the Infrared Plasmons of Nearly Touching Nanocube Dimers.

Narrow gaps between plasmon-supporting materials can confine infrared electromagnetic energy at the nanoscale, thus enabling applications in areas such as optical sensing. However, in nanoparticle dimers, the nature of the transition between touching (zero gap) and nearly nontouching (nonzero gap ≲15 nm) regimes is still a subject of debate. Here, we observe both singular and nonsingular transitions in infrared plasmons confined to dimers of fluorine-doped indium oxide nanocubes when moving from touching to nontouching configurations depending on the dimensionality of the contact region. Through spatially resolved electron energy-loss spectroscopy, we find a continuous spectral evolution of the lowest-order plasmon mode across the transition for finite touching areas, in excellent agreement with the simulations. This behavior challenges the widely accepted idea that a singular transition always emerges in the near-touching regime of plasmonic particle dimers. The apparent contradiction is resolved by theoretically examining different types of gap morphologies, revealing that the presence of a finite touching area renders the transition nonsingular, while one-dimensional and point-like contacts produce a singular behavior in which the lowest-order dipolar mode in the touching configuration, characterized by a net induced charge in each of the particles, becomes unphysical as soon as they are separated. Our results provide valuable insights into the nature of dimer plasmons in highly doped semiconductors.

Momentum-resolved EELS and CL study on 1D-plasmonic crystal prepared by FIB method.

We investigate a one-dimensional plasmonic crystal (1D PlC) using momentum-resolved electron energy loss spectroscopy (EELS) and cathodoluminescence (CL) techniques, which are complementary in terms of available optical information. The PlC sample is fabricated from large aluminum grains through the focused ion beam (FIB) method. This approach allows curving nanostructures with high crystallinity, providing platforms for detailed analysis of plasmonic nanostructures using both EELS and CL. The momentum-resolved EELS visualizes dispersion curves outside the light cone, confirming the existence of the surface plasmon polaritons (SPP) and local modes, while the momentum-resolved CL mapping analysis identified these SPP and local modes. Such synergetic approach of two electron-beam techniques offers full insights into both radiative and non-radiative optical properties in plasmonic or photonic structures.

Microscopic chemical characterization of epoxy resin with scanning transmission electron microscopy - electron energy-loss spectroscopy.

The structural characterization of epoxy resins is essential to improve the understanding on their structure-property relationship for promising high-performance applications. Among all analytical techniques, scanning transmission electron microscopy-electron energy-loss spectroscopy (STEM-EELS) is a powerful tool for probing the chemical and structural information of various materials at a high spatial resolution. However, for sensitive materials, such as epoxy resins, the structural damage induced by electron-beam irradiation limits the spatial resolution in the STEM-EELS analysis. In this study, we demonstrated the extraction of the intrinsic features and structural characteristics of epoxy resins by STEM-EELS under electron doses below 1 e-/Å2 at room temperature. The reliability of the STEM-EELS analysis was confirmed by X-ray absorption spectroscopy and spectrum simulation as low- or non-damaged reference data. The investigation of the dependence of the epoxy resin on the electron dose and exposure time revealed the structural degradation associated with electron-beam irradiation, exploring the prospect of EELS for examining epoxy resin at low doses. Furthermore, the degradation mechanisms in the epoxy resin owing to electron-beam irradiation were revealed. These findings can promote the structural characterization of epoxy-resin-based composites and other soft materials.

Characteristic Plasmon Energies for 2D In2Se3 Phase Identification at Nanoscale.

Two-dimensional (2D) materials with competing polymorphs offer remarkable potential to switch the associated 2D functionalities for novel device applications. Probing their phase transition and competition mechanisms requires nanoscale characterization techniques that can sensitively detect the nucleation of secondary phases down to single-layer thickness. Here we demonstrate nanoscale phase identification on 2D In2Se3 polymorphs, utilizing their distinct plasmon energies that can be distinguished by electron energy-loss spectroscopy (EELS). The characteristic plasmon energies of In2Se3 polymorphs have been validated by first-principles calculations, and also been successfully applied to reveal phase transitions using in situ EELS. Correlating with in situ X-ray diffraction, we further derive a subtle difference in the valence electron density of In2Se3 polymorphs, consistent with their disparate electronic properties. The nanometer resolution and independence of orientation make plasmon-energy mapping a versatile technique for nanoscale phase identification on 2D materials.

Role of Curvature in Stabilizing Boron-Doped Nanocorrugated Graphene.

Boron-doped carbon nanostructures have attracted great interest recently because of their remarkable electrocatalytic performance comparable to or better than that of conventional metal catalysts. In a previous work (Carbon 123, 605 (2017)), we reported that along with significant performance improvement, B doping enhances the oxidation resistance of few-layer graphene (FLG) that provides increased structural stability for intermediate-temperature fuel-cell electrodes. In general, detailed characterization of the atomic and electronic structure transformations that occur in B-doped carbon nanostructures during fuel-cell operation is lacking. In this work, we use aberration-corrected scanning transmission electron microscopy, nanobeam electron diffraction, and electron energy-loss spectroscopy (EELS) to characterize the atomic and electronic structures of B-doped FLG before and after fuel-cell operation. These data point to the nanoscale corrugation of B-doped FLGs as the key factor responsible for increased stability and high corrosion resistance. The similarity of the 1s to π* and σ* transition features in the B K-edge EELS to those in B-doped carbon nanotubes provides an estimate for the curvature of nanocorrugation in B-FLG.

Probing Oxidation-Driven Amorphized Surfaces in a Ta(110) Film for Superconducting Qubit.

Recent advances in superconducting qubit technology have led to significant progress in quantum computing, but the challenge of achieving a long coherence time remains. Despite the excellent lifetime performance that tantalum (Ta) based qubits have demonstrated to date, the majority of superconducting qubit systems, including Ta-based qubits, are generally believed to have uncontrolled surface oxidation as the primary source of the two-level system loss in two-dimensional transmon qubits. Therefore, atomic-scale insight into the surface oxidation process is needed to make progress toward a practical quantum processor. In this study, the surface oxidation mechanism of native Ta films and its potential impact on the lifetime of superconducting qubits were investigated using advanced scanning transmission electron microscopy (STEM) techniques combined with density functional theory calculations. The results suggest an atomistic model of the oxidized Ta(110) surface, showing that oxygen atoms tend to penetrate the Ta surface and accumulate between the two outermost Ta atomic planes; oxygen accumulation at the level exceeding a 1:1 O/Ta ratio drives disordering and, eventually, the formation of an amorphous Ta2O5 phase. In addition, we discuss how the formation of a noninsulating ordered TaO1-δ (δ < 0.1) suboxide layer could further contribute to the losses of superconducting qubits. Subsurface oxidation leads to charge redistribution and electric polarization, potentially causing quasiparticle loss and decreased current-carrying capacity, thus affecting superconducting qubit coherence. The findings enhance the comprehension of the realistic factors that might influence the performance of superconducting qubits, thus providing valuable guidance for the development of future quantum computing hardware.

Observation of Sub-10 nm Transition Metal Dichalcogenide Nanocrystals in Rapidly Heated van der Waals Heterostructures.

Two-dimensional materials, such as transition metal dichalcogenides (TMDCs), have the potential to revolutionize the field of electronics and photonics due to their unique physical and structural properties. This research presents a novel method for synthesizing crystalline TMDCs crystals with <10 nm size using ultrafast migration of vacancies at elevated temperatures. Through in situ and ex situ processing and using atomic-level characterization techniques, we analyzed the shape, size, crystallinity, composition, and strain distribution of these nanocrystals. These nanocrystals exhibit electronic structure signatures that differ from the 2D bulk: i.e., uniform mono- and multilayers. Further, our in situ, vacuum-based synthesis technique allows observation and comparison of defect and phase evolution in these crystals formed under van der Waals heterostructure confinement versus unconfined conditions. Overall, this research demonstrates a solid-state route to synthesizing uniform nanocrystals of TMDCs and lays the foundation for materials science in confined 2D spaces under extreme conditions.

Molybdenum Chloride Nanostructures with Giant Lattice Distortions Intercalated into Bilayer Graphene.

The nanospace of the van der Waals (vdW) gap between structural units of two-dimensional (2D) materials serves as a platform for growing unusual 2D systems through intercalation and studying their properties. Various kinds of metal chlorides have previously been intercalated for tuning the properties of host layered materials, but the atomic structure of the intercalants remains still unidentified. In this study, we investigate the atomic structural transformation of molybdenum(V) chloride (MoCl5) after intercalation into bilayer graphene (BLG). Using scanning transmission electron microscopy, we found that the intercalated material represents MoCl3 networks, MoCl2 chains, and Mo5Cl10 rings. Giant lattice distortions and frequent structural transitions occur in the 2D MoClx that have never been observed in metal chloride systems. The trend of symmetric to nonsymmetric structural transformations can cause additional charge transfer from BLG to the intercalated MoClx, as suggested by our density functional theory calculations. Our study deepens the understanding of the behavior of matter in the confined space of the vdW gap in BLG and provides hints at a more efficient tuning of material properties by intercalation for potential applications, including transparent conductive films, optoelectronics, and energy storage.

Electric-Eel-Type Bi-Ionic Gradient Battery.

Electric eels generate electricity with a discharge voltage of up to 860 V under ionic gradients, providing a fascinating example to inspire viable and flexible power sources. However, hitherto reported eel-related devices are strictly restricted by complicated fabrication and environmental energy input. Herein, an electric-eel-type bi-ionic gradient battery (BGB) is performed by cationic and anionic polyelectrolyte hydrogels featuring simplified units and self-energy supply. Benefiting from ionic bonds with opposite charges in the polymer chain, bianion gradients as well as ion selective migration pathways are synchronously constructed and integrated units are enabled. As a result, an open-circuit voltage of 0.54 V and a short-circuit current density of 13 µA cm-2 are generated by a BGB unit. Moreover, a voltage output up to 60 V is derived from integrated BGB devices, demonstrating the potential to drive wearable and implantable electronics. In this case, these artificial electric systems could overcome the great challenges of environmentally friendly, biocompatible, low-cost, and soft power sources, providing in-depth insights into the development of clean and sustainable power generation technologies.

Electron Beam Induced Circularly Polarized Light Emission of Chiral Gold Nanohelices.

Chiral plasmonic nanostructures possess a chiroptical response orders of magnitude stronger than that of natural biomolecular systems, making them highly promising for a wide range of biochemical, medical, and physical applications. Despite extensive efforts to artificially create and tune the chiroptical properties of chiral nanostructures through compositional and geometrical modifications, a fundamental understanding of their underlying mechanisms remains limited. In this study, we present a comprehensive investigation of individual gold nanohelices by using advanced analytical electron microscopy techniques. Our results, as determined by angle-resolved cathodoluminescence polarimetry measurements, reveal a strong correlation between the circular polarization state of the emitted far-field radiation and the handedness of the chiral nanostructure in terms of both its dominant circularity and directional intensity distribution. Further analyses, including electron energy-loss measurements and numerical simulations, demonstrate that this correlation is driven by longitudinal plasmonic modes that oscillate along the helical windings, much like straight nanorods of equal strength and length. However, due to the three-dimensional shape of the structures, these longitudinal modes induce dipolar transverse modes with charge oscillations along the short axis of the helices for certain resonance energies. Their radiative decay leads to observed emission in the visible range. Our findings provide insight into the radiative properties and underlying mechanisms of chiral plasmonic nanostructures and enable their future development and application in a wide range of fields, such as nano-optics, metamaterials, molecular physics, biochemistry, and, most promising, chiral sensing via plasmonically enhanced chiral optical spectroscopy techniques.

Structure and Chemical Composition of Soil C-Rich Al-Si-Fe Coprecipitates at Nanometer Scale.

Soil carbon stabilization is mainly driven by organo-mineral interactions. Coprecipitates, of organic matter with short-range order minerals, detected through indirect chemical extraction methods, are increasingly recognized as key carbon sequestration phases. Yet the atomic structure of these coprecipitates is still rather conceptual. We used transmission electron microscopy imaging combined with energy-dispersive X-ray and electron energy loss spectroscopy chemical mappings, which enabled direct nanoscale characterization of coprecipitates from Andosols. A comparison with reference synthetic coprecipitates showed that the natural coprecipitates were structured by an amorphous Al, Si, and Fe inorganic skeleton associated with C and were therefore even less organized than short-range order minerals usually described. These amorphous types of coprecipitates resembled previously conceptualized nanosized coprecipitates of inorganic oligomers with organics (nanoCLICs) with heterogeneous elemental proportions (of C, Al, Si, and Fe) at nanoscale. These results mark a new step in the high-resolution imaging of organo-mineral associations, while shedding further light on the mechanisms that control carbon stabilization in soil and more broadly in aquatic colloid, sediment, and extraterrestrial samples.

Automatic and Quantitative Measurement of Spectrometer Aberrations.

The performance of electron energy loss spectrometers can often be limited by their electron optical aberrations. Due to recent developments in high energy resolution and momentum-resolved electron energy loss spectroscopy (EELS), there is renewed interest in optimizing the performance of such spectrometers. For example, the "ω - q" mode of momentum-resolved EELS, which uses a small convergence angle and requires aligning diffraction spots with the slot aperture, presents a challenge in the realignments of the spectrometer required by the adjustment of the projection lenses. Automated and robust alignment can greatly benefit such a process. The first step toward this goal is automatic and quantitative measurement of spectrometer aberrations. We demonstrate the measurement of geometric aberrations and distortions in EELS within a monochromated scanning transmission electron microscope (STEM). To better understand the results, we present a wave mechanical simulation of the experiment. Using the measured aberration and distortion coefficients as inputs to the simulation, we find a good match between the simulation and experiment, verifying formulae used in the simulation. From verified simulations with known aberration coefficients, we can assess the accuracy of measurements. Understanding the errors and inaccuracies in the procedure can guide further progress in aberration measurement and correction for new spectrometer developments.